From c56ae22db09e76db6e05d16dcc7637958ab88b1b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Fri, 28 Feb 2020 19:59:52 +0100 Subject: bcm27xx: update to latest patches from RPi foundation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Álvaro Fernández Rojas --- target/linux/bcm27xx/bcm2709/config-4.19 | 1 + target/linux/bcm27xx/bcm2710/config-4.19 | 1 + target/linux/bcm27xx/bcm2711/config-4.19 | 1 + ...950-0786-add-BME680-to-i2c-sensor-overlay.patch | 67 ++ ...950-0787-add-BME680-to-i2c-sensor-overlay.patch | 67 -- ...strain-endpoint-max-packet-and-transfer-s.patch | 43 ++ ...strain-endpoint-max-packet-and-transfer-s.patch | 43 -- ..._fsm-pause-when-cancelling-split-transact.patch | 95 +++ ..._fsm-add-a-barrier-on-entry-into-FIQ-hand.patch | 49 ++ ..._fsm-pause-when-cancelling-split-transact.patch | 95 --- ...ersal-device-tree-overlay-for-SPI-devices.patch | 273 ++++++++ ..._fsm-add-a-barrier-on-entry-into-FIQ-hand.patch | 49 -- ...ersal-device-tree-overlay-for-SPI-devices.patch | 273 -------- ...91-sound-Add-the-HiFiBerry-DAC-HD-version.patch | 776 +++++++++++++++++++++ ...nitialise-rpi-firmware-before-clk-bcm2835.patch | 47 ++ ...92-sound-Add-the-HiFiBerry-DAC-HD-version.patch | 776 --------------------- ...mode-settings-of-HiFiBerry-DAC-ADC-PRO-ca.patch | 26 + ...nitialise-rpi-firmware-before-clk-bcm2835.patch | 47 -- ...mode-settings-of-HiFiBerry-DAC-ADC-PRO-ca.patch | 26 - ...overlays-Use-preferred-compatible-strings.patch | 72 ++ ...overlays-Use-preferred-compatible-strings.patch | 72 -- ...95-tty-amba-pl011-Add-un-throttle-support.patch | 61 ++ .../950-0796-Fix-i2c-pwm-pca9685a-overlay.patch | 20 + ...96-tty-amba-pl011-Add-un-throttle-support.patch | 61 -- .../950-0797-Fix-i2c-pwm-pca9685a-overlay.patch | 20 - ...F-feature-to-HiFiBerry-DAC-ADC-PRO-sound-.patch | 89 +++ ...F-feature-to-HiFiBerry-DAC-ADC-PRO-sound-.patch | 89 --- ...F-feature-to-HiFiBerry-DAC-ADC-sound-card.patch | 76 ++ ...F-feature-to-HiFiBerry-DAC-ADC-sound-card.patch | 76 -- ...F-feature-to-HiFiBerry-DAC-DAC-PRO-sound-.patch | 77 ++ ...F-feature-to-HiFiBerry-DAC-DAC-PRO-sound-.patch | 77 -- ...ed-reading-Pisound-board-hardware-revisio.patch | 201 ++++++ ...-sdhci-iproc-Fix-vmmc-regulators-on-iProc.patch | 46 ++ ...ed-reading-Pisound-board-hardware-revisio.patch | 201 ------ ...ts-Declare-RPi-4B-SD-card-power-regulator.patch | 43 ++ ...-sdhci-iproc-Fix-vmmc-regulators-on-iProc.patch | 46 -- ...ts-Declare-RPi-4B-SD-card-power-regulator.patch | 43 -- ...tb-Bounce-buffer-support-is-for-BCM2711B0.patch | 88 +++ ...8.dtsi-Use-BCM2711-PCIe-compatible-string.patch | 29 + ...tb-Bounce-buffer-support-is-for-BCM2711B0.patch | 88 --- ...0-0805-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch | 146 ++++ ...8.dtsi-Use-BCM2711-PCIe-compatible-string.patch | 29 - ...0-0806-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch | 146 ---- ...ba-pl011-Avoid-rare-write-when-full-error.patch | 42 ++ ...ba-pl011-Avoid-rare-write-when-full-error.patch | 42 -- ...xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch | 84 +++ ...ys-Correct-the-eth_led-colour-assignments.patch | 51 ++ ...xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch | 84 --- ...ys-Correct-the-eth_led-colour-assignments.patch | 51 -- ...9-overlays-Remove-hack-from-uart0-overlay.patch | 45 ++ ...-Add-sd_poll_once-dtparam-to-bcm283x-2711.patch | 59 ++ ...0-overlays-Remove-hack-from-uart0-overlay.patch | 45 -- ...-Add-sd_poll_once-dtparam-to-bcm283x-2711.patch | 59 -- ...811-overlays-Add-ssd1306-spi-overlay-3440.patch | 132 ++++ ...d-sh1106-spi-and-ssd1351-spi-overlays-344.patch | 248 +++++++ ...812-overlays-Add-ssd1306-spi-overlay-3440.patch | 132 ---- ...d-sh1106-spi-and-ssd1351-spi-overlays-344.patch | 248 ------- ...-0813-overlays-dwc2-Increase-RX-FIFO-size.patch | 32 + ...14-overlays-Fix-mcp23017-s-addr-parameter.patch | 46 ++ ...-0814-overlays-dwc2-Increase-RX-FIFO-size.patch | 32 - ...15-overlays-Fix-mcp23017-s-addr-parameter.patch | 46 -- ...x-sh1106-spi-ssd1306-spi-and-ssd1351-spi-.patch | 81 +++ ...1106-spi-ssd1306-spi-ssd1351-spi-overlays.patch | 50 ++ ...x-sh1106-spi-ssd1306-spi-and-ssd1351-spi-.patch | 81 --- ...1106-spi-ssd1306-spi-ssd1351-spi-overlays.patch | 50 -- ...950-0817-overlays-Update-upstream-overlay.patch | 23 + ...ys-add-hdmi-backlight-hwhack-gpio-overlay.patch | 106 +++ ...Add-timeout_ms-parameter-to-gpio-poweroff.patch | 34 + ...820-of-overlay-Correct-symbol-path-fixups.patch | 37 + ...0-0821-ASoC-sgtl5000-add-ADC-mute-control.patch | 28 + ...-Remove-virtgpio-from-bcm2711-rpi-4-b.dts.patch | 33 + 71 files changed, 3458 insertions(+), 3194 deletions(-) create mode 100644 target/linux/bcm27xx/patches-4.19/950-0786-add-BME680-to-i2c-sensor-overlay.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0787-add-BME680-to-i2c-sensor-overlay.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0787-dwc_otg-constrain-endpoint-max-packet-and-transfer-s.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0788-dwc_otg-constrain-endpoint-max-packet-and-transfer-s.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0788-dwc_otg-fiq_fsm-pause-when-cancelling-split-transact.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0789-dwc_otg-fiq_fsm-add-a-barrier-on-entry-into-FIQ-hand.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0789-dwc_otg-fiq_fsm-pause-when-cancelling-split-transact.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0790-Add-universal-device-tree-overlay-for-SPI-devices.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0790-dwc_otg-fiq_fsm-add-a-barrier-on-entry-into-FIQ-hand.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0791-Add-universal-device-tree-overlay-for-SPI-devices.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0791-sound-Add-the-HiFiBerry-DAC-HD-version.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0792-Initialise-rpi-firmware-before-clk-bcm2835.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0792-sound-Add-the-HiFiBerry-DAC-HD-version.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0793-Fix-master-mode-settings-of-HiFiBerry-DAC-ADC-PRO-ca.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0793-Initialise-rpi-firmware-before-clk-bcm2835.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0794-Fix-master-mode-settings-of-HiFiBerry-DAC-ADC-PRO-ca.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0794-overlays-Use-preferred-compatible-strings.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0795-overlays-Use-preferred-compatible-strings.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0795-tty-amba-pl011-Add-un-throttle-support.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0796-Fix-i2c-pwm-pca9685a-overlay.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0796-tty-amba-pl011-Add-un-throttle-support.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0797-Fix-i2c-pwm-pca9685a-overlay.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0797-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-PRO-sound-.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0798-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-PRO-sound-.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0798-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-sound-card.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0799-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-sound-card.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0799-adds-LED-OFF-feature-to-HiFiBerry-DAC-DAC-PRO-sound-.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0800-adds-LED-OFF-feature-to-HiFiBerry-DAC-DAC-PRO-sound-.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0800-pisound-Added-reading-Pisound-board-hardware-revisio.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0801-mmc-sdhci-iproc-Fix-vmmc-regulators-on-iProc.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0801-pisound-Added-reading-Pisound-board-hardware-revisio.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0802-ARM-dts-Declare-RPi-4B-SD-card-power-regulator.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0802-mmc-sdhci-iproc-Fix-vmmc-regulators-on-iProc.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0803-ARM-dts-Declare-RPi-4B-SD-card-power-regulator.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0803-pcie-brcmstb-Bounce-buffer-support-is-for-BCM2711B0.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0804-bcm2838.dtsi-Use-BCM2711-PCIe-compatible-string.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0804-pcie-brcmstb-Bounce-buffer-support-is-for-BCM2711B0.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0805-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0805-bcm2838.dtsi-Use-BCM2711-PCIe-compatible-string.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0806-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0806-tty-amba-pl011-Avoid-rare-write-when-full-error.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0807-tty-amba-pl011-Avoid-rare-write-when-full-error.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0807-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0808-overlays-Correct-the-eth_led-colour-assignments.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0808-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0809-overlays-Correct-the-eth_led-colour-assignments.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0809-overlays-Remove-hack-from-uart0-overlay.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0810-ARM-dts-Add-sd_poll_once-dtparam-to-bcm283x-2711.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0810-overlays-Remove-hack-from-uart0-overlay.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0811-ARM-dts-Add-sd_poll_once-dtparam-to-bcm283x-2711.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0811-overlays-Add-ssd1306-spi-overlay-3440.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0812-overlays-Add-sh1106-spi-and-ssd1351-spi-overlays-344.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0812-overlays-Add-ssd1306-spi-overlay-3440.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0813-overlays-Add-sh1106-spi-and-ssd1351-spi-overlays-344.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0813-overlays-dwc2-Increase-RX-FIFO-size.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0814-overlays-Fix-mcp23017-s-addr-parameter.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0814-overlays-dwc2-Increase-RX-FIFO-size.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0815-overlays-Fix-mcp23017-s-addr-parameter.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0815-overlays-fix-sh1106-spi-ssd1306-spi-and-ssd1351-spi-.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0816-Fix-a-sh1106-spi-ssd1306-spi-ssd1351-spi-overlays.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0816-overlays-fix-sh1106-spi-ssd1306-spi-and-ssd1351-spi-.patch delete mode 100644 target/linux/bcm27xx/patches-4.19/950-0817-Fix-a-sh1106-spi-ssd1306-spi-ssd1351-spi-overlays.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0817-overlays-Update-upstream-overlay.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0818-overlays-add-hdmi-backlight-hwhack-gpio-overlay.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0819-overlays-Add-timeout_ms-parameter-to-gpio-poweroff.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0820-of-overlay-Correct-symbol-path-fixups.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0821-ASoC-sgtl5000-add-ADC-mute-control.patch create mode 100644 target/linux/bcm27xx/patches-4.19/950-0822-ARM-dts-Remove-virtgpio-from-bcm2711-rpi-4-b.dts.patch (limited to 'target/linux/bcm27xx') diff --git a/target/linux/bcm27xx/bcm2709/config-4.19 b/target/linux/bcm27xx/bcm2709/config-4.19 index c51fa3b835..b164d0ede9 100644 --- a/target/linux/bcm27xx/bcm2709/config-4.19 +++ b/target/linux/bcm27xx/bcm2709/config-4.19 @@ -177,6 +177,7 @@ CONFIG_DUMMY_CONSOLE=y CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_EXT4_ENCRYPTION=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y diff --git a/target/linux/bcm27xx/bcm2710/config-4.19 b/target/linux/bcm27xx/bcm2710/config-4.19 index 22698986a8..39b72d240a 100644 --- a/target/linux/bcm27xx/bcm2710/config-4.19 +++ b/target/linux/bcm27xx/bcm2710/config-4.19 @@ -213,6 +213,7 @@ CONFIG_DTC=y CONFIG_DUMMY_CONSOLE=y CONFIG_EDAC_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_EXT4_ENCRYPTION=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y diff --git a/target/linux/bcm27xx/bcm2711/config-4.19 b/target/linux/bcm27xx/bcm2711/config-4.19 index 9d4671de8d..03c1871052 100644 --- a/target/linux/bcm27xx/bcm2711/config-4.19 +++ b/target/linux/bcm27xx/bcm2711/config-4.19 @@ -217,6 +217,7 @@ CONFIG_DTC=y CONFIG_DUMMY_CONSOLE=y CONFIG_EDAC_SUPPORT=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_EXT4_ENCRYPTION=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y diff --git a/target/linux/bcm27xx/patches-4.19/950-0786-add-BME680-to-i2c-sensor-overlay.patch b/target/linux/bcm27xx/patches-4.19/950-0786-add-BME680-to-i2c-sensor-overlay.patch new file mode 100644 index 0000000000..55e34e288b --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0786-add-BME680-to-i2c-sensor-overlay.patch @@ -0,0 +1,67 @@ +From ca88aee39825dd81ef1e8306b5947c5ae3918d1a Mon Sep 17 00:00:00 2001 +From: Willem Remie +Date: Thu, 9 Jan 2020 21:16:49 +0100 +Subject: [PATCH] add BME680 to i2c-sensor overlay + +--- + arch/arm/boot/dts/overlays/README | 7 +++++-- + .../boot/dts/overlays/i2c-sensor-overlay.dts | 19 ++++++++++++++++++- + 2 files changed, 23 insertions(+), 3 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -1159,12 +1159,15 @@ Name: i2c-sensor + Info: Adds support for a number of I2C barometric pressure and temperature + sensors on i2c_arm + Load: dtoverlay=i2c-sensor,= +-Params: addr Set the address for the BME280, BMP280, DS1621, +- HDC100X, LM75, SHT3x or TMP102 ++Params: addr Set the address for the BME280, BME680, BMP280, ++ DS1621, HDC100X, LM75, SHT3x or TMP102 + + bme280 Select the Bosch Sensortronic BME280 + Valid addresses 0x76-0x77, default 0x76 + ++ bme680 Select the Bosch Sensortronic BME680 ++ Valid addresses 0x76-0x77, default 0x76 ++ + bmp085 Select the Bosch Sensortronic BMP085 + + bmp180 Select the Bosch Sensortronic BMP180 +--- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts +@@ -216,10 +216,26 @@ + }; + }; + ++ fragment@14 { ++ target = <&i2c_arm>; ++ __dormant__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ bme680: bme680@76 { ++ compatible = "bosch,bme680"; ++ reg = <0x76>; ++ status = "okay"; ++ }; ++ }; ++ }; ++ ++ + __overrides__ { + addr = <&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0", + <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0", +- <&ds1621>,"reg:0"; ++ <&ds1621>,"reg:0", <&bme680>,"reg:0"; + bme280 = <0>,"+0"; + bmp085 = <0>,"+1"; + bmp180 = <0>,"+2"; +@@ -235,5 +251,6 @@ + sht3x = <0>,"+11"; + ds1621 = <0>,"+12"; + max17040 = <0>,"+13"; ++ bme680 = <0>,"+14"; + }; + }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0787-add-BME680-to-i2c-sensor-overlay.patch b/target/linux/bcm27xx/patches-4.19/950-0787-add-BME680-to-i2c-sensor-overlay.patch deleted file mode 100644 index 55e34e288b..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0787-add-BME680-to-i2c-sensor-overlay.patch +++ /dev/null @@ -1,67 +0,0 @@ -From ca88aee39825dd81ef1e8306b5947c5ae3918d1a Mon Sep 17 00:00:00 2001 -From: Willem Remie -Date: Thu, 9 Jan 2020 21:16:49 +0100 -Subject: [PATCH] add BME680 to i2c-sensor overlay - ---- - arch/arm/boot/dts/overlays/README | 7 +++++-- - .../boot/dts/overlays/i2c-sensor-overlay.dts | 19 ++++++++++++++++++- - 2 files changed, 23 insertions(+), 3 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -1159,12 +1159,15 @@ Name: i2c-sensor - Info: Adds support for a number of I2C barometric pressure and temperature - sensors on i2c_arm - Load: dtoverlay=i2c-sensor,= --Params: addr Set the address for the BME280, BMP280, DS1621, -- HDC100X, LM75, SHT3x or TMP102 -+Params: addr Set the address for the BME280, BME680, BMP280, -+ DS1621, HDC100X, LM75, SHT3x or TMP102 - - bme280 Select the Bosch Sensortronic BME280 - Valid addresses 0x76-0x77, default 0x76 - -+ bme680 Select the Bosch Sensortronic BME680 -+ Valid addresses 0x76-0x77, default 0x76 -+ - bmp085 Select the Bosch Sensortronic BMP085 - - bmp180 Select the Bosch Sensortronic BMP180 ---- a/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-sensor-overlay.dts -@@ -216,10 +216,26 @@ - }; - }; - -+ fragment@14 { -+ target = <&i2c_arm>; -+ __dormant__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ bme680: bme680@76 { -+ compatible = "bosch,bme680"; -+ reg = <0x76>; -+ status = "okay"; -+ }; -+ }; -+ }; -+ -+ - __overrides__ { - addr = <&bme280>,"reg:0", <&bmp280>,"reg:0", <&tmp102>,"reg:0", - <&lm75>,"reg:0", <&hdc100x>,"reg:0", <&sht3x>,"reg:0", -- <&ds1621>,"reg:0"; -+ <&ds1621>,"reg:0", <&bme680>,"reg:0"; - bme280 = <0>,"+0"; - bmp085 = <0>,"+1"; - bmp180 = <0>,"+2"; -@@ -235,5 +251,6 @@ - sht3x = <0>,"+11"; - ds1621 = <0>,"+12"; - max17040 = <0>,"+13"; -+ bme680 = <0>,"+14"; - }; - }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0787-dwc_otg-constrain-endpoint-max-packet-and-transfer-s.patch b/target/linux/bcm27xx/patches-4.19/950-0787-dwc_otg-constrain-endpoint-max-packet-and-transfer-s.patch new file mode 100644 index 0000000000..ae110add5a --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0787-dwc_otg-constrain-endpoint-max-packet-and-transfer-s.patch @@ -0,0 +1,43 @@ +From 7ae8ef63c14ca2fea76c9db5799321f1b3e31c36 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Tue, 7 Jan 2020 10:08:19 +0000 +Subject: [PATCH] dwc_otg: constrain endpoint max packet and transfer + size on split IN + +The hcd would unconditionally set the transfer length to the endpoint +packet size for non-isoc IN transfers. If the remaining buffer length +was less than the length of returned data, random memory would get +scribbled over, with bad effects if it crossed a page boundary. + +Force a babble error if this happens by limiting the max transfer size +to the available buffer space. DMA will stop writing to memory on a +babble condition. + +The hardware expects xfersize to be an integer multiple of maxpacket +size, so override hcchar.b.mps as well. + +Signed-off-by: Jonathan Bell +--- + drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -1813,7 +1813,7 @@ int fiq_fsm_queue_split_transaction(dwc_ + st->nr_errors = 0; + + st->hcchar_copy.d32 = 0; +- st->hcchar_copy.b.mps = hc->max_packet; ++ st->hcchar_copy.b.mps = min_t(uint32_t, hc->xfer_len, hc->max_packet); + st->hcchar_copy.b.epdir = hc->ep_is_in; + st->hcchar_copy.b.devaddr = hc->dev_addr; + st->hcchar_copy.b.epnum = hc->ep_num; +@@ -1858,7 +1858,7 @@ int fiq_fsm_queue_split_transaction(dwc_ + st->hctsiz_copy.b.pid = hc->data_pid_start; + + if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { +- hc->xfer_len = hc->max_packet; ++ hc->xfer_len = min_t(uint32_t, hc->xfer_len, hc->max_packet); + } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { + hc->xfer_len = 188; + } diff --git a/target/linux/bcm27xx/patches-4.19/950-0788-dwc_otg-constrain-endpoint-max-packet-and-transfer-s.patch b/target/linux/bcm27xx/patches-4.19/950-0788-dwc_otg-constrain-endpoint-max-packet-and-transfer-s.patch deleted file mode 100644 index ae110add5a..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0788-dwc_otg-constrain-endpoint-max-packet-and-transfer-s.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 7ae8ef63c14ca2fea76c9db5799321f1b3e31c36 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Tue, 7 Jan 2020 10:08:19 +0000 -Subject: [PATCH] dwc_otg: constrain endpoint max packet and transfer - size on split IN - -The hcd would unconditionally set the transfer length to the endpoint -packet size for non-isoc IN transfers. If the remaining buffer length -was less than the length of returned data, random memory would get -scribbled over, with bad effects if it crossed a page boundary. - -Force a babble error if this happens by limiting the max transfer size -to the available buffer space. DMA will stop writing to memory on a -babble condition. - -The hardware expects xfersize to be an integer multiple of maxpacket -size, so override hcchar.b.mps as well. - -Signed-off-by: Jonathan Bell ---- - drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -@@ -1813,7 +1813,7 @@ int fiq_fsm_queue_split_transaction(dwc_ - st->nr_errors = 0; - - st->hcchar_copy.d32 = 0; -- st->hcchar_copy.b.mps = hc->max_packet; -+ st->hcchar_copy.b.mps = min_t(uint32_t, hc->xfer_len, hc->max_packet); - st->hcchar_copy.b.epdir = hc->ep_is_in; - st->hcchar_copy.b.devaddr = hc->dev_addr; - st->hcchar_copy.b.epnum = hc->ep_num; -@@ -1858,7 +1858,7 @@ int fiq_fsm_queue_split_transaction(dwc_ - st->hctsiz_copy.b.pid = hc->data_pid_start; - - if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { -- hc->xfer_len = hc->max_packet; -+ hc->xfer_len = min_t(uint32_t, hc->xfer_len, hc->max_packet); - } else if (!hc->ep_is_in && (hc->xfer_len > 188)) { - hc->xfer_len = 188; - } diff --git a/target/linux/bcm27xx/patches-4.19/950-0788-dwc_otg-fiq_fsm-pause-when-cancelling-split-transact.patch b/target/linux/bcm27xx/patches-4.19/950-0788-dwc_otg-fiq_fsm-pause-when-cancelling-split-transact.patch new file mode 100644 index 0000000000..53c93a5836 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0788-dwc_otg-fiq_fsm-pause-when-cancelling-split-transact.patch @@ -0,0 +1,95 @@ +From af6743f045159970b95f6426de13c0fb82678e67 Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Wed, 8 Jan 2020 12:48:09 +0000 +Subject: [PATCH] dwc_otg: fiq_fsm: pause when cancelling split + transactions + +Non-periodic splits will DMA to/from the driver-provided transfer_buffer, +which may be freed immediately after the dequeue call returns. Block until +we know the transfer is complete. + +A similar delay is needed when cleaning up disconnects, as the FIQ could +have started a periodic transfer in the previous microframe to the one +that triggered a disconnect. + +Signed-off-by: Jonathan Bell +--- + drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 33 +++++++++++++++++++++-- + drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 1 + + 2 files changed, 32 insertions(+), 2 deletions(-) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c +@@ -175,6 +175,7 @@ static void kill_urbs_in_qh_list(dwc_otg + dwc_list_link_t *qh_item, *qh_tmp; + dwc_otg_qh_t *qh; + dwc_otg_qtd_t *qtd, *qtd_tmp; ++ int quiesced = 0; + + DWC_LIST_FOREACH_SAFE(qh_item, qh_tmp, qh_list) { + qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry); +@@ -198,8 +199,17 @@ static void kill_urbs_in_qh_list(dwc_otg + qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE; + qh->channel->halt_pending = 1; + if (hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_TURBO || +- hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING) ++ hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING) + hcd->fiq_state->channel[n].fsm = FIQ_HS_ISOC_ABORTED; ++ /* We're called from disconnect callback or in the middle of freeing the HCD here, ++ * so FIQ is disabled, top-level interrupts masked and we're holding the spinlock. ++ * No further URBs will be submitted, but wait 1 microframe for any previously ++ * submitted periodic DMA to finish. ++ */ ++ if (!quiesced) { ++ udelay(125); ++ quiesced = 1; ++ } + } else { + dwc_otg_hc_halt(hcd->core_if, qh->channel, + DWC_OTG_HC_XFER_URB_DEQUEUE); +@@ -600,15 +610,34 @@ int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_ + /* In FIQ FSM mode, we need to shut down carefully. + * The FIQ may attempt to restart a disabled channel */ + if (fiq_fsm_enable && (hcd->fiq_state->channel[n].fsm != FIQ_PASSTHROUGH)) { ++ int retries = 3; ++ int running = 0; ++ enum fiq_fsm_state state; ++ + local_fiq_disable(); + fiq_fsm_spin_lock(&hcd->fiq_state->lock); + qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE; + qh->channel->halt_pending = 1; + if (hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_TURBO || +- hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING) ++ hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING) + hcd->fiq_state->channel[n].fsm = FIQ_HS_ISOC_ABORTED; + fiq_fsm_spin_unlock(&hcd->fiq_state->lock); + local_fiq_enable(); ++ ++ if (dwc_qh_is_non_per(qh)) { ++ do { ++ state = READ_ONCE(hcd->fiq_state->channel[n].fsm); ++ running = (state != FIQ_NP_SPLIT_DONE) && ++ (state != FIQ_NP_SPLIT_LS_ABORTED) && ++ (state != FIQ_NP_SPLIT_HS_ABORTED); ++ if (!running) ++ break; ++ udelay(125); ++ } while(--retries); ++ if (!retries) ++ DWC_WARN("Timed out waiting for FSM NP transfer to complete on %d", ++ qh->channel->hc_num); ++ } + } else { + dwc_otg_hc_halt(hcd->core_if, qh->channel, + DWC_OTG_HC_XFER_URB_DEQUEUE); +--- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h ++++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h +@@ -27,6 +27,7 @@ + #include + #include + #include ++#include + + #include + diff --git a/target/linux/bcm27xx/patches-4.19/950-0789-dwc_otg-fiq_fsm-add-a-barrier-on-entry-into-FIQ-hand.patch b/target/linux/bcm27xx/patches-4.19/950-0789-dwc_otg-fiq_fsm-add-a-barrier-on-entry-into-FIQ-hand.patch new file mode 100644 index 0000000000..dc48605cb1 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0789-dwc_otg-fiq_fsm-add-a-barrier-on-entry-into-FIQ-hand.patch @@ -0,0 +1,49 @@ +From b2d43d61a1d6d070664f10d12b3c8b6df11eb21d Mon Sep 17 00:00:00 2001 +From: Jonathan Bell +Date: Mon, 13 Jan 2020 15:54:55 +0000 +Subject: [PATCH] dwc_otg: fiq_fsm: add a barrier on entry into FIQ + handler(s) + +On BCM2835, there is no hardware guarantee that multiple outstanding +reads to different peripherals will complete in-order. The FIQ code +uses peripheral reads without barriers for performance, so in the case +where a read to a slow peripheral was issued immediately prior to FIQ +entry, the first peripheral read that the FIQ did could end up with +wrong read data returned. + +Add dsb(sy) on entry so that all outstanding reads are retired. + +The FIQ only issues reads to the dwc_otg core, so per-read barriers +in the handler itself are not required. + +On BCM2836 and BCM2837 the barrier is not strictly required due to +differences in how the peripheral bus is implemented, but having +arch-specific handlers that introduce different latencies is risky. + +Signed-off-by: Jonathan Bell +--- + drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c ++++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c +@@ -1259,6 +1259,9 @@ void notrace dwc_otg_fiq_fsm(struct fiq_ + haintmsk_data_t haintmsk; + int kick_irq = 0; + ++ /* Ensure peripheral reads issued prior to FIQ entry are complete */ ++ dsb(sy); ++ + gintsts_handled.d32 = 0; + haint_handled.d32 = 0; + +@@ -1379,6 +1382,9 @@ void notrace dwc_otg_fiq_nop(struct fiq_ + gintmsk_data_t gintmsk; + hfnum_data_t hfnum; + ++ /* Ensure peripheral reads issued prior to FIQ entry are complete */ ++ dsb(sy); ++ + fiq_fsm_spin_lock(&state->lock); + hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); + gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS); diff --git a/target/linux/bcm27xx/patches-4.19/950-0789-dwc_otg-fiq_fsm-pause-when-cancelling-split-transact.patch b/target/linux/bcm27xx/patches-4.19/950-0789-dwc_otg-fiq_fsm-pause-when-cancelling-split-transact.patch deleted file mode 100644 index 53c93a5836..