From 4537d45ae8bf53bcb34210fccf6d7c24d18eb454 Mon Sep 17 00:00:00 2001
From: Felix Fietkau <nbd@openwrt.org>
Date: Tue, 1 Mar 2016 21:32:22 +0000
Subject: iw: update to version 4.3, sync with trunk r47782
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/branches/chaos_calmer@48870 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
package/network/utils/iw/Makefile | 4 +-
.../utils/iw/patches/001-nl80211_h_sync.patch | 731 +++------------------
.../utils/iw/patches/120-antenna_gain.patch | 3 +-
.../network/utils/iw/patches/200-reduce_size.patch | 190 +++++-
.../patches/300-display_interface_TX_power.patch | 32 +
.../utils/iw/patches/301-ibss_add_VHT80.patch | 104 +++
.../iw/patches/302-ibss_use_MHz_instead_MHZ.patch | 41 ++
.../utils/iw/patches/303-mesh_add_VHT80.patch | 170 +++++
8 files changed, 603 insertions(+), 672 deletions(-)
create mode 100644 package/network/utils/iw/patches/300-display_interface_TX_power.patch
create mode 100644 package/network/utils/iw/patches/301-ibss_add_VHT80.patch
create mode 100644 package/network/utils/iw/patches/302-ibss_use_MHz_instead_MHZ.patch
create mode 100644 package/network/utils/iw/patches/303-mesh_add_VHT80.patch
diff --git a/package/network/utils/iw/Makefile b/package/network/utils/iw/Makefile
index 05ecd8adad..ad82081570 100644
--- a/package/network/utils/iw/Makefile
+++ b/package/network/utils/iw/Makefile
@@ -8,12 +8,12 @@
include $(TOPDIR)/rules.mk
PKG_NAME:=iw
-PKG_VERSION:=3.17
+PKG_VERSION:=4.3
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
PKG_SOURCE_URL:=https://www.kernel.org/pub/software/network/iw
-PKG_MD5SUM:=69c4a2f29cf560247febc6cad7161a72
+PKG_MD5SUM:=7adec72e91ebdd9c55429fa34a23a6f5
PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org>
PKG_LICENSE:=GPL-2.0
diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
index 03a3d38c66..7de225859b 100644
--- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch
+++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch
@@ -1,672 +1,111 @@
--- a/nl80211.h
+++ b/nl80211.h
-@@ -25,10 +25,30 @@
- *
- */
-
-+/*
-+ * This header file defines the userspace API to the wireless stack. Please
-+ * be careful not to break things - i.e. don't move anything around or so
-+ * unless you can demonstrate that it breaks neither API nor ABI.
-+ *
-+ * Additions to the API should be accompanied by actual implementations in
-+ * an upstream driver, so that example implementations exist in case there
-+ * are ever concerns about the precise semantics of the API or changes are
-+ * needed, and to ensure that code for dead (no longer implemented) API
-+ * can actually be identified and removed.
-+ * Nonetheless, semantics should also be documented carefully in this file.
-+ */
-+
- #include <linux/types.h>
-
- #define NL80211_GENL_NAME "nl80211"
-
-+#define NL80211_MULTICAST_GROUP_CONFIG "config"
-+#define NL80211_MULTICAST_GROUP_SCAN "scan"
-+#define NL80211_MULTICAST_GROUP_REG "regulatory"
-+#define NL80211_MULTICAST_GROUP_MLME "mlme"
-+#define NL80211_MULTICAST_GROUP_VENDOR "vendor"
-+#define NL80211_MULTICAST_GROUP_TESTMODE "testmode"
-+
- /**
- * DOC: Station handling
- *
-@@ -173,8 +193,8 @@
- * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME.
- *
- * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration;
-- * either a dump request on a %NL80211_ATTR_WIPHY or a specific get
-- * on an %NL80211_ATTR_IFINDEX is supported.
-+ * either a dump request for all interfaces or a specific get with a
-+ * single %NL80211_ATTR_IFINDEX is supported.
- * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires
- * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE.
- * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response
-@@ -227,7 +247,11 @@
- * the interface identified by %NL80211_ATTR_IFINDEX.
- * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC
- * or, if no MAC address given, all stations, on the interface identified
-- * by %NL80211_ATTR_IFINDEX.
