From e8afeaabc09125eff30a7db1e90604e90286fe6b Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Wed, 24 Jun 2020 19:40:45 +0200 Subject: ipq40xx: set IMAGES in Device/Default definition The Device/Default definition sets a default IMAGE/sysupgrade.bin, but does not enable it by setting IMAGES. This is not consistent, and has led to IMAGES being defined at various other places in the file. Thus, this patch consolidates the default value for IMAGES by putting it in Device/Default. Since it's still overwritten where necessary, this patch is cosmetic. Signed-off-by: Adrian Schmutzler --- target/linux/ipq40xx/image/Makefile | 40 ++++++++++++------------------------- 1 file changed, 13 insertions(+), 27 deletions(-) diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index 632836e94f..a374c7da47 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -13,6 +13,7 @@ define Device/Default KERNEL_LOADADDR := 0x80208000 DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1))) SUPPORTED_DEVICES := $(subst _,$(comma),$(1)) + IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata IMAGE/sysupgrade.bin/squashfs := endef @@ -46,7 +47,7 @@ define Device/DniImage $(call Device/FitzImage) NETGEAR_BOARD_ID := NETGEAR_HW_ID := - IMAGES := factory.img sysupgrade.bin + IMAGES += factory.img IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \ append-rootfs | pad-rootfs | append-metadata | check-size @@ -110,7 +111,6 @@ define Device/8dev_habanero-dvk IMAGE_SIZE := 30976k SOC := qcom-ipq4019 DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size endef TARGET_DEVICES += 8dev_habanero-dvk @@ -151,7 +151,6 @@ define Device/aruba_glenmorangie DEVICE_VENDOR := Aruba SOC := qcom-ipq4029 DEVICE_PACKAGES := ipq-wifi-aruba_ap-303 - IMAGES := sysupgrade.bin endef define Device/aruba_ap-303 @@ -178,7 +177,6 @@ define Device/asus_map-ac2200 DEVICE_VENDOR := ASUS DEVICE_MODEL := Lyra (MAP-AC2200) SOC := qcom-ipq4019 - IMAGES := sysupgrade.bin DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k endef TARGET_DEVICES += asus_map-ac2200 @@ -199,7 +197,6 @@ define Device/asus_rt-ac58u # to add a version... or we are very careful not to add '\0' into that # string and call it a day.... Yeah, we do the latter! UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U') - IMAGES := sysupgrade.bin DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \ kmod-usb-ledtrig-usbport endef @@ -214,7 +211,7 @@ define Device/avm_fritzbox-4040 IMAGE_SIZE := 29056k UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin UBOOT_PARTITION_SIZE := 524288 - IMAGES = eva.bin sysupgrade.bin + IMAGES += eva.bin IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size DEVICE_PACKAGES := fritz-tffs fritz-caldata @@ -227,7 +224,6 @@ define Device/avm_fritzbox-7530 DEVICE_MODEL := FRITZ!Box 7530 SOC := qcom-ipq4019 DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand - IMAGES := sysupgrade.bin endef TARGET_DEVICES += avm_fritzbox-7530 @@ -237,7 +233,6 @@ define Device/avm_fritzrepeater-1200 DEVICE_MODEL := FRITZ!Repeater 1200 SOC := qcom-ipq4019 DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200 - IMAGES := sysupgrade.bin endef TARGET_DEVICES += avm_fritzrepeater-1200 @@ -247,7 +242,6 @@ define Device/avm_fritzrepeater-3000 DEVICE_MODEL := FRITZ!Repeater 3000 SOC := qcom-ipq4019 DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand - IMAGES := sysupgrade.bin endef TARGET_DEVICES += avm_fritzrepeater-3000 @@ -304,7 +298,7 @@ define Device/compex_wpj428 BLOCKSIZE := 64k IMAGE_SIZE := 31232k KERNEL_SIZE := 4096k - IMAGES = sysupgrade.bin cpximg-6a04.bin + IMAGES += cpximg-6a04.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3 DEVICE_PACKAGES := kmod-gpio-beeper @@ -321,7 +315,7 @@ define Device/dlink_dap-2610 WRGG_DEVNAME := /dev/mtdblock/8 WRGG_SIGNATURE := wapac30_dkbs_dap2610 IMAGE_SIZE := 14080k - IMAGES := sysupgrade.bin factory.bin + IMAGES += factory.bin # Bootloader expects a special 160 byte header which is added by # wrgg-image. # Factory image size must be larger than 6MB, and size in wrgg header must @@ -347,7 +341,6 @@ define Device/engenius_eap1300 SOC := qcom-ipq4018 KERNEL_SIZE := 5120k IMAGE_SIZE := 25344k - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata endef TARGET_DEVICES += engenius_eap1300 @@ -371,7 +364,7 @@ define Device/engenius_emd1 DEVICE_DTS_CONFIG := config@4 SOC := qcom-ipq4018 IMAGE_SIZE := 30720k - IMAGES := sysupgrade.bin factory.bin + IMAGES += factory.