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0789-dwc_otg-fiq_fsm-pause-when-cancelling-split-transact.patch +++ /dev/null @@ -1,95 +0,0 @@ -From af6743f045159970b95f6426de13c0fb82678e67 Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Wed, 8 Jan 2020 12:48:09 +0000 -Subject: [PATCH] dwc_otg: fiq_fsm: pause when cancelling split - transactions - -Non-periodic splits will DMA to/from the driver-provided transfer_buffer, -which may be freed immediately after the dequeue call returns. Block until -we know the transfer is complete. - -A similar delay is needed when cleaning up disconnects, as the FIQ could -have started a periodic transfer in the previous microframe to the one -that triggered a disconnect. - -Signed-off-by: Jonathan Bell ---- - drivers/usb/host/dwc_otg/dwc_otg_hcd.c | 33 +++++++++++++++++++++-- - drivers/usb/host/dwc_otg/dwc_otg_os_dep.h | 1 + - 2 files changed, 32 insertions(+), 2 deletions(-) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c -@@ -175,6 +175,7 @@ static void kill_urbs_in_qh_list(dwc_otg - dwc_list_link_t *qh_item, *qh_tmp; - dwc_otg_qh_t *qh; - dwc_otg_qtd_t *qtd, *qtd_tmp; -+ int quiesced = 0; - - DWC_LIST_FOREACH_SAFE(qh_item, qh_tmp, qh_list) { - qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry); -@@ -198,8 +199,17 @@ static void kill_urbs_in_qh_list(dwc_otg - qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE; - qh->channel->halt_pending = 1; - if (hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_TURBO || -- hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING) -+ hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING) - hcd->fiq_state->channel[n].fsm = FIQ_HS_ISOC_ABORTED; -+ /* We're called from disconnect callback or in the middle of freeing the HCD here, -+ * so FIQ is disabled, top-level interrupts masked and we're holding the spinlock. -+ * No further URBs will be submitted, but wait 1 microframe for any previously -+ * submitted periodic DMA to finish. -+ */ -+ if (!quiesced) { -+ udelay(125); -+ quiesced = 1; -+ } - } else { - dwc_otg_hc_halt(hcd->core_if, qh->channel, - DWC_OTG_HC_XFER_URB_DEQUEUE); -@@ -600,15 +610,34 @@ int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_ - /* In FIQ FSM mode, we need to shut down carefully. - * The FIQ may attempt to restart a disabled channel */ - if (fiq_fsm_enable && (hcd->fiq_state->channel[n].fsm != FIQ_PASSTHROUGH)) { -+ int retries = 3; -+ int running = 0; -+ enum fiq_fsm_state state; -+ - local_fiq_disable(); - fiq_fsm_spin_lock(&hcd->fiq_state->lock); - qh->channel->halt_status = DWC_OTG_HC_XFER_URB_DEQUEUE; - qh->channel->halt_pending = 1; - if (hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_TURBO || -- hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING) -+ hcd->fiq_state->channel[n].fsm == FIQ_HS_ISOC_SLEEPING) - hcd->fiq_state->channel[n].fsm = FIQ_HS_ISOC_ABORTED; - fiq_fsm_spin_unlock(&hcd->fiq_state->lock); - local_fiq_enable(); -+ -+ if (dwc_qh_is_non_per(qh)) { -+ do { -+ state = READ_ONCE(hcd->fiq_state->channel[n].fsm); -+ running = (state != FIQ_NP_SPLIT_DONE) && -+ (state != FIQ_NP_SPLIT_LS_ABORTED) && -+ (state != FIQ_NP_SPLIT_HS_ABORTED); -+ if (!running) -+ break; -+ udelay(125); -+ } while(--retries); -+ if (!retries) -+ DWC_WARN("Timed out waiting for FSM NP transfer to complete on %d", -+ qh->channel->hc_num); -+ } - } else { - dwc_otg_hc_halt(hcd->core_if, qh->channel, - DWC_OTG_HC_XFER_URB_DEQUEUE); ---- a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -+++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h -@@ -27,6 +27,7 @@ - #include - #include - #include -+#include - - #include - diff --git a/target/linux/bcm27xx/patches-4.19/950-0790-Add-universal-device-tree-overlay-for-SPI-devices.patch b/target/linux/bcm27xx/patches-4.19/950-0790-Add-universal-device-tree-overlay-for-SPI-devices.patch new file mode 100644 index 0000000000..ce027e72f0 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0790-Add-universal-device-tree-overlay-for-SPI-devices.patch @@ -0,0 +1,273 @@ +From 4d19be9132ca10cf582450a86dcb2c41f227f589 Mon Sep 17 00:00:00 2001 +From: Ed Spiridonov +Date: Tue, 10 Dec 2019 22:45:04 +0300 +Subject: [PATCH] Add universal device tree overlay for SPI devices + +Just specify the SPI address and device name ("compatible" property). +This overlay lacks any device-specific parameter support! +(some of them could be added later) + +Examples: +1. SPI NOR flash on spi0.1, maximum SPI clock frequency 45MHz: + dtoverlay=anyspi:spi0-1,dev="jedec,spi-nor",speed=45000000 +2. MCP3204 ADC on spi1.2, maximum SPI clock frequency 500kHz: + dtoverlay=anyspi:spi1-2,dev="microchip,mcp3204" + +Signed-off-by: Ed Spiridonov +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 23 ++ + arch/arm/boot/dts/overlays/anyspi-overlay.dts | 205 ++++++++++++++++++ + 3 files changed, 229 insertions(+) + create mode 100755 arch/arm/boot/dts/overlays/anyspi-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -15,6 +15,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + allo-katana-dac-audio.dtbo \ + allo-piano-dac-pcm512x-audio.dtbo \ + allo-piano-dac-plus-pcm512x-audio.dtbo \ ++ anyspi.dtbo \ + apds9960.dtbo \ + applepi-dac.dtbo \ + at86rf233.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -441,6 +441,29 @@ Params: 24db_digital_gain Allow ga + better voice quality. (default Off) + + ++Name: anyspi ++Info: Universal device tree overlay for SPI devices ++ ++ Just specify the SPI address and device name ("compatible" property). ++ This overlay lacks any device-specific parameter support! ++ ++ For devices on spi1 or spi2, the interfaces should be enabled ++ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. ++ ++ Examples: ++ 1. SPI NOR flash on spi0.1, maximum SPI clock frequency 45MHz: ++ dtoverlay=anyspi:spi0-1,dev="jedec,spi-nor",speed=45000000 ++ 2. MCP3204 ADC on spi1.2, maximum SPI clock frequency 500kHz: ++ dtoverlay=anyspi:spi1-2,dev="microchip,mcp3204" ++Load: dtoverlay=anyspi,= ++Params: spi- Configure device at spi, cs ++ (boolean, required) ++ dev Set device name to search compatible module ++ (string, required) ++ speed Set SPI clock frequency in Hz ++ (integer, optional, default 500000) ++ ++ + Name: apds9960 + Info: Configures the AVAGO APDS9960 digital proximity, ambient light, RGB and + gesture sensor +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/anyspi-overlay.dts +@@ -0,0 +1,205 @@ ++/* ++ * Universal device tree overlay for SPI devices ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&spidev0>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev1>; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "spi1/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target-path = "spi1/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@4 { ++ target-path = "spi1/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@5 { ++ target-path = "spi2/spidev@0"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@6 { ++ target-path = "spi2/spidev@1"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@7 { ++ target-path = "spi2/spidev@2"; ++ __dormant__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@8 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ anyspi_00: anyspi@0 { ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ }; ++ }; ++ ++ fragment@9 { ++ target = <&spi0>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ anyspi_01: anyspi@1 { ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ }; ++ }; ++ }; ++ ++ fragment@10 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ anyspi_10: anyspi@0 { ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ }; ++ }; ++ ++ fragment@11 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ anyspi_11: anyspi@1 { ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ }; ++ }; ++ }; ++ ++ fragment@12 { ++ target = <&spi1>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ anyspi_12: anyspi@2 { ++ reg = <2>; ++ spi-max-frequency = <500000>; ++ }; ++ }; ++ }; ++ ++ fragment@13 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ anyspi_20: anyspi@0 { ++ reg = <0>; ++ spi-max-frequency = <500000>; ++ }; ++ }; ++ }; ++ ++ fragment@14 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ anyspi_21: anyspi@1 { ++ reg = <1>; ++ spi-max-frequency = <500000>; ++ }; ++ }; ++ }; ++ ++ fragment@15 { ++ target = <&spi2>; ++ __dormant__ { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ anyspi_22: anyspi@2 { ++ reg = <2>; ++ spi-max-frequency = <500000>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ spi0-0 = <0>, "+0+8"; ++ spi0-1 = <0>, "+1+9"; ++ spi1-0 = <0>, "+2+10"; ++ spi1-1 = <0>, "+3+11"; ++ spi1-2 = <0>, "+4+12"; ++ spi2-0 = <0>, "+5+13"; ++ spi2-1 = <0>, "+6+14"; ++ spi2-2 = <0>, "+7+15"; ++ dev = <&anyspi_00>,"compatible", ++ <&anyspi_01>,"compatible", ++ <&anyspi_10>,"compatible", ++ <&anyspi_11>,"compatible", ++ <&anyspi_12>,"compatible", ++ <&anyspi_20>,"compatible", ++ <&anyspi_21>,"compatible", ++ <&anyspi_22>,"compatible"; ++ speed = <&anyspi_00>, "spi-max-frequency:0", ++ <&anyspi_01>, "spi-max-frequency:0", ++ <&anyspi_10>, "spi-max-frequency:0", ++ <&anyspi_11>, "spi-max-frequency:0", ++ <&anyspi_12>, "spi-max-frequency:0", ++ <&anyspi_20>, "spi-max-frequency:0", ++ <&anyspi_21>, "spi-max-frequency:0", ++ <&anyspi_22>, "spi-max-frequency:0"; ++ }; ++}; diff --git a/target/linux/bcm27xx/patches-4.19/950-0790-dwc_otg-fiq_fsm-add-a-barrier-on-entry-into-FIQ-hand.patch b/target/linux/bcm27xx/patches-4.19/950-0790-dwc_otg-fiq_fsm-add-a-barrier-on-entry-into-FIQ-hand.patch deleted file mode 100644 index dc48605cb1..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0790-dwc_otg-fiq_fsm-add-a-barrier-on-entry-into-FIQ-hand.patch +++ /dev/null @@ -1,49 +0,0 @@ -From b2d43d61a1d6d070664f10d12b3c8b6df11eb21d Mon Sep 17 00:00:00 2001 -From: Jonathan Bell -Date: Mon, 13 Jan 2020 15:54:55 +0000 -Subject: [PATCH] dwc_otg: fiq_fsm: add a barrier on entry into FIQ - handler(s) - -On BCM2835, there is no hardware guarantee that multiple outstanding -reads to different peripherals will complete in-order. The FIQ code -uses peripheral reads without barriers for performance, so in the case -where a read to a slow peripheral was issued immediately prior to FIQ -entry, the first peripheral read that the FIQ did could end up with -wrong read data returned. - -Add dsb(sy) on entry so that all outstanding reads are retired. - -The FIQ only issues reads to the dwc_otg core, so per-read barriers -in the handler itself are not required. - -On BCM2836 and BCM2837 the barrier is not strictly required due to -differences in how the peripheral bus is implemented, but having -arch-specific handlers that introduce different latencies is risky. - -Signed-off-by: Jonathan Bell ---- - drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -+++ b/drivers/usb/host/dwc_otg/dwc_otg_fiq_fsm.c -@@ -1259,6 +1259,9 @@ void notrace dwc_otg_fiq_fsm(struct fiq_ - haintmsk_data_t haintmsk; - int kick_irq = 0; - -+ /* Ensure peripheral reads issued prior to FIQ entry are complete */ -+ dsb(sy); -+ - gintsts_handled.d32 = 0; - haint_handled.d32 = 0; - -@@ -1379,6 +1382,9 @@ void notrace dwc_otg_fiq_nop(struct fiq_ - gintmsk_data_t gintmsk; - hfnum_data_t hfnum; - -+ /* Ensure peripheral reads issued prior to FIQ entry are complete */ -+ dsb(sy); -+ - fiq_fsm_spin_lock(&state->lock); - hfnum.d32 = FIQ_READ(state->dwc_regs_base + HFNUM); - gintsts.d32 = FIQ_READ(state->dwc_regs_base + GINTSTS); diff --git a/target/linux/bcm27xx/patches-4.19/950-0791-Add-universal-device-tree-overlay-for-SPI-devices.patch b/target/linux/bcm27xx/patches-4.19/950-0791-Add-universal-device-tree-overlay-for-SPI-devices.patch deleted file mode 100644 index ce027e72f0..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0791-Add-universal-device-tree-overlay-for-SPI-devices.patch +++ /dev/null @@ -1,273 +0,0 @@ -From 4d19be9132ca10cf582450a86dcb2c41f227f589 Mon Sep 17 00:00:00 2001 -From: Ed Spiridonov -Date: Tue, 10 Dec 2019 22:45:04 +0300 -Subject: [PATCH] Add universal device tree overlay for SPI devices - -Just specify the SPI address and device name ("compatible" property). -This overlay lacks any device-specific parameter support! -(some of them could be added later) - -Examples: -1. SPI NOR flash on spi0.1, maximum SPI clock frequency 45MHz: - dtoverlay=anyspi:spi0-1,dev="jedec,spi-nor",speed=45000000 -2. MCP3204 ADC on spi1.2, maximum SPI clock frequency 500kHz: - dtoverlay=anyspi:spi1-2,dev="microchip,mcp3204" - -Signed-off-by: Ed Spiridonov ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 23 ++ - arch/arm/boot/dts/overlays/anyspi-overlay.dts | 205 ++++++++++++++++++ - 3 files changed, 229 insertions(+) - create mode 100755 arch/arm/boot/dts/overlays/anyspi-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -15,6 +15,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - allo-katana-dac-audio.dtbo \ - allo-piano-dac-pcm512x-audio.dtbo \ - allo-piano-dac-plus-pcm512x-audio.dtbo \ -+ anyspi.dtbo \ - apds9960.dtbo \ - applepi-dac.dtbo \ - at86rf233.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -441,6 +441,29 @@ Params: 24db_digital_gain Allow ga - better voice quality. (default Off) - - -+Name: anyspi -+Info: Universal device tree overlay for SPI devices -+ -+ Just specify the SPI address and device name ("compatible" property). -+ This overlay lacks any device-specific parameter support! -+ -+ For devices on spi1 or spi2, the interfaces should be enabled -+ with one of the spi1-1/2/3cs and/or spi2-1/2/3cs overlays. -+ -+ Examples: -+ 1. SPI NOR flash on spi0.1, maximum SPI clock frequency 45MHz: -+ dtoverlay=anyspi:spi0-1,dev="jedec,spi-nor",speed=45000000 -+ 2. MCP3204 ADC on spi1.2, maximum SPI clock frequency 500kHz: -+ dtoverlay=anyspi:spi1-2,dev="microchip,mcp3204" -+Load: dtoverlay=anyspi,= -+Params: spi- Configure device at spi, cs -+ (boolean, required) -+ dev Set device name to search compatible module -+ (string, required) -+ speed Set SPI clock frequency in Hz -+ (integer, optional, default 500000) -+ -+ - Name: apds9960 - Info: Configures the AVAGO APDS9960 digital proximity, ambient light, RGB and - gesture sensor ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/anyspi-overlay.dts -@@ -0,0 +1,205 @@ -+/* -+ * Universal device tree overlay for SPI devices -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spidev0>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev1>; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target-path = "spi1/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target-path = "spi1/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@4 { -+ target-path = "spi1/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@5 { -+ target-path = "spi2/spidev@0"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@6 { -+ target-path = "spi2/spidev@1"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@7 { -+ target-path = "spi2/spidev@2"; -+ __dormant__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@8 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ anyspi_00: anyspi@0 { -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ fragment@9 { -+ target = <&spi0>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ anyspi_01: anyspi@1 { -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ fragment@10 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ anyspi_10: anyspi@0 { -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ fragment@11 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ anyspi_11: anyspi@1 { -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ fragment@12 { -+ target = <&spi1>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ anyspi_12: anyspi@2 { -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ fragment@13 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ anyspi_20: anyspi@0 { -+ reg = <0>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ fragment@14 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ anyspi_21: anyspi@1 { -+ reg = <1>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ fragment@15 { -+ target = <&spi2>; -+ __dormant__ { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ anyspi_22: anyspi@2 { -+ reg = <2>; -+ spi-max-frequency = <500000>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ spi0-0 = <0>, "+0+8"; -+ spi0-1 = <0>, "+1+9"; -+ spi1-0 = <0>, "+2+10"; -+ spi1-1 = <0>, "+3+11"; -+ spi1-2 = <0>, "+4+12"; -+ spi2-0 = <0>, "+5+13"; -+ spi2-1 = <0>, "+6+14"; -+ spi2-2 = <0>, "+7+15"; -+ dev = <&anyspi_00>,"compatible", -+ <&anyspi_01>,"compatible", -+ <&anyspi_10>,"compatible", -+ <&anyspi_11>,"compatible", -+ <&anyspi_12>,"compatible", -+ <&anyspi_20>,"compatible", -+ <&anyspi_21>,"compatible", -+ <&anyspi_22>,"compatible"; -+ speed = <&anyspi_00>, "spi-max-frequency:0", -+ <&anyspi_01>, "spi-max-frequency:0", -+ <&anyspi_10>, "spi-max-frequency:0", -+ <&anyspi_11>, "spi-max-frequency:0", -+ <&anyspi_12>, "spi-max-frequency:0", -+ <&anyspi_20>, "spi-max-frequency:0", -+ <&anyspi_21>, "spi-max-frequency:0", -+ <&anyspi_22>, "spi-max-frequency:0"; -+ }; -+}; diff --git a/target/linux/bcm27xx/patches-4.19/950-0791-sound-Add-the-HiFiBerry-DAC-HD-version.patch b/target/linux/bcm27xx/patches-4.19/950-0791-sound-Add-the-HiFiBerry-DAC-HD-version.patch new file mode 100644 index 0000000000..c8b8fd520b --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0791-sound-Add-the-HiFiBerry-DAC-HD-version.patch @@ -0,0 +1,776 @@ +From bb4781b1dac98688a3cf64cf728a64d811ca6add Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?J=C3=B6rg=20Schambacher?= + +Date: Tue, 21 Jan 2020 15:58:39 +0100 +Subject: [PATCH] sound: Add the HiFiBerry DAC+HD version + +This adds the driver for the DAC+HD version supporting HiFiBerry's +PCM179x based DACs. It also adds PLL control for clock generation. + +Signed-off-by: Joerg Schambacher +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 6 + + .../overlays/hifiberry-dacplushd-overlay.dts | 106 ++++++ + drivers/clk/Makefile | 1 + + drivers/clk/clk-hifiberry-dachd.c | 333 ++++++++++++++++++ + sound/soc/bcm/Kconfig | 7 + + sound/soc/bcm/Makefile | 2 + + sound/soc/bcm/hifiberry_dacplushd.c | 235 ++++++++++++ + 13 files changed, 696 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplushd-overlay.dts + create mode 100644 drivers/clk/clk-hifiberry-dachd.c + create mode 100644 sound/soc/bcm/hifiberry_dacplushd.c + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -57,6 +57,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + hifiberry-dacplusadc.dtbo \ + hifiberry-dacplusadcpro.dtbo \ + hifiberry-dacplusdsp.dtbo \ ++ hifiberry-dacplushd.dtbo \ + hifiberry-digi.dtbo \ + hifiberry-digi-pro.dtbo \ + hy28a.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -956,6 +956,12 @@ Load: dtoverlay=hifiberry-dacplusdsp + Params: + + ++Name: hifiberry-dacplushd ++Info: Configures the HifiBerry DAC+ HD audio card ++Load: dtoverlay=hifiberry-dacplushd ++Params: ++ ++ + Name: hifiberry-digi + Info: Configures the HifiBerry Digi and Digi+ audio card + Load: dtoverlay=hifiberry-digi +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplushd-overlay.dts +@@ -0,0 +1,106 @@ ++// Definitions for HiFiBerry DAC+ HD ++/dts-v1/; ++/plugin/; ++ ++#include ++ ++/ { ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target-path = "/clocks"; ++ __overlay__ { ++ dachd_osc: pll_dachd_osc { ++ compatible = "hifiberry,dachd-clk"; ++ #clock-cells = <0>; ++ }; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&i2s>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&i2c1>; ++ __overlay__ { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "okay"; ++ ++ pcm1792a@4c { ++ compatible = "ti,pcm1792a"; ++ #sound-dai-cells = <0>; ++ #clock-cells = <0>; ++ clocks = <&dachd_osc>; ++ reg = <0x4c>; ++ status = "okay"; ++ }; ++ pll: pll@62 { ++ compatible = "hifiberry,dachd-clk"; ++ #clock-cells = <0>; ++ reg = <0x62>; ++ clocks = <&dachd_osc>; ++ status = "okay"; ++ common_pll_regs = [ ++ 02 53 03 00 07 20 0F 00 ++ 10 0D 11 1D 12 0D 13 8C ++ 14 8C 15 8C 16 8C 17 8C ++ 18 2A 1C 00 1D 0F 1F 00 ++ 2A 00 2C 00 2F 00 30 00 ++ 31 00 32 00 34 00 37 00 ++ 38 00 39 00 3A 00 3B 01 ++ 3E 00 3F 00 40 00 41 00 ++ 5A 00 5B 00 95 00 96 00 ++ 97 00 98 00 99 00 9A 00 ++ 9B 00 A2 00 A3 00 A4 00 ++ B7 92 ]; ++ 192k_pll_regs = [ ++ 1A 0C 1B 35 1E F0 20 09 ++ 21 50 2B 02 2D 10 2E 40 ++ 33 01 35 22 36 80 3C 22 ++ 3D 46 ]; ++ 96k_pll_regs = [ ++ 1A 0C 1B 35 1E F0 20 09 ++ 21 50 2B 02 2D 10 2E 40 ++ 33 01 35 47 36 00 3C 32 ++ 3D 46 ]; ++ 48k_pll_regs = [ ++ 1A 0C 1B 35 1E F0 20 09 ++ 21 50 2B 02 2D 10 2E 40 ++ 33 01 35 90 36 00 3C 42 ++ 3D 46 ]; ++ 176k4_pll_regs = [ ++ 1A 3D 1B 09 1E F3 20 13 ++ 21 75 2B 04 2D 11 2E E0 ++ 33 02 35 25 36 C0 3C 22 ++ 3D 7A ]; ++ 88k2_pll_regs = [ ++ 1A 3D 1B 09 1E F3 20 13 ++ 21 75 2B 04 2D 11 2E E0 ++ 33 01 35 4D 36 80 3C 32 ++ 3D 7A ]; ++ 44k1_pll_regs = [ ++ 1A 3D 1B 09 1E F3 20 13 ++ 21 75 2B 04 2D 11 2E E0 ++ 33 01 35 9D 36 00 3C 42 ++ 3D 7A ]; ++ }; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&sound>; ++ __overlay__ { ++ compatible = "hifiberry,hifiberry-dacplushd"; ++ i2s-controller = <&i2s>; ++ clocks = <&pll 0>; ++ reset-gpio = <&gpio 16 GPIO_ACTIVE_LOW>; ++ status = "okay"; ++ }; ++ }; ++ ++}; +--- a/drivers/clk/Makefile ++++ b/drivers/clk/Makefile +@@ -32,6 +32,7 @@ obj-$(CONFIG_COMMON_CLK_ASPEED) += clk- + obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o + obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += clk-hifiberry-dacpro.o ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSHD) += clk-hifiberry-dachd.o + obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o + obj-$(CONFIG_COMMON_CLK_MAX9485) += clk-max9485.o + obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o +--- /dev/null ++++ b/drivers/clk/clk-hifiberry-dachd.c +@@ -0,0 +1,333 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Clock Driver for HiFiBerry DAC+ HD ++ * ++ * Author: Joerg Schambacher, i2Audio GmbH for HiFiBerry ++ * Copyright 2020 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define NO_PLL_RESET 0 ++#define PLL_RESET 1 ++#define HIFIBERRY_PLL_MAX_REGISTER 256 ++#define DEFAULT_RATE 44100 ++ ++static struct reg_default hifiberry_pll_reg_defaults[] = { ++ {0x02, 0x53}, {0x03, 0x00}, {0x07, 0x20}, {0x0F, 0x00}, ++ {0x10, 0x0D}, {0x11, 0x1D}, {0x12, 0x0D}, {0x13, 0x8C}, ++ {0x14, 0x8C}, {0x15, 0x8C}, {0x16, 0x8C}, {0x17, 0x8C}, ++ {0x18, 0x2A}, {0x1C, 0x00}, {0x1D, 0x0F}, {0x1F, 0x00}, ++ {0x2A, 0x00}, {0x2C, 0x00}, {0x2F, 0x00}, {0x30, 0x00}, ++ {0x31, 0x00}, {0x32, 0x00}, {0x34, 0x00}, {0x37, 0x00}, ++ {0x38, 0x00}, {0x39, 0x00}, {0x3A, 0x00}, {0x3B, 0x01}, ++ {0x3E, 0x00}, {0x3F, 0x00}, {0x40, 0x00}, {0x41, 0x00}, ++ {0x5A, 0x00}, {0x5B, 0x00}, {0x95, 0x00}, {0x96, 0x00}, ++ {0x97, 0x00}, {0x98, 0x00}, {0x99, 0x00}, {0x9A, 0x00}, ++ {0x9B, 0x00}, {0xA2, 0x00}, {0xA3, 0x00}, {0xA4, 0x00}, ++ {0xB7, 0x92}, ++ {0x1A, 0x3D}, {0x1B, 0x09}, {0x1E, 0xF3}, {0x20, 0x13}, ++ {0x21, 0x75}, {0x2B, 0x04}, {0x2D, 0x11}, {0x2E, 0xE0}, ++ {0x3D, 0x7A}, ++ {0x35, 0x9D}, {0x36, 0x00}, {0x3C, 0x42}, ++ { 177, 0xAC}, ++}; ++static struct reg_default common_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; ++static int num_common_pll_regs; ++static struct reg_default dedicated_192k_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; ++static int num_dedicated_192k_pll_regs; ++static struct reg_default dedicated_96k_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; ++static int num_dedicated_96k_pll_regs; ++static struct reg_default dedicated_48k_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; ++static int num_dedicated_48k_pll_regs; ++static struct reg_default dedicated_176k4_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; ++static int num_dedicated_176k4_pll_regs; ++static struct reg_default dedicated_88k2_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; ++static int num_dedicated_88k2_pll_regs; ++static struct reg_default dedicated_44k1_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; ++static int num_dedicated_44k1_pll_regs; ++ ++/** ++ * struct clk_hifiberry_drvdata - Common struct to the HiFiBerry DAC HD Clk ++ * @hw: clk_hw for the common clk framework ++ */ ++struct clk_hifiberry_drvdata { ++ struct regmap *regmap; ++ struct clk *clk; ++ struct clk_hw hw; ++ unsigned long rate; ++}; ++ ++#define to_hifiberry_clk(_hw) \ ++ container_of(_hw, struct clk_hifiberry_drvdata, hw) ++ ++static int clk_hifiberry_dachd_write_pll_regs(struct regmap *regmap, ++ struct reg_default *regs, ++ int num, int do_pll_reset) ++{ ++ int i; ++ int ret = 0; ++ char pll_soft_reset[] = { 177, 0xAC, }; ++ ++ for (i = 0; i < num; i++) { ++ ret |= regmap_write(regmap, regs[i].reg, regs[i].def); ++ if (ret) ++ return ret; ++ } ++ if (do_pll_reset) { ++ ret |= regmap_write(regmap, pll_soft_reset[0], ++ pll_soft_reset[1]); ++ mdelay(10); ++ } ++ return ret; ++} ++ ++static unsigned long clk_hifiberry_dachd_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ return to_hifiberry_clk(hw)->rate; ++} ++ ++static long clk_hifiberry_dachd_round_rate(struct clk_hw *hw, ++ unsigned long rate, unsigned long *parent_rate) ++{ ++ return rate; ++} ++ ++static int clk_hifiberry_dachd_set_rate(struct clk_hw *hw, ++ unsigned long rate, unsigned long parent_rate) ++{ ++ int ret; ++ struct clk_hifiberry_drvdata *drvdata = to_hifiberry_clk(hw); ++ ++ switch (rate) { ++ case 44100: ++ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, ++ dedicated_44k1_pll_regs, num_dedicated_44k1_pll_regs, ++ PLL_RESET); ++ break; ++ case 88200: ++ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, ++ dedicated_88k2_pll_regs, num_dedicated_88k2_pll_regs, ++ PLL_RESET); ++ break; ++ case 176400: ++ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, ++ dedicated_176k4_pll_regs, num_dedicated_176k4_pll_regs, ++ PLL_RESET); ++ break; ++ case 48000: ++ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, ++ dedicated_48k_pll_regs, num_dedicated_48k_pll_regs, ++ PLL_RESET); ++ break; ++ case 96000: ++ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, ++ dedicated_96k_pll_regs, num_dedicated_96k_pll_regs, ++ PLL_RESET); ++ break; ++ case 192000: ++ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, ++ dedicated_192k_pll_regs, num_dedicated_192k_pll_regs, ++ PLL_RESET); ++ break; ++ default: ++ ret = -EINVAL; ++ break; ++ } ++ to_hifiberry_clk(hw)->rate = rate; ++ ++ return ret; ++} ++ ++const struct clk_ops clk_hifiberry_dachd_rate_ops = { ++ .recalc_rate = clk_hifiberry_dachd_recalc_rate, ++ .round_rate = clk_hifiberry_dachd_round_rate, ++ .set_rate = clk_hifiberry_dachd_set_rate, ++}; ++ ++static int clk_hifiberry_get_prop_values(struct device *dev, ++ char *prop_name, ++ struct reg_default *regs) ++{ ++ int ret; ++ int i; ++ u8 tmp[2 * HIFIBERRY_PLL_MAX_REGISTER]; ++ ++ ret = of_property_read_variable_u8_array(dev->of_node, prop_name, ++ tmp, 0, 2 * HIFIBERRY_PLL_MAX_REGISTER); ++ if (ret < 0) ++ return ret; ++ if (ret & 1) { ++ dev_err(dev, ++ "%s <%s> -> #%i odd number of bytes for reg/val pairs!", ++ __func__, ++ prop_name, ++ ret); ++ return -EINVAL; ++ } ++ ret /= 2; ++ for (i = 0; i < ret; i++) { ++ regs[i].reg = (u32)tmp[2 * i]; ++ regs[i].def = (u32)tmp[2 * i + 1]; ++ } ++ return ret; ++} ++ ++ ++static int clk_hifiberry_dachd_dt_parse(struct device *dev) ++{ ++ num_common_pll_regs = clk_hifiberry_get_prop_values(dev, ++ "common_pll_regs", common_pll_regs); ++ num_dedicated_44k1_pll_regs = clk_hifiberry_get_prop_values(dev, ++ "44k1_pll_regs", dedicated_44k1_pll_regs); ++ num_dedicated_88k2_pll_regs = clk_hifiberry_get_prop_values(dev, ++ "88k2_pll_regs", dedicated_88k2_pll_regs); ++ num_dedicated_176k4_pll_regs = clk_hifiberry_get_prop_values(dev, ++ "176k4_pll_regs", dedicated_176k4_pll_regs); ++ num_dedicated_48k_pll_regs = clk_hifiberry_get_prop_values(dev, ++ "48k_pll_regs", dedicated_48k_pll_regs); ++ num_dedicated_96k_pll_regs = clk_hifiberry_get_prop_values(dev, ++ "96k_pll_regs", dedicated_96k_pll_regs); ++ num_dedicated_192k_pll_regs = clk_hifiberry_get_prop_values(dev, ++ "192k_pll_regs", dedicated_192k_pll_regs); ++ return 0; ++} ++ ++ ++static int clk_hifiberry_dachd_remove(struct device *dev) ++{ ++ of_clk_del_provider(dev->of_node); ++ return 0; ++} ++ ++const struct regmap_config hifiberry_pll_regmap = { ++ .reg_bits = 8, ++ .val_bits = 8, ++ .max_register = HIFIBERRY_PLL_MAX_REGISTER, ++ .reg_defaults = hifiberry_pll_reg_defaults, ++ .num_reg_defaults = ARRAY_SIZE(hifiberry_pll_reg_defaults), ++ .cache_type = REGCACHE_RBTREE, ++}; ++EXPORT_SYMBOL_GPL(hifiberry_pll_regmap); ++ ++ ++static int clk_hifiberry_dachd_i2c_probe(struct i2c_client *i2c, ++ const struct i2c_device_id *id) ++{ ++ struct clk_hifiberry_drvdata *hdclk; ++ int ret = 0; ++ struct clk_init_data init; ++ struct device *dev = &i2c->dev; ++ struct device_node *dev_node = dev->of_node; ++ struct regmap_config config = hifiberry_pll_regmap; ++ ++ hdclk = devm_kzalloc(&i2c->dev, ++ sizeof(struct clk_hifiberry_drvdata), GFP_KERNEL); ++ if (!hdclk) ++ return -ENOMEM; ++ ++ i2c_set_clientdata(i2c, hdclk); ++ ++ hdclk->regmap = devm_regmap_init_i2c(i2c, &config); ++ ++ if (IS_ERR(hdclk->regmap)) ++ return PTR_ERR(hdclk->regmap); ++ ++ /* start PLL to allow detection of DAC */ ++ ret = clk_hifiberry_dachd_write_pll_regs(hdclk->regmap, ++ hifiberry_pll_reg_defaults, ++ ARRAY_SIZE(hifiberry_pll_reg_defaults), ++ PLL_RESET); ++ if (ret) ++ return ret; ++ ++ clk_hifiberry_dachd_dt_parse(dev); ++ ++ /* restart PLL with configs from DTB */ ++ ret = clk_hifiberry_dachd_write_pll_regs(hdclk->regmap, common_pll_regs, ++ num_common_pll_regs, PLL_RESET); ++ if (ret) ++ return ret; ++ ++ init.name = "clk-hifiberry-dachd"; ++ init.ops = &clk_hifiberry_dachd_rate_ops; ++ init.flags = CLK_IS_BASIC; ++ init.parent_names = NULL; ++ init.num_parents = 0; ++ ++ hdclk->hw.init = &init; ++ ++ hdclk->clk = devm_clk_register(dev, &hdclk->hw); ++ if (IS_ERR(hdclk->clk)) { ++ dev_err(dev, "unable to register %s\n", init.name); ++ return PTR_ERR(hdclk->clk); ++ } ++ ++ ret = of_clk_add_provider(dev_node, of_clk_src_simple_get, hdclk->clk); ++ if (ret != 0) { ++ dev_err(dev, "Cannot of_clk_add_provider"); ++ return ret; ++ } ++ ++ ret = clk_set_rate(hdclk->hw.clk, DEFAULT_RATE); ++ if (ret != 0) { ++ dev_err(dev, "Cannot set rate : %d\n", ret); ++ return -EINVAL; ++ } ++ ++ return ret; ++} ++ ++static int clk_hifiberry_dachd_i2c_remove(struct i2c_client *i2c) ++{ ++ clk_hifiberry_dachd_remove(&i2c->dev); ++ return 0; ++} ++ ++static const struct i2c_device_id clk_hifiberry_dachd_i2c_id[] = { ++ { "dachd-clk", }, ++ { } ++}; ++MODULE_DEVICE_TABLE(i2c, clk_hifiberry_dachd_i2c_id); ++ ++static const struct of_device_id clk_hifiberry_dachd_of_match[] = { ++ { .compatible = "hifiberry,dachd-clk", }, ++ { } ++}; ++MODULE_DEVICE_TABLE(of, clk_hifiberry_dachd_of_match); ++ ++static struct i2c_driver clk_hifiberry_dachd_i2c_driver = { ++ .probe = clk_hifiberry_dachd_i2c_probe, ++ .remove = clk_hifiberry_dachd_i2c_remove, ++ .id_table = clk_hifiberry_dachd_i2c_id, ++ .driver = { ++ .name = "dachd-clk", ++ .of_match_table = of_match_ptr(clk_hifiberry_dachd_of_match), ++ }, ++}; ++ ++module_i2c_driver(clk_hifiberry_dachd_i2c_driver); ++ ++ ++MODULE_DESCRIPTION("HiFiBerry DAC+ HD clock driver"); ++MODULE_AUTHOR("Joerg Schambacher "); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:clk-hifiberry-dachd"); +--- a/sound/soc/bcm/Kconfig ++++ b/sound/soc/bcm/Kconfig +@@ -40,6 +40,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DACPLUS + help + Say Y or M if you want to add support for HifiBerry DAC+. + ++config SND_BCM2708_SOC_HIFIBERRY_DACPLUSHD ++ tristate "Support for HifiBerry DAC+ HD" ++ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ++ select SND_SOC_PCM179X_I2C ++ help ++ Say Y or M if you want to add support for HifiBerry DAC+ HD. ++ + config SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC + tristate "Support for HifiBerry DAC+ADC" + depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S +--- a/sound/soc/bcm/Makefile ++++ b/sound/soc/bcm/Makefile +@@ -13,6 +13,7 @@ snd-soc-googlevoicehat-codec-objs := goo + + # BCM2708 Machine Support + snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o ++snd-soc-hifiberry-dacplushd-objs := hifiberry_dacplushd.o + snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o + snd-soc-hifiberry-dacplusadcpro-objs := hifiberry_dacplusadcpro.o + snd-soc-hifiberry-dacplusdsp-objs := hifiberry_dacplusdsp.o +@@ -40,6 +41,7 @@ snd-soc-rpi-wm8804-soundcard-objs := rpi + + obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-codec.