From b23b0fb28b760ce66a8f93d4681c8bd300d75d30 Mon Sep 17 00:00:00 2001 From: Paul Wassi Date: Fri, 10 Nov 2017 22:18:09 +0100 Subject: ar71xx: add support for TP-Link TL-WR810N v2 TP-Link TL-WR810N v2 is a compact Wi-Fi router with two Ethernet ports. Specification: - QCA9533 (650 MHz) - 32 MB RAM - 8 MB Flash - 300 Mbps Wi-Fi 2.4 GHz - 2x 10/100 Mbps Ethernet (eth0, eth1) - UART on testpads on PCB - 1x LED (GPIO-controlled) - 1x reset/WPS button - 1x slide-switch with 2 GPIO inputs Flash instructions: - Flash as regular firmware update in Web UI - Default: 192.168.0.254 / admin / admin - Select *-factory.bin When holding reset button during power-up, U-Boot requests a file 'wr810nv1_tp_recovery.bin' from TFTP server at 192.168.0.66 Signed-off-by: Paul Wassi --- target/linux/ar71xx/base-files/etc/diag.sh | 1 + 1 file changed, 1 insertion(+) (limited to 'target/linux/ar71xx/base-files/etc/diag.sh') diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 42edd0233b..e767eec520 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -423,6 +423,7 @@ get_status_led() { tl-wr720n-v3|\ tl-wr802n-v1|\ tl-wr810n|\ + tl-wr810n-v2|\ tl-wr940n-v4|\ tl-wr941nd-v6) status_led="tp-link:blue:system" -- cgit v1.2.3