From 5ac974f2145c770431a6eb7e006dd086b70224b1 Mon Sep 17 00:00:00 2001 From: Xavier Douville Date: Thu, 21 Mar 2019 09:21:34 -0400 Subject: ar71xx: Add support for Mikrotik RB SXT 2nD r3 The Mikrotik RouterBOARD SXT 2nD r3 is an outdoor WiFi AP / CPE with a single 2.4 GHz radio and a 100 Mbps Ethernet port. The device similar to the SXT 2nD r2, but it has SPI NOR flash instead of NAND flash. Hardware -------- CPU: Atheros AR9344 (600 MHz) RAM: 64 MiB FLASH: 16 MiB SPI NOR W25Q128 ETH: 1x 100 Mbps Atheros AG71xx WiFi: 2T2R 802.11b/g/n (ath9k) Power: Passive PoE 8-30 V Installation instructions: 1. Boot openwrt-ar71xx-mikrotik-vmlinux-initramfs.elf using a DHCP+TFTP server. 2. Erase the "firmware" partition using the mtd command. This should no longer be required once this patch is merged. 3. Use sysupgrade to install to flash. The file openwrt-ar71xx-mikrotik-rb-nor-flash-16M-squashfs-sysupgrade.bin should be used. Signed-off-by: Xavier Douville --- target/linux/ar71xx/base-files/etc/board.d/02_network | 1 + target/linux/ar71xx/base-files/etc/diag.sh | 1 + 2 files changed, 2 insertions(+) (limited to 'target/linux/ar71xx/base-files/etc') diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 13dfd2b000..0588e1b3c1 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -110,6 +110,7 @@ ar71xx_setup_interfaces() rb-lhg-5nd|\ rb-mapl-2nd|\ rb-sxt2n|\ + rb-sxt-2nd-r3|\ rb-sxt5n|\ rb-wap-2nd|\ rb-wapr-2nd|\ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 3c9f17d8c3..55654263af 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -381,6 +381,7 @@ get_status_led() { rb-lhg-5nd|\ rb-map-2nd|\ rb-mapl-2nd|\ + rb-sxt-2nd-r3|\ rb-wap-2nd|\ rb-wapr-2nd) status_led="rb:green:user" -- cgit v1.2.3