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o ++obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSHD) += snd-soc-hifiberry-dacplushd.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO) += snd-soc-hifiberry-dacplusadcpro.o + obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP) += snd-soc-hifiberry-dacplusdsp.o +--- /dev/null ++++ b/sound/soc/bcm/hifiberry_dacplushd.c +@@ -0,0 +1,235 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * ASoC Driver for HiFiBerry DAC+ HD ++ * ++ * Author: Joerg Schambacher, i2Audio GmbH for HiFiBerry ++ * Copyright 2020 ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, but ++ * WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++ * General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "../codecs/pcm179x.h" ++ ++#define DEFAULT_RATE 44100 ++ ++struct brd_drv_data { ++ struct regmap *regmap; ++ struct clk *sclk; ++}; ++ ++static struct brd_drv_data drvdata; ++static struct gpio_desc *reset_gpio; ++static const unsigned int hb_dacplushd_rates[] = { ++ 192000, 96000, 48000, 176400, 88200, 44100, ++}; ++ ++static struct snd_pcm_hw_constraint_list hb_dacplushd_constraints = { ++ .list = hb_dacplushd_rates, ++ .count = ARRAY_SIZE(hb_dacplushd_rates), ++}; ++ ++static int snd_rpi_hb_dacplushd_startup(struct snd_pcm_substream *substream) ++{ ++ /* constraints for standard sample rates */ ++ snd_pcm_hw_constraint_list(substream->runtime, 0, ++ SNDRV_PCM_HW_PARAM_RATE, ++ &hb_dacplushd_constraints); ++ return 0; ++} ++ ++static void snd_rpi_hifiberry_dacplushd_set_sclk( ++ struct snd_soc_component *component, ++ int sample_rate) ++{ ++ if (!IS_ERR(drvdata.sclk)) ++ clk_set_rate(drvdata.sclk, sample_rate); ++} ++ ++static int snd_rpi_hifiberry_dacplushd_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_dai_link *dai = rtd->dai_link; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ ++ dai->name = "HiFiBerry DAC+ HD"; ++ dai->stream_name = "HiFiBerry DAC+ HD HiFi"; ++ dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM; ++ ++ /* allow only fixed 32 clock counts per channel */ ++ snd_soc_dai_set_bclk_ratio(cpu_dai, 32*2); ++ ++ return 0; ++} ++ ++static int snd_rpi_hifiberry_dacplushd_hw_params( ++ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) ++{ ++ int ret = 0; ++ struct snd_soc_pcm_runtime *rtd = substream->private_data; ++ ++ struct snd_soc_component *component = rtd->codec_dai->component; ++ ++ snd_rpi_hifiberry_dacplushd_set_sclk(component, params_rate(params)); ++ return ret; ++} ++ ++/* machine stream operations */ ++static struct snd_soc_ops snd_rpi_hifiberry_dacplushd_ops = { ++ .startup = snd_rpi_hb_dacplushd_startup, ++ .hw_params = snd_rpi_hifiberry_dacplushd_hw_params, ++}; ++ ++static struct snd_soc_dai_link snd_rpi_hifiberry_dacplushd_dai[] = { ++{ ++ .name = "HiFiBerry DAC+ HD", ++ .stream_name = "HiFiBerry DAC+ HD HiFi", ++ .cpu_dai_name = "bcm2708-i2s.0", ++ .codec_dai_name = "pcm179x-hifi", ++ .platform_name = "bcm2708-i2s.0", ++ .codec_name = "pcm179x.1-004c", ++ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | ++ SND_SOC_DAIFMT_CBS_CFS, ++ .ops = &snd_rpi_hifiberry_dacplushd_ops, ++ .init = snd_rpi_hifiberry_dacplushd_init, ++}, ++}; ++ ++/* audio machine driver */ ++static struct snd_soc_card snd_rpi_hifiberry_dacplushd = { ++ .name = "snd_rpi_hifiberry_dacplushd", ++ .driver_name = "HifiberryDacplusHD", ++ .owner = THIS_MODULE, ++ .dai_link = snd_rpi_hifiberry_dacplushd_dai, ++ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dacplushd_dai), ++}; ++ ++static int snd_rpi_hifiberry_dacplushd_probe(struct platform_device *pdev) ++{ ++ int ret = 0; ++ static int dac_reset_done; ++ struct device *dev = &pdev->dev; ++ struct device_node *dev_node = dev->of_node; ++ ++ snd_rpi_hifiberry_dacplushd.dev = &pdev->dev; ++ ++ /* get GPIO and release DAC from RESET */ ++ if (!dac_reset_done) { ++ reset_gpio = gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW); ++ if (IS_ERR(reset_gpio)) { ++ dev_err(&pdev->dev, "gpiod_get() failed\n"); ++ return -EINVAL; ++ } ++ dac_reset_done = 1; ++ } ++ if (!IS_ERR(reset_gpio)) ++ gpiod_set_value(reset_gpio, 0); ++ msleep(1); ++ if (!IS_ERR(reset_gpio)) ++ gpiod_set_value(reset_gpio, 1); ++ msleep(1); ++ if (!IS_ERR(reset_gpio)) ++ gpiod_set_value(reset_gpio, 0); ++ ++ if (pdev->dev.of_node) { ++ struct device_node *i2s_node; ++ struct snd_soc_dai_link *dai; ++ ++ dai = &snd_rpi_hifiberry_dacplushd_dai[0]; ++ i2s_node = of_parse_phandle(pdev->dev.of_node, ++ "i2s-controller", 0); ++ ++ if (i2s_node) { ++ dai->cpu_dai_name = NULL; ++ dai->cpu_of_node = i2s_node; ++ dai->platform_name = NULL; ++ dai->platform_of_node = i2s_node; ++ } else { ++ return -EPROBE_DEFER; ++ } ++ ++ } ++ ++ ret = devm_snd_soc_register_card(&pdev->dev, ++ &snd_rpi_hifiberry_dacplushd); ++ if (ret && ret != -EPROBE_DEFER) { ++ dev_err(&pdev->dev, ++ "snd_soc_register_card() failed: %d\n", ret); ++ return ret; ++ } ++ if (ret == -EPROBE_DEFER) ++ return ret; ++ ++ dev_set_drvdata(dev, &drvdata); ++ if (dev_node == NULL) { ++ dev_err(&pdev->dev, "Device tree node not found\n"); ++ return -ENODEV; ++ } ++ ++ drvdata.sclk = devm_clk_get(dev, NULL); ++ if (IS_ERR(drvdata.sclk)) { ++ drvdata.sclk = ERR_PTR(-ENOENT); ++ return -ENODEV; ++ } ++ ++ clk_set_rate(drvdata.sclk, DEFAULT_RATE); ++ ++ return ret; ++} ++ ++static int snd_rpi_hifiberry_dacplushd_remove(struct platform_device *pdev) ++{ ++ if (IS_ERR(reset_gpio)) ++ return -EINVAL; ++ ++ /* put DAC into RESET and release GPIO */ ++ gpiod_set_value(reset_gpio, 0); ++ gpiod_put(reset_gpio); ++ ++ return 0; ++} ++ ++static const struct of_device_id snd_rpi_hifiberry_dacplushd_of_match[] = { ++ { .compatible = "hifiberry,hifiberry-dacplushd", }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dacplushd_of_match); ++ ++static struct platform_driver snd_rpi_hifiberry_dacplushd_driver = { ++ .driver = { ++ .name = "snd-rpi-hifiberry-dacplushd", ++ .owner = THIS_MODULE, ++ .of_match_table = snd_rpi_hifiberry_dacplushd_of_match, ++ }, ++ .probe = snd_rpi_hifiberry_dacplushd_probe, ++ .remove = snd_rpi_hifiberry_dacplushd_remove, ++}; ++ ++module_platform_driver(snd_rpi_hifiberry_dacplushd_driver); ++ ++MODULE_AUTHOR("Joerg Schambacher "); ++MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+ HD"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/bcm27xx/patches-4.19/950-0792-Initialise-rpi-firmware-before-clk-bcm2835.patch b/target/linux/bcm27xx/patches-4.19/950-0792-Initialise-rpi-firmware-before-clk-bcm2835.patch new file mode 100644 index 0000000000..3a68193506 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0792-Initialise-rpi-firmware-before-clk-bcm2835.patch @@ -0,0 +1,47 @@ +From 43551a95378230b8d062e107e012573739af2bf1 Mon Sep 17 00:00:00 2001 +From: Luke Hinds <7058938+lukehinds@users.noreply.github.com> +Date: Wed, 22 Jan 2020 16:03:00 +0000 +Subject: [PATCH] Initialise rpi-firmware before clk-bcm2835 + +The IMA (Integrity Measurement Architecture) looks for a TPM (Trusted +Platform Module) having been registered when it initialises; otherwise +it assumes there is no TPM. It has been observed on BCM2835 that IMA +is initialised before TPM, and that initialising the BCM2835 clock +driver before the firmware driver has the effect of reversing this +order. + +Change the firmware driver to initialise at core_initcall, delaying the +BCM2835 clock driver to postcore_initcall. + +See: https://github.com/raspberrypi/linux/issues/3291 + https://github.com/raspberrypi/linux/pull/3297 + +Signed-off-by: Luke Hinds +Co-authored-by: Phil Elwell +--- + drivers/clk/bcm/clk-bcm2835.c | 2 +- + drivers/firmware/raspberrypi.c | 2 +- + 2 files changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/clk/bcm/clk-bcm2835.c ++++ b/drivers/clk/bcm/clk-bcm2835.c +@@ -2388,7 +2388,7 @@ static int __init __bcm2835_clk_driver_i + { + return platform_driver_register(&bcm2835_clk_driver); + } +-core_initcall(__bcm2835_clk_driver_init); ++postcore_initcall(__bcm2835_clk_driver_init); + + MODULE_AUTHOR("Eric Anholt "); + MODULE_DESCRIPTION("BCM2835 clock driver"); +--- a/drivers/firmware/raspberrypi.c ++++ b/drivers/firmware/raspberrypi.c +@@ -404,7 +404,7 @@ out2: + out1: + return ret; + } +-subsys_initcall(rpi_firmware_init); ++core_initcall(rpi_firmware_init); + + static void __init rpi_firmware_exit(void) + { diff --git a/target/linux/bcm27xx/patches-4.19/950-0792-sound-Add-the-HiFiBerry-DAC-HD-version.patch b/target/linux/bcm27xx/patches-4.19/950-0792-sound-Add-the-HiFiBerry-DAC-HD-version.patch deleted file mode 100644 index c8b8fd520b..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0792-sound-Add-the-HiFiBerry-DAC-HD-version.patch +++ /dev/null @@ -1,776 +0,0 @@ -From bb4781b1dac98688a3cf64cf728a64d811ca6add Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?J=C3=B6rg=20Schambacher?= - -Date: Tue, 21 Jan 2020 15:58:39 +0100 -Subject: [PATCH] sound: Add the HiFiBerry DAC+HD version - -This adds the driver for the DAC+HD version supporting HiFiBerry's -PCM179x based DACs. It also adds PLL control for clock generation. - -Signed-off-by: Joerg Schambacher ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 6 + - .../overlays/hifiberry-dacplushd-overlay.dts | 106 ++++++ - drivers/clk/Makefile | 1 + - drivers/clk/clk-hifiberry-dachd.c | 333 ++++++++++++++++++ - sound/soc/bcm/Kconfig | 7 + - sound/soc/bcm/Makefile | 2 + - sound/soc/bcm/hifiberry_dacplushd.c | 235 ++++++++++++ - 13 files changed, 696 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/hifiberry-dacplushd-overlay.dts - create mode 100644 drivers/clk/clk-hifiberry-dachd.c - create mode 100644 sound/soc/bcm/hifiberry_dacplushd.c - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -57,6 +57,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - hifiberry-dacplusadc.dtbo \ - hifiberry-dacplusadcpro.dtbo \ - hifiberry-dacplusdsp.dtbo \ -+ hifiberry-dacplushd.dtbo \ - hifiberry-digi.dtbo \ - hifiberry-digi-pro.dtbo \ - hy28a.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -956,6 +956,12 @@ Load: dtoverlay=hifiberry-dacplusdsp - Params: - - -+Name: hifiberry-dacplushd -+Info: Configures the HifiBerry DAC+ HD audio card -+Load: dtoverlay=hifiberry-dacplushd -+Params: -+ -+ - Name: hifiberry-digi - Info: Configures the HifiBerry Digi and Digi+ audio card - Load: dtoverlay=hifiberry-digi ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplushd-overlay.dts -@@ -0,0 +1,106 @@ -+// Definitions for HiFiBerry DAC+ HD -+/dts-v1/; -+/plugin/; -+ -+#include -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target-path = "/clocks"; -+ __overlay__ { -+ dachd_osc: pll_dachd_osc { -+ compatible = "hifiberry,dachd-clk"; -+ #clock-cells = <0>; -+ }; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&i2s>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&i2c1>; -+ __overlay__ { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "okay"; -+ -+ pcm1792a@4c { -+ compatible = "ti,pcm1792a"; -+ #sound-dai-cells = <0>; -+ #clock-cells = <0>; -+ clocks = <&dachd_osc>; -+ reg = <0x4c>; -+ status = "okay"; -+ }; -+ pll: pll@62 { -+ compatible = "hifiberry,dachd-clk"; -+ #clock-cells = <0>; -+ reg = <0x62>; -+ clocks = <&dachd_osc>; -+ status = "okay"; -+ common_pll_regs = [ -+ 02 53 03 00 07 20 0F 00 -+ 10 0D 11 1D 12 0D 13 8C -+ 14 8C 15 8C 16 8C 17 8C -+ 18 2A 1C 00 1D 0F 1F 00 -+ 2A 00 2C 00 2F 00 30 00 -+ 31 00 32 00 34 00 37 00 -+ 38 00 39 00 3A 00 3B 01 -+ 3E 00 3F 00 40 00 41 00 -+ 5A 00 5B 00 95 00 96 00 -+ 97 00 98 00 99 00 9A 00 -+ 9B 00 A2 00 A3 00 A4 00 -+ B7 92 ]; -+ 192k_pll_regs = [ -+ 1A 0C 1B 35 1E F0 20 09 -+ 21 50 2B 02 2D 10 2E 40 -+ 33 01 35 22 36 80 3C 22 -+ 3D 46 ]; -+ 96k_pll_regs = [ -+ 1A 0C 1B 35 1E F0 20 09 -+ 21 50 2B 02 2D 10 2E 40 -+ 33 01 35 47 36 00 3C 32 -+ 3D 46 ]; -+ 48k_pll_regs = [ -+ 1A 0C 1B 35 1E F0 20 09 -+ 21 50 2B 02 2D 10 2E 40 -+ 33 01 35 90 36 00 3C 42 -+ 3D 46 ]; -+ 176k4_pll_regs = [ -+ 1A 3D 1B 09 1E F3 20 13 -+ 21 75 2B 04 2D 11 2E E0 -+ 33 02 35 25 36 C0 3C 22 -+ 3D 7A ]; -+ 88k2_pll_regs = [ -+ 1A 3D 1B 09 1E F3 20 13 -+ 21 75 2B 04 2D 11 2E E0 -+ 33 01 35 4D 36 80 3C 32 -+ 3D 7A ]; -+ 44k1_pll_regs = [ -+ 1A 3D 1B 09 1E F3 20 13 -+ 21 75 2B 04 2D 11 2E E0 -+ 33 01 35 9D 36 00 3C 42 -+ 3D 7A ]; -+ }; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&sound>; -+ __overlay__ { -+ compatible = "hifiberry,hifiberry-dacplushd"; -+ i2s-controller = <&i2s>; -+ clocks = <&pll 0>; -+ reset-gpio = <&gpio 16 GPIO_ACTIVE_LOW>; -+ status = "okay"; -+ }; -+ }; -+ -+}; ---- a/drivers/clk/Makefile -+++ b/drivers/clk/Makefile -@@ -32,6 +32,7 @@ obj-$(CONFIG_COMMON_CLK_ASPEED) += clk- - obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o - obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += clk-hifiberry-dacpro.o -+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSHD) += clk-hifiberry-dachd.o - obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o - obj-$(CONFIG_COMMON_CLK_MAX9485) += clk-max9485.o - obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o ---- /dev/null -+++ b/drivers/clk/clk-hifiberry-dachd.c -@@ -0,0 +1,333 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * Clock Driver for HiFiBerry DAC+ HD -+ * -+ * Author: Joerg Schambacher, i2Audio GmbH for HiFiBerry -+ * Copyright 2020 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define NO_PLL_RESET 0 -+#define PLL_RESET 1 -+#define HIFIBERRY_PLL_MAX_REGISTER 256 -+#define DEFAULT_RATE 44100 -+ -+static struct reg_default hifiberry_pll_reg_defaults[] = { -+ {0x02, 0x53}, {0x03, 0x00}, {0x07, 0x20}, {0x0F, 0x00}, -+ {0x10, 0x0D}, {0x11, 0x1D}, {0x12, 0x0D}, {0x13, 0x8C}, -+ {0x14, 0x8C}, {0x15, 0x8C}, {0x16, 0x8C}, {0x17, 0x8C}, -+ {0x18, 0x2A}, {0x1C, 0x00}, {0x1D, 0x0F}, {0x1F, 0x00}, -+ {0x2A, 0x00}, {0x2C, 0x00}, {0x2F, 0x00}, {0x30, 0x00}, -+ {0x31, 0x00}, {0x32, 0x00}, {0x34, 0x00}, {0x37, 0x00}, -+ {0x38, 0x00}, {0x39, 0x00}, {0x3A, 0x00}, {0x3B, 0x01}, -+ {0x3E, 0x00}, {0x3F, 0x00}, {0x40, 0x00}, {0x41, 0x00}, -+ {0x5A, 0x00}, {0x5B, 0x00}, {0x95, 0x00}, {0x96, 0x00}, -+ {0x97, 0x00}, {0x98, 0x00}, {0x99, 0x00}, {0x9A, 0x00}, -+ {0x9B, 0x00}, {0xA2, 0x00}, {0xA3, 0x00}, {0xA4, 0x00}, -+ {0xB7, 0x92}, -+ {0x1A, 0x3D}, {0x1B, 0x09}, {0x1E, 0xF3}, {0x20, 0x13}, -+ {0x21, 0x75}, {0x2B, 0x04}, {0x2D, 0x11}, {0x2E, 0xE0}, -+ {0x3D, 0x7A}, -+ {0x35, 0x9D}, {0x36, 0x00}, {0x3C, 0x42}, -+ { 177, 0xAC}, -+}; -+static struct reg_default common_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; -+static int num_common_pll_regs; -+static struct reg_default dedicated_192k_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; -+static int num_dedicated_192k_pll_regs; -+static struct reg_default dedicated_96k_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; -+static int num_dedicated_96k_pll_regs; -+static struct reg_default dedicated_48k_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; -+static int num_dedicated_48k_pll_regs; -+static struct reg_default dedicated_176k4_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; -+static int num_dedicated_176k4_pll_regs; -+static struct reg_default dedicated_88k2_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; -+static int num_dedicated_88k2_pll_regs; -+static struct reg_default dedicated_44k1_pll_regs[HIFIBERRY_PLL_MAX_REGISTER]; -+static int num_dedicated_44k1_pll_regs; -+ -+/** -+ * struct clk_hifiberry_drvdata - Common struct to the HiFiBerry DAC HD Clk -+ * @hw: clk_hw for the common clk framework -+ */ -+struct clk_hifiberry_drvdata { -+ struct regmap *regmap; -+ struct clk *clk; -+ struct clk_hw hw; -+ unsigned long rate; -+}; -+ -+#define to_hifiberry_clk(_hw) \ -+ container_of(_hw, struct clk_hifiberry_drvdata, hw) -+ -+static int clk_hifiberry_dachd_write_pll_regs(struct regmap *regmap, -+ struct reg_default *regs, -+ int num, int do_pll_reset) -+{ -+ int i; -+ int ret = 0; -+ char pll_soft_reset[] = { 177, 0xAC, }; -+ -+ for (i = 0; i < num; i++) { -+ ret |= regmap_write(regmap, regs[i].reg, regs[i].def); -+ if (ret) -+ return ret; -+ } -+ if (do_pll_reset) { -+ ret |= regmap_write(regmap, pll_soft_reset[0], -+ pll_soft_reset[1]); -+ mdelay(10); -+ } -+ return ret; -+} -+ -+static unsigned long clk_hifiberry_dachd_recalc_rate(struct clk_hw *hw, -+ unsigned long parent_rate) -+{ -+ return to_hifiberry_clk(hw)->rate; -+} -+ -+static long clk_hifiberry_dachd_round_rate(struct clk_hw *hw, -+ unsigned long rate, unsigned long *parent_rate) -+{ -+ return rate; -+} -+ -+static int clk_hifiberry_dachd_set_rate(struct clk_hw *hw, -+ unsigned long rate, unsigned long parent_rate) -+{ -+ int ret; -+ struct clk_hifiberry_drvdata *drvdata = to_hifiberry_clk(hw); -+ -+ switch (rate) { -+ case 44100: -+ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, -+ dedicated_44k1_pll_regs, num_dedicated_44k1_pll_regs, -+ PLL_RESET); -+ break; -+ case 88200: -+ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, -+ dedicated_88k2_pll_regs, num_dedicated_88k2_pll_regs, -+ PLL_RESET); -+ break; -+ case 176400: -+ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, -+ dedicated_176k4_pll_regs, num_dedicated_176k4_pll_regs, -+ PLL_RESET); -+ break; -+ case 48000: -+ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, -+ dedicated_48k_pll_regs, num_dedicated_48k_pll_regs, -+ PLL_RESET); -+ break; -+ case 96000: -+ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, -+ dedicated_96k_pll_regs, num_dedicated_96k_pll_regs, -+ PLL_RESET); -+ break; -+ case 192000: -+ ret = clk_hifiberry_dachd_write_pll_regs(drvdata->regmap, -+ dedicated_192k_pll_regs, num_dedicated_192k_pll_regs, -+ PLL_RESET); -+ break; -+ default: -+ ret = -EINVAL; -+ break; -+ } -+ to_hifiberry_clk(hw)->rate = rate; -+ -+ return ret; -+} -+ -+const struct clk_ops clk_hifiberry_dachd_rate_ops = { -+ .recalc_rate = clk_hifiberry_dachd_recalc_rate, -+ .round_rate = clk_hifiberry_dachd_round_rate, -+ .set_rate = clk_hifiberry_dachd_set_rate, -+}; -+ -+static int clk_hifiberry_get_prop_values(struct device *dev, -+ char *prop_name, -+ struct reg_default *regs) -+{ -+ int ret; -+ int i; -+ u8 tmp[2 * HIFIBERRY_PLL_MAX_REGISTER]; -+ -+ ret = of_property_read_variable_u8_array(dev->of_node, prop_name, -+ tmp, 0, 2 * HIFIBERRY_PLL_MAX_REGISTER); -+ if (ret < 0) -+ return ret; -+ if (ret & 1) { -+ dev_err(dev, -+ "%s <%s> -> #%i odd number of bytes for reg/val pairs!", -+ __func__, -+ prop_name, -+ ret); -+ return -EINVAL; -+ } -+ ret /= 2; -+ for (i = 0; i < ret; i++) { -+ regs[i].reg = (u32)tmp[2 * i]; -+ regs[i].def = (u32)tmp[2 * i + 1]; -+ } -+ return ret; -+} -+ -+ -+static int clk_hifiberry_dachd_dt_parse(struct device *dev) -+{ -+ num_common_pll_regs = clk_hifiberry_get_prop_values(dev, -+ "common_pll_regs", common_pll_regs); -+ num_dedicated_44k1_pll_regs = clk_hifiberry_get_prop_values(dev, -+ "44k1_pll_regs", dedicated_44k1_pll_regs); -+ num_dedicated_88k2_pll_regs = clk_hifiberry_get_prop_values(dev, -+ "88k2_pll_regs", dedicated_88k2_pll_regs); -+ num_dedicated_176k4_pll_regs = clk_hifiberry_get_prop_values(dev, -+ "176k4_pll_regs", dedicated_176k4_pll_regs); -+ num_dedicated_48k_pll_regs = clk_hifiberry_get_prop_values(dev, -+ "48k_pll_regs", dedicated_48k_pll_regs); -+ num_dedicated_96k_pll_regs = clk_hifiberry_get_prop_values(dev, -+ "96k_pll_regs", dedicated_96k_pll_regs); -+ num_dedicated_192k_pll_regs = clk_hifiberry_get_prop_values(dev, -+ "192k_pll_regs", dedicated_192k_pll_regs); -+ return 0; -+} -+ -+ -+static int clk_hifiberry_dachd_remove(struct device *dev) -+{ -+ of_clk_del_provider(dev->of_node); -+ return 0; -+} -+ -+const struct regmap_config hifiberry_pll_regmap = { -+ .reg_bits = 8, -+ .val_bits = 8, -+ .max_register = HIFIBERRY_PLL_MAX_REGISTER, -+ .reg_defaults = hifiberry_pll_reg_defaults, -+ .num_reg_defaults = ARRAY_SIZE(hifiberry_pll_reg_defaults), -+ .cache_type = REGCACHE_RBTREE, -+}; -+EXPORT_SYMBOL_GPL(hifiberry_pll_regmap); -+ -+ -+static int clk_hifiberry_dachd_i2c_probe(struct i2c_client *i2c, -+ const struct i2c_device_id *id) -+{ -+ struct clk_hifiberry_drvdata *hdclk; -+ int ret = 0; -+ struct clk_init_data init; -+ struct device *dev = &i2c->dev; -+ struct device_node *dev_node = dev->of_node; -+ struct regmap_config config = hifiberry_pll_regmap; -+ -+ hdclk = devm_kzalloc(&i2c->dev, -+ sizeof(struct clk_hifiberry_drvdata), GFP_KERNEL); -+ if (!hdclk) -+ return -ENOMEM; -+ -+ i2c_set_clientdata(i2c, hdclk); -+ -+ hdclk->regmap = devm_regmap_init_i2c(i2c, &config); -+ -+ if (IS_ERR(hdclk->regmap)) -+ return PTR_ERR(hdclk->regmap); -+ -+ /* start PLL to allow detection of DAC */ -+ ret = clk_hifiberry_dachd_write_pll_regs(hdclk->regmap, -+ hifiberry_pll_reg_defaults, -+ ARRAY_SIZE(hifiberry_pll_reg_defaults), -+ PLL_RESET); -+ if (ret) -+ return ret; -+ -+ clk_hifiberry_dachd_dt_parse(dev); -+ -+ /* restart PLL with configs from DTB */ -+ ret = clk_hifiberry_dachd_write_pll_regs(hdclk->regmap, common_pll_regs, -+ num_common_pll_regs, PLL_RESET); -+ if (ret) -+ return ret; -+ -+ init.name = "clk-hifiberry-dachd"; -+ init.ops = &clk_hifiberry_dachd_rate_ops; -+ init.flags = CLK_IS_BASIC; -+ init.parent_names = NULL; -+ init.num_parents = 0; -+ -+ hdclk->hw.init = &init; -+ -+ hdclk->clk = devm_clk_register(dev, &hdclk->hw); -+ if (IS_ERR(hdclk->clk)) { -+ dev_err(dev, "unable to register %s\n", init.name); -+ return PTR_ERR(hdclk->clk); -+ } -+ -+ ret = of_clk_add_provider(dev_node, of_clk_src_simple_get, hdclk->clk); -+ if (ret != 0) { -+ dev_err(dev, "Cannot of_clk_add_provider"); -+ return ret; -+ } -+ -+ ret = clk_set_rate(hdclk->hw.clk, DEFAULT_RATE); -+ if (ret != 0) { -+ dev_err(dev, "Cannot set rate : %d\n", ret); -+ return -EINVAL; -+ } -+ -+ return ret; -+} -+ -+static int clk_hifiberry_dachd_i2c_remove(struct i2c_client *i2c) -+{ -+ clk_hifiberry_dachd_remove(&i2c->dev); -+ return 0; -+} -+ -+static const struct i2c_device_id clk_hifiberry_dachd_i2c_id[] = { -+ { "dachd-clk", }, -+ { } -+}; -+MODULE_DEVICE_TABLE(i2c, clk_hifiberry_dachd_i2c_id); -+ -+static const struct of_device_id clk_hifiberry_dachd_of_match[] = { -+ { .compatible = "hifiberry,dachd-clk", }, -+ { } -+}; -+MODULE_DEVICE_TABLE(of, clk_hifiberry_dachd_of_match); -+ -+static struct i2c_driver clk_hifiberry_dachd_i2c_driver = { -+ .probe = clk_hifiberry_dachd_i2c_probe, -+ .remove = clk_hifiberry_dachd_i2c_remove, -+ .id_table = clk_hifiberry_dachd_i2c_id, -+ .driver = { -+ .name = "dachd-clk", -+ .of_match_table = of_match_ptr(clk_hifiberry_dachd_of_match), -+ }, -+}; -+ -+module_i2c_driver(clk_hifiberry_dachd_i2c_driver); -+ -+ -+MODULE_DESCRIPTION("HiFiBerry DAC+ HD clock driver"); -+MODULE_AUTHOR("Joerg Schambacher "); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:clk-hifiberry-dachd"); ---- a/sound/soc/bcm/Kconfig -+++ b/sound/soc/bcm/Kconfig -@@ -40,6 +40,13 @@ config SND_BCM2708_SOC_HIFIBERRY_DACPLUS - help - Say Y or M if you want to add support for HifiBerry DAC+. - -+config SND_BCM2708_SOC_HIFIBERRY_DACPLUSHD -+ tristate "Support for HifiBerry DAC+ HD" -+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S -+ select SND_SOC_PCM179X_I2C -+ help -+ Say Y or M if you want to add support for HifiBerry DAC+ HD. -+ - config SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC - tristate "Support for HifiBerry DAC+ADC" - depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S ---- a/sound/soc/bcm/Makefile -+++ b/sound/soc/bcm/Makefile -@@ -13,6 +13,7 @@ snd-soc-googlevoicehat-codec-objs := goo - - # BCM2708 Machine Support - snd-soc-hifiberry-dacplus-objs := hifiberry_dacplus.o -+snd-soc-hifiberry-dacplushd-objs := hifiberry_dacplushd.o - snd-soc-hifiberry-dacplusadc-objs := hifiberry_dacplusadc.o - snd-soc-hifiberry-dacplusadcpro-objs := hifiberry_dacplusadcpro.o - snd-soc-hifiberry-dacplusdsp-objs := hifiberry_dacplusdsp.o -@@ -40,6 +41,7 @@ snd-soc-rpi-wm8804-soundcard-objs := rpi - - obj-$(CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD) += snd-soc-googlevoicehat-codec.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUS) += snd-soc-hifiberry-dacplus.o -+obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSHD) += snd-soc-hifiberry-dacplushd.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC) += snd-soc-hifiberry-dacplusadc.