From 8c64824576598117958691853de68bf4dcfc3c06 Mon Sep 17 00:00:00 2001 From: Piotr Dymacz Date: Thu, 15 Feb 2018 23:15:53 +0100 Subject: ar71xx: add support for GainStrong Oolite V5.2 GainStrong Oolite V5.2 is a small (39.5 x 78 mm), dual-band system on module, based on Qualcomm QCA9531 + QCA9887. All QCA9531 SOC GPIOs are available on castellated pins. Specification: - 650/400/200 MHz (CPU/DDR/AHB) - 64/128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 5x 10/100 Mbps Ethernet (all ports available on castellated pins) - 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA - 1T1R 5 GHz (QCA9887) with ext. FEM (SKY85710-11) - 3x U.FL - 1x USB 2.0 The dedicated development board includes 5 FE ports, USB 2.0 port, two buttons (one directly connected to SOC reset input), header with all GPIOs and several LEDs. Flash instruction: Vendor firmware is based on OpenWrt. LuCI or sysupgrade can be used to flash OpenWrt firmware. Signed-off-by: Piotr Dymacz --- target/linux/ar71xx/config-4.4 | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ar71xx/config-4.4') diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index d49cebf812..c55bdab0e8 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -124,6 +124,7 @@ CONFIG_ATH79=y # CONFIG_ATH79_MACH_GL_MIFI is not set # CONFIG_ATH79_MACH_GL_USB150 is not set # CONFIG_ATH79_MACH_GS_OOLITE_V1 is not set +# CONFIG_ATH79_MACH_GS_OOLITE_V5_2 is not set # CONFIG_ATH79_MACH_HIVEAP_121 is not set # CONFIG_ATH79_MACH_HIWIFI_HC6361 is not set # CONFIG_ATH79_MACH_HORNET_UB is not set -- cgit v1.2.3