From f5a9181d6e94044657df00d3531cf97f2e8d1d16 Mon Sep 17 00:00:00 2001 From: Guillaume Lefebvre Date: Sat, 21 Dec 2019 00:21:32 +0100 Subject: ath79: fix wmac initialization for Zyxel NBG6716 2.4 GHz Wifi on ath79 is set up in 10-ath9k-eeprom, but in ar71xx it was done with ath79_register_wmac. Thus, the following errors are observed on the device: ath: phy1: Unable to initialize hardware; initialization status: -5 ath9k 18100000.wmac: failed to initialize device ath9k: probe of 18100000.wmac failed with error -5 This patch changes the ath79 support to properly use wmac as well. This will also require fixing the MAC address in a different way. Signed-off-by: Guillaume Lefebvre [several adjustments to 10-fix-wifi-mac, use correct MAC address, rewrite commit message] Signed-off-by: Adrian Schmutzler --- target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts | 2 ++ .../base-files/etc/hotplug.d/firmware/10-ath9k-eeprom | 4 ---- .../base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac | 18 ++++++++++++++++++ 3 files changed, 20 insertions(+), 4 deletions(-) create mode 100644 target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts index 4ad65c31e8..a495bb187b 100644 --- a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts +++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts @@ -262,6 +262,8 @@ &wmac { status = "okay"; + + mtd-cal-data = <&art 0x1000>; }; &pcie1 { diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index d2f8bae1ca..f5fae46dfb 100644 --- a/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -15,10 +15,6 @@ case "$FIRMWARE" in netgear,wndr4500-v3) caldata_extract "caldata" 0x1000 0x440 ;; - zyxel,nbg6716) - caldata_extract "art" 0x1000 0x440 - ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr) - ;; *) caldata_die "board $board is not supported yet" ;; diff --git a/target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac b/target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac new file mode 100644 index 0000000000..6c61e5df00 --- /dev/null +++ b/target/linux/ath79/nand/base-files/etc/hotplug.d/ieee80211/10-fix-wifi-mac @@ -0,0 +1,18 @@ +[ "$ACTION" = "add" ] || exit 0 + +PHYNBR=${DEVPATH##*/phy} + +[ -n $PHYNBR ] || exit 0 + +. /lib/functions.sh +. /lib/functions/system.sh + +board=$(board_name) + +case $board in + zyxel,nbg6716) + # Set mac address for 2.4g device + [ "$PHYNBR" -eq 1 ] && \ + mtd_get_mac_ascii u-boot-env ethaddr > /sys${DEVPATH}/macaddress + ;; +esac -- cgit v1.2.3