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADCPRO) += snd-soc-hifiberry-dacplusadcpro.o - obj-$(CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSDSP) += snd-soc-hifiberry-dacplusdsp.o ---- /dev/null -+++ b/sound/soc/bcm/hifiberry_dacplushd.c -@@ -0,0 +1,235 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * ASoC Driver for HiFiBerry DAC+ HD -+ * -+ * Author: Joerg Schambacher, i2Audio GmbH for HiFiBerry -+ * Copyright 2020 -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, but -+ * WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -+ * General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "../codecs/pcm179x.h" -+ -+#define DEFAULT_RATE 44100 -+ -+struct brd_drv_data { -+ struct regmap *regmap; -+ struct clk *sclk; -+}; -+ -+static struct brd_drv_data drvdata; -+static struct gpio_desc *reset_gpio; -+static const unsigned int hb_dacplushd_rates[] = { -+ 192000, 96000, 48000, 176400, 88200, 44100, -+}; -+ -+static struct snd_pcm_hw_constraint_list hb_dacplushd_constraints = { -+ .list = hb_dacplushd_rates, -+ .count = ARRAY_SIZE(hb_dacplushd_rates), -+}; -+ -+static int snd_rpi_hb_dacplushd_startup(struct snd_pcm_substream *substream) -+{ -+ /* constraints for standard sample rates */ -+ snd_pcm_hw_constraint_list(substream->runtime, 0, -+ SNDRV_PCM_HW_PARAM_RATE, -+ &hb_dacplushd_constraints); -+ return 0; -+} -+ -+static void snd_rpi_hifiberry_dacplushd_set_sclk( -+ struct snd_soc_component *component, -+ int sample_rate) -+{ -+ if (!IS_ERR(drvdata.sclk)) -+ clk_set_rate(drvdata.sclk, sample_rate); -+} -+ -+static int snd_rpi_hifiberry_dacplushd_init(struct snd_soc_pcm_runtime *rtd) -+{ -+ struct snd_soc_dai_link *dai = rtd->dai_link; -+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; -+ -+ dai->name = "HiFiBerry DAC+ HD"; -+ dai->stream_name = "HiFiBerry DAC+ HD HiFi"; -+ dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBM_CFM; -+ -+ /* allow only fixed 32 clock counts per channel */ -+ snd_soc_dai_set_bclk_ratio(cpu_dai, 32*2); -+ -+ return 0; -+} -+ -+static int snd_rpi_hifiberry_dacplushd_hw_params( -+ struct snd_pcm_substream *substream, struct snd_pcm_hw_params *params) -+{ -+ int ret = 0; -+ struct snd_soc_pcm_runtime *rtd = substream->private_data; -+ -+ struct snd_soc_component *component = rtd->codec_dai->component; -+ -+ snd_rpi_hifiberry_dacplushd_set_sclk(component, params_rate(params)); -+ return ret; -+} -+ -+/* machine stream operations */ -+static struct snd_soc_ops snd_rpi_hifiberry_dacplushd_ops = { -+ .startup = snd_rpi_hb_dacplushd_startup, -+ .hw_params = snd_rpi_hifiberry_dacplushd_hw_params, -+}; -+ -+static struct snd_soc_dai_link snd_rpi_hifiberry_dacplushd_dai[] = { -+{ -+ .name = "HiFiBerry DAC+ HD", -+ .stream_name = "HiFiBerry DAC+ HD HiFi", -+ .cpu_dai_name = "bcm2708-i2s.0", -+ .codec_dai_name = "pcm179x-hifi", -+ .platform_name = "bcm2708-i2s.0", -+ .codec_name = "pcm179x.1-004c", -+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | -+ SND_SOC_DAIFMT_CBS_CFS, -+ .ops = &snd_rpi_hifiberry_dacplushd_ops, -+ .init = snd_rpi_hifiberry_dacplushd_init, -+}, -+}; -+ -+/* audio machine driver */ -+static struct snd_soc_card snd_rpi_hifiberry_dacplushd = { -+ .name = "snd_rpi_hifiberry_dacplushd", -+ .driver_name = "HifiberryDacplusHD", -+ .owner = THIS_MODULE, -+ .dai_link = snd_rpi_hifiberry_dacplushd_dai, -+ .num_links = ARRAY_SIZE(snd_rpi_hifiberry_dacplushd_dai), -+}; -+ -+static int snd_rpi_hifiberry_dacplushd_probe(struct platform_device *pdev) -+{ -+ int ret = 0; -+ static int dac_reset_done; -+ struct device *dev = &pdev->dev; -+ struct device_node *dev_node = dev->of_node; -+ -+ snd_rpi_hifiberry_dacplushd.dev = &pdev->dev; -+ -+ /* get GPIO and release DAC from RESET */ -+ if (!dac_reset_done) { -+ reset_gpio = gpiod_get(&pdev->dev, "reset", GPIOD_OUT_LOW); -+ if (IS_ERR(reset_gpio)) { -+ dev_err(&pdev->dev, "gpiod_get() failed\n"); -+ return -EINVAL; -+ } -+ dac_reset_done = 1; -+ } -+ if (!IS_ERR(reset_gpio)) -+ gpiod_set_value(reset_gpio, 0); -+ msleep(1); -+ if (!IS_ERR(reset_gpio)) -+ gpiod_set_value(reset_gpio, 1); -+ msleep(1); -+ if (!IS_ERR(reset_gpio)) -+ gpiod_set_value(reset_gpio, 0); -+ -+ if (pdev->dev.of_node) { -+ struct device_node *i2s_node; -+ struct snd_soc_dai_link *dai; -+ -+ dai = &snd_rpi_hifiberry_dacplushd_dai[0]; -+ i2s_node = of_parse_phandle(pdev->dev.of_node, -+ "i2s-controller", 0); -+ -+ if (i2s_node) { -+ dai->cpu_dai_name = NULL; -+ dai->cpu_of_node = i2s_node; -+ dai->platform_name = NULL; -+ dai->platform_of_node = i2s_node; -+ } else { -+ return -EPROBE_DEFER; -+ } -+ -+ } -+ -+ ret = devm_snd_soc_register_card(&pdev->dev, -+ &snd_rpi_hifiberry_dacplushd); -+ if (ret && ret != -EPROBE_DEFER) { -+ dev_err(&pdev->dev, -+ "snd_soc_register_card() failed: %d\n", ret); -+ return ret; -+ } -+ if (ret == -EPROBE_DEFER) -+ return ret; -+ -+ dev_set_drvdata(dev, &drvdata); -+ if (dev_node == NULL) { -+ dev_err(&pdev->dev, "Device tree node not found\n"); -+ return -ENODEV; -+ } -+ -+ drvdata.sclk = devm_clk_get(dev, NULL); -+ if (IS_ERR(drvdata.sclk)) { -+ drvdata.sclk = ERR_PTR(-ENOENT); -+ return -ENODEV; -+ } -+ -+ clk_set_rate(drvdata.sclk, DEFAULT_RATE); -+ -+ return ret; -+} -+ -+static int snd_rpi_hifiberry_dacplushd_remove(struct platform_device *pdev) -+{ -+ if (IS_ERR(reset_gpio)) -+ return -EINVAL; -+ -+ /* put DAC into RESET and release GPIO */ -+ gpiod_set_value(reset_gpio, 0); -+ gpiod_put(reset_gpio); -+ -+ return 0; -+} -+ -+static const struct of_device_id snd_rpi_hifiberry_dacplushd_of_match[] = { -+ { .compatible = "hifiberry,hifiberry-dacplushd", }, -+ {}, -+}; -+ -+MODULE_DEVICE_TABLE(of, snd_rpi_hifiberry_dacplushd_of_match); -+ -+static struct platform_driver snd_rpi_hifiberry_dacplushd_driver = { -+ .driver = { -+ .name = "snd-rpi-hifiberry-dacplushd", -+ .owner = THIS_MODULE, -+ .of_match_table = snd_rpi_hifiberry_dacplushd_of_match, -+ }, -+ .probe = snd_rpi_hifiberry_dacplushd_probe, -+ .remove = snd_rpi_hifiberry_dacplushd_remove, -+}; -+ -+module_platform_driver(snd_rpi_hifiberry_dacplushd_driver); -+ -+MODULE_AUTHOR("Joerg Schambacher "); -+MODULE_DESCRIPTION("ASoC Driver for HiFiBerry DAC+ HD"); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/bcm27xx/patches-4.19/950-0793-Fix-master-mode-settings-of-HiFiBerry-DAC-ADC-PRO-ca.patch b/target/linux/bcm27xx/patches-4.19/950-0793-Fix-master-mode-settings-of-HiFiBerry-DAC-ADC-PRO-ca.patch new file mode 100644 index 0000000000..020118d95a --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0793-Fix-master-mode-settings-of-HiFiBerry-DAC-ADC-PRO-ca.patch @@ -0,0 +1,26 @@ +From 898cec85907f8f171264c8be281a9ac2979b1655 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?J=C3=B6rg=20Schambacher?= + +Date: Thu, 23 Jan 2020 13:32:13 +0100 +Subject: [PATCH] Fix master mode settings of HiFiBerry DAC+ADC PRO + card (#3424) + +This patch fixes the board DAI setting when in master-mode. +Wrong setting could have caused random pop noise. + +Signed-off-by: Joerg Schambacher +--- + sound/soc/bcm/hifiberry_dacplusadcpro.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/sound/soc/bcm/hifiberry_dacplusadcpro.c ++++ b/sound/soc/bcm/hifiberry_dacplusadcpro.c +@@ -285,6 +285,8 @@ static int snd_rpi_hifiberry_dacplusadcp + + dai->name = "HiFiBerry DAC+ADC Pro"; + dai->stream_name = "HiFiBerry DAC+ADC Pro HiFi"; ++ dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF ++ | SND_SOC_DAIFMT_CBM_CFM; + + // set DAC DAI configuration + ret = snd_soc_dai_set_fmt(rtd->codec_dais[0], diff --git a/target/linux/bcm27xx/patches-4.19/950-0793-Initialise-rpi-firmware-before-clk-bcm2835.patch b/target/linux/bcm27xx/patches-4.19/950-0793-Initialise-rpi-firmware-before-clk-bcm2835.patch deleted file mode 100644 index 3a68193506..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0793-Initialise-rpi-firmware-before-clk-bcm2835.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 43551a95378230b8d062e107e012573739af2bf1 Mon Sep 17 00:00:00 2001 -From: Luke Hinds <7058938+lukehinds@users.noreply.github.com> -Date: Wed, 22 Jan 2020 16:03:00 +0000 -Subject: [PATCH] Initialise rpi-firmware before clk-bcm2835 - -The IMA (Integrity Measurement Architecture) looks for a TPM (Trusted -Platform Module) having been registered when it initialises; otherwise -it assumes there is no TPM. It has been observed on BCM2835 that IMA -is initialised before TPM, and that initialising the BCM2835 clock -driver before the firmware driver has the effect of reversing this -order. - -Change the firmware driver to initialise at core_initcall, delaying the -BCM2835 clock driver to postcore_initcall. - -See: https://github.com/raspberrypi/linux/issues/3291 - https://github.com/raspberrypi/linux/pull/3297 - -Signed-off-by: Luke Hinds -Co-authored-by: Phil Elwell ---- - drivers/clk/bcm/clk-bcm2835.c | 2 +- - drivers/firmware/raspberrypi.c | 2 +- - 2 files changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/clk/bcm/clk-bcm2835.c -+++ b/drivers/clk/bcm/clk-bcm2835.c -@@ -2388,7 +2388,7 @@ static int __init __bcm2835_clk_driver_i - { - return platform_driver_register(&bcm2835_clk_driver); - } --core_initcall(__bcm2835_clk_driver_init); -+postcore_initcall(__bcm2835_clk_driver_init); - - MODULE_AUTHOR("Eric Anholt "); - MODULE_DESCRIPTION("BCM2835 clock driver"); ---- a/drivers/firmware/raspberrypi.c -+++ b/drivers/firmware/raspberrypi.c -@@ -404,7 +404,7 @@ out2: - out1: - return ret; - } --subsys_initcall(rpi_firmware_init); -+core_initcall(rpi_firmware_init); - - static void __init rpi_firmware_exit(void) - { diff --git a/target/linux/bcm27xx/patches-4.19/950-0794-Fix-master-mode-settings-of-HiFiBerry-DAC-ADC-PRO-ca.patch b/target/linux/bcm27xx/patches-4.19/950-0794-Fix-master-mode-settings-of-HiFiBerry-DAC-ADC-PRO-ca.patch deleted file mode 100644 index 020118d95a..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0794-Fix-master-mode-settings-of-HiFiBerry-DAC-ADC-PRO-ca.patch +++ /dev/null @@ -1,26 +0,0 @@ -From 898cec85907f8f171264c8be281a9ac2979b1655 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?J=C3=B6rg=20Schambacher?= - -Date: Thu, 23 Jan 2020 13:32:13 +0100 -Subject: [PATCH] Fix master mode settings of HiFiBerry DAC+ADC PRO - card (#3424) - -This patch fixes the board DAI setting when in master-mode. -Wrong setting could have caused random pop noise. - -Signed-off-by: Joerg Schambacher ---- - sound/soc/bcm/hifiberry_dacplusadcpro.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/sound/soc/bcm/hifiberry_dacplusadcpro.c -+++ b/sound/soc/bcm/hifiberry_dacplusadcpro.c -@@ -285,6 +285,8 @@ static int snd_rpi_hifiberry_dacplusadcp - - dai->name = "HiFiBerry DAC+ADC Pro"; - dai->stream_name = "HiFiBerry DAC+ADC Pro HiFi"; -+ dai->dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF -+ | SND_SOC_DAIFMT_CBM_CFM; - - // set DAC DAI configuration - ret = snd_soc_dai_set_fmt(rtd->codec_dais[0], diff --git a/target/linux/bcm27xx/patches-4.19/950-0794-overlays-Use-preferred-compatible-strings.patch b/target/linux/bcm27xx/patches-4.19/950-0794-overlays-Use-preferred-compatible-strings.patch new file mode 100644 index 0000000000..7e5921d15d --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0794-overlays-Use-preferred-compatible-strings.patch @@ -0,0 +1,72 @@ +From 0a865ae13d5f98594562ebe5713caec65ab689e5 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 24 Jan 2020 09:02:37 +0000 +Subject: [PATCH] overlays: Use preferred compatible strings + +Make sure all overlays have correct compatible strings before enabling +the automated checking. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts | 2 +- + arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts | 2 ++ + arch/arm/boot/dts/overlays/pwm-overlay.dts | 2 ++ + arch/arm/boot/dts/overlays/smi-dev-overlay.dts | 2 ++ + 5 files changed, 8 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target-path = "/clocks"; +--- a/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts ++++ b/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts +@@ -3,7 +3,7 @@ + /plugin/; + + / { +- compatible = "brcm,bcm2708"; ++ compatible = "brcm,bcm2835"; + + fragment@0 { + target = <&i2s>; +--- a/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts +@@ -17,6 +17,8 @@ N.B.: + */ + + / { ++ compatible = "brcm,bcm2835"; ++ + fragment@0 { + target = <&gpio>; + __overlay__ { +--- a/arch/arm/boot/dts/overlays/pwm-overlay.dts ++++ b/arch/arm/boot/dts/overlays/pwm-overlay.dts +@@ -15,6 +15,8 @@ N.B.: + */ + + / { ++ compatible = "brcm,bcm2835"; ++ + fragment@0 { + target = <&gpio>; + __overlay__ { +--- a/arch/arm/boot/dts/overlays/smi-dev-overlay.dts ++++ b/arch/arm/boot/dts/overlays/smi-dev-overlay.dts +@@ -5,6 +5,8 @@ + /plugin/; + + /{ ++ compatible = "brcm,bcm2835"; ++ + fragment@0 { + target = <&soc>; + __overlay__ { diff --git a/target/linux/bcm27xx/patches-4.19/950-0795-overlays-Use-preferred-compatible-strings.patch b/target/linux/bcm27xx/patches-4.19/950-0795-overlays-Use-preferred-compatible-strings.patch deleted file mode 100644 index 7e5921d15d..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0795-overlays-Use-preferred-compatible-strings.patch +++ /dev/null @@ -1,72 +0,0 @@ -From 0a865ae13d5f98594562ebe5713caec65ab689e5 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 24 Jan 2020 09:02:37 +0000 -Subject: [PATCH] overlays: Use preferred compatible strings - -Make sure all overlays have correct compatible strings before enabling -the automated checking. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts | 2 +- - arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts | 2 ++ - arch/arm/boot/dts/overlays/pwm-overlay.dts | 2 ++ - arch/arm/boot/dts/overlays/smi-dev-overlay.dts | 2 ++ - 5 files changed, 8 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target-path = "/clocks"; ---- a/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts -+++ b/arch/arm/boot/dts/overlays/iqaudio-codec-overlay.dts -@@ -3,7 +3,7 @@ - /plugin/; - - / { -- compatible = "brcm,bcm2708"; -+ compatible = "brcm,bcm2835"; - - fragment@0 { - target = <&i2s>; ---- a/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pwm-2chan-overlay.dts -@@ -17,6 +17,8 @@ N.B.: - */ - - / { -+ compatible = "brcm,bcm2835"; -+ - fragment@0 { - target = <&gpio>; - __overlay__ { ---- a/arch/arm/boot/dts/overlays/pwm-overlay.dts -+++ b/arch/arm/boot/dts/overlays/pwm-overlay.dts -@@ -15,6 +15,8 @@ N.B.: - */ - - / { -+ compatible = "brcm,bcm2835"; -+ - fragment@0 { - target = <&gpio>; - __overlay__ { ---- a/arch/arm/boot/dts/overlays/smi-dev-overlay.dts -+++ b/arch/arm/boot/dts/overlays/smi-dev-overlay.dts -@@ -5,6 +5,8 @@ - /plugin/; - - /{ -+ compatible = "brcm,bcm2835"; -+ - fragment@0 { - target = <&soc>; - __overlay__ { diff --git a/target/linux/bcm27xx/patches-4.19/950-0795-tty-amba-pl011-Add-un-throttle-support.patch b/target/linux/bcm27xx/patches-4.19/950-0795-tty-amba-pl011-Add-un-throttle-support.patch new file mode 100644 index 0000000000..0ab6cf2fe9 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0795-tty-amba-pl011-Add-un-throttle-support.patch @@ -0,0 +1,61 @@ +From d4f4b57c667141ca98711cfcb30ae2b8deb1a034 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 24 Jan 2020 11:38:28 +0000 +Subject: [PATCH] tty: amba-pl011: Add un/throttle support + +The PL011 driver lacks throttle and unthrottle methods. As a result, +sending more data to the Pi than it can immediately sink while CRTSCTS +is enabled causes a NULL pointer to be followed. + +Add a throttle handler that disables the RX interrupts, and an +unthrottle handler that reenables them. + +Signed-off-by: Phil Elwell +--- + drivers/tty/serial/amba-pl011.c | 28 ++++++++++++++++++++++++++++ + 1 file changed, 28 insertions(+) + +--- a/drivers/tty/serial/amba-pl011.c ++++ b/drivers/tty/serial/amba-pl011.c +@@ -1323,6 +1323,32 @@ static void pl011_start_tx(struct uart_p + pl011_start_tx_pio(uap); + } + ++static void pl011_throttle(struct uart_port *port) ++{ ++ struct uart_amba_port *uap = ++ container_of(port, struct uart_amba_port, port); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&uap->port.lock, flags); ++ uap->im &= ~(UART011_RTIM | UART011_RXIM); ++ pl011_write(uap->im, uap, REG_IMSC); ++ spin_unlock_irqrestore(&uap->port.lock, flags); ++} ++ ++static void pl011_unthrottle(struct uart_port *port) ++{ ++ struct uart_amba_port *uap = ++ container_of(port, struct uart_amba_port, port); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&uap->port.lock, flags); ++ uap->im |= UART011_RTIM; ++ if (!pl011_dma_rx_running(uap)) ++ uap->im |= UART011_RXIM; ++ pl011_write(uap->im, uap, REG_IMSC); ++ spin_unlock_irqrestore(&uap->port.lock, flags); ++} ++ + static void pl011_stop_rx(struct uart_port *port) + { + struct uart_amba_port *uap = +@@ -2165,6 +2191,8 @@ static const struct uart_ops amba_pl011_ + .stop_tx = pl011_stop_tx, + .start_tx = pl011_start_tx, + .stop_rx = pl011_stop_rx, ++ .throttle = pl011_throttle, ++ .unthrottle = pl011_unthrottle, + .enable_ms = pl011_enable_ms, + .break_ctl = pl011_break_ctl, + .startup = pl011_startup, diff --git a/target/linux/bcm27xx/patches-4.19/950-0796-Fix-i2c-pwm-pca9685a-overlay.patch b/target/linux/bcm27xx/patches-4.19/950-0796-Fix-i2c-pwm-pca9685a-overlay.patch new file mode 100644 index 0000000000..e01e7fd669 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0796-Fix-i2c-pwm-pca9685a-overlay.patch @@ -0,0 +1,20 @@ +From 493aa5b9a2f57003dd0a16946eb56b08650090b4 Mon Sep 17 00:00:00 2001 +From: MikeDK +Date: Sun, 26 Jan 2020 23:33:54 +0100 +Subject: [PATCH] Fix i2c-pwm-pca9685a overlay + +--- + arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts ++++ b/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts +@@ -13,7 +13,7 @@ + status = "okay"; + + pca: pca@40 { +- compatible = "nxp,pca9685"; ++ compatible = "nxp,pca9685-pwm"; + #pwm-cells = <2>; + reg = <0x40>; + status = "okay"; diff --git a/target/linux/bcm27xx/patches-4.19/950-0796-tty-amba-pl011-Add-un-throttle-support.patch b/target/linux/bcm27xx/patches-4.19/950-0796-tty-amba-pl011-Add-un-throttle-support.patch deleted file mode 100644 index 0ab6cf2fe9..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0796-tty-amba-pl011-Add-un-throttle-support.patch +++ /dev/null @@ -1,61 +0,0 @@ -From d4f4b57c667141ca98711cfcb30ae2b8deb1a034 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 24 Jan 2020 11:38:28 +0000 -Subject: [PATCH] tty: amba-pl011: Add un/throttle support - -The PL011 driver lacks throttle and unthrottle methods. As a result, -sending more data to the Pi than it can immediately sink while CRTSCTS -is enabled causes a NULL pointer to be followed. - -Add a throttle handler that disables the RX interrupts, and an -unthrottle handler that reenables them. - -Signed-off-by: Phil Elwell ---- - drivers/tty/serial/amba-pl011.c | 28 ++++++++++++++++++++++++++++ - 1 file changed, 28 insertions(+) - ---- a/drivers/tty/serial/amba-pl011.c -+++ b/drivers/tty/serial/amba-pl011.c -@@ -1323,6 +1323,32 @@ static void pl011_start_tx(struct uart_p - pl011_start_tx_pio(uap); - } - -+static void pl011_throttle(struct uart_port *port) -+{ -+ struct uart_amba_port *uap = -+ container_of(port, struct uart_amba_port, port); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&uap->port.lock, flags); -+ uap->im &= ~(UART011_RTIM | UART011_RXIM); -+ pl011_write(uap->im, uap, REG_IMSC); -+ spin_unlock_irqrestore(&uap->port.lock, flags); -+} -+ -+static void pl011_unthrottle(struct uart_port *port) -+{ -+ struct uart_amba_port *uap = -+ container_of(port, struct uart_amba_port, port); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&uap->port.lock, flags); -+ uap->im |= UART011_RTIM; -+ if (!pl011_dma_rx_running(uap)) -+ uap->im |= UART011_RXIM; -+ pl011_write(uap->im, uap, REG_IMSC); -+ spin_unlock_irqrestore(&uap->port.lock, flags); -+} -+ - static void pl011_stop_rx(struct uart_port *port) - { - struct uart_amba_port *uap = -@@ -2165,6 +2191,8 @@ static const struct uart_ops amba_pl011_ - .stop_tx = pl011_stop_tx, - .start_tx = pl011_start_tx, - .stop_rx = pl011_stop_rx, -+ .throttle = pl011_throttle, -+ .unthrottle = pl011_unthrottle, - .enable_ms = pl011_enable_ms, - .break_ctl = pl011_break_ctl, - .startup = pl011_startup, diff --git a/target/linux/bcm27xx/patches-4.19/950-0797-Fix-i2c-pwm-pca9685a-overlay.patch b/target/linux/bcm27xx/patches-4.19/950-0797-Fix-i2c-pwm-pca9685a-overlay.patch deleted file mode 100644 index e01e7fd669..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0797-Fix-i2c-pwm-pca9685a-overlay.patch +++ /dev/null @@ -1,20 +0,0 @@ -From 493aa5b9a2f57003dd0a16946eb56b08650090b4 Mon Sep 17 00:00:00 2001 -From: MikeDK -Date: Sun, 26 Jan 2020 23:33:54 +0100 -Subject: [PATCH] Fix i2c-pwm-pca9685a overlay - ---- - arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts -+++ b/arch/arm/boot/dts/overlays/i2c-pwm-pca9685a-overlay.dts -@@ -13,7 +13,7 @@ - status = "okay"; - - pca: pca@40 { -- compatible = "nxp,pca9685"; -+ compatible = "nxp,pca9685-pwm"; - #pwm-cells = <2>; - reg = <0x40>; - status = "okay"; diff --git a/target/linux/bcm27xx/patches-4.19/950-0797-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-PRO-sound-.patch b/target/linux/bcm27xx/patches-4.19/950-0797-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-PRO-sound-.patch new file mode 100644 index 0000000000..233e368737 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0797-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-PRO-sound-.patch @@ -0,0 +1,89 @@ +From c23190019110e3314041f2184552a8343de55117 Mon Sep 17 00:00:00 2001 +From: j-schambacher +Date: Mon, 27 Jan 2020 17:45:51 +0100 +Subject: [PATCH] adds LED OFF feature to HiFiBerry DAC+ADC PRO sound + card + +This adds a DT overlay parameter 'leds_off' which allows +to switch off the onboard activity LEDs at all times +which has been requested by some users. + +Signed-off-by: Joerg Schambacher +--- + arch/arm/boot/dts/overlays/README | 2 ++ + .../overlays/hifiberry-dacplusadcpro-overlay.dts | 1 + + sound/soc/bcm/hifiberry_dacplusadcpro.c | 15 +++++++++++++-- + 3 files changed, 16 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -948,6 +948,8 @@ Params: 24db_digital_gain Allow ga + that does not result in clipping/distortion!) + slave Force DAC+ADC Pro into slave mode, using Pi as + master for bit clock and frame clock. ++ leds_off If set to 'true' the onboard indicator LEDs ++ are switched off at all times. + + + Name: hifiberry-dacplusdsp +--- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts +@@ -60,5 +60,6 @@ + 24db_digital_gain = + <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,24db_digital_gain?"; + slave = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,slave?"; ++ leds_off = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,leds_off?"; + }; + }; +--- a/sound/soc/bcm/hifiberry_dacplusadcpro.c ++++ b/sound/soc/bcm/hifiberry_dacplusadcpro.c +@@ -54,6 +54,7 @@ struct pcm512x_priv { + static bool slave; + static bool snd_rpi_hifiberry_is_dacpro; + static bool digital_gain_0db_limit = true; ++static bool leds_off; + + static const unsigned int pcm186x_adc_input_channel_sel_value[] = { + 0x00, 0x01, 0x02, 0x03, 0x10 +@@ -321,7 +322,10 @@ static int snd_rpi_hifiberry_dacplusadcp + + snd_soc_component_update_bits(dac, PCM512x_GPIO_EN, 0x08, 0x08); + snd_soc_component_update_bits(dac, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); +- snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); ++ if (leds_off) ++ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x00); ++ else ++ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); + + ret = pcm1863_add_controls(adc); + if (ret < 0) +@@ -331,7 +335,10 @@ static int snd_rpi_hifiberry_dacplusadcp + /* set GPIO2 to output, GPIO3 input */ + snd_soc_component_write(adc, PCM186X_GPIO3_2_CTRL, 0x00); + snd_soc_component_write(adc, PCM186X_GPIO3_2_DIR_CTRL, 0x04); +- snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x40); ++ if (leds_off) ++ snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x00); ++ else ++ snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x40); + + if (digital_gain_0db_limit) { + int ret; +@@ -417,6 +424,8 @@ static int snd_rpi_hifiberry_dacplusadcp + struct snd_soc_component *dac = rtd->codec_dais[0]->component; + struct snd_soc_component *adc = rtd->codec_dais[1]->component; + ++ if (leds_off) ++ return 0; + /* switch on respective LED */ + if (!substream->stream) + snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); +@@ -508,6 +517,8 @@ static int snd_rpi_hifiberry_dacplusadcp + pdev->dev.of_node, "hifiberry-dacplusadcpro,24db_digital_gain"); + slave = of_property_read_bool(pdev->dev.of_node, + "hifiberry-dacplusadcpro,slave"); ++ leds_off = of_property_read_bool(pdev->dev.of_node, ++ "hifiberry-dacplusadcpro,leds_off"); + ret = snd_soc_register_card(&snd_rpi_hifiberry_dacplusadcpro); + if (ret && ret != -EPROBE_DEFER) + dev_err(&pdev->dev, diff --git a/target/linux/bcm27xx/patches-4.19/950-0798-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-PRO-sound-.patch b/target/linux/bcm27xx/patches-4.19/950-0798-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-PRO-sound-.patch deleted file mode 100644 index 233e368737..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0798-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-PRO-sound-.patch +++ /dev/null @@ -1,89 +0,0 @@ -From c23190019110e3314041f2184552a8343de55117 Mon Sep 17 00:00:00 2001 -From: j-schambacher -Date: Mon, 27 Jan 2020 17:45:51 +0100 -Subject: [PATCH] adds LED OFF feature to HiFiBerry DAC+ADC PRO sound - card - -This adds a DT overlay parameter 'leds_off' which allows -to switch off the onboard activity LEDs at all times -which has been requested by some users. - -Signed-off-by: Joerg Schambacher ---- - arch/arm/boot/dts/overlays/README | 2 ++ - .../overlays/hifiberry-dacplusadcpro-overlay.dts | 1 + - sound/soc/bcm/hifiberry_dacplusadcpro.c | 15 +++++++++++++-- - 3 files changed, 16 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -948,6 +948,8 @@ Params: 24db_digital_gain Allow ga - that does not result in clipping/distortion!) - slave Force DAC+ADC Pro into slave mode, using Pi as - master for bit clock and frame clock. -+ leds_off If set to 'true' the onboard indicator LEDs -+ are switched off at all times. - - - Name: hifiberry-dacplusdsp ---- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadcpro-overlay.dts -@@ -60,5 +60,6 @@ - 24db_digital_gain = - <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,24db_digital_gain?"; - slave = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,slave?"; -+ leds_off = <&hifiberry_dacplusadcpro>,"hifiberry-dacplusadcpro,leds_off?"; - }; - }; ---- a/sound/soc/bcm/hifiberry_dacplusadcpro.c -+++ b/sound/soc/bcm/hifiberry_dacplusadcpro.c -@@ -54,6 +54,7 @@ struct pcm512x_priv { - static bool slave; - static bool snd_rpi_hifiberry_is_dacpro; - static bool digital_gain_0db_limit = true; -+static bool leds_off; - - static const unsigned int pcm186x_adc_input_channel_sel_value[] = { - 0x00, 0x01, 0x02, 0x03, 0x10 -@@ -321,7 +322,10 @@ static int snd_rpi_hifiberry_dacplusadcp - - snd_soc_component_update_bits(dac, PCM512x_GPIO_EN, 0x08, 0x08); - snd_soc_component_update_bits(dac, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); -- snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); -+ if (leds_off) -+ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x00); -+ else -+ snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); - - ret = pcm1863_add_controls(adc); - if (ret < 0) -@@ -331,7 +335,10 @@ static int snd_rpi_hifiberry_dacplusadcp - /* set GPIO2 to output, GPIO3 input */ - snd_soc_component_write(adc, PCM186X_GPIO3_2_CTRL, 0x00); - snd_soc_component_write(adc, PCM186X_GPIO3_2_DIR_CTRL, 0x04); -- snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x40); -+ if (leds_off) -+ snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x00); -+ else -+ snd_soc_component_update_bits(adc, PCM186X_GPIO_IN_OUT, 0x40, 0x40); - - if (digital_gain_0db_limit) { - int ret; -@@ -417,6 +424,8 @@ static int snd_rpi_hifiberry_dacplusadcp - struct snd_soc_component *dac = rtd->codec_dais[0]->component; - struct snd_soc_component *adc = rtd->codec_dais[1]->component; - -+ if (leds_off) -+ return 0; - /* switch on respective LED */ - if (!substream->stream) - snd_soc_component_update_bits(dac, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); -@@ -508,6 +517,8 @@ static int snd_rpi_hifiberry_dacplusadcp - pdev->dev.of_node, "hifiberry-dacplusadcpro,24db_digital_gain"); - slave = of_property_read_bool(pdev->dev.of_node, - "hifiberry-dacplusadcpro,slave"); -+ leds_off = of_property_read_bool(pdev->dev.of_node, -+ "hifiberry-dacplusadcpro,leds_off"); - ret = snd_soc_register_card(&snd_rpi_hifiberry_dacplusadcpro); - if (ret && ret != -EPROBE_DEFER) - dev_err(&pdev->dev, diff --git a/target/linux/bcm27xx/patches-4.19/950-0798-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-sound-card.patch b/target/linux/bcm27xx/patches-4.19/950-0798-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-sound-card.patch new file mode 100644 index 0000000000..2bc030666f --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0798-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-sound-card.patch @@ -0,0 +1,76 @@ +From ee513338448ddbb72ac8f76e7053865fe926a18c Mon Sep 17 00:00:00 2001 +From: j-schambacher +Date: Mon, 27 Jan 2020 20:37:34 +0100 +Subject: [PATCH] adds LED OFF feature to HiFiBerry DAC+ADC sound card + +This adds a DT overlay parameter 'leds_off' which allows +to switch off the onboard activity LEDs at all times +which has been requested by some users. + +Signed-off-by: Joerg Schambacher +--- + arch/arm/boot/dts/overlays/README | 2 ++ + .../boot/dts/overlays/hifiberry-dacplusadc-overlay.dts | 1 + + sound/soc/bcm/hifiberry_dacplusadc.c | 10 +++++++++- + 3 files changed, 12 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -927,6 +927,8 @@ Params: 24db_digital_gain Allow ga + that does not result in clipping/distortion!) + slave Force DAC+ Pro into slave mode, using Pi as + master for bit clock and frame clock. ++ leds_off If set to 'true' the onboard indicator LEDs ++ are switched off at all times. + + + Name: hifiberry-dacplusadcpro +--- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts +@@ -67,5 +67,6 @@ + 24db_digital_gain = + <&hifiberry_dacplusadc>,"hifiberry,24db_digital_gain?"; + slave = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,slave?"; ++ leds_off = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,leds_off?"; + }; + }; +--- a/sound/soc/bcm/hifiberry_dacplusadc.c ++++ b/sound/soc/bcm/hifiberry_dacplusadc.c +@@ -54,6 +54,7 @@ struct pcm512x_priv { + static bool slave; + static bool snd_rpi_hifiberry_is_dacpro; + static bool digital_gain_0db_limit = true; ++static bool leds_off; + + static void snd_rpi_hifiberry_dacplusadc_select_clk(struct snd_soc_component *component, + int clk_id) +@@ -175,7 +176,10 @@ static int snd_rpi_hifiberry_dacplusadc_ + + snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x08, 0x08); + snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); +- snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); ++ if (leds_off) ++ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x00); ++ else ++ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); + + if (digital_gain_0db_limit) { + int ret; +@@ -256,6 +260,8 @@ static int snd_rpi_hifiberry_dacplusadc_ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_component *component = rtd->codec_dai->component; + ++ if (leds_off) ++ return 0; + snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, + 0x08, 0x08); + hifiberry_dacplusadc_LED_cnt++; +@@ -347,6 +353,8 @@ static int snd_rpi_hifiberry_dacplusadc_ + pdev->dev.of_node, "hifiberry,24db_digital_gain"); + slave = of_property_read_bool(pdev->dev.of_node, + "hifiberry-dacplusadc,slave"); ++ leds_off = of_property_read_bool(pdev->dev.of_node, ++ "hifiberry-dacplusadc,leds_off"); + + ret = devm_snd_soc_register_card(&pdev->dev, + &snd_rpi_hifiberry_dacplusadc); diff --git a/target/linux/bcm27xx/patches-4.19/950-0799-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-sound-card.patch b/target/linux/bcm27xx/patches-4.19/950-0799-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-sound-card.patch deleted file mode 100644 index 2bc030666f..