From b27b8b5bddd14308103362eb3def25e22c04660d Mon Sep 17 00:00:00 2001 From: Imre Kaloz Date: Thu, 31 Oct 2013 10:57:46 +0000 Subject: use a single package to build MLO/u-boot for all omap boards Signed-off-by: Imre Kaloz SVN-Revision: 38626 --- package/boot/uboot-omap/Makefile | 100 +++++++ package/boot/uboot-omap35xx/Makefile | 91 ------ .../files/include/configs/omap3_overo.h | 316 --------------------- package/boot/uboot-omap4/Makefile | 92 ------ 4 files changed, 100 insertions(+), 499 deletions(-) create mode 100644 package/boot/uboot-omap/Makefile delete mode 100644 package/boot/uboot-omap35xx/Makefile delete mode 100644 package/boot/uboot-omap35xx/files/include/configs/omap3_overo.h delete mode 100644 package/boot/uboot-omap4/Makefile (limited to 'package') diff --git a/package/boot/uboot-omap/Makefile b/package/boot/uboot-omap/Makefile new file mode 100644 index 0000000000..356be5183e --- /dev/null +++ b/package/boot/uboot-omap/Makefile @@ -0,0 +1,100 @@ +# +# Copyright (C) 2012 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +include $(TOPDIR)/rules.mk + +PKG_NAME:=u-boot +PKG_VERSION:=2013.10 +PKG_RELEASE:=1 + +PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 +PKG_SOURCE_URL:= \ + http://mirror2.openwrt.org/sources \ + ftp://ftp.denx.de/pub/u-boot +PKG_MD5SUM:=a076a044b64371edc52f7e562b13f6b2 +PKG_TARGETS:=bin + +include $(INCLUDE_DIR)/package.mk + +define uboot/Default + TITLE:= + CONFIG:= + IMAGE:= +endef + +define uboot/omap4_panda + TITLE:=U-Boot for the Pandaboard +endef + +define uboot/am335x_evm + TITLE:=U-Boot for the AM335x EVM +endef + +define uboot/omap3_overo + TITLE:=U-Boot for the Gumstix Overo +endef + +define uboot/omap3_beagle + TITLE:=U-Boot for the BeagleBoard +endef + +UBOOTS:=omap4_panda am335x_evm omap3_overo omap3_beagle + +define Package/uboot/template +define Package/uboot-omap4-$(1) + SECTION:=boot + CATEGORY:=Boot Loaders + DEPENDS:=@TARGET_omap4 + TITLE:=$(2) + URL:=http://www.denx.de/wiki/U-Boot + VARIANT:=$(1) +endef +endef + +define BuildUBootPackage + $(eval $(uboot/Default)) + $(eval $(uboot/$(1))) + $(call Package/uboot/template,$(1),$(TITLE)) +endef + +ifdef BUILD_VARIANT +$(eval $(call uboot/$(BUILD_VARIANT))) +UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT)) +UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.img) +endif + +define Build/Configure + $(MAKE) -C $(PKG_BUILD_DIR) \ + $(UBOOT_CONFIG)_config +endef + +define Build/Compile + $(MAKE) -C $(PKG_BUILD_DIR) \ + CROSS_COMPILE=$(TARGET_CROSS) +endef + +define Package/uboot/install/default + $(INSTALL_DIR) $(BIN_DIR)/uboot-$(BOARD)-$(1) + $(CP) $(PKG_BUILD_DIR)/u-boot.img $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-u-boot.img + $(CP) $(PKG_BUILD_DIR)/MLO $(BIN_DIR)/uboot-$(BOARD)-$(1)/openwrt-$(BOARD)-$(1)-MLO +endef + +define Package/uboot/install/template +define Package/uboot-omap4-$(1)/install + $(call Package/uboot/install/default,$(2)) +endef +endef + +$(foreach u,$(UBOOTS), \ + $(eval $(call Package/uboot/install/template,$(u),$(u))) \ +) + +$(foreach u,$(UBOOTS), \ + $(eval $(call BuildUBootPackage,$(u))) \ + $(eval $(call BuildPackage,uboot-omap4-$(u))) \ +) diff --git a/package/boot/uboot-omap35xx/Makefile b/package/boot/uboot-omap35xx/Makefile deleted file mode 100644 index bb8a951537..0000000000 --- a/package/boot/uboot-omap35xx/Makefile +++ /dev/null @@ -1,91 +0,0 @@ -# -# Copyright (C) 2011 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/kernel.mk - -PKG_NAME:=u-boot -PKG_VERSION:=2010.12 -PKG_RELEASE:=1 - -PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) -PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 -PKG_SOURCE_URL:= \ - http://mirror2.openwrt.org/sources \ - ftp://ftp.denx.de/pub/u-boot -PKG_MD5SUM:= -PKG_TARGETS:=bin - -include $(INCLUDE_DIR)/package.mk - -define uboot/Default - TITLE:= - CONFIG:= - IMAGE:= -endef - -define uboot/omap3_overo - TITLE:=U-boot for the gumstix board -endef - -UBOOTS:=omap3_overo - -define Package/uboot/template -define Package/uboot-omap35xx-$(1) - SECTION:=boot - CATEGORY:=Boot Loaders - DEPENDS:=@TARGET_omap35xx - TITLE:=$(2) - URL:=http://www.denx.de/wiki/U-Boot - VARIANT:=$(1) -endef -endef - -define BuildUbootPackage - $(eval $(uboot/Default)) - $(eval $(uboot/$(1))) - $(call Package/uboot/template,$(1),$(TITLE)) -endef - - -ifdef BUILD_VARIANT -$(eval $(call uboot/$(BUILD_VARIANT))) -UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT)) -UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin) -endif - -define Build/Prepare - $(call Build/Prepare/Default) - $(CP) ./files/* $(PKG_BUILD_DIR) - find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf -endef - -define Build/Configure - $(MAKE) -C $(PKG_BUILD_DIR) \ - $(UBOOT_CONFIG)_config -endef - -define Build/Compile - $(MAKE) -C $(PKG_BUILD_DIR) \ - CROSS_COMPILE=$(TARGET_CROSS) -endef - -define Package/uboot/install/template -define Package/uboot-omap35xx-$(1)/install - $(INSTALL_DIR) $$(1) - $(CP) $(PKG_BUILD_DIR)/u-boot.bin $(BIN_DIR)/$(2) -endef -endef - -$(foreach u,$(UBOOTS), \ - $(eval $(call Package/uboot/install/template,$(u),openwrt-$(BOARD)-$(u)-u-boot.bin)) \ -) - -$(foreach u,$(UBOOTS), \ - $(eval $(call BuildUbootPackage,$(u))) \ - $(eval $(call BuildPackage,uboot-omap35xx-$(u))) \ -) diff --git a/package/boot/uboot-omap35xx/files/include/configs/omap3_overo.h b/package/boot/uboot-omap35xx/files/include/configs/omap3_overo.h deleted file mode 100644 index e1c930df5d..0000000000 --- a/package/boot/uboot-omap35xx/files/include/configs/omap3_overo.h +++ /dev/null @@ -1,316 +0,0 @@ -/* - * Configuration settings for the Gumstix Overo board. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */ -#define CONFIG_OMAP 1 /* in a TI OMAP core */ -#define CONFIG_OMAP34XX 1 /* which is a 34XX */ -#define CONFIG_OMAP3430 1 /* which is in a 3430 */ -#define CONFIG_OMAP3_OVERO 1 /* working with overo */ - -#define CONFIG_SDRC /* The chip has SDRC controller */ - -#include /* get chip and board defs */ -#include - -/* - * Display CPU and Board information - */ -#define CONFIG_DISPLAY_CPUINFO 1 -#define CONFIG_DISPLAY_BOARDINFO 1 - -/* Clock Defines */ -#define V_OSCK 26000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK >> 1) - -#undef CONFIG_USE_IRQ /* no support for IRQs */ -#define CONFIG_MISC_INIT_R - -#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 -#define CONFIG_REVISION_TAG 1 - -/* - * Size of malloc() pool - */ -#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ - /* Sector */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10)) - /* initial data */ - -/* - * Hardware drivers - */ - -/* - * NS16550 Configuration - */ -#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */ - -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK - -/* - * select serial console configuration - */ -#define CONFIG_CONS_INDEX 3 -#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3 -#define CONFIG_SERIAL3 3 - -/* allow to overwrite serial and ethaddr */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, \ - 115200} -#define CONFIG_GENERIC_MMC 1 -#define CONFIG_MMC 1 -#define CONFIG_OMAP_HSMMC 1 -#define CONFIG_DOS_PARTITION 1 - -/* DDR - I use Micron DDR */ -#define CONFIG_OMAP3_MICRON_DDR 1 - -/* commands to include */ -#include - -#define CONFIG_CMD_CACHE -#define CONFIG_CMD_EXT2 /* EXT2 Support */ -#define CONFIG_CMD_FAT /* FAT support */ -#define CONFIG_CMD_JFFS2 /* JFFS2 Support */ - -#define CONFIG_CMD_I2C /* I2C serial bus support */ -#define CONFIG_CMD_MMC /* MMC support */ -#define CONFIG_CMD_NAND /* NAND support */ - -#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */ -#undef CONFIG_CMD_FPGA /* FPGA configuration Support */ -#undef CONFIG_CMD_IMI /* iminfo */ -#undef CONFIG_CMD_IMLS /* List all found images */ -#undef CONFIG_CMD_NFS /* NFS support */ -#define CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */ - -#define CONFIG_SYS_NO_FLASH -#define CONFIG_HARD_I2C 1 -#define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_SLAVE 1 -#define CONFIG_SYS_I2C_BUS 0 -#define CONFIG_SYS_I2C_BUS_SELECT 1 -#define CONFIG_I2C_MULTI_BUS 1 -#define CONFIG_DRIVER_OMAP34XX_I2C 1 - -/* - * TWL4030 - */ -#define CONFIG_TWL4030_POWER 1 -#define CONFIG_TWL4030_LED 1 - -/* - * Board NAND Info. - */ -#define CONFIG_SYS_NAND_QUIET_TEST 1 -#define CONFIG_NAND_OMAP_GPMC -#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */ - /* to access nand */ -#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */ - /* to access nand */ - /* at CS0 */ -#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ - /* devices */ -#define CONFIG_JFFS2_NAND -/* nand device jffs2 lives on */ -#define CONFIG_JFFS2_DEV "nand0" -/* start of jffs2 partition */ -#define CONFIG_JFFS2_PART_OFFSET 0x680000 -#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */ - /* partition */ - -/* Environment information */ -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "loadaddr=0x82000000\0" \ - "console=ttyO2,115200n8\0" \ - "mpurate=500\0" \ - "vram=12M\0" \ - "dvimode=1024x768MR-16@60\0" \ - "defaultdisplay=dvi\0" \ - "mmcdev=0\0" \ - "mmcroot=/dev/mmcblk0p2 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ - "nandroot='ubi0:rootfs ubi.mtd=5 ubi.mtd=6 ubi.mtd=7'\0" \ - "nandrootfstype=ubifs\0" \ - "mmcargs=setenv bootargs console=${console} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapfb.debug=y " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ - "nandargs=setenv bootargs console=${console} " \ - "mpurate=${mpurate} " \ - "vram=${vram} " \ - "omapfb.mode=dvi:${dvimode} " \ - "omapfb.debug=y " \ - "omapdss.def_disp=${defaultdisplay} " \ - "root=${nandroot} " \ - "rootfstype=${nandrootfstype}\0" \ - "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source ${loadaddr}\0" \ - "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm ${loadaddr}\0" \ - "nandboot=echo Booting from nand ...; " \ - "run nandargs; " \ - "nand read ${loadaddr} 280000 200000; " \ - "bootm ${loadaddr}\0" \ - -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan ${mmcdev}; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run nandboot; " \ - "fi; " \ - "fi; " \ - "else run nandboot; fi" - -#define CONFIG_AUTO_COMPLETE 1 -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ -#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_SYS_PROMPT "Overo # " -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_MAXARGS 16 /* max number of command */ - /* args */ -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* memtest works on */ -#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) -#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \ - 0x01F00000) /* 31MB */ - -#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */ - /* address */ -/* - * OMAP3 has 12 GP timers, they can be driven by the system clock - * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK). - * This rate is divided by a local divisor. - */ -#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2 -#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ -#define CONFIG_SYS_HZ 1000 - -/*----------------------------------------------------------------------- - * Stack sizes - * - * The stack sizes are set up in start.S using the settings below - */ -#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */ -#ifdef CONFIG_USE_IRQ -#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */ -#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */ -#endif - -/*----------------------------------------------------------------------- - * Physical Memory Map - */ -#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ -#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ -#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 - -/* SDRAM Bank Allocation method */ -#define SDRC_R_B_C 1 - -/*----------------------------------------------------------------------- - * FLASH