From 5b6a80909280cafcb1e28ca120eed6922d68dc5a Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Sun, 22 Sep 2019 11:57:13 +0200 Subject: treewide: move calibration data extraction function to library This moves the almost identical calibration data extraction functions present multiple times in several targets to a single library file /lib/functions/caldata.sh. Functions are renamed with more generic names to merge different variants that only differ in their names. Most of the targets used find_mtd_chardev, while some used find_mtd_part inside the extraction code. To merge them, the more abundant version with find_mtd_chardev is used in the common code. Signed-off-by: Adrian Schmutzler [rebase on latest master; add mpc85xx] Signed-off-by: David Bauer --- .../etc/hotplug.d/firmware/10-ath9k-eeprom | 90 +++++++--------------- .../etc/hotplug.d/firmware/11-ath10k-caldata | 86 +++++++-------------- 2 files changed, 54 insertions(+), 122 deletions(-) (limited to 'target/linux/ath79/base-files/etc') diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 0cdd783315..5ec13efd3f 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -2,45 +2,7 @@ [ -e /lib/firmware/$FIRMWARE ] && exit 0 -. /lib/functions.sh -. /lib/functions/system.sh - -ath9k_eeprom_die() { - echo "ath9k eeprom: " "$*" - exit 1 -} - -ath9k_eeprom_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath9k_eeprom_die "no mtd device found for partition $part" - - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath9k_eeprom_die "failed to extract from $mtd" -} - -ath9k_eeprom_extract_reverse() { - local part=$1 - local offset=$2 - local count=$(($3)) - local mtd - local reversed - local caldata - - mtd=$(find_mtd_chardev "$part") - reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd) - - for byte in $reversed; do - caldata="\x${byte}${caldata}" - done - - printf "%b" "$caldata" > /lib/firmware/$FIRMWARE -} +. /lib/functions/caldata.sh ath9k_patch_fw_mac() { local mac=$1 @@ -83,11 +45,11 @@ case "$FIRMWARE" in "ath9k-eeprom-ahb-18100000.wmac.bin") case $board in avm,fritz4020) - ath9k_eeprom_extract_reverse "urlader" 0x1541 0x440 + caldata_extract_reverse "urlader" 0x1541 0x440 ;; dlink,dir-825-c1|\ dlink,dir-835-a1) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_text "mac" 0x4) 0x2 ;; dlink,dir-842-c1|\ @@ -96,11 +58,11 @@ case "$FIRMWARE" in dlink,dir-859-a1|\ nec,wg1200cr|\ wd,mynet-n750) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2 ;; engenius,ecb1750) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env "athaddr") +1) 0x2 ;; engenius,epg5000|\ @@ -108,39 +70,39 @@ case "$FIRMWARE" in iodata,wn-ac1600dgr|\ iodata,wn-ac1600dgr2|\ iodata,wn-ag300dgr) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_ascii u-boot-env ethaddr) 0x2 ;; nec,wg800hp) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_text board_data 0x680) 0x2 ;; qihoo,c301) - ath9k_eeprom_extract "radiocfg" 0x1000 0x440 + caldata_extract "radiocfg" 0x1000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan24mac") 0x2 ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; "ath9k-eeprom-pci-0000:00:00.0.bin") case $board in avm,fritz300e) - ath9k_eeprom_extract_reverse "urloader" 0x1541 0x440 + caldata_extract_reverse "urloader" 0x1541 0x440 ;; buffalo,whr-g301n|\ buffalo,wzr-hp-g302h-a1a0|\ tplink,tl-wr841-v5|\ tplink,tl-wr941-v4) - ath9k_eeprom_extract "art" 0x1000 0xeb8 + caldata_extract "art" 0x1000 0xeb8 ;; buffalo,wzr-hp-g450h) - ath9k_eeprom_extract "art" 0x1000 0x440 + caldata_extract "art" 0x1000 0x440 ;; dlink,dir-825-c1|\ dlink,dir-835-a1) - ath9k_eeprom_extract "art" 0x5000 0x440 + caldata_extract "art" 0x5000 0x440 ath9k_patch_fw_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) 0x2 ;; ocedo,raccoon|\ @@ -149,7 +111,7 @@ case "$FIRMWARE" in tplink,tl-wdr4300-v1|\ tplink,tl-wdr4900-v2|\ winchannel,wb2000) - ath9k_eeprom_extract "art" 0x5000 0x440 + caldata_extract "art" 0x5000 0x440 ;; netgear,wnr612-v2|\ on,n150r|\ @@ -167,24 +129,24 @@ case "$FIRMWARE" in ubnt,bullet-m|\ ubnt,nano-m|\ ubnt,rocket-m) - ath9k_eeprom_extract "art" 0x1000 0x1000 + caldata_extract "art" 0x1000 0x1000 ;; pqi,air-pen) - ath9k_eeprom_extract "art" 0x1000 0x7d2 + caldata_extract "art" 0x1000 0x7d2 ;; ubnt,unifi) - ath9k_eeprom_extract "art" 0x1000 0x800 + caldata_extract "art" 0x1000 0x800 ;; wd,mynet-n750) - ath9k_eeprom_extract "art" 0x5000 0x440 + caldata_extract "art" 0x5000 0x440 ath9k_patch_fw_mac $(mtd_get_mac_ascii devdata "wlan5mac") 0x2 ;; wd,mynet-wifi-rangeextender) - ath9k_eeprom_extract "art" 0x1000 0x1000 + caldata_extract "art" 0x1000 0x1000 ath9k_patch_fw_mac $(nvram get wl0_hwaddr) "$mac" 0x2 ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; @@ -195,14 +157,14 @@ case "$FIRMWARE" in netgear,wndr3700v2|\ netgear,wndr3800|\ netgear,wndr3800ch) - ath9k_eeprom_extract "art" 0x1000 0xeb8 + caldata_extract "art" 0x1000 0xeb8 ;; dlink,dir-825-b1) - ath9k_eeprom_extract "caldata" 0x1000 0xeb8 + caldata_extract "caldata" 0x1000 0xeb8 ath9k_patch_fw_mac_crc $(mtd_get_mac_text "caldata" 0xffa0) 0x20c ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; @@ -213,14 +175,14 @@ case "$FIRMWARE" in netgear,wndr3700v2|\ netgear,wndr3800|\ netgear,wndr3800ch) - ath9k_eeprom_extract "art" 0x5000 0xeb8 + caldata_extract "art" 0x5000 0xeb8 ;; dlink,dir-825-b1) - ath9k_eeprom_extract "caldata" 0x5000 0xeb8 + caldata_extract "caldata" 0x5000 0xeb8 ath9k_patch_fw_mac_crc $(macaddr_add $(mtd_get_mac_text "caldata" 0xffb4) 1) 0x20c ;; *) - ath9k_eeprom_die "board $board is not supported yet" + caldata_die "board $board is not supported yet" ;; esac ;; diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 3844481f5a..878f6443ab 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -1,35 +1,9 @@ #!