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0799-adds-LED-OFF-feature-to-HiFiBerry-DAC-ADC-sound-card.patch +++ /dev/null @@ -1,76 +0,0 @@ -From ee513338448ddbb72ac8f76e7053865fe926a18c Mon Sep 17 00:00:00 2001 -From: j-schambacher -Date: Mon, 27 Jan 2020 20:37:34 +0100 -Subject: [PATCH] adds LED OFF feature to HiFiBerry DAC+ADC sound card - -This adds a DT overlay parameter 'leds_off' which allows -to switch off the onboard activity LEDs at all times -which has been requested by some users. - -Signed-off-by: Joerg Schambacher ---- - arch/arm/boot/dts/overlays/README | 2 ++ - .../boot/dts/overlays/hifiberry-dacplusadc-overlay.dts | 1 + - sound/soc/bcm/hifiberry_dacplusadc.c | 10 +++++++++- - 3 files changed, 12 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -927,6 +927,8 @@ Params: 24db_digital_gain Allow ga - that does not result in clipping/distortion!) - slave Force DAC+ Pro into slave mode, using Pi as - master for bit clock and frame clock. -+ leds_off If set to 'true' the onboard indicator LEDs -+ are switched off at all times. - - - Name: hifiberry-dacplusadcpro ---- a/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplusadc-overlay.dts -@@ -67,5 +67,6 @@ - 24db_digital_gain = - <&hifiberry_dacplusadc>,"hifiberry,24db_digital_gain?"; - slave = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,slave?"; -+ leds_off = <&hifiberry_dacplusadc>,"hifiberry-dacplusadc,leds_off?"; - }; - }; ---- a/sound/soc/bcm/hifiberry_dacplusadc.c -+++ b/sound/soc/bcm/hifiberry_dacplusadc.c -@@ -54,6 +54,7 @@ struct pcm512x_priv { - static bool slave; - static bool snd_rpi_hifiberry_is_dacpro; - static bool digital_gain_0db_limit = true; -+static bool leds_off; - - static void snd_rpi_hifiberry_dacplusadc_select_clk(struct snd_soc_component *component, - int clk_id) -@@ -175,7 +176,10 @@ static int snd_rpi_hifiberry_dacplusadc_ - - snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x08, 0x08); - snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); -- snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); -+ if (leds_off) -+ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x00); -+ else -+ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); - - if (digital_gain_0db_limit) { - int ret; -@@ -256,6 +260,8 @@ static int snd_rpi_hifiberry_dacplusadc_ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_component *component = rtd->codec_dai->component; - -+ if (leds_off) -+ return 0; - snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, - 0x08, 0x08); - hifiberry_dacplusadc_LED_cnt++; -@@ -347,6 +353,8 @@ static int snd_rpi_hifiberry_dacplusadc_ - pdev->dev.of_node, "hifiberry,24db_digital_gain"); - slave = of_property_read_bool(pdev->dev.of_node, - "hifiberry-dacplusadc,slave"); -+ leds_off = of_property_read_bool(pdev->dev.of_node, -+ "hifiberry-dacplusadc,leds_off"); - - ret = devm_snd_soc_register_card(&pdev->dev, - &snd_rpi_hifiberry_dacplusadc); diff --git a/target/linux/bcm27xx/patches-4.19/950-0799-adds-LED-OFF-feature-to-HiFiBerry-DAC-DAC-PRO-sound-.patch b/target/linux/bcm27xx/patches-4.19/950-0799-adds-LED-OFF-feature-to-HiFiBerry-DAC-DAC-PRO-sound-.patch new file mode 100644 index 0000000000..68763fe27b --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0799-adds-LED-OFF-feature-to-HiFiBerry-DAC-DAC-PRO-sound-.patch @@ -0,0 +1,77 @@ +From 5eccee0e620b799558d89ebee29280116ad37e4f Mon Sep 17 00:00:00 2001 +From: j-schambacher +Date: Mon, 27 Jan 2020 20:58:24 +0100 +Subject: [PATCH] adds LED OFF feature to HiFiBerry DAC+/DAC+PRO sound + cards + +This adds a DT overlay parameter 'leds_off' which allows +to switch off the onboard activity LEDs at all times +which has been requested by some users. + +Signed-off-by: Joerg Schambacher +--- + arch/arm/boot/dts/overlays/README | 2 ++ + .../boot/dts/overlays/hifiberry-dacplus-overlay.dts | 1 + + sound/soc/bcm/hifiberry_dacplus.c | 10 +++++++++- + 3 files changed, 12 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -906,6 +906,8 @@ Params: 24db_digital_gain Allow ga + that does not result in clipping/distortion!) + slave Force DAC+ Pro into slave mode, using Pi as + master for bit clock and frame clock. ++ leds_off If set to 'true' the onboard indicator LEDs ++ are switched off at all times. + + + Name: hifiberry-dacplusadc +--- a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts ++++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts +@@ -55,5 +55,6 @@ + 24db_digital_gain = + <&hifiberry_dacplus>,"hifiberry,24db_digital_gain?"; + slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?"; ++ leds_off = <&hifiberry_dacplus>,"hifiberry-dacplus,leds_off?"; + }; + }; +--- a/sound/soc/bcm/hifiberry_dacplus.c ++++ b/sound/soc/bcm/hifiberry_dacplus.c +@@ -50,6 +50,7 @@ struct pcm512x_priv { + static bool slave; + static bool snd_rpi_hifiberry_is_dacpro; + static bool digital_gain_0db_limit = true; ++static bool leds_off; + + static void snd_rpi_hifiberry_dacplus_select_clk(struct snd_soc_component *component, + int clk_id) +@@ -171,7 +172,10 @@ static int snd_rpi_hifiberry_dacplus_ini + + snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x08, 0x08); + snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); +- snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); ++ if (leds_off) ++ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x00); ++ else ++ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); + + if (digital_gain_0db_limit) + { +@@ -251,6 +255,8 @@ static int snd_rpi_hifiberry_dacplus_sta + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_component *component = rtd->codec_dai->component; + ++ if (leds_off) ++ return 0; + snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); + return 0; + } +@@ -319,6 +325,8 @@ static int snd_rpi_hifiberry_dacplus_pro + pdev->dev.of_node, "hifiberry,24db_digital_gain"); + slave = of_property_read_bool(pdev->dev.of_node, + "hifiberry-dacplus,slave"); ++ leds_off = of_property_read_bool(pdev->dev.of_node, ++ "hifiberry-dacplus,leds_off"); + } + + ret = devm_snd_soc_register_card(&pdev->dev, diff --git a/target/linux/bcm27xx/patches-4.19/950-0800-adds-LED-OFF-feature-to-HiFiBerry-DAC-DAC-PRO-sound-.patch b/target/linux/bcm27xx/patches-4.19/950-0800-adds-LED-OFF-feature-to-HiFiBerry-DAC-DAC-PRO-sound-.patch deleted file mode 100644 index 68763fe27b..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0800-adds-LED-OFF-feature-to-HiFiBerry-DAC-DAC-PRO-sound-.patch +++ /dev/null @@ -1,77 +0,0 @@ -From 5eccee0e620b799558d89ebee29280116ad37e4f Mon Sep 17 00:00:00 2001 -From: j-schambacher -Date: Mon, 27 Jan 2020 20:58:24 +0100 -Subject: [PATCH] adds LED OFF feature to HiFiBerry DAC+/DAC+PRO sound - cards - -This adds a DT overlay parameter 'leds_off' which allows -to switch off the onboard activity LEDs at all times -which has been requested by some users. - -Signed-off-by: Joerg Schambacher ---- - arch/arm/boot/dts/overlays/README | 2 ++ - .../boot/dts/overlays/hifiberry-dacplus-overlay.dts | 1 + - sound/soc/bcm/hifiberry_dacplus.c | 10 +++++++++- - 3 files changed, 12 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -906,6 +906,8 @@ Params: 24db_digital_gain Allow ga - that does not result in clipping/distortion!) - slave Force DAC+ Pro into slave mode, using Pi as - master for bit clock and frame clock. -+ leds_off If set to 'true' the onboard indicator LEDs -+ are switched off at all times. - - - Name: hifiberry-dacplusadc ---- a/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts -+++ b/arch/arm/boot/dts/overlays/hifiberry-dacplus-overlay.dts -@@ -55,5 +55,6 @@ - 24db_digital_gain = - <&hifiberry_dacplus>,"hifiberry,24db_digital_gain?"; - slave = <&hifiberry_dacplus>,"hifiberry-dacplus,slave?"; -+ leds_off = <&hifiberry_dacplus>,"hifiberry-dacplus,leds_off?"; - }; - }; ---- a/sound/soc/bcm/hifiberry_dacplus.c -+++ b/sound/soc/bcm/hifiberry_dacplus.c -@@ -50,6 +50,7 @@ struct pcm512x_priv { - static bool slave; - static bool snd_rpi_hifiberry_is_dacpro; - static bool digital_gain_0db_limit = true; -+static bool leds_off; - - static void snd_rpi_hifiberry_dacplus_select_clk(struct snd_soc_component *component, - int clk_id) -@@ -171,7 +172,10 @@ static int snd_rpi_hifiberry_dacplus_ini - - snd_soc_component_update_bits(component, PCM512x_GPIO_EN, 0x08, 0x08); - snd_soc_component_update_bits(component, PCM512x_GPIO_OUTPUT_4, 0x0f, 0x02); -- snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); -+ if (leds_off) -+ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x00); -+ else -+ snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); - - if (digital_gain_0db_limit) - { -@@ -251,6 +255,8 @@ static int snd_rpi_hifiberry_dacplus_sta - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct snd_soc_component *component = rtd->codec_dai->component; - -+ if (leds_off) -+ return 0; - snd_soc_component_update_bits(component, PCM512x_GPIO_CONTROL_1, 0x08, 0x08); - return 0; - } -@@ -319,6 +325,8 @@ static int snd_rpi_hifiberry_dacplus_pro - pdev->dev.of_node, "hifiberry,24db_digital_gain"); - slave = of_property_read_bool(pdev->dev.of_node, - "hifiberry-dacplus,slave"); -+ leds_off = of_property_read_bool(pdev->dev.of_node, -+ "hifiberry-dacplus,leds_off"); - } - - ret = devm_snd_soc_register_card(&pdev->dev, diff --git a/target/linux/bcm27xx/patches-4.19/950-0800-pisound-Added-reading-Pisound-board-hardware-revisio.patch b/target/linux/bcm27xx/patches-4.19/950-0800-pisound-Added-reading-Pisound-board-hardware-revisio.patch new file mode 100644 index 0000000000..bb6afe328c --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0800-pisound-Added-reading-Pisound-board-hardware-revisio.patch @@ -0,0 +1,201 @@ +From a879ab9cad6b598c08988404934273d3cbfbd993 Mon Sep 17 00:00:00 2001 +From: gtrainavicius +Date: Tue, 28 Jan 2020 14:16:37 +0200 +Subject: [PATCH] pisound: Added reading Pisound board hardware + revision and exposing it (#3425) + +pisound: Added reading Pisound board hardware revision and exposing it in kernel log and sysfs file: + +/sys/kernel/pisound/hw_version + +Signed-off-by: Giedrius +--- + sound/soc/bcm/pisound.c | 86 ++++++++++++++++++++++++++++------------- + 1 file changed, 59 insertions(+), 27 deletions(-) + +--- a/sound/soc/bcm/pisound.c ++++ b/sound/soc/bcm/pisound.c +@@ -51,7 +51,8 @@ static void pisnd_spi_set_callback(pisnd + + static const char *pisnd_spi_get_serial(void); + static const char *pisnd_spi_get_id(void); +-static const char *pisnd_spi_get_version(void); ++static const char *pisnd_spi_get_fw_version(void); ++static const char *pisnd_spi_get_hw_version(void); + + static int pisnd_midi_init(struct snd_card *card); + static void pisnd_midi_uninit(void); +@@ -222,7 +223,9 @@ static pisnd_spi_recv_cb g_recvCallback; + + static char g_serial_num[11]; + static char g_id[25]; +-static char g_version[5]; ++enum { MAX_VERSION_STR_LEN = 6 }; ++static char g_fw_version[MAX_VERSION_STR_LEN]; ++static char g_hw_version[MAX_VERSION_STR_LEN]; + + static uint8_t g_ledFlashDuration; + static bool g_ledFlashDurationChanged; +@@ -558,7 +561,8 @@ static int spi_read_info(void) + char *p; + + memset(g_serial_num, 0, sizeof(g_serial_num)); +- memset(g_version, 0, sizeof(g_version)); ++ memset(g_fw_version, 0, sizeof(g_fw_version)); ++ strcpy(g_hw_version, "1.0"); // Assume 1.0 hw version. + memset(g_id, 0, sizeof(g_id)); + + tmp = spi_transfer16(0); +@@ -581,12 +585,28 @@ static int spi_read_info(void) + return -EINVAL; + + snprintf( +- g_version, +- sizeof(g_version), ++ g_fw_version, ++ MAX_VERSION_STR_LEN, + "%x.%02x", + buffer[0], + buffer[1] + ); ++ ++ g_fw_version[MAX_VERSION_STR_LEN-1] = '\0'; ++ break; ++ case 3: ++ if (n != 2) ++ return -EINVAL; ++ ++ snprintf( ++ g_hw_version, ++ MAX_VERSION_STR_LEN, ++ "%x.%x", ++ buffer[0], ++ buffer[1] ++ ); ++ ++ g_hw_version[MAX_VERSION_STR_LEN-1] = '\0'; + break; + case 1: + if (n >= sizeof(g_serial_num)) +@@ -596,12 +616,14 @@ static int spi_read_info(void) + break; + case 2: + { +- if (n >= sizeof(g_id)) ++ if (n*2 >= sizeof(g_id)) + return -EINVAL; + + p = g_id; + for (j = 0; j < n; ++j) + p += sprintf(p, "%02x", buffer[j]); ++ ++ *p = '\0'; + } + break; + default: +@@ -619,7 +641,8 @@ static int pisnd_spi_init(struct device + + memset(g_serial_num, 0, sizeof(g_serial_num)); + memset(g_id, 0, sizeof(g_id)); +- memset(g_version, 0, sizeof(g_version)); ++ memset(g_fw_version, 0, sizeof(g_fw_version)); ++ memset(g_hw_version, 0, sizeof(g_hw_version)); + + spi = pisnd_spi_find_device(); + +@@ -729,26 +752,22 @@ static void pisnd_spi_set_callback(pisnd + + static const char *pisnd_spi_get_serial(void) + { +- if (strlen(g_serial_num)) +- return g_serial_num; +- +- return ""; ++ return g_serial_num; + } + + static const char *pisnd_spi_get_id(void) + { +- if (strlen(g_id)) +- return g_id; +- +- return ""; ++ return g_id; + } + +-static const char *pisnd_spi_get_version(void) ++static const char *pisnd_spi_get_fw_version(void) + { +- if (strlen(g_version)) +- return g_version; ++ return g_fw_version; ++} + +- return ""; ++static const char *pisnd_spi_get_hw_version(void) ++{ ++ return g_hw_version; + } + + static const struct of_device_id pisound_of_match[] = { +@@ -1054,13 +1073,22 @@ static ssize_t pisnd_id_show( + return sprintf(buf, "%s\n", pisnd_spi_get_id()); + } + +-static ssize_t pisnd_version_show( ++static ssize_t pisnd_fw_version_show( + struct kobject *kobj, + struct kobj_attribute *attr, + char *buf + ) + { +- return sprintf(buf, "%s\n", pisnd_spi_get_version()); ++ return sprintf(buf, "%s\n", pisnd_spi_get_fw_version()); ++} ++ ++static ssize_t pisnd_hw_version_show( ++ struct kobject *kobj, ++ struct kobj_attribute *attr, ++ char *buf ++) ++{ ++ return sprintf(buf, "%s\n", pisnd_spi_get_hw_version()); + } + + static ssize_t pisnd_led_store( +@@ -1085,15 +1113,18 @@ static struct kobj_attribute pisnd_seria + __ATTR(serial, 0444, pisnd_serial_show, NULL); + static struct kobj_attribute pisnd_id_attribute = + __ATTR(id, 0444, pisnd_id_show, NULL); +-static struct kobj_attribute pisnd_version_attribute = +- __ATTR(version, 0444, pisnd_version_show, NULL); ++static struct kobj_attribute pisnd_fw_version_attribute = ++ __ATTR(version, 0444, pisnd_fw_version_show, NULL); ++static struct kobj_attribute pisnd_hw_version_attribute = ++__ATTR(hw_version, 0444, pisnd_hw_version_show, NULL); + static struct kobj_attribute pisnd_led_attribute = + __ATTR(led, 0644, NULL, pisnd_led_store); + + static struct attribute *attrs[] = { + &pisnd_serial_attribute.attr, + &pisnd_id_attribute.attr, +- &pisnd_version_attribute.attr, ++ &pisnd_fw_version_attribute.attr, ++ &pisnd_hw_version_attribute.attr, + &pisnd_led_attribute.attr, + NULL + }; +@@ -1112,9 +1143,10 @@ static int pisnd_probe(struct platform_d + } + + printi("Detected Pisound card:\n"); +- printi("\tSerial: %s\n", pisnd_spi_get_serial()); +- printi("\tVersion: %s\n", pisnd_spi_get_version()); +- printi("\tId: %s\n", pisnd_spi_get_id()); ++ printi("\tSerial: %s\n", pisnd_spi_get_serial()); ++ printi("\tFirmware Version: %s\n", pisnd_spi_get_fw_version()); ++ printi("\tHardware Version: %s\n", pisnd_spi_get_hw_version()); ++ printi("\tId: %s\n", pisnd_spi_get_id()); + + pisnd_kobj = kobject_create_and_add("pisound", kernel_kobj); + if (!pisnd_kobj) { diff --git a/target/linux/bcm27xx/patches-4.19/950-0801-mmc-sdhci-iproc-Fix-vmmc-regulators-on-iProc.patch b/target/linux/bcm27xx/patches-4.19/950-0801-mmc-sdhci-iproc-Fix-vmmc-regulators-on-iProc.patch new file mode 100644 index 0000000000..5046fc91e9 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0801-mmc-sdhci-iproc-Fix-vmmc-regulators-on-iProc.patch @@ -0,0 +1,46 @@ +From 5ee0de9d7abd644d4cb678fe26ac5130a1a8075f Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 2 Aug 2019 15:20:11 +0100 +Subject: [PATCH] mmc: sdhci-iproc: Fix vmmc regulators on iProc + +The Linux support for controlling card power via regulators appears to +be contentious. I would argue that the default behaviour is contrary to +the SDHCI spec - turning off the power writes a reserved value to the +SD Bus Voltage Select field of the Power Control Register, which +seems to kill the Arasan/iProc controller - but fortunately there is a +hook in sdhci_ops to override the behaviour. Borrow the implementation +from sdhci_arasan_set_power. + +Signed-off-by: Phil Elwell +--- + drivers/mmc/host/sdhci-iproc.c | 12 ++++++++++++ + 1 file changed, 12 insertions(+) + +--- a/drivers/mmc/host/sdhci-iproc.c ++++ b/drivers/mmc/host/sdhci-iproc.c +@@ -162,6 +162,17 @@ static void sdhci_iproc_writeb(struct sd + sdhci_iproc_writel(host, newval, reg & ~3); + } + ++static void sdhci_iproc_set_power(struct sdhci_host *host, unsigned char mode, ++ unsigned short vdd) ++{ ++ if (!IS_ERR(host->mmc->supply.vmmc)) { ++ struct mmc_host *mmc = host->mmc; ++ ++ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); ++ } ++ sdhci_set_power_noreg(host, mode, vdd); ++} ++ + static const struct sdhci_ops sdhci_iproc_ops = { + .set_clock = sdhci_set_clock, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, +@@ -178,6 +189,7 @@ static const struct sdhci_ops sdhci_ipro + .write_w = sdhci_iproc_writew, + .write_b = sdhci_iproc_writeb, + .set_clock = sdhci_set_clock, ++ .set_power = sdhci_iproc_set_power, + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, diff --git a/target/linux/bcm27xx/patches-4.19/950-0801-pisound-Added-reading-Pisound-board-hardware-revisio.patch b/target/linux/bcm27xx/patches-4.19/950-0801-pisound-Added-reading-Pisound-board-hardware-revisio.patch deleted file mode 100644 index bb6afe328c..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0801-pisound-Added-reading-Pisound-board-hardware-revisio.patch +++ /dev/null @@ -1,201 +0,0 @@ -From a879ab9cad6b598c08988404934273d3cbfbd993 Mon Sep 17 00:00:00 2001 -From: gtrainavicius -Date: Tue, 28 Jan 2020 14:16:37 +0200 -Subject: [PATCH] pisound: Added reading Pisound board hardware - revision and exposing it (#3425) - -pisound: Added reading Pisound board hardware revision and exposing it in kernel log and sysfs file: - -/sys/kernel/pisound/hw_version - -Signed-off-by: Giedrius ---- - sound/soc/bcm/pisound.c | 86 ++++++++++++++++++++++++++++------------- - 1 file changed, 59 insertions(+), 27 deletions(-) - ---- a/sound/soc/bcm/pisound.c -+++ b/sound/soc/bcm/pisound.c -@@ -51,7 +51,8 @@ static void pisnd_spi_set_callback(pisnd - - static const char *pisnd_spi_get_serial(void); - static const char *pisnd_spi_get_id(void); --static const char *pisnd_spi_get_version(void); -+static const char *pisnd_spi_get_fw_version(void); -+static const char *pisnd_spi_get_hw_version(void); - - static int pisnd_midi_init(struct snd_card *card); - static void pisnd_midi_uninit(void); -@@ -222,7 +223,9 @@ static pisnd_spi_recv_cb g_recvCallback; - - static char g_serial_num[11]; - static char g_id[25]; --static char g_version[5]; -+enum { MAX_VERSION_STR_LEN = 6 }; -+static char g_fw_version[MAX_VERSION_STR_LEN]; -+static char g_hw_version[MAX_VERSION_STR_LEN]; - - static uint8_t g_ledFlashDuration; - static bool g_ledFlashDurationChanged; -@@ -558,7 +561,8 @@ static int spi_read_info(void) - char *p; - - memset(g_serial_num, 0, sizeof(g_serial_num)); -- memset(g_version, 0, sizeof(g_version)); -+ memset(g_fw_version, 0, sizeof(g_fw_version)); -+ strcpy(g_hw_version, "1.0"); // Assume 1.0 hw version. - memset(g_id, 0, sizeof(g_id)); - - tmp = spi_transfer16(0); -@@ -581,12 +585,28 @@ static int spi_read_info(void) - return -EINVAL; - - snprintf( -- g_version, -- sizeof(g_version), -+ g_fw_version, -+ MAX_VERSION_STR_LEN, - "%x.%02x", - buffer[0], - buffer[1] - ); -+ -+ g_fw_version[MAX_VERSION_STR_LEN-1] = '\0'; -+ break; -+ case 3: -+ if (n != 2) -+ return -EINVAL; -+ -+ snprintf( -+ g_hw_version, -+ MAX_VERSION_STR_LEN, -+ "%x.%x", -+ buffer[0], -+ buffer[1] -+ ); -+ -+ g_hw_version[MAX_VERSION_STR_LEN-1] = '\0'; - break; - case 1: - if (n >= sizeof(g_serial_num)) -@@ -596,12 +616,14 @@ static int spi_read_info(void) - break; - case 2: - { -- if (n >= sizeof(g_id)) -+ if (n*2 >= sizeof(g_id)) - return -EINVAL; - - p = g_id; - for (j = 0; j < n; ++j) - p += sprintf(p, "%02x", buffer[j]); -+ -+ *p = '\0'; - } - break; - default: -@@ -619,7 +641,8 @@ static int pisnd_spi_init(struct device - - memset(g_serial_num, 0, sizeof(g_serial_num)); - memset(g_id, 0, sizeof(g_id)); -- memset(g_version, 0, sizeof(g_version)); -+ memset(g_fw_version, 0, sizeof(g_fw_version)); -+ memset(g_hw_version, 0, sizeof(g_hw_version)); - - spi = pisnd_spi_find_device(); - -@@ -729,26 +752,22 @@ static void pisnd_spi_set_callback(pisnd - - static const char *pisnd_spi_get_serial(void) - { -- if (strlen(g_serial_num)) -- return g_serial_num; -- -- return ""; -+ return g_serial_num; - } - - static const char *pisnd_spi_get_id(void) - { -- if (strlen(g_id)) -- return g_id; -- -- return ""; -+ return g_id; - } - --static const char *pisnd_spi_get_version(void) -+static const char *pisnd_spi_get_fw_version(void) - { -- if (strlen(g_version)) -- return g_version; -+ return g_fw_version; -+} - -- return ""; -+static const char *pisnd_spi_get_hw_version(void) -+{ -+ return g_hw_version; - } - - static const struct of_device_id pisound_of_match[] = { -@@ -1054,13 +1073,22 @@ static ssize_t pisnd_id_show( - return sprintf(buf, "%s\n", pisnd_spi_get_id()); - } - --static ssize_t pisnd_version_show( -+static ssize_t pisnd_fw_version_show( - struct kobject *kobj, - struct kobj_attribute *attr, - char *buf - ) - { -- return sprintf(buf, "%s\n", pisnd_spi_get_version()); -+ return sprintf(buf, "%s\n", pisnd_spi_get_fw_version()); -+} -+ -+static ssize_t pisnd_hw_version_show( -+ struct kobject *kobj, -+ struct kobj_attribute *attr, -+ char *buf -+) -+{ -+ return sprintf(buf, "%s\n", pisnd_spi_get_hw_version()); - } - - static ssize_t pisnd_led_store( -@@ -1085,15 +1113,18 @@ static struct kobj_attribute pisnd_seria - __ATTR(serial, 0444, pisnd_serial_show, NULL); - static struct kobj_attribute pisnd_id_attribute = - __ATTR(id, 0444, pisnd_id_show, NULL); --static struct kobj_attribute pisnd_version_attribute = -- __ATTR(version, 0444, pisnd_version_show, NULL); -+static struct kobj_attribute pisnd_fw_version_attribute = -+ __ATTR(version, 0444, pisnd_fw_version_show, NULL); -+static struct kobj_attribute pisnd_hw_version_attribute = -+__ATTR(hw_version, 0444, pisnd_hw_version_show, NULL); - static struct kobj_attribute pisnd_led_attribute = - __ATTR(led, 0644, NULL, pisnd_led_store); - - static struct attribute *attrs[] = { - &pisnd_serial_attribute.attr, - &pisnd_id_attribute.attr, -- &pisnd_version_attribute.attr, -+ &pisnd_fw_version_attribute.attr, -+ &pisnd_hw_version_attribute.attr, - &pisnd_led_attribute.attr, - NULL - }; -@@ -1112,9 +1143,10 @@ static int pisnd_probe(struct platform_d - } - - printi("Detected Pisound card:\n"); -- printi("\tSerial: %s\n", pisnd_spi_get_serial()); -- printi("\tVersion: %s\n", pisnd_spi_get_version()); -- printi("\tId: %s\n", pisnd_spi_get_id()); -+ printi("\tSerial: %s\n", pisnd_spi_get_serial()); -+ printi("\tFirmware Version: %s\n", pisnd_spi_get_fw_version()); -+ printi("\tHardware Version: %s\n", pisnd_spi_get_hw_version()); -+ printi("\tId: %s\n", pisnd_spi_get_id()); - - pisnd_kobj = kobject_create_and_add("pisound", kernel_kobj); - if (!pisnd_kobj) { diff --git a/target/linux/bcm27xx/patches-4.19/950-0802-ARM-dts-Declare-RPi-4B-SD-card-power-regulator.patch b/target/linux/bcm27xx/patches-4.19/950-0802-ARM-dts-Declare-RPi-4B-SD-card-power-regulator.patch new file mode 100644 index 0000000000..f08fd3d6ce --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0802-ARM-dts-Declare-RPi-4B-SD-card-power-regulator.patch @@ -0,0 +1,43 @@ +From 03bd617d5ba9124a59e86f285385b95415962af7 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 30 Jul 2019 12:37:02 +0100 +Subject: [PATCH] ARM: dts: Declare RPi 4B SD card power regulator + +Later revisions of the Raspberry Pi 4B have a separate control over the +SD card power. Expose that control to Linux as a fixed regulator with +a GPIO enable. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 11 +++++++++++ + arch/arm/configs/bcm2711_defconfig | 2 +- + arch/arm64/configs/bcm2711_defconfig | 2 +- + 3 files changed, 13 insertions(+), 2 deletions(-) + +--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +@@ -122,6 +122,16 @@ + states = <1800000 0x1 + 3300000 0x0>; + }; ++ ++ sd_vcc_reg: sd_vcc_reg { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc-sd"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ regulator-boot-on; ++ enable-active-high; ++ gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; ++ }; + }; + + &sdhost { +@@ -132,6 +142,7 @@ + status = "okay"; + broken-cd; + vqmmc-supply = <&sd_io_1v8_reg>; ++ vmmc-supply = <&sd_vcc_reg>; + }; + + &leds { diff --git a/target/linux/bcm27xx/patches-4.19/950-0802-mmc-sdhci-iproc-Fix-vmmc-regulators-on-iProc.patch b/target/linux/bcm27xx/patches-4.19/950-0802-mmc-sdhci-iproc-Fix-vmmc-regulators-on-iProc.patch deleted file mode 100644 index 5046fc91e9..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0802-mmc-sdhci-iproc-Fix-vmmc-regulators-on-iProc.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 5ee0de9d7abd644d4cb678fe26ac5130a1a8075f Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 2 Aug 2019 15:20:11 +0100 -Subject: [PATCH] mmc: sdhci-iproc: Fix vmmc regulators on iProc - -The Linux support for controlling card power via regulators appears to -be contentious. I would argue that the default behaviour is contrary to -the SDHCI spec - turning off the power writes a reserved value to the -SD Bus Voltage Select field of the Power Control Register, which -seems to kill the Arasan/iProc controller - but fortunately there is a -hook in sdhci_ops to override the behaviour. Borrow the implementation -from sdhci_arasan_set_power. - -Signed-off-by: Phil Elwell ---- - drivers/mmc/host/sdhci-iproc.c | 12 ++++++++++++ - 1 file changed, 12 insertions(+) - ---- a/drivers/mmc/host/sdhci-iproc.c -+++ b/drivers/mmc/host/sdhci-iproc.c -@@ -162,6 +162,17 @@ static void sdhci_iproc_writeb(struct sd - sdhci_iproc_writel(host, newval, reg & ~3); - } - -+static void sdhci_iproc_set_power(struct sdhci_host *host, unsigned char mode, -+ unsigned short vdd) -+{ -+ if (!IS_ERR(host->mmc->supply.vmmc)) { -+ struct mmc_host *mmc = host->mmc; -+ -+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); -+ } -+ sdhci_set_power_noreg(host, mode, vdd); -+} -+ - static const struct sdhci_ops sdhci_iproc_ops = { - .set_clock = sdhci_set_clock, - .get_max_clock = sdhci_pltfm_clk_get_max_clock, -@@ -178,6 +189,7 @@ static const struct sdhci_ops sdhci_ipro - .write_w = sdhci_iproc_writew, - .write_b = sdhci_iproc_writeb, - .set_clock = sdhci_set_clock, -+ .set_power = sdhci_iproc_set_power, - .get_max_clock = sdhci_pltfm_clk_get_max_clock, - .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, diff --git a/target/linux/bcm27xx/patches-4.19/950-0803-ARM-dts-Declare-RPi-4B-SD-card-power-regulator.patch b/target/linux/bcm27xx/patches-4.19/950-0803-ARM-dts-Declare-RPi-4B-SD-card-power-regulator.patch deleted file mode 100644 index f08fd3d6ce..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0803-ARM-dts-Declare-RPi-4B-SD-card-power-regulator.