and environment organization - */ - -/* **** PISMO SUPPORT *** */ - -/* Configure the PISMO */ -#define PISMO1_NAND_SIZE GPMC_SIZE_128M -#define PISMO1_ONEN_SIZE GPMC_SIZE_128M - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */ - -#define CONFIG_SYS_FLASH_BASE boot_flash_base - -/* Monitor at start of flash */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP - -#define CONFIG_ENV_IS_IN_NAND 1 -#define ONENAND_ENV_OFFSET 0x240000 /* environment starts here */ -#define SMNAND_ENV_OFFSET 0x240000 /* environment starts here */ - -#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec -#define CONFIG_ENV_OFFSET boot_flash_off -#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET - -#ifndef __ASSEMBLY__ -extern unsigned int boot_flash_base; -extern volatile unsigned int boot_flash_env_addr; -extern unsigned int boot_flash_off; -extern unsigned int boot_flash_sec; -extern unsigned int boot_flash_type; -#endif - -#if defined(CONFIG_CMD_NET) -/*---------------------------------------------------------------------------- - * SMSC9211 Ethernet from SMSC9118 family - *---------------------------------------------------------------------------- - */ - -#define CONFIG_NET_MULTI -#define CONFIG_SMC911X 1 -#define CONFIG_SMC911X_32_BIT -#define CONFIG_SMC911X_BASE 0x2C000000 - -#endif /* (CONFIG_CMD_NET) */ - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800 -#define CONFIG_SYS_INIT_RAM_SIZE 0x800 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ - CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) - -#endif /* __CONFIG_H */ diff --git a/package/boot/uboot-omap4/Makefile b/package/boot/uboot-omap4/Makefile deleted file mode 100644 index d0830cfb85..0000000000 --- a/package/boot/uboot-omap4/Makefile +++ /dev/null @@ -1,92 +0,0 @@ -# -# Copyright (C) 2012 OpenWrt.org -# -# This is free software, licensed under the GNU General Public License v2. -# See /LICENSE for more information. -# - -include $(TOPDIR)/rules.mk -include $(INCLUDE_DIR)/kernel.mk - -PKG_NAME:=u-boot -PKG_VERSION:=2011.12 -PKG_RELEASE:=1 - -PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION) -PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 -PKG_SOURCE_URL:= \ - http://mirror2.openwrt.org/sources \ - ftp://ftp.denx.de/pub/u-boot -PKG_MD5SUM:=7f29b9f6da44d6e46e988e7561fd1d5f -PKG_TARGETS:=bin - -include $(INCLUDE_DIR)/package.mk - -define uboot/Default - TITLE:= - CONFIG:= - IMAGE:= -endef - -define uboot/omap4_panda - TITLE:=U-Boot for the Pandaboard -endef - -UBOOTS:=omap4_panda - -define Package/uboot/template -define Package/uboot-omap4-$(1) - SECTION:=boot - CATEGORY:=Boot Loaders - DEPENDS:=@TARGET_omap4 - TITLE:=$(2) - URL:=http://www.denx.de/wiki/U-Boot - VARIANT:=$(1) -endef -endef - -define BuildUbootPackage - $(eval $(uboot/Default)) - $(eval $(uboot/$(1))) - $(call Package/uboot/template,$(1),$(TITLE)) -endef - - -ifdef BUILD_VARIANT -$(eval $(call uboot/$(BUILD_VARIANT))) -UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT)) -UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_VARIANT)-u-boot.bin) -endif - -define Build/Prepare - $(call Build/Prepare/Default) -# $(CP) ./files/* $(PKG_BUILD_DIR) - find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf -endef - -define Build/Configure - $(MAKE) -C $(PKG_BUILD_DIR) \ - $(UBOOT_CONFIG)_config -endef - -define Build/Compile - $(MAKE) -C $(PKG_BUILD_DIR) \ - CROSS_COMPILE=$(TARGET_CROSS) -endef - -define Package/uboot/install/template -define Package/uboot-omap4-$(1)/install - $(INSTALL_DIR) $$(1) - $(CP) $(PKG_BUILD_DIR)/MLO $(BIN_DIR)/MLO-$(BOARD) - $(CP) $(PKG_BUILD_DIR)/u-boot.img $(BIN_DIR)/$(2) -endef -endef - -$(foreach u,$(UBOOTS), \ - $(eval $(call Package/uboot/install/template,$(u),openwrt-$(BOARD)-$(u)-u-boot.img)) \ -) - -$(foreach u,$(UBOOTS), \ - $(eval $(call BuildUbootPackage,$(u))) \ - $(eval $(call BuildPackage,uboot-omap4-$(u))) \ -) -- cgit v1.2.3