/bin/sh -. /lib/functions.sh -. /lib/functions/k2t.sh - -ath10kcal_die() { - echo "ath10cal: " "$*" - exit 1 -} - -ath10kcal_from_file() { - local source=$1 - local offset=$(($2)) - local count=$(($3)) - - dd if=$source of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $source" -} - -ath10kcal_extract() { - local part=$1 - local offset=$(($2)) - local count=$(($3)) - local mtd - - mtd=$(find_mtd_chardev $part) - [ -n "$mtd" ] || \ - ath10kcal_die "no mtd device found for partition $part" +[ -e /lib/firmware/$FIRMWARE ] && exit 0 - dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \ - ath10kcal_die "failed to extract calibration data from $mtd" -} +. /lib/functions/caldata.sh +. /lib/functions/k2t.sh ath10kcal_patch_mac() { local mac=$1 @@ -62,10 +36,6 @@ ath10kcal_patch_mac_crc() { } } -[ -e /lib/firmware/$FIRMWARE ] && exit 0 - -. /lib/functions/system.sh - board=$(board_name) case "$FIRMWARE" in @@ -74,7 +44,7 @@ case "$FIRMWARE" in comfast,cf-wr650ac-v1|\ comfast,cf-wr650ac-v2|\ yuncore,a770) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ;; devolo,dvl1200e|\ devolo,dvl1200i|\ @@ -82,54 +52,54 @@ case "$FIRMWARE" in devolo,dvl1750e|\ devolo,dvl1750i|\ devolo,dvl1750x) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0x0) -1) ;; dlink,dir-859-a1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac") ;; elecom,wrc-1750ghbk2-i) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ;; engenius,ecb1750) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_ascii u-boot-env athaddr) ;; engenius,epg5000|\ iodata,wn-ac1167dgr|\ iodata,wn-ac1600dgr2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +1) ;; engenius,ews511ap) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; glinet,gl-ar750|\ glinet,gl-ar750s) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +1) ;; glinet,gl-x750) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary art 0x0) +2) ;; nec,wg800hp) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_text board_data 0x880) ;; ocedo,koala|\ ocedo,ursus) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(mtd_get_mac_binary art 0xc) ;; openmesh,om5p-ac-v2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; qihoo,c301) - ath10kcal_extract "radiocfg" 0x5000 0x844 + caldata_extract "radiocfg" 0x5000 0x844 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ;; tplink,archer-a7-v5|\ @@ -137,29 +107,29 @@ case "$FIRMWARE" in tplink,archer-c7-v4|\ tplink,archer-c7-v5|\ tplink,archer-c25-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) -1) ;; tplink,archer-c5-v1|\ tplink,archer-c7-v2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary u-boot 0x1fc00) -1) ;; tplink,archer-d50-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary romfile 0xf100) +2) ;; tplink,re350k-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary config 0x10008) +2) ;; tplink,re355-v1|\ tplink,re450-v1) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2) ;; tplink,re450-v2) - ath10kcal_extract "art" 0x5000 0x844 + caldata_extract "art" 0x5000 0x844 ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) +1) ;; ubnt,unifiac-lite|\ @@ -170,14 +140,14 @@ case "$FIRMWARE" in ubnt,nanostation-ac|\ ubnt,nanostation-ac-loco|\ ubnt,unifiac-pro) - ath10kcal_extract "EEPROM" 0x5000 0x844 + caldata_extract "EEPROM" 0x5000 0x844 ;; esac ;; "ath10k/pre-cal-pci-0000:00:00.0.bin") case $board in comfast,cf-e313ac) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_binary art 0x6) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin @@ -187,18 +157,18 @@ case "$FIRMWARE" in dlink,dir-842-c2|\ dlink,dir-842-c3|\ nec,wg1200cr) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin ;; netgear,ex6400|\ netgear,ex7300) - ath10kcal_extract "caldata" 0x5000 0x2f20 + caldata_extract "caldata" 0x5000 0x2f20 ath10kcal_patch_mac $(mtd_get_mac_binary caldata 0xc) ;; phicomm,k2t) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(k2t_get_mac "5g_mac") ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin @@ -209,7 +179,7 @@ case "$FIRMWARE" in tplink,archer-c60-v1|\ tplink,archer-c60-v2|\ tplink,archer-c6-v2) - ath10kcal_extract "art" 0x5000 0x2f20 + caldata_extract "art" 0x5000 0x2f20 ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary mac 0x8) -1) ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin -- cgit v1.2.3