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 03bd617d5ba9124a59e86f285385b95415962af7 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 30 Jul 2019 12:37:02 +0100 -Subject: [PATCH] ARM: dts: Declare RPi 4B SD card power regulator - -Later revisions of the Raspberry Pi 4B have a separate control over the -SD card power. Expose that control to Linux as a fixed regulator with -a GPIO enable. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 11 +++++++++++ - arch/arm/configs/bcm2711_defconfig | 2 +- - arch/arm64/configs/bcm2711_defconfig | 2 +- - 3 files changed, 13 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -@@ -122,6 +122,16 @@ - states = <1800000 0x1 - 3300000 0x0>; - }; -+ -+ sd_vcc_reg: sd_vcc_reg { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc-sd"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-boot-on; -+ enable-active-high; -+ gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>; -+ }; - }; - - &sdhost { -@@ -132,6 +142,7 @@ - status = "okay"; - broken-cd; - vqmmc-supply = <&sd_io_1v8_reg>; -+ vmmc-supply = <&sd_vcc_reg>; - }; - - &leds { diff --git a/target/linux/bcm27xx/patches-4.19/950-0803-pcie-brcmstb-Bounce-buffer-support-is-for-BCM2711B0.patch b/target/linux/bcm27xx/patches-4.19/950-0803-pcie-brcmstb-Bounce-buffer-support-is-for-BCM2711B0.patch new file mode 100644 index 0000000000..05172ebcec --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0803-pcie-brcmstb-Bounce-buffer-support-is-for-BCM2711B0.patch @@ -0,0 +1,88 @@ +From 4b777f389e22abb364e398f45673e54bcda9cc55 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 12 Jul 2019 11:41:25 +0100 +Subject: [PATCH] pcie-brcmstb: Bounce buffer support is for BCM2711B0 + +Add a new compatible string to identify BCM2711B0, as later revisions +don't require the bounce buffer support. + +Signed-off-by: Phil Elwell +--- + drivers/pci/controller/pcie-brcmstb.c | 31 +++++++++++++++++++++++---- + 1 file changed, 27 insertions(+), 4 deletions(-) + +--- a/drivers/pci/controller/pcie-brcmstb.c ++++ b/drivers/pci/controller/pcie-brcmstb.c +@@ -206,6 +206,8 @@ enum pcie_type { + BCM7435, + GENERIC, + BCM7278, ++ BCM2711B0, ++ BCM2711, + }; + + struct brcm_window { +@@ -302,6 +304,20 @@ static const int pcie_offsets[] = { + [EXT_CFG_DATA] = 0x8000, + }; + ++static const struct pcie_cfg_data bcm2711b0_cfg = { ++ .reg_field_info = pcie_reg_field_info, ++ .offsets = pcie_offsets, ++ .max_burst_size = BURST_SIZE_128, ++ .type = BCM2711B0, ++}; ++ ++static const struct pcie_cfg_data bcm2711_cfg = { ++ .reg_field_info = pcie_reg_field_info, ++ .offsets = pcie_offsets, ++ .max_burst_size = BURST_SIZE_128, ++ .type = BCM2711, ++}; ++ + static const struct pcie_cfg_data bcm7435_cfg = { + .reg_field_info = pcie_reg_field_info, + .offsets = pcie_offsets, +@@ -312,7 +328,7 @@ static const struct pcie_cfg_data bcm743 + static const struct pcie_cfg_data generic_cfg = { + .reg_field_info = pcie_reg_field_info, + .offsets = pcie_offsets, +- .max_burst_size = BURST_SIZE_128, // before BURST_SIZE_512 ++ .max_burst_size = BURST_SIZE_512, + .type = GENERIC, + }; + +@@ -380,7 +396,7 @@ static unsigned int bounce_buffer = 32*1 + module_param(bounce_buffer, uint, 0644); + MODULE_PARM_DESC(bounce_buffer, "Size of bounce buffer"); + +-static unsigned int bounce_threshold = 0xc0000000; ++static unsigned int bounce_threshold; + module_param(bounce_threshold, uint, 0644); + MODULE_PARM_DESC(bounce_threshold, "Bounce threshold"); + +@@ -1681,6 +1697,8 @@ static int brcm_pcie_remove(struct platf + } + + static const struct of_device_id brcm_pcie_match[] = { ++ { .compatible = "brcm,bcm2711b0-pcie", .data = &bcm2711b0_cfg }, ++ { .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg }, + { .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg }, + { .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg }, + { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg }, +@@ -1736,8 +1754,13 @@ static int brcm_pcie_probe(struct platfo + if (IS_ERR(base)) + return PTR_ERR(base); + +- /* To Do: Add hardware check if this ever gets fixed */ +- if (max_pfn > (bounce_threshold/PAGE_SIZE)) { ++ if (!bounce_threshold) { ++ /* PCIe on BCM2711B0 can only address 3GB */ ++ if (pcie->type == BCM2711B0 || pcie->type == GENERIC) ++ bounce_threshold = 0xc0000000; ++ } ++ ++ if (bounce_threshold && (max_pfn > (bounce_threshold/PAGE_SIZE))) { + int ret; + ret = brcm_pcie_bounce_init(&pdev->dev, bounce_buffer, + (dma_addr_t)bounce_threshold); diff --git a/target/linux/bcm27xx/patches-4.19/950-0804-bcm2838.dtsi-Use-BCM2711-PCIe-compatible-string.patch b/target/linux/bcm27xx/patches-4.19/950-0804-bcm2838.dtsi-Use-BCM2711-PCIe-compatible-string.patch new file mode 100644 index 0000000000..9286c9b0b1 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0804-bcm2838.dtsi-Use-BCM2711-PCIe-compatible-string.patch @@ -0,0 +1,29 @@ +From bacf6a02fe12125d2d675f0c6238d9265d31b45f Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 12 Jul 2019 11:43:03 +0100 +Subject: [PATCH] bcm2838.dtsi: Use BCM2711 PCIe compatible string + +The BCM2711 PCIe controller has a limited address range in the B0 +silicon, and the driver uses a compatible string to identify the +limitation. The current Pi 4 firmware will override the compatible +string if it detects a downstream DTB and it is running on a newer +revision but set the default value to enable the workaround for +backwards-compatibility with old firmware. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2838.dtsi | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/bcm2838.dtsi ++++ b/arch/arm/boot/dts/bcm2838.dtsi +@@ -327,7 +327,8 @@ + #interrupt-cells = <1>; + #size-cells = <2>; + bus-range = <0x0 0x01>; +- compatible = "brcm,bcm7211-pcie", "brcm,bcm7445-pcie", ++ compatible = "brcm,bcm2711b0-pcie", // Safe value ++ "brcm,bcm2711-pcie", + "brcm,pci-plat-dev"; + max-link-speed = <2>; + tot-num-pcie = <1>; diff --git a/target/linux/bcm27xx/patches-4.19/950-0804-pcie-brcmstb-Bounce-buffer-support-is-for-BCM2711B0.patch b/target/linux/bcm27xx/patches-4.19/950-0804-pcie-brcmstb-Bounce-buffer-support-is-for-BCM2711B0.patch deleted file mode 100644 index 05172ebcec..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0804-pcie-brcmstb-Bounce-buffer-support-is-for-BCM2711B0.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 4b777f389e22abb364e398f45673e54bcda9cc55 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 12 Jul 2019 11:41:25 +0100 -Subject: [PATCH] pcie-brcmstb: Bounce buffer support is for BCM2711B0 - -Add a new compatible string to identify BCM2711B0, as later revisions -don't require the bounce buffer support. - -Signed-off-by: Phil Elwell ---- - drivers/pci/controller/pcie-brcmstb.c | 31 +++++++++++++++++++++++---- - 1 file changed, 27 insertions(+), 4 deletions(-) - ---- a/drivers/pci/controller/pcie-brcmstb.c -+++ b/drivers/pci/controller/pcie-brcmstb.c -@@ -206,6 +206,8 @@ enum pcie_type { - BCM7435, - GENERIC, - BCM7278, -+ BCM2711B0, -+ BCM2711, - }; - - struct brcm_window { -@@ -302,6 +304,20 @@ static const int pcie_offsets[] = { - [EXT_CFG_DATA] = 0x8000, - }; - -+static const struct pcie_cfg_data bcm2711b0_cfg = { -+ .reg_field_info = pcie_reg_field_info, -+ .offsets = pcie_offsets, -+ .max_burst_size = BURST_SIZE_128, -+ .type = BCM2711B0, -+}; -+ -+static const struct pcie_cfg_data bcm2711_cfg = { -+ .reg_field_info = pcie_reg_field_info, -+ .offsets = pcie_offsets, -+ .max_burst_size = BURST_SIZE_128, -+ .type = BCM2711, -+}; -+ - static const struct pcie_cfg_data bcm7435_cfg = { - .reg_field_info = pcie_reg_field_info, - .offsets = pcie_offsets, -@@ -312,7 +328,7 @@ static const struct pcie_cfg_data bcm743 - static const struct pcie_cfg_data generic_cfg = { - .reg_field_info = pcie_reg_field_info, - .offsets = pcie_offsets, -- .max_burst_size = BURST_SIZE_128, // before BURST_SIZE_512 -+ .max_burst_size = BURST_SIZE_512, - .type = GENERIC, - }; - -@@ -380,7 +396,7 @@ static unsigned int bounce_buffer = 32*1 - module_param(bounce_buffer, uint, 0644); - MODULE_PARM_DESC(bounce_buffer, "Size of bounce buffer"); - --static unsigned int bounce_threshold = 0xc0000000; -+static unsigned int bounce_threshold; - module_param(bounce_threshold, uint, 0644); - MODULE_PARM_DESC(bounce_threshold, "Bounce threshold"); - -@@ -1681,6 +1697,8 @@ static int brcm_pcie_remove(struct platf - } - - static const struct of_device_id brcm_pcie_match[] = { -+ { .compatible = "brcm,bcm2711b0-pcie", .data = &bcm2711b0_cfg }, -+ { .compatible = "brcm,bcm2711-pcie", .data = &bcm2711_cfg }, - { .compatible = "brcm,bcm7425-pcie", .data = &bcm7425_cfg }, - { .compatible = "brcm,bcm7435-pcie", .data = &bcm7435_cfg }, - { .compatible = "brcm,bcm7278-pcie", .data = &bcm7278_cfg }, -@@ -1736,8 +1754,13 @@ static int brcm_pcie_probe(struct platfo - if (IS_ERR(base)) - return PTR_ERR(base); - -- /* To Do: Add hardware check if this ever gets fixed */ -- if (max_pfn > (bounce_threshold/PAGE_SIZE)) { -+ if (!bounce_threshold) { -+ /* PCIe on BCM2711B0 can only address 3GB */ -+ if (pcie->type == BCM2711B0 || pcie->type == GENERIC) -+ bounce_threshold = 0xc0000000; -+ } -+ -+ if (bounce_threshold && (max_pfn > (bounce_threshold/PAGE_SIZE))) { - int ret; - ret = brcm_pcie_bounce_init(&pdev->dev, bounce_buffer, - (dma_addr_t)bounce_threshold); diff --git a/target/linux/bcm27xx/patches-4.19/950-0805-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch b/target/linux/bcm27xx/patches-4.19/950-0805-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch new file mode 100644 index 0000000000..7a0b8c5cb6 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0805-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch @@ -0,0 +1,146 @@ +From 8aa8fd89094952e3201b927fb846ba61b30cab6b Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 29 Jan 2020 11:29:06 +0000 +Subject: [PATCH] ARM: dts: Remove bcm2838-rpi-4-b.dts + +Upstream are not going to use the bcm2838 identifier, so begin the +cleanup by removing the suggested upstream Pi 4 .dts file. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/Makefile | 1 - + arch/arm/boot/dts/bcm2838-rpi-4-b.dts | 118 -------------------------- + 2 files changed, 119 deletions(-) + delete mode 100644 arch/arm/boot/dts/bcm2838-rpi-4-b.dts + +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -95,7 +95,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2836-rpi-2-b.dtb \ + bcm2837-rpi-3-b.dtb \ + bcm2837-rpi-3-b-plus.dtb \ +- bcm2838-rpi-4-b.dtb \ + bcm2835-rpi-zero.dtb \ + bcm2835-rpi-zero-w.dtb + dtb-$(CONFIG_ARCH_BCM_5301X) += \ +--- a/arch/arm/boot/dts/bcm2838-rpi-4-b.dts ++++ /dev/null +@@ -1,118 +0,0 @@ +-// SPDX-License-Identifier: GPL-2.0 +-/dts-v1/; +-#include "bcm2838.dtsi" +-#include "bcm2835-rpi.dtsi" +-#include "bcm2838-rpi.dtsi" +- +-/ { +- compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; +- model = "Raspberry Pi 4 Model B"; +- +- chosen { +- /* 8250 auxiliary UART instead of pl011 */ +- stdout-path = "serial1:115200n8"; +- }; +- +- memory@0 { +- reg = <0 0 0x40000000>; +- }; +- +- leds { +- act { +- gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; +- }; +- +- pwr { +- label = "PWR"; +- gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; +- }; +- }; +- +- wifi_pwrseq: wifi-pwrseq { +- compatible = "mmc-pwrseq-simple"; +- reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; +- }; +- +- sd_io_1v8_reg: sd_io_1v8_reg { +- status = "okay"; +- compatible = "regulator-gpio"; +- vin-supply = <&vdd_5v0_reg>; +- regulator-name = "vdd-sd-io"; +- regulator-min-microvolt = <1800000>; +- regulator-max-microvolt = <3300000>; +- regulator-boot-on; +- regulator-always-on; +- regulator-settling-time-us = <5000>; +- +- gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; +- states = <1800000 0x1 +- 3300000 0x0>; +- }; +-}; +- +-&firmware { +- expgpio: gpio { +- compatible = "raspberrypi,firmware-gpio"; +- gpio-controller; +- #gpio-cells = <2>; +- gpio-line-names = "BT_ON", +- "WL_ON", +- "PWR_LED_OFF", +- "GLOBAL_RESET", +- "VDD_SD_IO_SEL", +- "CAM_GPIO", +- "", +- ""; +- status = "okay"; +- }; +-}; +- +-&pwm1 { +- pinctrl-names = "default"; +- pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; +- status = "okay"; +-}; +- +-/* SDHCI is used to control the SDIO for wireless */ +-&sdhci { +- #address-cells = <1>; +- #size-cells = <0>; +- pinctrl-names = "default"; +- pinctrl-0 = <&emmc_gpio34>; +- status = "okay"; +- bus-width = <4>; +- non-removable; +- mmc-pwrseq = <&wifi_pwrseq>; +- +- brcmf: wifi@1 { +- reg = <1>; +- compatible = "brcm,bcm4329-fmac"; +- }; +-}; +- +-/* EMMC2 is used to drive the SD card */ +-&emmc2 { +- status = "okay"; +- broken-cd; +- vqmmc-supply = <&sd_io_1v8_reg>; +-}; +- +-/* uart0 communicates with the BT module */ +-&uart0 { +- pinctrl-names = "default"; +- pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; +- status = "okay"; +- +- bluetooth { +- compatible = "brcm,bcm43438-bt"; +- max-speed = <2000000>; +- shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; +- }; +-}; +- +-/* uart1 is mapped to the pin header */ +-&uart1 { +- pinctrl-names = "default"; +- pinctrl-0 = <&uart1_gpio14>; +- status = "okay"; +-}; diff --git a/target/linux/bcm27xx/patches-4.19/950-0805-bcm2838.dtsi-Use-BCM2711-PCIe-compatible-string.patch b/target/linux/bcm27xx/patches-4.19/950-0805-bcm2838.dtsi-Use-BCM2711-PCIe-compatible-string.patch deleted file mode 100644 index 9286c9b0b1..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0805-bcm2838.dtsi-Use-BCM2711-PCIe-compatible-string.patch +++ /dev/null @@ -1,29 +0,0 @@ -From bacf6a02fe12125d2d675f0c6238d9265d31b45f Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Fri, 12 Jul 2019 11:43:03 +0100 -Subject: [PATCH] bcm2838.dtsi: Use BCM2711 PCIe compatible string - -The BCM2711 PCIe controller has a limited address range in the B0 -silicon, and the driver uses a compatible string to identify the -limitation. The current Pi 4 firmware will override the compatible -string if it detects a downstream DTB and it is running on a newer -revision but set the default value to enable the workaround for -backwards-compatibility with old firmware. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2838.dtsi | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/bcm2838.dtsi -+++ b/arch/arm/boot/dts/bcm2838.dtsi -@@ -327,7 +327,8 @@ - #interrupt-cells = <1>; - #size-cells = <2>; - bus-range = <0x0 0x01>; -- compatible = "brcm,bcm7211-pcie", "brcm,bcm7445-pcie", -+ compatible = "brcm,bcm2711b0-pcie", // Safe value -+ "brcm,bcm2711-pcie", - "brcm,pci-plat-dev"; - max-link-speed = <2>; - tot-num-pcie = <1>; diff --git a/target/linux/bcm27xx/patches-4.19/950-0806-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch b/target/linux/bcm27xx/patches-4.19/950-0806-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch deleted file mode 100644 index 7a0b8c5cb6..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0806-ARM-dts-Remove-bcm2838-rpi-4-b.dts.patch +++ /dev/null @@ -1,146 +0,0 @@ -From 8aa8fd89094952e3201b927fb846ba61b30cab6b Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 29 Jan 2020 11:29:06 +0000 -Subject: [PATCH] ARM: dts: Remove bcm2838-rpi-4-b.dts - -Upstream are not going to use the bcm2838 identifier, so begin the -cleanup by removing the suggested upstream Pi 4 .dts file. - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/Makefile | 1 - - arch/arm/boot/dts/bcm2838-rpi-4-b.dts | 118 -------------------------- - 2 files changed, 119 deletions(-) - delete mode 100644 arch/arm/boot/dts/bcm2838-rpi-4-b.dts - ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -95,7 +95,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ - bcm2836-rpi-2-b.dtb \ - bcm2837-rpi-3-b.dtb \ - bcm2837-rpi-3-b-plus.dtb \ -- bcm2838-rpi-4-b.dtb \ - bcm2835-rpi-zero.dtb \ - bcm2835-rpi-zero-w.dtb - dtb-$(CONFIG_ARCH_BCM_5301X) += \ ---- a/arch/arm/boot/dts/bcm2838-rpi-4-b.dts -+++ /dev/null -@@ -1,118 +0,0 @@ --// SPDX-License-Identifier: GPL-2.0 --/dts-v1/; --#include "bcm2838.dtsi" --#include "bcm2835-rpi.dtsi" --#include "bcm2838-rpi.dtsi" -- --/ { -- compatible = "raspberrypi,4-model-b", "brcm,bcm2711"; -- model = "Raspberry Pi 4 Model B"; -- -- chosen { -- /* 8250 auxiliary UART instead of pl011 */ -- stdout-path = "serial1:115200n8"; -- }; -- -- memory@0 { -- reg = <0 0 0x40000000>; -- }; -- -- leds { -- act { -- gpios = <&gpio 42 GPIO_ACTIVE_HIGH>; -- }; -- -- pwr { -- label = "PWR"; -- gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; -- }; -- }; -- -- wifi_pwrseq: wifi-pwrseq { -- compatible = "mmc-pwrseq-simple"; -- reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>; -- }; -- -- sd_io_1v8_reg: sd_io_1v8_reg { -- status = "okay"; -- compatible = "regulator-gpio"; -- vin-supply = <&vdd_5v0_reg>; -- regulator-name = "vdd-sd-io"; -- regulator-min-microvolt = <1800000>; -- regulator-max-microvolt = <3300000>; -- regulator-boot-on; -- regulator-always-on; -- regulator-settling-time-us = <5000>; -- -- gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>; -- states = <1800000 0x1 -- 3300000 0x0>; -- }; --}; -- --&firmware { -- expgpio: gpio { -- compatible = "raspberrypi,firmware-gpio"; -- gpio-controller; -- #gpio-cells = <2>; -- gpio-line-names = "BT_ON", -- "WL_ON", -- "PWR_LED_OFF", -- "GLOBAL_RESET", -- "VDD_SD_IO_SEL", -- "CAM_GPIO", -- "", -- ""; -- status = "okay"; -- }; --}; -- --&pwm1 { -- pinctrl-names = "default"; -- pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>; -- status = "okay"; --}; -- --/* SDHCI is used to control the SDIO for wireless */ --&sdhci { -- #address-cells = <1>; -- #size-cells = <0>; -- pinctrl-names = "default"; -- pinctrl-0 = <&emmc_gpio34>; -- status = "okay"; -- bus-width = <4>; -- non-removable; -- mmc-pwrseq = <&wifi_pwrseq>; -- -- brcmf: wifi@1 { -- reg = <1>; -- compatible = "brcm,bcm4329-fmac"; -- }; --}; -- --/* EMMC2 is used to drive the SD card */ --&emmc2 { -- status = "okay"; -- broken-cd; -- vqmmc-supply = <&sd_io_1v8_reg>; --}; -- --/* uart0 communicates with the BT module */ --&uart0 { -- pinctrl-names = "default"; -- pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>; -- status = "okay"; -- -- bluetooth { -- compatible = "brcm,bcm43438-bt"; -- max-speed = <2000000>; -- shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>; -- }; --}; -- --/* uart1 is mapped to the pin header */ --&uart1 { -- pinctrl-names = "default"; -- pinctrl-0 = <&uart1_gpio14>; -- status = "okay"; --}; diff --git a/target/linux/bcm27xx/patches-4.19/950-0806-tty-amba-pl011-Avoid-rare-write-when-full-error.patch b/target/linux/bcm27xx/patches-4.19/950-0806-tty-amba-pl011-Avoid-rare-write-when-full-error.patch new file mode 100644 index 0000000000..8deb882a98 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0806-tty-amba-pl011-Avoid-rare-write-when-full-error.patch @@ -0,0 +1,42 @@ +From 8ef5143f743a4e922fdf0029f81452d3d7003daf Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 29 Jan 2020 09:35:19 +0000 +Subject: [PATCH] tty: amba-pl011: Avoid rare write-when-full error + +Under some circumstances on BCM283x processors data loss can be +observed - a single byte missing from the TX output stream. These bytes +are always the last byte of a batch of 8 written from pl011_tx_chars +when from_irq is true, meaning that the FIFO full flag is not checked +before writing. + +The transmit optimisation relies on the FIFO being half-empty when the +TX interrupt is raised. Instrumenting the driver further showed that +the failure case correlated with the TX FIFO full flag being set at the +point where the last byte was written to the data register, which +explains the data loss but not how the FIFO appeared to be prematurely +full. A possible explanation is that a FIFO write was in flight at the +time the interrupt was raised, but as yet there is no hypothesis as to +how this might occur. + +In the absence of a clear understanding of the failure mechanism, avoid +the problem by checking the FIFO levels before writing the last byte of +the group, which will have minimal performance impact. + +Signed-off-by: Phil Elwell +--- + drivers/tty/serial/amba-pl011.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/tty/serial/amba-pl011.c ++++ b/drivers/tty/serial/amba-pl011.c +@@ -1444,6 +1444,10 @@ static bool pl011_tx_chars(struct uart_a + if (likely(from_irq) && count-- == 0) + break; + ++ if (likely(from_irq) && count == 0 && ++ pl011_read(uap, REG_FR) & UART01x_FR_TXFF) ++ break; ++ + if (!pl011_tx_char(uap, xmit->buf[xmit->tail], from_irq)) + break; + diff --git a/target/linux/bcm27xx/patches-4.19/950-0807-tty-amba-pl011-Avoid-rare-write-when-full-error.patch b/target/linux/bcm27xx/patches-4.19/950-0807-tty-amba-pl011-Avoid-rare-write-when-full-error.patch deleted file mode 100644 index 8deb882a98..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0807-tty-amba-pl011-Avoid-rare-write-when-full-error.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 8ef5143f743a4e922fdf0029f81452d3d7003daf Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 29 Jan 2020 09:35:19 +0000 -Subject: [PATCH] tty: amba-pl011: Avoid rare write-when-full error - -Under some circumstances on BCM283x processors data loss can be -observed - a single byte missing from the TX output stream. These bytes -are always the last byte of a batch of 8 written from pl011_tx_chars -when from_irq is true, meaning that the FIFO full flag is not checked -before writing. - -The transmit optimisation relies on the FIFO being half-empty when the -TX interrupt is raised. Instrumenting the driver further showed that -the failure case correlated with the TX FIFO full flag being set at the -point where the last byte was written to the data register, which -explains the data loss but not how the FIFO appeared to be prematurely -full. A possible explanation is that a FIFO write was in flight at the -time the interrupt was raised, but as yet there is no hypothesis as to -how this might occur. - -In the absence of a clear understanding of the failure mechanism, avoid -the problem by checking the FIFO levels before writing the last byte of -the group, which will have minimal performance impact. - -Signed-off-by: Phil Elwell ---- - drivers/tty/serial/amba-pl011.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/tty/serial/amba-pl011.c -+++ b/drivers/tty/serial/amba-pl011.c -@@ -1444,6 +1444,10 @@ static bool pl011_tx_chars(struct uart_a - if (likely(from_irq) && count-- == 0) - break; - -+ if (likely(from_irq) && count == 0 && -+ pl011_read(uap, REG_FR) & UART01x_FR_TXFF) -+ break; -+ - if (!pl011_tx_char(uap, xmit->buf[xmit->tail], from_irq)) - break; - diff --git a/target/linux/bcm27xx/patches-4.19/950-0807-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch b/target/linux/bcm27xx/patches-4.19/950-0807-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch new file mode 100644 index 0000000000..ba1e9d4af4 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0807-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch @@ -0,0 +1,84 @@ +From fd483c4e43a983d90c308c4d668e83be4fd6a392 Mon Sep 17 00:00:00 2001 +From: Tim Gover <990920+timg236@users.noreply.github.com> +Date: Wed, 15 Jan 2020 11:26:19 +0000 +Subject: [PATCH] usb: xhci: Raspberry Pi FW loader for VIA VL805 + +The VL805 FW may either be loaded from an SPI EEPROM or alternatively +loaded directly by the VideoCore firmware. A PCI reset will reset +the VL805 XHCI controller on the Raspberry Pi4 requiring the firmware +to be reloaded if an SPI EEPROM is not present. + +Use a VideoCore mailbox to trigger the loading of the VL805 +firmware (if necessary) after a PCI reset. + +Signed-off-by: Tim Gover +--- + drivers/usb/host/pci-quirks.c | 31 +++++++++++++++++++++- + include/soc/bcm2835/raspberrypi-firmware.h | 2 +- + 2 files changed, 31 insertions(+), 2 deletions(-) + +--- a/drivers/usb/host/pci-quirks.c ++++ b/drivers/usb/host/pci-quirks.c +@@ -18,7 +18,7 @@ + #include + #include "pci-quirks.h" + #include "xhci-ext-caps.h" +- ++#include + + #define UHCI_USBLEGSUP 0xc0 /* legacy support */ + #define UHCI_USBCMD 0 /* command register */ +@@ -632,6 +632,32 @@ EXPORT_SYMBOL_GPL(usb_amd_pt_check_port) + + #endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */ + ++/* The VL805 firmware may either be loaded from an EEPROM or by the BIOS into ++ * memory. If run from memory it must be reloaded after a PCI fundmental reset. ++ * The Raspberry Pi firmware acts as the BIOS in this case. ++ */ ++static void usb_vl805_init(struct pci_dev *pdev) ++{ ++#if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE) ++ struct rpi_firmware *fw; ++ struct { ++ u32 dev_addr; ++ } packet; ++ int ret; ++ ++ fw = rpi_firmware_get(NULL); ++ if (!fw) ++ return; ++ ++ packet.dev_addr = (pdev->bus->number << 20) | ++ (PCI_SLOT(pdev->devfn) << 15) | (PCI_FUNC(pdev->devfn) << 12); ++ ++ dev_dbg(&pdev->dev, "RPI_FIRMWARE_NOTIFY_XHCI_RESET %x", packet.dev_addr); ++ ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, ++ &packet, sizeof(packet)); ++#endif ++} ++ + #if IS_ENABLED(CONFIG_USB_UHCI_HCD) + + /* +@@ -1226,6 +1252,9 @@ hc_init: + if (pdev->vendor == PCI_VENDOR_ID_INTEL) + usb_enable_intel_xhci_ports(pdev); + ++ if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) ++ usb_vl805_init(pdev); ++ + op_reg_base = base + XHCI_HC_LENGTH(readl(base)); + + /* Wait for the host controller to be ready before writing any +--- a/include/soc/bcm2835/raspberrypi-firmware.h ++++ b/include/soc/bcm2835/raspberrypi-firmware.h +@@ -98,7 +98,7 @@ enum rpi_firmware_property_tag { + RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045, + RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049, + RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050, +- ++ RPI_FIRMWARE_NOTIFY_XHCI_RESET = 0x00030058, + + /* Dispmanx TAGS */ + RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001, diff --git a/target/linux/bcm27xx/patches-4.19/950-0808-overlays-Correct-the-eth_led-colour-assignments.patch b/target/linux/bcm27xx/patches-4.19/950-0808-overlays-Correct-the-eth_led-colour-assignments.patch new file mode 100644 index 0000000000..1130964209 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0808-overlays-Correct-the-eth_led-colour-assignments.patch @@ -0,0 +1,51 @@ +From 8a120b47005fccce4534f8a73c3a3deda92f95fa Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 29 Jan 2020 14:32:51 +0000 +Subject: [PATCH] overlays: Correct the eth_led* colour assignments + +See: https://github.com/raspberrypi/firmware/issues/1311 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 17 +++++++++-------- + 1 file changed, 9 insertions(+), 8 deletions(-) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -109,27 +109,28 @@ Params: + Legal values are 2, 3, 4, 5 and 0, where + 0 means never downshift (default 2). Pi3B+ only. + +- eth_led0 Set mode of LED0 (usually orange). The legal +- values are: ++ eth_led0 Set mode of LED0 - amber on Pi3B+ (default "1"), ++ green on Pi4 (default "0"). ++ The legal values are: + + Pi3B+ + +- 0=link/activity 1=link1000/activity (default) ++ 0=link/activity 1=link1000/activity + 2=link100/activity 3=link10/activity + 4=link100/1000/activity 5=link10/1000/activity + 6=link10/100/activity 14=off 15=on + + Pi4 + +- 0=Speed/Activity (default) 1=Speed +- 2=Speed/Flash activity 3=FDX ++ 0=Speed/Activity 1=Speed ++ 2=Flash activity 3=FDX + 4=Off 5=On + 6=Alt 7=Speed/Flash + 8=Link 9=Activity + +- eth_led1 Set mode of LED1 (usually green) (Pi3B+ default +- "6", Pi4 default "8"). See eth_led0 for legal +- values. ++ eth_led1 Set mode of LED1 - green on Pi3B (default "6"), ++ amber on Pi4 (default "8"). See eth_led0 for ++ legal values. + + eth_max_speed Set the maximum speed a link is allowed + to negotiate. Legal values are 10, 100 and diff --git a/target/linux/bcm27xx/patches-4.19/950-0808-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch b/target/linux/bcm27xx/patches-4.19/950-0808-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch deleted file mode 100644 index ba1e9d4af4..