From b23b0fb28b760ce66a8f93d4681c8bd300d75d30 Mon Sep 17 00:00:00 2001 From: Paul Wassi Date: Fri, 10 Nov 2017 22:18:09 +0100 Subject: ar71xx: add support for TP-Link TL-WR810N v2 TP-Link TL-WR810N v2 is a compact Wi-Fi router with two Ethernet ports. Specification: - QCA9533 (650 MHz) - 32 MB RAM - 8 MB Flash - 300 Mbps Wi-Fi 2.4 GHz - 2x 10/100 Mbps Ethernet (eth0, eth1) - UART on testpads on PCB - 1x LED (GPIO-controlled) - 1x reset/WPS button - 1x slide-switch with 2 GPIO inputs Flash instructions: - Flash as regular firmware update in Web UI - Default: 192.168.0.254 / admin / admin - Select *-factory.bin When holding reset button during power-up, U-Boot requests a file 'wr810nv1_tp_recovery.bin' from TFTP server at 192.168.0.66 Signed-off-by: Paul Wassi --- .../ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c | 40 +++++++++++++++------- 1 file changed, 27 insertions(+), 13 deletions(-) (limited to 'target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c') diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c index 906c5f8d4d..588bb9d861 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr810n.c @@ -88,27 +88,20 @@ static struct gpio_keys_button tl_wr810n_gpio_keys[] __initdata = { }, }; -static void __init tl_wr810n_setup(void) +static void __init tl_ap143_setup(int lan_mac_offset) { u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); - ath79_setup_ar933x_phy4_switch(false, false); - ath79_register_m25p80(&tl_wr810n_flash_data); - ath79_register_leds_gpio(-1, - ARRAY_SIZE(tl_wr810n_leds_gpio), - tl_wr810n_leds_gpio); - ath79_register_gpio_keys_polled(-1, - TL_WR810N_KEYS_POLL_INTERVAL, - ARRAY_SIZE(tl_wr810n_gpio_keys), - tl_wr810n_gpio_keys); + + ath79_setup_ar933x_phy4_switch(false, false); ath79_register_mdio(0, 0x0); /* WAN */ - ath79_eth0_data.duplex = DUPLEX_FULL; ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.duplex = DUPLEX_FULL; ath79_eth0_data.speed = SPEED_100; ath79_eth0_data.phy_mask = BIT(4); ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1); @@ -116,20 +109,41 @@ static void __init tl_wr810n_setup(void) /* LAN */ ath79_switch_data.phy4_mii_en = 1; - ath79_eth1_data.duplex = DUPLEX_FULL; ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.duplex = DUPLEX_FULL; ath79_eth1_data.speed = SPEED_1000; ath79_switch_data.phy_poll_mask |= BIT(4); - ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, lan_mac_offset); ath79_register_eth(1); ath79_register_wmac(art + TL_WR810N_WMAC_CALDATA_OFFSET, mac); + ath79_register_leds_gpio(-1, + ARRAY_SIZE(tl_wr810n_leds_gpio), + tl_wr810n_leds_gpio); + ath79_register_gpio_keys_polled(-1, + TL_WR810N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr810n_gpio_keys), + tl_wr810n_gpio_keys); +} + +static void __init tl_wr810n_setup(void) +{ + tl_ap143_setup(-1); + gpio_request_one(TL_WR810N_GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, "USB power"); ath79_register_usb(); } +static void __init tl_wr810n_v2_setup(void) +{ + tl_ap143_setup(0); +} + MIPS_MACHINE(ATH79_MACH_TL_WR810N, "TL-WR810N", "TP-LINK TL-WR810N", tl_wr810n_setup); + +MIPS_MACHINE(ATH79_MACH_TL_WR810N_V2, "TL-WR810N-v2", "TP-LINK TL-WR810N v2", + tl_wr810n_v2_setup); -- cgit v1.2.3