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size endef @@ -385,7 +378,7 @@ define Device/engenius_emr3500 SOC := qcom-ipq4018 KERNEL_SIZE := 4096k IMAGE_SIZE := 30720k - IMAGES := sysupgrade.bin factory.bin + IMAGES += factory.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size endef @@ -410,7 +403,7 @@ define Device/engenius_ens620ext IMAGE_SIZE := 21312k KERNEL_SIZE := 5120k FILESYSTEMS := squashfs - IMAGES := sysupgrade.bin factory_30.bin factory_35.bin + IMAGES += factory_30.bin factory_35.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER) IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW) @@ -425,7 +418,6 @@ define Device/ezviz_cs-w3-wd1200g-eup DEVICE_DTS_CONFIG := config@4 IMAGE_SIZE := 14848k SOC := qcom-ipq4018 - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \ append-metadata DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \ @@ -441,7 +433,6 @@ define Device/glinet_gl-b1300 SOC := qcom-ipq4029 KERNEL_SIZE := 4096k IMAGE_SIZE := 26624k - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata endef TARGET_DEVICES += glinet_gl-b1300 @@ -477,7 +468,7 @@ define Device/linksys_ea6350v3 KERNEL_SIZE := 3072k IMAGE_SIZE := 37888k UBINIZE_OPTS := -E 5 - IMAGES := factory.bin sysupgrade.bin + IMAGES += factory.bin IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3 DEVICE_PACKAGES := uboot-envtools endef @@ -493,7 +484,7 @@ define Device/linksys_ea8300 BLOCKSIZE := 128k PAGESIZE := 2048 UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF - IMAGES := sysupgrade.bin factory.bin + IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300 DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport endef @@ -506,7 +497,6 @@ define Device/meraki_mr33 SOC := qcom-ipq4029 BLOCKSIZE := 128k PAGESIZE := 2048 - IMAGES = sysupgrade.bin DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct endef TARGET_DEVICES += meraki_mr33 @@ -557,7 +547,7 @@ define Device/openmesh_a42 BLOCKSIZE := 64k KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE) IMAGE_SIZE := 15616k - IMAGES = factory.bin sysupgrade.bin + IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata DEVICE_PACKAGES := uboot-envtools @@ -573,7 +563,7 @@ define Device/openmesh_a62 BLOCKSIZE := 64k KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE) IMAGE_SIZE := 15552k - IMAGES = factory.bin sysupgrade.bin + IMAGES += factory.bin IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62 IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools @@ -592,7 +582,6 @@ define Device/qcom_ap-dk01.1-c1 KERNEL_SIZE := 4096k IMAGE_SIZE := 26624k $(call Device/FitImage) - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata endef TARGET_DEVICES += qcom_ap-dk01.1-c1 @@ -622,7 +611,6 @@ define Device/qxwlan_e2600ac-c1 SOC := qcom-ipq4019 KERNEL_SIZE := 4096k IMAGE_SIZE := 31232k - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac endef @@ -651,7 +639,6 @@ define Device/unielec_u4019-32m SOC := qcom-ipq4019 KERNEL_SIZE := 4096k IMAGE_SIZE := 31232k - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata endef TARGET_DEVICES += unielec_u4019-32m @@ -667,7 +654,7 @@ define Device/zyxel_nbg6617 RAS_ROOTFS_SIZE := 19840k RAS_VERSION := "$(VERSION_DIST) $(REVISION)" IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata - IMAGES := sysupgrade.bin factory.bin + IMAGES += factory.bin # The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is # at least as large as the one of the initial firmware image (not the current # one on the device). This only applies to the Web-UI, the bootlaoder ignores @@ -685,7 +672,6 @@ define Device/zyxel_wre6606 DEVICE_DTS_CONFIG := config@4 SOC := qcom-ipq4018 IMAGE_SIZE := 13184k - IMAGES := sysupgrade.bin IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers endef -- cgit v1.2.3