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0808-usb-xhci-Raspberry-Pi-FW-loader-for-VIA-VL805.patch +++ /dev/null @@ -1,84 +0,0 @@ -From fd483c4e43a983d90c308c4d668e83be4fd6a392 Mon Sep 17 00:00:00 2001 -From: Tim Gover <990920+timg236@users.noreply.github.com> -Date: Wed, 15 Jan 2020 11:26:19 +0000 -Subject: [PATCH] usb: xhci: Raspberry Pi FW loader for VIA VL805 - -The VL805 FW may either be loaded from an SPI EEPROM or alternatively -loaded directly by the VideoCore firmware. A PCI reset will reset -the VL805 XHCI controller on the Raspberry Pi4 requiring the firmware -to be reloaded if an SPI EEPROM is not present. - -Use a VideoCore mailbox to trigger the loading of the VL805 -firmware (if necessary) after a PCI reset. - -Signed-off-by: Tim Gover ---- - drivers/usb/host/pci-quirks.c | 31 +++++++++++++++++++++- - include/soc/bcm2835/raspberrypi-firmware.h | 2 +- - 2 files changed, 31 insertions(+), 2 deletions(-) - ---- a/drivers/usb/host/pci-quirks.c -+++ b/drivers/usb/host/pci-quirks.c -@@ -18,7 +18,7 @@ - #include - #include "pci-quirks.h" - #include "xhci-ext-caps.h" -- -+#include - - #define UHCI_USBLEGSUP 0xc0 /* legacy support */ - #define UHCI_USBCMD 0 /* command register */ -@@ -632,6 +632,32 @@ EXPORT_SYMBOL_GPL(usb_amd_pt_check_port) - - #endif /* CONFIG_PCI_DISABLE_COMMON_QUIRKS */ - -+/* The VL805 firmware may either be loaded from an EEPROM or by the BIOS into -+ * memory. If run from memory it must be reloaded after a PCI fundmental reset. -+ * The Raspberry Pi firmware acts as the BIOS in this case. -+ */ -+static void usb_vl805_init(struct pci_dev *pdev) -+{ -+#if IS_ENABLED(CONFIG_RASPBERRYPI_FIRMWARE) -+ struct rpi_firmware *fw; -+ struct { -+ u32 dev_addr; -+ } packet; -+ int ret; -+ -+ fw = rpi_firmware_get(NULL); -+ if (!fw) -+ return; -+ -+ packet.dev_addr = (pdev->bus->number << 20) | -+ (PCI_SLOT(pdev->devfn) << 15) | (PCI_FUNC(pdev->devfn) << 12); -+ -+ dev_dbg(&pdev->dev, "RPI_FIRMWARE_NOTIFY_XHCI_RESET %x", packet.dev_addr); -+ ret = rpi_firmware_property(fw, RPI_FIRMWARE_NOTIFY_XHCI_RESET, -+ &packet, sizeof(packet)); -+#endif -+} -+ - #if IS_ENABLED(CONFIG_USB_UHCI_HCD) - - /* -@@ -1226,6 +1252,9 @@ hc_init: - if (pdev->vendor == PCI_VENDOR_ID_INTEL) - usb_enable_intel_xhci_ports(pdev); - -+ if (pdev->vendor == PCI_VENDOR_ID_VIA && pdev->device == 0x3483) -+ usb_vl805_init(pdev); -+ - op_reg_base = base + XHCI_HC_LENGTH(readl(base)); - - /* Wait for the host controller to be ready before writing any ---- a/include/soc/bcm2835/raspberrypi-firmware.h -+++ b/include/soc/bcm2835/raspberrypi-firmware.h -@@ -98,7 +98,7 @@ enum rpi_firmware_property_tag { - RPI_FIRMWARE_SET_PERIPH_REG = 0x00038045, - RPI_FIRMWARE_GET_POE_HAT_VAL = 0x00030049, - RPI_FIRMWARE_SET_POE_HAT_VAL = 0x00030050, -- -+ RPI_FIRMWARE_NOTIFY_XHCI_RESET = 0x00030058, - - /* Dispmanx TAGS */ - RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE = 0x00040001, diff --git a/target/linux/bcm27xx/patches-4.19/950-0809-overlays-Correct-the-eth_led-colour-assignments.patch b/target/linux/bcm27xx/patches-4.19/950-0809-overlays-Correct-the-eth_led-colour-assignments.patch deleted file mode 100644 index 1130964209..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0809-overlays-Correct-the-eth_led-colour-assignments.patch +++ /dev/null @@ -1,51 +0,0 @@ -From 8a120b47005fccce4534f8a73c3a3deda92f95fa Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Wed, 29 Jan 2020 14:32:51 +0000 -Subject: [PATCH] overlays: Correct the eth_led* colour assignments - -See: https://github.com/raspberrypi/firmware/issues/1311 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/README | 17 +++++++++-------- - 1 file changed, 9 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -109,27 +109,28 @@ Params: - Legal values are 2, 3, 4, 5 and 0, where - 0 means never downshift (default 2). Pi3B+ only. - -- eth_led0 Set mode of LED0 (usually orange). The legal -- values are: -+ eth_led0 Set mode of LED0 - amber on Pi3B+ (default "1"), -+ green on Pi4 (default "0"). -+ The legal values are: - - Pi3B+ - -- 0=link/activity 1=link1000/activity (default) -+ 0=link/activity 1=link1000/activity - 2=link100/activity 3=link10/activity - 4=link100/1000/activity 5=link10/1000/activity - 6=link10/100/activity 14=off 15=on - - Pi4 - -- 0=Speed/Activity (default) 1=Speed -- 2=Speed/Flash activity 3=FDX -+ 0=Speed/Activity 1=Speed -+ 2=Flash activity 3=FDX - 4=Off 5=On - 6=Alt 7=Speed/Flash - 8=Link 9=Activity - -- eth_led1 Set mode of LED1 (usually green) (Pi3B+ default -- "6", Pi4 default "8"). See eth_led0 for legal -- values. -+ eth_led1 Set mode of LED1 - green on Pi3B (default "6"), -+ amber on Pi4 (default "8"). See eth_led0 for -+ legal values. - - eth_max_speed Set the maximum speed a link is allowed - to negotiate. Legal values are 10, 100 and diff --git a/target/linux/bcm27xx/patches-4.19/950-0809-overlays-Remove-hack-from-uart0-overlay.patch b/target/linux/bcm27xx/patches-4.19/950-0809-overlays-Remove-hack-from-uart0-overlay.patch new file mode 100644 index 0000000000..ca582b8141 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0809-overlays-Remove-hack-from-uart0-overlay.patch @@ -0,0 +1,45 @@ +From b006cc7ddfa96c044068ef367c0bc82c2d221ca3 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 1 Oct 2019 10:19:50 +0100 +Subject: [PATCH] overlays: Remove hack from uart0 overlay + +The uart0 overlay contained a hack to return GPIOs 14 and 15 to inputs +when the UART0 function was moved to alternative pins. This has the +unwanted side effect of claiming GPIOs 14 & 15, preventing them being +used for something else. + +See: https://github.com/raspberrypi/linux/issues/2856 + https://www.raspberrypi.org/forums/viewtopic.php?f=98&t=252911 + +Signed-off-by: Stefan Enge +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/uart0-overlay.dts | 13 ++++++------- + 1 file changed, 6 insertions(+), 7 deletions(-) + +--- a/arch/arm/boot/dts/overlays/uart0-overlay.dts ++++ b/arch/arm/boot/dts/overlays/uart0-overlay.dts +@@ -17,17 +17,16 @@ + target = <&gpio>; + __overlay__ { + uart0_pins: uart0_pins { +- brcm,pins = <14 15 14 15>; +- brcm,function = <0 0 4 4>; /* alt0 */ +- brcm,pull = <0 0 0 2>; ++ brcm,pins = <14 15>; ++ brcm,function = <4>; /* alt0 */ ++ brcm,pull = <0 2>; + }; + }; + }; + + __overrides__ { +- txd0_pin = <&uart0_pins>,"brcm,pins:8"; +- rxd0_pin = <&uart0_pins>,"brcm,pins:12"; +- pin_func = <&uart0_pins>,"brcm,function:8", +- <&uart0_pins>,"brcm,function:12"; ++ txd0_pin = <&uart0_pins>,"brcm,pins:0"; ++ rxd0_pin = <&uart0_pins>,"brcm,pins:4"; ++ pin_func = <&uart0_pins>,"brcm,function:0"; + }; + }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0810-ARM-dts-Add-sd_poll_once-dtparam-to-bcm283x-2711.patch b/target/linux/bcm27xx/patches-4.19/950-0810-ARM-dts-Add-sd_poll_once-dtparam-to-bcm283x-2711.patch new file mode 100644 index 0000000000..449380bd7b --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0810-ARM-dts-Add-sd_poll_once-dtparam-to-bcm283x-2711.patch @@ -0,0 +1,59 @@ +From d7044f06dea839c61a01e6016a4b9dee15543f8d Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 30 Jan 2020 09:47:00 +0000 +Subject: [PATCH] ARM: dts: Add sd_poll_once dtparam to bcm283x/2711 + +The old sdtweak overlay allowed the SD interface to be effectively +disabled unless there was a card present at boot time, but that +overlay doesn't work on bcm2711 and has largely been replaced by +a set of sd_* dtparams (which have the advantage of being board- +specific. + +Add an sd_poll_once dtparam to allow the same functionality on +all Raspberry Pi boards. + +See: https://github.com/raspberrypi/linux/issues/3286 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2708-rpi.dtsi | 1 + + arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 2 ++ + arch/arm/boot/dts/overlays/README | 7 +++++++ + 3 files changed, 10 insertions(+) + +--- a/arch/arm/boot/dts/bcm2708-rpi.dtsi ++++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi +@@ -92,6 +92,7 @@ + watchdog = <&watchdog>,"status"; + random = <&random>,"status"; + sd_overclock = <&sdhost>,"brcm,overclock-50:0"; ++ sd_poll_once = <&sdhost>,"non-removable?"; + sd_force_pio = <&sdhost>,"brcm,force-pio?"; + sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; + sd_debug = <&sdhost>,"brcm,debug"; +--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +@@ -349,5 +349,7 @@ + + eth_led0 = <&phy1>,"led-modes:0"; + eth_led1 = <&phy1>,"led-modes:4"; ++ ++ sd_poll_once = <&emmc2>, "non-removable?"; + }; + }; +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -165,6 +165,13 @@ Params: + sd_overclock Clock (in MHz) to use when the MMC framework + requests 50MHz + ++ sd_poll_once Looks for a card once after booting. Useful ++ for network booting scenarios to avoid the ++ overhead of continuous polling. N.B. Using ++ this option restricts the system to using a ++ single card per boot (or none at all). ++ (default off) ++ + sd_force_pio Disable DMA support for SD driver (default off) + + sd_pio_limit Number of blocks above which to use DMA for diff --git a/target/linux/bcm27xx/patches-4.19/950-0810-overlays-Remove-hack-from-uart0-overlay.patch b/target/linux/bcm27xx/patches-4.19/950-0810-overlays-Remove-hack-from-uart0-overlay.patch deleted file mode 100644 index ca582b8141..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0810-overlays-Remove-hack-from-uart0-overlay.patch +++ /dev/null @@ -1,45 +0,0 @@ -From b006cc7ddfa96c044068ef367c0bc82c2d221ca3 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 1 Oct 2019 10:19:50 +0100 -Subject: [PATCH] overlays: Remove hack from uart0 overlay - -The uart0 overlay contained a hack to return GPIOs 14 and 15 to inputs -when the UART0 function was moved to alternative pins. This has the -unwanted side effect of claiming GPIOs 14 & 15, preventing them being -used for something else. - -See: https://github.com/raspberrypi/linux/issues/2856 - https://www.raspberrypi.org/forums/viewtopic.php?f=98&t=252911 - -Signed-off-by: Stefan Enge -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/uart0-overlay.dts | 13 ++++++------- - 1 file changed, 6 insertions(+), 7 deletions(-) - ---- a/arch/arm/boot/dts/overlays/uart0-overlay.dts -+++ b/arch/arm/boot/dts/overlays/uart0-overlay.dts -@@ -17,17 +17,16 @@ - target = <&gpio>; - __overlay__ { - uart0_pins: uart0_pins { -- brcm,pins = <14 15 14 15>; -- brcm,function = <0 0 4 4>; /* alt0 */ -- brcm,pull = <0 0 0 2>; -+ brcm,pins = <14 15>; -+ brcm,function = <4>; /* alt0 */ -+ brcm,pull = <0 2>; - }; - }; - }; - - __overrides__ { -- txd0_pin = <&uart0_pins>,"brcm,pins:8"; -- rxd0_pin = <&uart0_pins>,"brcm,pins:12"; -- pin_func = <&uart0_pins>,"brcm,function:8", -- <&uart0_pins>,"brcm,function:12"; -+ txd0_pin = <&uart0_pins>,"brcm,pins:0"; -+ rxd0_pin = <&uart0_pins>,"brcm,pins:4"; -+ pin_func = <&uart0_pins>,"brcm,function:0"; - }; - }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0811-ARM-dts-Add-sd_poll_once-dtparam-to-bcm283x-2711.patch b/target/linux/bcm27xx/patches-4.19/950-0811-ARM-dts-Add-sd_poll_once-dtparam-to-bcm283x-2711.patch deleted file mode 100644 index 449380bd7b..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0811-ARM-dts-Add-sd_poll_once-dtparam-to-bcm283x-2711.patch +++ /dev/null @@ -1,59 +0,0 @@ -From d7044f06dea839c61a01e6016a4b9dee15543f8d Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Thu, 30 Jan 2020 09:47:00 +0000 -Subject: [PATCH] ARM: dts: Add sd_poll_once dtparam to bcm283x/2711 - -The old sdtweak overlay allowed the SD interface to be effectively -disabled unless there was a card present at boot time, but that -overlay doesn't work on bcm2711 and has largely been replaced by -a set of sd_* dtparams (which have the advantage of being board- -specific. - -Add an sd_poll_once dtparam to allow the same functionality on -all Raspberry Pi boards. - -See: https://github.com/raspberrypi/linux/issues/3286 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/bcm2708-rpi.dtsi | 1 + - arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 2 ++ - arch/arm/boot/dts/overlays/README | 7 +++++++ - 3 files changed, 10 insertions(+) - ---- a/arch/arm/boot/dts/bcm2708-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2708-rpi.dtsi -@@ -92,6 +92,7 @@ - watchdog = <&watchdog>,"status"; - random = <&random>,"status"; - sd_overclock = <&sdhost>,"brcm,overclock-50:0"; -+ sd_poll_once = <&sdhost>,"non-removable?"; - sd_force_pio = <&sdhost>,"brcm,force-pio?"; - sd_pio_limit = <&sdhost>,"brcm,pio-limit:0"; - sd_debug = <&sdhost>,"brcm,debug"; ---- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts -@@ -349,5 +349,7 @@ - - eth_led0 = <&phy1>,"led-modes:0"; - eth_led1 = <&phy1>,"led-modes:4"; -+ -+ sd_poll_once = <&emmc2>, "non-removable?"; - }; - }; ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -165,6 +165,13 @@ Params: - sd_overclock Clock (in MHz) to use when the MMC framework - requests 50MHz - -+ sd_poll_once Looks for a card once after booting. Useful -+ for network booting scenarios to avoid the -+ overhead of continuous polling. N.B. Using -+ this option restricts the system to using a -+ single card per boot (or none at all). -+ (default off) -+ - sd_force_pio Disable DMA support for SD driver (default off) - - sd_pio_limit Number of blocks above which to use DMA for diff --git a/target/linux/bcm27xx/patches-4.19/950-0811-overlays-Add-ssd1306-spi-overlay-3440.patch b/target/linux/bcm27xx/patches-4.19/950-0811-overlays-Add-ssd1306-spi-overlay-3440.patch new file mode 100644 index 0000000000..e27893d9ac --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0811-overlays-Add-ssd1306-spi-overlay-3440.patch @@ -0,0 +1,132 @@ +From db048a80e63c66607b3bd73fa641802ec83bf166 Mon Sep 17 00:00:00 2001 +From: MikeDK +Date: Fri, 31 Jan 2020 10:57:21 +0100 +Subject: [PATCH] overlays: Add ssd1306-spi overlay (#3440) + +Add an overlay for SSD1306 based OLED boards using SPI. +This will load the staging fbtft driver. + +Signed-off-by: Michael Kaplan +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 12 +++ + .../boot/dts/overlays/ssd1306-spi-overlay.dts | 82 +++++++++++++++++++ + 3 files changed, 95 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -168,6 +168,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + spi6-1cs.dtbo \ + spi6-2cs.dtbo \ + ssd1306.dtbo \ ++ ssd1306-spi.dtbo \ + superaudioboard.dtbo \ + sx150x.dtbo \ + tc358743.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -2428,6 +2428,18 @@ Params: address Location + https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf + + ++Name: ssd1306-spi ++Info: Overlay for SSD1306 OLED via SPI using fbtft staging driver. ++Load: dtoverlay=ssd1306-spi,= ++Params: speed SPI bus speed (default 10000000) ++ rotate Display rotation (0, 90, 180 or 270; default 0) ++ fps Delay between frame updates (default 25) ++ debug Debug output level (0-7; default 0) ++ dc_pin GPIO pin for D/C (default 24) ++ reset_pin GPIO pin for RESET (default 25) ++ height Display height (32 or 64; default 64) ++ ++ + Name: superaudioboard + Info: Configures the SuperAudioBoard sound card + Load: dtoverlay=superaudioboard,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts +@@ -0,0 +1,82 @@ ++/* ++ * Device Tree overlay for SSD1306 based SPI OLED display ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ ssd1306_pins: ssd1306_pins { ++ brcm,pins = <25 24>; ++ brcm,function = <1 1>; /* out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ssd1306: ssd1306@0{ ++ compatible = "solomon,ssd1306"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ssd1306_pins>; ++ ++ spi-max-frequency = <10000000>; ++ bgr = <0>; ++ bpp = <1>; ++ rotate = <0>; ++ fps = <25>; ++ buswidth = <8>; ++ reset-gpios = <&gpio 25 0>; ++ dc-gpios = <&gpio 24 0>; ++ debug = <0>; ++ ++ solomon,height = <64>; ++ solomon,width = <128>; ++ solomon,page-offset = <0>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&ssd1306>,"spi-max-frequency:0"; ++ rotate = <&ssd1306>,"rotate:0"; ++ fps = <&ssd1306>,"fps:0"; ++ debug = <&ssd1306>,"debug:0"; ++ dc_pin = <&ssd1306>,"dc-gpios:4>"; ++ reset_pin = <&ssd1306>,"reset-gpios:4>"; ++ height = <&ssd1306>,"solomon,height:0>"; ++ }; ++}; diff --git a/target/linux/bcm27xx/patches-4.19/950-0812-overlays-Add-sh1106-spi-and-ssd1351-spi-overlays-344.patch b/target/linux/bcm27xx/patches-4.19/950-0812-overlays-Add-sh1106-spi-and-ssd1351-spi-overlays-344.patch new file mode 100644 index 0000000000..4dc8e0943a --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0812-overlays-Add-sh1106-spi-and-ssd1351-spi-overlays-344.patch @@ -0,0 +1,248 @@ +From 1b8ea7066ee06404e0148702bc3e85a191f6d867 Mon Sep 17 00:00:00 2001 +From: MikeDK +Date: Fri, 31 Jan 2020 12:45:43 +0100 +Subject: [PATCH] overlays: Add sh1106-spi and ssd1351-spi overlays + (#3442) + +Add overlays for SH1106 and SSD1351 based OLED displays. +SH1106 is present in many 1.3 inch OLEDs and SSD1351 is present in +1.5 inch RGB OLEDs from AliExpress. + +This will load the staging fbtft drivers. + +Signed-off-by: Michael Kaplan +--- + arch/arm/boot/dts/overlays/Makefile | 2 + + arch/arm/boot/dts/overlays/README | 23 ++++++ + .../boot/dts/overlays/sh1106-spi-overlay.dts | 82 +++++++++++++++++++ + .../boot/dts/overlays/ssd1351-spi-overlay.dts | 81 ++++++++++++++++++ + 4 files changed, 188 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts + create mode 100644 arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -145,6 +145,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + sdhost.dtbo \ + sdio.dtbo \ + sdtweak.dtbo \ ++ sh1106-spi.dtbo \ + smi.dtbo \ + smi-dev.dtbo \ + smi-nand.dtbo \ +@@ -169,6 +170,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + spi6-2cs.dtbo \ + ssd1306.dtbo \ + ssd1306-spi.dtbo \ ++ ssd1351-spi.dtbo \ + superaudioboard.dtbo \ + sx150x.dtbo \ + tc358743.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -2145,6 +2145,18 @@ Params: overclock_50 Clock (i + (default on) + + ++Name: sh1106-spi ++Info: Overlay for SH1106 OLED via SPI using fbtft staging driver. ++Load: dtoverlay=sh1106-spi,= ++Params: speed SPI bus speed (default 4000000) ++ rotate Display rotation (0, 90, 180 or 270; default 0) ++ fps Delay between frame updates (default 25) ++ debug Debug output level (0-7; default 0) ++ dc_pin GPIO pin for D/C (default 24) ++ reset_pin GPIO pin for RESET (default 25) ++ height Display height (32 or 64; default 64) ++ ++ + Name: smi + Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25! + Load: dtoverlay=smi +@@ -2440,6 +2452,17 @@ Params: speed SPI bus + height Display height (32 or 64; default 64) + + ++Name: ssd1351-spi ++Info: Overlay for SSD1351 OLED via SPI using fbtft staging driver. ++Load: dtoverlay=ssd1351-spi,= ++Params: speed SPI bus speed (default 4500000) ++ rotate Display rotation (0, 90, 180 or 270; default 0) ++ fps Delay between frame updates (default 25) ++ debug Debug output level (0-7; default 0) ++ dc_pin GPIO pin for D/C (default 24) ++ reset_pin GPIO pin for RESET (default 25) ++ ++ + Name: superaudioboard + Info: Configures the SuperAudioBoard sound card + Load: dtoverlay=superaudioboard,= +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts +@@ -0,0 +1,82 @@ ++/* ++ * Device Tree overlay for SH1106 based SPI OLED display ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ sh1106_pins: sh1106_pins { ++ brcm,pins = <25 24>; ++ brcm,function = <1 1>; /* out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ sh1106: sh1106@0{ ++ compatible = "sinowealth,sh1106"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sh1106_pins>; ++ ++ spi-max-frequency = <4000000>; ++ bgr = <0>; ++ bpp = <1>; ++ rotate = <0>; ++ fps = <25>; ++ buswidth = <8>; ++ reset-gpios = <&gpio 25 0>; ++ dc-gpios = <&gpio 24 0>; ++ debug = <0>; ++ ++ sinowealth,height = <64>; ++ sinowealth,width = <128>; ++ sinowealth,page-offset = <0>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&sh1106>,"spi-max-frequency:0"; ++ rotate = <&sh1106>,"rotate:0"; ++ fps = <&sh1106>,"fps:0"; ++ debug = <&sh1106>,"debug:0"; ++ dc_pin = <&sh1106>,"dc-gpios:4>"; ++ reset_pin = <&sh1106>,"reset-gpios:4>"; ++ height = <&sh1106>,"sinowealth,height:0>"; ++ }; ++}; +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts +@@ -0,0 +1,81 @@ ++/* ++ * Device Tree overlay for SSD1351 based SPI OLED display ++ * ++ */ ++ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835"; ++ ++ fragment@0 { ++ target = <&spi0>; ++ __overlay__ { ++ status = "okay"; ++ }; ++ }; ++ ++ fragment@1 { ++ target = <&spidev0>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@2 { ++ target = <&spidev1>; ++ __overlay__ { ++ status = "disabled"; ++ }; ++ }; ++ ++ fragment@3 { ++ target = <&gpio>; ++ __overlay__ { ++ ssd1351_pins: ssd1351_pins { ++ brcm,pins = <25 24>; ++ brcm,function = <1 1>; /* out out */ ++ }; ++ }; ++ }; ++ ++ fragment@4 { ++ target = <&spi0>; ++ __overlay__ { ++ /* needed to avoid dtc warning */ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ssd1351: ssd1351@0{ ++ compatible = "solomon,ssd1351"; ++ reg = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ssd1351_pins>; ++ ++ spi-max-frequency = <4500000>; ++ bgr = <0>; ++ bpp = <16>; ++ rotate = <0>; ++ fps = <25>; ++ buswidth = <8>; ++ reset-gpios = <&gpio 25 0>; ++ dc-gpios = <&gpio 24 0>; ++ debug = <0>; ++ ++ solomon,height = <128>; ++ solomon,width = <128>; ++ solomon,page-offset = <0>; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ speed = <&ssd1351>,"spi-max-frequency:0"; ++ rotate = <&ssd1351>,"rotate:0"; ++ fps = <&ssd1351>,"fps:0"; ++ debug = <&ssd1351>,"debug:0"; ++ dc_pin = <&ssd1351>,"dc-gpios:4>"; ++ reset_pin = <&ssd1351>,"reset-gpios:4>"; ++ }; ++}; diff --git a/target/linux/bcm27xx/patches-4.19/950-0812-overlays-Add-ssd1306-spi-overlay-3440.patch b/target/linux/bcm27xx/patches-4.19/950-0812-overlays-Add-ssd1306-spi-overlay-3440.patch deleted file mode 100644 index e27893d9ac..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0812-overlays-Add-ssd1306-spi-overlay-3440.patch +++ /dev/null @@ -1,132 +0,0 @@ -From db048a80e63c66607b3bd73fa641802ec83bf166 Mon Sep 17 00:00:00 2001 -From: MikeDK -Date: Fri, 31 Jan 2020 10:57:21 +0100 -Subject: [PATCH] overlays: Add ssd1306-spi overlay (#3440) - -Add an overlay for SSD1306 based OLED boards using SPI. -This will load the staging fbtft driver. - -Signed-off-by: Michael Kaplan ---- - arch/arm/boot/dts/overlays/Makefile | 1 + - arch/arm/boot/dts/overlays/README | 12 +++ - .../boot/dts/overlays/ssd1306-spi-overlay.dts | 82 +++++++++++++++++++ - 3 files changed, 95 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -168,6 +168,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - spi6-1cs.dtbo \ - spi6-2cs.dtbo \ - ssd1306.dtbo \ -+ ssd1306-spi.dtbo \ - superaudioboard.dtbo \ - sx150x.dtbo \ - tc358743.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -2428,6 +2428,18 @@ Params: address Location - https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf - - -+Name: ssd1306-spi -+Info: Overlay for SSD1306 OLED via SPI using fbtft staging driver. -+Load: dtoverlay=ssd1306-spi,= -+Params: speed SPI bus speed (default 10000000) -+ rotate Display rotation (0, 90, 180 or 270; default 0) -+ fps Delay between frame updates (default 25) -+ debug Debug output level (0-7; default 0) -+ dc_pin GPIO pin for D/C (default 24) -+ reset_pin GPIO pin for RESET (default 25) -+ height Display height (32 or 64; default 64) -+ -+ - Name: superaudioboard - Info: Configures the SuperAudioBoard sound card - Load: dtoverlay=superaudioboard,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts -@@ -0,0 +1,82 @@ -+/* -+ * Device Tree overlay for SSD1306 based SPI OLED display -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ ssd1306_pins: ssd1306_pins { -+ brcm,pins = <25 24>; -+ brcm,function = <1 1>; /* out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ssd1306: ssd1306@0{ -+ compatible = "solomon,ssd1306"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ssd1306_pins>; -+ -+ spi-max-frequency = <10000000>; -+ bgr = <0>; -+ bpp = <1>; -+ rotate = <0>; -+ fps = <25>; -+ buswidth = <8>; -+ reset-gpios = <&gpio 25 0>; -+ dc-gpios = <&gpio 24 0>; -+ debug = <0>; -+ -+ solomon,height = <64>; -+ solomon,width = <128>; -+ solomon,page-offset = <0>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&ssd1306>,"spi-max-frequency:0"; -+ rotate = <&ssd1306>,"rotate:0"; -+ fps = <&ssd1306>,"fps:0"; -+ debug = <&ssd1306>,"debug:0"; -+ dc_pin = <&ssd1306>,"dc-gpios:4>"; -+ reset_pin = <&ssd1306>,"reset-gpios:4>"; -+ height = <&ssd1306>,"solomon,height:0>"; -+ }; -+}; diff --git a/target/linux/bcm27xx/patches-4.19/950-0813-overlays-Add-sh1106-spi-and-ssd1351-spi-overlays-344.patch b/target/linux/bcm27xx/patches-4.19/950-0813-overlays-Add-sh1106-spi-and-ssd1351-spi-overlays-344.patch deleted file mode 100644 index 4dc8e0943a..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0813-overlays-Add-sh1106-spi-and-ssd1351-spi-overlays-344.patch +++ /dev/null @@ -1,248 +0,0 @@ -From 1b8ea7066ee06404e0148702bc3e85a191f6d867 Mon Sep 17 00:00:00 2001 -From: MikeDK -Date: Fri, 31 Jan 2020 12:45:43 +0100 -Subject: [PATCH] overlays: Add sh1106-spi and ssd1351-spi overlays - (#3442) - -Add overlays for SH1106 and SSD1351 based OLED displays. -SH1106 is present in many 1.3 inch OLEDs and SSD1351 is present in -1.5 inch RGB OLEDs from AliExpress. - -This will load the staging fbtft drivers. - -Signed-off-by: Michael Kaplan ---- - arch/arm/boot/dts/overlays/Makefile | 2 + - arch/arm/boot/dts/overlays/README | 23 ++++++ - .../boot/dts/overlays/sh1106-spi-overlay.dts | 82 +++++++++++++++++++ - .../boot/dts/overlays/ssd1351-spi-overlay.dts | 81 ++++++++++++++++++ - 4 files changed, 188 insertions(+) - create mode 100644 arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts - create mode 100644 arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts - ---- a/arch/arm/boot/dts/overlays/Makefile -+++ b/arch/arm/boot/dts/overlays/Makefile -@@ -145,6 +145,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - sdhost.dtbo \ - sdio.dtbo \ - sdtweak.dtbo \ -+ sh1106-spi.dtbo \ - smi.dtbo \ - smi-dev.dtbo \ - smi-nand.dtbo \ -@@ -169,6 +170,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ - spi6-2cs.dtbo \ - ssd1306.dtbo \ - ssd1306-spi.dtbo \ -+ ssd1351-spi.dtbo \ - superaudioboard.dtbo \ - sx150x.dtbo \ - tc358743.dtbo \ ---- a/arch/arm/boot/dts/overlays/README -+++ b/arch/arm/boot/dts/overlays/README -@@ -2145,6 +2145,18 @@ Params: overclock_50 Clock (i - (default on) - - -+Name: sh1106-spi -+Info: Overlay for SH1106 OLED via SPI using fbtft staging driver. -+Load: dtoverlay=sh1106-spi,= -+Params: speed SPI bus speed (default 4000000) -+ rotate Display rotation (0, 90, 180 or 270; default 0) -+ fps Delay between frame updates (default 25) -+ debug Debug output level (0-7; default 0) -+ dc_pin GPIO pin for D/C (default 24) -+ reset_pin GPIO pin for RESET (default 25) -+ height Display height (32 or 64; default 64) -+ -+ - Name: smi - Info: Enables the Secondary Memory Interface peripheral. Uses GPIOs 2-25! - Load: dtoverlay=smi -@@ -2440,6 +2452,17 @@ Params: speed SPI bus - height Display height (32 or 64; default 64) - - -+Name: ssd1351-spi -+Info: Overlay for SSD1351 OLED via SPI using fbtft staging driver. -+Load: dtoverlay=ssd1351-spi,= -+Params: speed SPI bus speed (default 4500000) -+ rotate Display rotation (0, 90, 180 or 270; default 0) -+ fps Delay between frame updates (default 25) -+ debug Debug output level (0-7; default 0) -+ dc_pin GPIO pin for D/C (default 24) -+ reset_pin GPIO pin for RESET (default 25) -+ -+ - Name: superaudioboard - Info: Configures the SuperAudioBoard sound card - Load: dtoverlay=superaudioboard,= ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts -@@ -0,0 +1,82 @@ -+/* -+ * Device Tree overlay for SH1106 based SPI OLED display -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ sh1106_pins: sh1106_pins { -+ brcm,pins = <25 24>; -+ brcm,function = <1 1>; /* out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sh1106: sh1106@0{ -+ compatible = "sinowealth,sh1106"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&sh1106_pins>; -+ -+ spi-max-frequency = <4000000>; -+ bgr = <0>; -+ bpp = <1>; -+ rotate = <0>; -+ fps = <25>; -+ buswidth = <8>; -+ reset-gpios = <&gpio 25 0>; -+ dc-gpios = <&gpio 24 0>; -+ debug = <0>; -+ -+ sinowealth,height = <64>; -+ sinowealth,width = <128>; -+ sinowealth,page-offset = <0>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&sh1106>,"spi-max-frequency:0"; -+ rotate = <&sh1106>,"rotate:0"; -+ fps = <&sh1106>,"fps:0"; -+ debug = <&sh1106>,"debug:0"; -+ dc_pin = <&sh1106>,"dc-gpios:4>"; -+ reset_pin = <&sh1106>,"reset-gpios:4>"; -+ height = <&sh1106>,"sinowealth,height:0>"; -+ }; -+}; ---- /dev/null -+++ b/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts -@@ -0,0 +1,81 @@ -+/* -+ * Device Tree overlay for SSD1351 based SPI OLED display -+ * -+ */ -+ -+/dts-v1/; -+/plugin/; -+ -+/ { -+ compatible = "brcm,bcm2835"; -+ -+ fragment@0 { -+ target = <&spi0>; -+ __overlay__ { -+ status = "okay"; -+ }; -+ }; -+ -+ fragment@1 { -+ target = <&spidev0>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@2 { -+ target = <&spidev1>; -+ __overlay__ { -+ status = "disabled"; -+ }; -+ }; -+ -+ fragment@3 { -+ target = <&gpio>; -+ __overlay__ { -+ ssd1351_pins: ssd1351_pins { -+ brcm,pins = <25 24>; -+ brcm,function = <1 1>; /* out out */ -+ }; -+ }; -+ }; -+ -+ fragment@4 { -+ target = <&spi0>; -+ __overlay__ { -+ /* needed to avoid dtc warning */ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ ssd1351: ssd1351@0{ -+ compatible = "solomon,ssd1351"; -+ reg = <0>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&ssd1351_pins>; -+ -+ spi-max-frequency = <4500000>; -+ bgr = <0>; -+ bpp = <16>; -+ rotate = <0>; -+ fps = <25>; -+ buswidth = <8>; -+ reset-gpios = <&gpio 25 0>; -+ dc-gpios = <&gpio 24 0>; -+ debug = <0>; -+ -+ solomon,height = <128>; -+ solomon,width = <128>; -+ solomon,page-offset = <0>; -+ }; -+ }; -+ }; -+ -+ __overrides__ { -+ speed = <&ssd1351>,"spi-max-frequency:0"; -+ rotate = <&ssd1351>,"rotate:0"; -+ fps = <&ssd1351>,"fps:0"; -+ debug = <&ssd1351>,"debug:0"; -+ dc_pin = <&ssd1351>,"dc-gpios:4>"; -+ reset_pin = <&ssd1351>,"reset-gpios:4>"; -+ }; -+}; diff --git a/target/linux/bcm27xx/patches-4.19/950-0813-overlays-dwc2-Increase-RX-FIFO-size.patch b/target/linux/bcm27xx/patches-4.19/950-0813-overlays-dwc2-Increase-RX-FIFO-size.patch new file mode 100644 index 0000000000..a8e7bd3c90 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0813-overlays-dwc2-Increase-RX-FIFO-size.patch @@ -0,0 +1,32 @@ +From 389107911744588cce5e06c23a058c9cfb641f33 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 4 Feb 2020 13:03:21 +0000 +Subject: [PATCH] overlays: dwc2: Increase RX FIFO size + +The previous version of the dwc2 overlay set the RX FIFO size to +256 4-byte words. This sounds large enough for a 1024 byte packet (the +largest isochronous high speed packet allowed), but it doesn't take +into account some extra space needed by the hardware. + +Minas Harutyunyan at Synopsys (the source of the DWC OTG design) +came up with a more correct value, 301, but since there is spare packet +RAM this can be increased to 558 to allow two packets per frame. + +See: https://github.com/raspberrypi/linux/issues/3447 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/dwc2-overlay.