-+ * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and
-+ * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type
-+ * of disconnection indication should be sent to the station
-+ * (Deauthentication or Disassociation frame and reason code for that
-+ * frame).
- *
- * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to
- * destination %NL80211_ATTR_MAC on the interface identified by
-@@ -248,7 +272,18 @@
- * %NL80211_ATTR_IFINDEX.
- *
- * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set
-- * regulatory domain.
-+ * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device
-+ * has a private regulatory domain, it will be returned. Otherwise, the
-+ * global regdomain will be returned.
-+ * A device will have a private regulatory domain if it uses the
-+ * regulatory_hint() API. Even when a private regdomain is used the channel
-+ * information will still be mended according to further hints from
-+ * the regulatory core to help with compliance. A dump version of this API
-+ * is now available which will returns the global regdomain as well as
-+ * all private regdomains of present wiphys (for those that have it).
-+ * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then
-+ * its private regdomain is the only valid one for it. The regulatory
-+ * core is not used to help with compliance in this case.
- * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command
- * after being queried by the kernel. CRDA replies by sending a regulatory
- * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our
-@@ -302,7 +337,9 @@
- * if passed, define which channels should be scanned; if not
- * passed, all channels allowed for the current regulatory domain
- * are used. Extra IEs can also be passed from the userspace by
-- * using the %NL80211_ATTR_IE attribute.
-+ * using the %NL80211_ATTR_IE attribute. The first cycle of the
-+ * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
-+ * is supplied.
- * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
- * scheduled scan is not running. The caller may assume that as soon
- * as the call returns, it is safe to start a new scheduled scan again.
-@@ -639,7 +676,18 @@
- * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels
- * independently of the userspace SME, send this event indicating
- * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the
-- * attributes determining channel width.
-+ * attributes determining channel width. This indication may also be
-+ * sent when a remotely-initiated switch (e.g., when a STA receives a CSA
-+ * from the remote AP) is completed;
-+ *
-+ * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch
-+ * has been started on an interface, regardless of the initiator
-+ * (ie. whether it was requested from a remote device or
-+ * initiated on our own). It indicates that
-+ * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ
-+ * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may
-+ * decide to react to this indication by requesting other
-+ * interfaces to change channel as well.
- *
- * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by
- * its %NL80211_ATTR_WDEV identifier. It must have been created with
-@@ -738,6 +786,31 @@
- * before removing a station entry entirely, or before disassociating
- * or similar, cleanup will happen in the driver/device in this case.
- *
-+ * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to
-+ * destination %NL80211_ATTR_MAC on the interface identified by
-+ * %NL80211_ATTR_IFINDEX.
-+ *
-+ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and
-+ * bandwidth of a channel must be given.
-+ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the
-+ * network is determined by the network interface.
-+ *
-+ * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer,
-+ * identified by the %NL80211_ATTR_MAC parameter. A target channel is
-+ * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining
-+ * channel width/type. The target operating class is given via
-+ * %NL80211_ATTR_OPER_CLASS.
-+ * The driver is responsible for continually initiating channel-switching
-+ * operations and returning to the base channel for communication with the
-+ * AP.
-+ * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS
-+ * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel
-+ * when this command completes.
-+ *
-+ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used
-+ * as an event to indicate changes for devices with wiphy-specific regdom
-+ * management.
-+ *
- * @NL80211_CMD_MAX: highest used command number
- * @__NL80211_CMD_AFTER_LAST: internal use
- */
-@@ -912,6 +985,18 @@ enum nl80211_commands {
- NL80211_CMD_ADD_TX_TS,
- NL80211_CMD_DEL_TX_TS,
-
-+ NL80211_CMD_GET_MPP,
-+
-+ NL80211_CMD_JOIN_OCB,
-+ NL80211_CMD_LEAVE_OCB,
-+
-+ NL80211_CMD_CH_SWITCH_STARTED_NOTIFY,
-+
-+ NL80211_CMD_TDLS_CHANNEL_SWITCH,
-+ NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH,
-+
-+ NL80211_CMD_WIPHY_REG_CHANGE,
-+
- /* add new commands above here */
-
- /* used to define NL80211_CMD_MAX below */
-@@ -1606,9 +1691,16 @@ enum nl80211_commands {
- * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32.