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/dwc2-overlay.dts ++++ b/arch/arm/boot/dts/overlays/dwc2-overlay.dts +@@ -12,7 +12,7 @@ + compatible = "brcm,bcm2835-usb"; + dr_mode = "otg"; + g-np-tx-fifo-size = <32>; +- g-rx-fifo-size = <256>; ++ g-rx-fifo-size = <558>; + g-tx-fifo-size = <512 512 512 512 512 256 256>; + status = "okay"; + }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0814-overlays-Fix-mcp23017-s-addr-parameter.patch b/target/linux/bcm27xx/patches-4.19/950-0814-overlays-Fix-mcp23017-s-addr-parameter.patch new file mode 100644 index 0000000000..f1750b2e2f --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0814-overlays-Fix-mcp23017-s-addr-parameter.patch @@ -0,0 +1,46 @@ +From 11ef396f6e72b22469e1c8aebf5fd50488a9431d Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 4 Feb 2020 15:22:55 +0000 +Subject: [PATCH] overlays: Fix mcp23017's addr parameter + +The addr parameter of the mcp23017 overlay was broken by the addition +of the noints parameter; splitting the mcp node in two without also +modifying the second half from the addr parameter would cause the two +halves to separate. Change the implementation strategy to patch +fragment 2 (as was originally proposed). This will prevent the +overlay from being applied at runtime until the "dtoverlay" command +is improved, but the overlay already has this restriction due to +fragment 3 so this isn't a step backwards. + +See: https://github.com/raspberrypi/linux/issues/3449 + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/mcp23017-overlay.dts | 16 +++++++--------- + 1 file changed, 7 insertions(+), 9 deletions(-) + +--- a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts ++++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts +@@ -48,15 +48,13 @@ + }; + + fragment@4 { +- target = <&i2c1>; +- __overlay__ { +- mcp23017_irq: mcp@20 { +- #interrupt-cells=<2>; +- interrupt-parent = <&gpio>; +- interrupts = <4 2>; +- interrupt-controller; +- microchip,irq-mirror; +- }; ++ target = <&mcp23017>; ++ mcp23017_irq: __overlay__ { ++ #interrupt-cells=<2>; ++ interrupt-parent = <&gpio>; ++ interrupts = <4 2>; ++ interrupt-controller; ++ microchip,irq-mirror; + }; + }; + diff --git a/target/linux/bcm27xx/patches-4.19/950-0814-overlays-dwc2-Increase-RX-FIFO-size.patch b/target/linux/bcm27xx/patches-4.19/950-0814-overlays-dwc2-Increase-RX-FIFO-size.patch deleted file mode 100644 index a8e7bd3c90..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0814-overlays-dwc2-Increase-RX-FIFO-size.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 389107911744588cce5e06c23a058c9cfb641f33 Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 4 Feb 2020 13:03:21 +0000 -Subject: [PATCH] overlays: dwc2: Increase RX FIFO size - -The previous version of the dwc2 overlay set the RX FIFO size to -256 4-byte words. This sounds large enough for a 1024 byte packet (the -largest isochronous high speed packet allowed), but it doesn't take -into account some extra space needed by the hardware. - -Minas Harutyunyan at Synopsys (the source of the DWC OTG design) -came up with a more correct value, 301, but since there is spare packet -RAM this can be increased to 558 to allow two packets per frame. - -See: https://github.com/raspberrypi/linux/issues/3447 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/dwc2-overlay.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm/boot/dts/overlays/dwc2-overlay.dts -+++ b/arch/arm/boot/dts/overlays/dwc2-overlay.dts -@@ -12,7 +12,7 @@ - compatible = "brcm,bcm2835-usb"; - dr_mode = "otg"; - g-np-tx-fifo-size = <32>; -- g-rx-fifo-size = <256>; -+ g-rx-fifo-size = <558>; - g-tx-fifo-size = <512 512 512 512 512 256 256>; - status = "okay"; - }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0815-overlays-Fix-mcp23017-s-addr-parameter.patch b/target/linux/bcm27xx/patches-4.19/950-0815-overlays-Fix-mcp23017-s-addr-parameter.patch deleted file mode 100644 index f1750b2e2f..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0815-overlays-Fix-mcp23017-s-addr-parameter.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 11ef396f6e72b22469e1c8aebf5fd50488a9431d Mon Sep 17 00:00:00 2001 -From: Phil Elwell -Date: Tue, 4 Feb 2020 15:22:55 +0000 -Subject: [PATCH] overlays: Fix mcp23017's addr parameter - -The addr parameter of the mcp23017 overlay was broken by the addition -of the noints parameter; splitting the mcp node in two without also -modifying the second half from the addr parameter would cause the two -halves to separate. Change the implementation strategy to patch -fragment 2 (as was originally proposed). This will prevent the -overlay from being applied at runtime until the "dtoverlay" command -is improved, but the overlay already has this restriction due to -fragment 3 so this isn't a step backwards. - -See: https://github.com/raspberrypi/linux/issues/3449 - -Signed-off-by: Phil Elwell ---- - arch/arm/boot/dts/overlays/mcp23017-overlay.dts | 16 +++++++--------- - 1 file changed, 7 insertions(+), 9 deletions(-) - ---- a/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -+++ b/arch/arm/boot/dts/overlays/mcp23017-overlay.dts -@@ -48,15 +48,13 @@ - }; - - fragment@4 { -- target = <&i2c1>; -- __overlay__ { -- mcp23017_irq: mcp@20 { -- #interrupt-cells=<2>; -- interrupt-parent = <&gpio>; -- interrupts = <4 2>; -- interrupt-controller; -- microchip,irq-mirror; -- }; -+ target = <&mcp23017>; -+ mcp23017_irq: __overlay__ { -+ #interrupt-cells=<2>; -+ interrupt-parent = <&gpio>; -+ interrupts = <4 2>; -+ interrupt-controller; -+ microchip,irq-mirror; - }; - }; - diff --git a/target/linux/bcm27xx/patches-4.19/950-0815-overlays-fix-sh1106-spi-ssd1306-spi-and-ssd1351-spi-.patch b/target/linux/bcm27xx/patches-4.19/950-0815-overlays-fix-sh1106-spi-ssd1306-spi-and-ssd1351-spi-.patch new file mode 100644 index 0000000000..837e7bfb17 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0815-overlays-fix-sh1106-spi-ssd1306-spi-and-ssd1351-spi-.patch @@ -0,0 +1,81 @@ +From f80af7bdb76f767a236eeb55b6ea210023180cd6 Mon Sep 17 00:00:00 2001 +From: Michael Kaplan +Date: Tue, 4 Feb 2020 16:14:48 +0100 +Subject: [PATCH] overlays: fix sh1106-spi, ssd1306-spi and ssd1351-spi overlays + +--- + .../arm/boot/dts/overlays/sh1106-spi-overlay.dts | 16 +++++++++------- + .../boot/dts/overlays/ssd1306-spi-overlay.dts | 16 +++++++++------- + .../boot/dts/overlays/ssd1351-spi-overlay.dts | 14 ++++++++------ + 3 files changed, 26 insertions(+), 20 deletions(-) + +--- a/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts +@@ -71,12 +71,14 @@ + }; + + __overrides__ { +- speed = <&sh1106>,"spi-max-frequency:0"; +- rotate = <&sh1106>,"rotate:0"; +- fps = <&sh1106>,"fps:0"; +- debug = <&sh1106>,"debug:0"; +- dc_pin = <&sh1106>,"dc-gpios:4>"; +- reset_pin = <&sh1106>,"reset-gpios:4>"; +- height = <&sh1106>,"sinowealth,height:0>"; ++ speed = <&sh1106>,"spi-max-frequency:0"; ++ rotate = <&sh1106>,"rotate:0"; ++ fps = <&sh1106>,"fps:0"; ++ debug = <&sh1106>,"debug:0"; ++ dc_pin = <&sh1106>,"dc-gpios:4", ++ <&sh1106_pins>,"brcm,pins:4; ++ reset_pin = <&sh1106>,"reset-gpios:4", ++ <&sh1106_pins>,"brcm,pins:0; ++ height = <&sh1106>,"sinowealth,height:0"; + }; + }; +--- a/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts +@@ -71,12 +71,14 @@ + }; + + __overrides__ { +- speed = <&ssd1306>,"spi-max-frequency:0"; +- rotate = <&ssd1306>,"rotate:0"; +- fps = <&ssd1306>,"fps:0"; +- debug = <&ssd1306>,"debug:0"; +- dc_pin = <&ssd1306>,"dc-gpios:4>"; +- reset_pin = <&ssd1306>,"reset-gpios:4>"; +- height = <&ssd1306>,"solomon,height:0>"; ++ speed = <&ssd1306>,"spi-max-frequency:0"; ++ rotate = <&ssd1306>,"rotate:0"; ++ fps = <&ssd1306>,"fps:0"; ++ debug = <&ssd1306>,"debug:0"; ++ dc_pin = <&ssd1306>,"dc-gpios:4"; ++ <&ssd1306_pins>,"brcm,pins:4"; ++ reset_pin = <&ssd1306>,"reset-gpios:4"; ++ <&ssd1306_pins>,"brcm,pins:0"; ++ height = <&ssd1306>,"solomon,height:0"; + }; + }; +--- a/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts +@@ -71,11 +71,13 @@ + }; + + __overrides__ { +- speed = <&ssd1351>,"spi-max-frequency:0"; +- rotate = <&ssd1351>,"rotate:0"; +- fps = <&ssd1351>,"fps:0"; +- debug = <&ssd1351>,"debug:0"; +- dc_pin = <&ssd1351>,"dc-gpios:4>"; +- reset_pin = <&ssd1351>,"reset-gpios:4>"; ++ speed = <&ssd1351>,"spi-max-frequency:0"; ++ rotate = <&ssd1351>,"rotate:0"; ++ fps = <&ssd1351>,"fps:0"; ++ debug = <&ssd1351>,"debug:0"; ++ dc_pin = <&ssd1351>,"dc-gpios:4", ++ <&ssd1351_pins>,"brcm,pins:4"; ++ reset_pin = <&ssd1351>,"reset-gpios:4"; ++ <&ssd1351_pins>,"brcm,pins:0"; + }; + }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0816-Fix-a-sh1106-spi-ssd1306-spi-ssd1351-spi-overlays.patch b/target/linux/bcm27xx/patches-4.19/950-0816-Fix-a-sh1106-spi-ssd1306-spi-ssd1351-spi-overlays.patch new file mode 100644 index 0000000000..aa472ff370 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0816-Fix-a-sh1106-spi-ssd1306-spi-ssd1351-spi-overlays.patch @@ -0,0 +1,50 @@ +From 45754db702ff044e45ba14efdcf3708151e25c5f Mon Sep 17 00:00:00 2001 +From: Jason Kim +Date: Wed, 5 Feb 2020 01:48:10 +0900 +Subject: [PATCH] Fix a sh1106-spi, ssd1306-spi, ssd1351-spi overlays + +--- + arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts | 4 ++-- + arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts | 4 ++-- + arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts | 2 +- + 3 files changed, 5 insertions(+), 5 deletions(-) + +--- a/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts +@@ -76,9 +76,9 @@ + fps = <&sh1106>,"fps:0"; + debug = <&sh1106>,"debug:0"; + dc_pin = <&sh1106>,"dc-gpios:4", +- <&sh1106_pins>,"brcm,pins:4; ++ <&sh1106_pins>,"brcm,pins:4"; + reset_pin = <&sh1106>,"reset-gpios:4", +- <&sh1106_pins>,"brcm,pins:0; ++ <&sh1106_pins>,"brcm,pins:0"; + height = <&sh1106>,"sinowealth,height:0"; + }; + }; +--- a/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts +@@ -75,9 +75,9 @@ + rotate = <&ssd1306>,"rotate:0"; + fps = <&ssd1306>,"fps:0"; + debug = <&ssd1306>,"debug:0"; +- dc_pin = <&ssd1306>,"dc-gpios:4"; ++ dc_pin = <&ssd1306>,"dc-gpios:4", + <&ssd1306_pins>,"brcm,pins:4"; +- reset_pin = <&ssd1306>,"reset-gpios:4"; ++ reset_pin = <&ssd1306>,"reset-gpios:4", + <&ssd1306_pins>,"brcm,pins:0"; + height = <&ssd1306>,"solomon,height:0"; + }; +--- a/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts ++++ b/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts +@@ -77,7 +77,7 @@ + debug = <&ssd1351>,"debug:0"; + dc_pin = <&ssd1351>,"dc-gpios:4", + <&ssd1351_pins>,"brcm,pins:4"; +- reset_pin = <&ssd1351>,"reset-gpios:4"; ++ reset_pin = <&ssd1351>,"reset-gpios:4", + <&ssd1351_pins>,"brcm,pins:0"; + }; + }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0816-overlays-fix-sh1106-spi-ssd1306-spi-and-ssd1351-spi-.patch b/target/linux/bcm27xx/patches-4.19/950-0816-overlays-fix-sh1106-spi-ssd1306-spi-and-ssd1351-spi-.patch deleted file mode 100644 index 837e7bfb17..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0816-overlays-fix-sh1106-spi-ssd1306-spi-and-ssd1351-spi-.patch +++ /dev/null @@ -1,81 +0,0 @@ -From f80af7bdb76f767a236eeb55b6ea210023180cd6 Mon Sep 17 00:00:00 2001 -From: Michael Kaplan -Date: Tue, 4 Feb 2020 16:14:48 +0100 -Subject: [PATCH] overlays: fix sh1106-spi, ssd1306-spi and ssd1351-spi overlays - ---- - .../arm/boot/dts/overlays/sh1106-spi-overlay.dts | 16 +++++++++------- - .../boot/dts/overlays/ssd1306-spi-overlay.dts | 16 +++++++++------- - .../boot/dts/overlays/ssd1351-spi-overlay.dts | 14 ++++++++------ - 3 files changed, 26 insertions(+), 20 deletions(-) - ---- a/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts -@@ -71,12 +71,14 @@ - }; - - __overrides__ { -- speed = <&sh1106>,"spi-max-frequency:0"; -- rotate = <&sh1106>,"rotate:0"; -- fps = <&sh1106>,"fps:0"; -- debug = <&sh1106>,"debug:0"; -- dc_pin = <&sh1106>,"dc-gpios:4>"; -- reset_pin = <&sh1106>,"reset-gpios:4>"; -- height = <&sh1106>,"sinowealth,height:0>"; -+ speed = <&sh1106>,"spi-max-frequency:0"; -+ rotate = <&sh1106>,"rotate:0"; -+ fps = <&sh1106>,"fps:0"; -+ debug = <&sh1106>,"debug:0"; -+ dc_pin = <&sh1106>,"dc-gpios:4", -+ <&sh1106_pins>,"brcm,pins:4; -+ reset_pin = <&sh1106>,"reset-gpios:4", -+ <&sh1106_pins>,"brcm,pins:0; -+ height = <&sh1106>,"sinowealth,height:0"; - }; - }; ---- a/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts -@@ -71,12 +71,14 @@ - }; - - __overrides__ { -- speed = <&ssd1306>,"spi-max-frequency:0"; -- rotate = <&ssd1306>,"rotate:0"; -- fps = <&ssd1306>,"fps:0"; -- debug = <&ssd1306>,"debug:0"; -- dc_pin = <&ssd1306>,"dc-gpios:4>"; -- reset_pin = <&ssd1306>,"reset-gpios:4>"; -- height = <&ssd1306>,"solomon,height:0>"; -+ speed = <&ssd1306>,"spi-max-frequency:0"; -+ rotate = <&ssd1306>,"rotate:0"; -+ fps = <&ssd1306>,"fps:0"; -+ debug = <&ssd1306>,"debug:0"; -+ dc_pin = <&ssd1306>,"dc-gpios:4"; -+ <&ssd1306_pins>,"brcm,pins:4"; -+ reset_pin = <&ssd1306>,"reset-gpios:4"; -+ <&ssd1306_pins>,"brcm,pins:0"; -+ height = <&ssd1306>,"solomon,height:0"; - }; - }; ---- a/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts -@@ -71,11 +71,13 @@ - }; - - __overrides__ { -- speed = <&ssd1351>,"spi-max-frequency:0"; -- rotate = <&ssd1351>,"rotate:0"; -- fps = <&ssd1351>,"fps:0"; -- debug = <&ssd1351>,"debug:0"; -- dc_pin = <&ssd1351>,"dc-gpios:4>"; -- reset_pin = <&ssd1351>,"reset-gpios:4>"; -+ speed = <&ssd1351>,"spi-max-frequency:0"; -+ rotate = <&ssd1351>,"rotate:0"; -+ fps = <&ssd1351>,"fps:0"; -+ debug = <&ssd1351>,"debug:0"; -+ dc_pin = <&ssd1351>,"dc-gpios:4", -+ <&ssd1351_pins>,"brcm,pins:4"; -+ reset_pin = <&ssd1351>,"reset-gpios:4"; -+ <&ssd1351_pins>,"brcm,pins:0"; - }; - }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0817-Fix-a-sh1106-spi-ssd1306-spi-ssd1351-spi-overlays.patch b/target/linux/bcm27xx/patches-4.19/950-0817-Fix-a-sh1106-spi-ssd1306-spi-ssd1351-spi-overlays.patch deleted file mode 100644 index aa472ff370..0000000000 --- a/target/linux/bcm27xx/patches-4.19/950-0817-Fix-a-sh1106-spi-ssd1306-spi-ssd1351-spi-overlays.patch +++ /dev/null @@ -1,50 +0,0 @@ -From 45754db702ff044e45ba14efdcf3708151e25c5f Mon Sep 17 00:00:00 2001 -From: Jason Kim -Date: Wed, 5 Feb 2020 01:48:10 +0900 -Subject: [PATCH] Fix a sh1106-spi, ssd1306-spi, ssd1351-spi overlays - ---- - arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts | 4 ++-- - arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts | 4 ++-- - arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts | 2 +- - 3 files changed, 5 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/sh1106-spi-overlay.dts -@@ -76,9 +76,9 @@ - fps = <&sh1106>,"fps:0"; - debug = <&sh1106>,"debug:0"; - dc_pin = <&sh1106>,"dc-gpios:4", -- <&sh1106_pins>,"brcm,pins:4; -+ <&sh1106_pins>,"brcm,pins:4"; - reset_pin = <&sh1106>,"reset-gpios:4", -- <&sh1106_pins>,"brcm,pins:0; -+ <&sh1106_pins>,"brcm,pins:0"; - height = <&sh1106>,"sinowealth,height:0"; - }; - }; ---- a/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ssd1306-spi-overlay.dts -@@ -75,9 +75,9 @@ - rotate = <&ssd1306>,"rotate:0"; - fps = <&ssd1306>,"fps:0"; - debug = <&ssd1306>,"debug:0"; -- dc_pin = <&ssd1306>,"dc-gpios:4"; -+ dc_pin = <&ssd1306>,"dc-gpios:4", - <&ssd1306_pins>,"brcm,pins:4"; -- reset_pin = <&ssd1306>,"reset-gpios:4"; -+ reset_pin = <&ssd1306>,"reset-gpios:4", - <&ssd1306_pins>,"brcm,pins:0"; - height = <&ssd1306>,"solomon,height:0"; - }; ---- a/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts -+++ b/arch/arm/boot/dts/overlays/ssd1351-spi-overlay.dts -@@ -77,7 +77,7 @@ - debug = <&ssd1351>,"debug:0"; - dc_pin = <&ssd1351>,"dc-gpios:4", - <&ssd1351_pins>,"brcm,pins:4"; -- reset_pin = <&ssd1351>,"reset-gpios:4"; -+ reset_pin = <&ssd1351>,"reset-gpios:4", - <&ssd1351_pins>,"brcm,pins:0"; - }; - }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0817-overlays-Update-upstream-overlay.patch b/target/linux/bcm27xx/patches-4.19/950-0817-overlays-Update-upstream-overlay.patch new file mode 100644 index 0000000000..0543b652ad --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0817-overlays-Update-upstream-overlay.patch @@ -0,0 +1,23 @@ +From 85c5cd3d5d6b14b3afb60bba363a6358f321ddf1 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Wed, 5 Feb 2020 09:44:54 +0000 +Subject: [PATCH] overlays: Update upstream overlay + +Changed due to the dwc2 overlay fifo size change. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/upstream-overlay.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm/boot/dts/overlays/upstream-overlay.dts ++++ b/arch/arm/boot/dts/overlays/upstream-overlay.dts +@@ -123,7 +123,7 @@ + compatible = "brcm,bcm2835-usb"; + dr_mode = "otg"; + g-np-tx-fifo-size = <32>; +- g-rx-fifo-size = <256>; ++ g-rx-fifo-size = <558>; + g-tx-fifo-size = <512 512 512 512 512 256 256>; + status = "okay"; + }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0818-overlays-add-hdmi-backlight-hwhack-gpio-overlay.patch b/target/linux/bcm27xx/patches-4.19/950-0818-overlays-add-hdmi-backlight-hwhack-gpio-overlay.patch new file mode 100644 index 0000000000..4610568b64 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0818-overlays-add-hdmi-backlight-hwhack-gpio-overlay.patch @@ -0,0 +1,106 @@ +From 24ec4e6211e88c02b925182281cb435f96dbd692 Mon Sep 17 00:00:00 2001 +From: Michael Kaplan +Date: Wed, 5 Feb 2020 10:27:23 +0100 +Subject: [PATCH] overlays: add hdmi-backlight-hwhack-gpio-overlay + +This is a Devicetree overlay for GPIO based backlight on/off capability. + +Use this if you have one of those HDMI displays whose backlight cannot be controlled via DPMS over HDMI and plan to do a little soldering to use an RPi gpio pin for on/off switching. + +See: https://www.waveshare.com/wiki/7inch_HDMI_LCD_(C)#Backlight_Control + +This was tested with a clone of the Waveshare "7 inch HDMI Touch LCD C" where I soldered two mosfets to override the backlight dip-switch. +When the overlay is loaded, a sysfs backlight node appears which can be used to modify the brightness value (0 or 1), and is even used by DPMS to switch the display backlight off after the configured timeout. +(On current Raspbian Buster Desktop, it's also possible to wakeup the display via a tap on the touch display :-) ) + +Signed-off-by: Michael Kaplan +--- + arch/arm/boot/dts/overlays/Makefile | 1 + + arch/arm/boot/dts/overlays/README | 14 ++++++ + .../hdmi-backlight-hwhack-gpio-overlay.dts | 47 +++++++++++++++++++ + 3 files changed, 62 insertions(+) + create mode 100644 arch/arm/boot/dts/overlays/hdmi-backlight-hwhack-gpio-overlay.dts + +--- a/arch/arm/boot/dts/overlays/Makefile ++++ b/arch/arm/boot/dts/overlays/Makefile +@@ -51,6 +51,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \ + gpio-poweroff.dtbo \ + gpio-shutdown.dtbo \ + hd44780-lcd.dtbo \ ++ hdmi-backlight-hwhack-gpio.dtbo \ + hifiberry-amp.dtbo \ + hifiberry-dac.dtbo \ + hifiberry-dacplus.dtbo \ +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -883,6 +883,20 @@ Params: pin_d4 GPIO pin + display_width Width of the display in characters + + ++Name: hdmi-backlight-hwhack-gpio ++Info: Devicetree overlay for GPIO based backlight on/off capability. ++ Use this if you have one of those HDMI displays whose backlight cannot ++ be controlled via DPMS over HDMI and plan to do a little soldering to ++ use an RPi gpio pin for on/off switching. See: ++ https://www.waveshare.com/wiki/7inch_HDMI_LCD_(C)#Backlight_Control ++Load: dtoverlay=hdmi-backlight-hwhack-gpio,= ++Params: gpio_pin GPIO pin used (default 17) ++ active_low Set this to 1 if the display backlight is ++ switched on when the wire goes low. ++ Leave the default (value 0) if the backlight ++ expects a high to switch it on. ++ ++ + Name: hifiberry-amp + Info: Configures the HifiBerry Amp and Amp+ audio cards + Load: dtoverlay=hifiberry-amp +--- /dev/null ++++ b/arch/arm/boot/dts/overlays/hdmi-backlight-hwhack-gpio-overlay.dts +@@ -0,0 +1,47 @@ ++/* ++ * Devicetree overlay for GPIO based backlight on/off capability. ++ * ++ * Use this if you have one of those HDMI displays whose backlight cannot be ++ * controlled via DPMS over HDMI and plan to do a little soldering to use an ++ * RPi gpio pin for on/off switching. ++ * ++ * See: https://www.waveshare.com/wiki/7inch_HDMI_LCD_(C)#Backlight_Control ++ * ++ */ ++/dts-v1/; ++/plugin/; ++ ++/ { ++ compatible = "brcm,bcm2835"; ++ ++ fragment@1 { ++ target = <&gpio>; ++ __overlay__ { ++ hdmi_backlight_hwhack_gpio_pins: hdmi_backlight_hwhack_gpio_pins { ++ brcm,pins = <17>; ++ brcm,function = <1>; /* out */ ++ }; ++ }; ++ }; ++ ++ fragment@2 { ++ target-path = "/"; ++ __overlay__ { ++ hdmi_backlight_hwhack_gpio: hdmi_backlight_hwhack_gpio { ++ compatible = "gpio-backlight"; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&hdmi_backlight_hwhack_gpio_pins>; ++ ++ gpios = <&gpio 17 0>; ++ default-on; ++ }; ++ }; ++ }; ++ ++ __overrides__ { ++ gpio_pin = <&hdmi_backlight_hwhack_gpio>,"gpios:4", ++ <&hdmi_backlight_hwhack_gpio_pins>,"brcm,pins:0"; ++ active_low = <&hdmi_backlight_hwhack_gpio>,"gpios:8"; ++ }; ++}; diff --git a/target/linux/bcm27xx/patches-4.19/950-0819-overlays-Add-timeout_ms-parameter-to-gpio-poweroff.patch b/target/linux/bcm27xx/patches-4.19/950-0819-overlays-Add-timeout_ms-parameter-to-gpio-poweroff.patch new file mode 100644 index 0000000000..313ec830c3 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0819-overlays-Add-timeout_ms-parameter-to-gpio-poweroff.patch @@ -0,0 +1,34 @@ +From 4c4cc35a921e7706b696c25ce432b23ad32cd6e5 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Fri, 7 Feb 2020 09:51:31 +0000 +Subject: [PATCH] overlays: Add timeout_ms parameter to gpio-poweroff + +The timeout_ms parameter specifies in milliseconds how long the kernel +waits for power-down before issuing a WARN. The default value is 3000 ms. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/overlays/README | 2 ++ + arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts | 1 + + 2 files changed, 3 insertions(+) + +--- a/arch/arm/boot/dts/overlays/README ++++ b/arch/arm/boot/dts/overlays/README +@@ -821,6 +821,8 @@ Params: gpiopin GPIO for + input Set if the gpio pin should be configured as + an input. + export Set to export the configured pin to sysfs ++ timeout_ms Specify (in ms) how long the kernel waits for ++ power-down before issuing a WARN (default 3000). + + + Name: gpio-shutdown +--- a/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts ++++ b/arch/arm/boot/dts/overlays/gpio-poweroff-overlay.dts +@@ -32,5 +32,6 @@ + active_low = <&power_ctrl>,"gpios:8"; + input = <&power_ctrl>,"input?"; + export = <&power_ctrl>,"export?"; ++ timeout_ms = <&power_ctrl>,"timeout-ms:0"; + }; + }; diff --git a/target/linux/bcm27xx/patches-4.19/950-0820-of-overlay-Correct-symbol-path-fixups.patch b/target/linux/bcm27xx/patches-4.19/950-0820-of-overlay-Correct-symbol-path-fixups.patch new file mode 100644 index 0000000000..34b54f18df --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0820-of-overlay-Correct-symbol-path-fixups.patch @@ -0,0 +1,37 @@ +From c580e406566b6dac7810b495632bdbac11eb88a4 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Thu, 6 Feb 2020 12:23:15 +0000 +Subject: [PATCH] of: overlay: Correct symbol path fixups + +When symbols from overlays are added to the live tree their paths must +be rebased. The translated symbol is normally the result of joining +the fragment-relative path (with a leading "/") to the target path +(either copied directly from the "target-path" property or resolved +from the phandle). This translation fails when the target is the root +node (a common case for Raspberry Pi overlays) because the resulting +path starts with a double slash. For example, if target-path is "/" and +the fragment adds a node called "newnode", the label associated with +that node will be assigned the path "//newnode", which can't be found +in the tree. + +Fix the failure case by explicitly replacing a target path of "/" with +an empty string. + +Fixes: d1651b03c2df ("of: overlay: add overlay symbols to live device tree") + +Signed-off-by: Phil Elwell +--- + drivers/of/overlay.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/of/overlay.c ++++ b/drivers/of/overlay.c +@@ -245,6 +245,8 @@ static struct property *dup_and_fixup_sy + if (!target_path) + return NULL; + target_path_len = strlen(target_path); ++ if (!strcmp(target_path, "/")) ++ target_path_len = 0; + + new_prop = kzalloc(sizeof(*new_prop), GFP_KERNEL); + if (!new_prop) diff --git a/target/linux/bcm27xx/patches-4.19/950-0821-ASoC-sgtl5000-add-ADC-mute-control.patch b/target/linux/bcm27xx/patches-4.19/950-0821-ASoC-sgtl5000-add-ADC-mute-control.patch new file mode 100644 index 0000000000..68d670c1ad --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0821-ASoC-sgtl5000-add-ADC-mute-control.patch @@ -0,0 +1,28 @@ +From 291a74051f1d5337bbfcbb0aaa17c8774ad84624 Mon Sep 17 00:00:00 2001 +From: Oleksandr Suvorov +Date: Fri, 19 Jul 2019 10:05:34 +0000 +Subject: [PATCH] ASoC: sgtl5000: add ADC mute control + +This control mute/unmute the ADC input of SGTL5000 +using its CHIP_ANA_CTRL register. + +Signed-off-by: Oleksandr Suvorov +Reviewed-by: Marcel Ziswiler +Reviewed-by: Igor Opaniuk +Reviewed-by: Fabio Estevam +Link: https://lore.kernel.org/r/20190719100524.23300-5-oleksandr.suvorov@toradex.com +Signed-off-by: Mark Brown +--- + sound/soc/codecs/sgtl5000.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/sound/soc/codecs/sgtl5000.c ++++ b/sound/soc/codecs/sgtl5000.c +@@ -712,6 +712,7 @@ static const struct snd_kcontrol_new sgt + SGTL5000_CHIP_ANA_ADC_CTRL, + 8, 1, 0, capture_6db_attenuate), + SOC_SINGLE("Capture ZC Switch", SGTL5000_CHIP_ANA_CTRL, 1, 1, 0), ++ SOC_SINGLE("Capture Switch", SGTL5000_CHIP_ANA_CTRL, 0, 1, 1), + + SOC_DOUBLE_TLV("Headphone Playback Volume", + SGTL5000_CHIP_ANA_HP_CTRL, diff --git a/target/linux/bcm27xx/patches-4.19/950-0822-ARM-dts-Remove-virtgpio-from-bcm2711-rpi-4-b.dts.patch b/target/linux/bcm27xx/patches-4.19/950-0822-ARM-dts-Remove-virtgpio-from-bcm2711-rpi-4-b.dts.patch new file mode 100644 index 0000000000..a3f9badb33 --- /dev/null +++ b/target/linux/bcm27xx/patches-4.19/950-0822-ARM-dts-Remove-virtgpio-from-bcm2711-rpi-4-b.dts.patch @@ -0,0 +1,33 @@ +From ae29bcf2ddf2b82098d003768a51d28b90ffc5b4 Mon Sep 17 00:00:00 2001 +From: Phil Elwell +Date: Tue, 25 Feb 2020 16:53:31 +0000 +Subject: [PATCH] ARM: dts: Remove virtgpio from bcm2711-rpi-4-b.dts + +Pi 4B doesn't need the virtgpio driver (it was added to reduce the +overhead of driving the ACT LED on the Pi 3B's GPIO expander), so +remove the instantiation by the Pi 4 DTS file to avoid confusion. + +Signed-off-by: Phil Elwell +--- + arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 10 ---------- + 1 file changed, 10 deletions(-) + +--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts ++++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts +@@ -34,16 +34,6 @@ + }; + }; + +-&soc { +- virtgpio: virtgpio { +- compatible = "brcm,bcm2835-virtgpio"; +- gpio-controller; +- #gpio-cells = <2>; +- firmware = <&firmware>; +- status = "okay"; +- }; +-}; +- + &mmcnr { + pinctrl-names = "default"; + pinctrl-0 = <&sdio_pins>; -- cgit v1.2.3