- * As specified in the &enum nl80211_tdls_peer_capability.
- *
-- * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface
-+ * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface
- * creation then the new interface will be owned by the netlink socket
-- * that created it and will be destroyed when the socket is closed
-+ * that created it and will be destroyed when the socket is closed.
-+ * If set during scheduled scan start then the new scan req will be
-+ * owned by the netlink socket that created it and the scheduled scan will
-+ * be stopped when the socket is closed.
-+ * If set during configuration of regulatory indoor operation then the
-+ * regulatory indoor configuration would be owned by the netlink socket
-+ * that configured the indoor setting, and the indoor operation would be
-+ * cleared when the socket is closed.
- *
- * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
- * the TDLS link initiator.
-@@ -1638,6 +1730,40 @@ enum nl80211_commands {
- * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see
- * &enum nl80211_smps_mode.
- *
-+ * @NL80211_ATTR_OPER_CLASS: operating class
-+ *
-+ * @NL80211_ATTR_MAC_MASK: MAC address mask
-+ *
-+ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device
-+ * is self-managing its regulatory information and any regulatory domain
-+ * obtained from it is coming from the device's wiphy and not the global
-+ * cfg80211 regdomain.
-+ *
-+ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte
-+ * array. The feature flags are identified by their bit index (see &enum
-+ * nl80211_ext_feature_index). The bit index is ordered starting at the
-+ * least-significant bit of the first byte in the array, ie. bit index 0
-+ * is located at bit 0 of byte 0. bit index 25 would be located at bit 1
-+ * of byte 3 (u8 array).
-+ *
-+ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be
-+ * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY
-+ * may return a survey entry without a channel indicating global radio
-+ * statistics (only some values are valid and make sense.)
-+ * For devices that don't return such an entry even then, the information
-+ * should be contained in the result as the sum of the respective counters
-+ * over all channels.
-+ *
-+ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a
-+ * WoWLAN net-detect scan) is started, u32 in seconds.
-+
-+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
-+ * is operating in an indoor environment.
+@@ -10,6 +10,7 @@
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
++ * Copyright 2015 Intel Deutschland GmbH
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+@@ -328,7 +329,15 @@
+ * partial scan results may be available
+ *
+ * @NL80211_CMD_START_SCHED_SCAN: start a scheduled scan at certain
+- * intervals, as specified by %NL80211_ATTR_SCHED_SCAN_INTERVAL.
++ * intervals and certain number of cycles, as specified by
++ * %NL80211_ATTR_SCHED_SCAN_PLANS. If %NL80211_ATTR_SCHED_SCAN_PLANS is
++ * not specified and only %NL80211_ATTR_SCHED_SCAN_INTERVAL is specified,
++ * scheduled scan will run in an infinite loop with the specified interval.
++ * These attributes are mutually exculsive,
++ * i.e. NL80211_ATTR_SCHED_SCAN_INTERVAL must not be passed if
++ * NL80211_ATTR_SCHED_SCAN_PLANS is defined.
++ * If for some reason scheduled scan is aborted by the driver, all scan
++ * plans are canceled (including scan plans that did not start yet).
+ * Like with normal scans, if SSIDs (%NL80211_ATTR_SCAN_SSIDS)
+ * are passed, they are used in the probe requests. For
+ * broadcast, a broadcast SSID must be passed (ie. an empty
+@@ -1761,6 +1770,22 @@ enum nl80211_commands {
+ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device
+ * is operating in an indoor environment.
+ *
++ * @NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS: maximum number of scan plans for
++ * scheduled scan supported by the device (u32), a wiphy attribute.
++ * @NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL: maximum interval (in seconds) for
++ * a scan plan (u32), a wiphy attribute.
++ * @NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS: maximum number of iterations in
++ * a scan plan (u32), a wiphy attribute.
++ * @NL80211_ATTR_SCHED_SCAN_PLANS: a list of scan plans for scheduled scan.
++ * Each scan plan defines the number of scan iterations and the interval
++ * between scans. The last scan plan will always run infinitely,
++ * thus it must not specify the number of iterations, only the interval
++ * between scans. The scan plans are executed sequentially.
++ * Each scan plan is a nested attribute of &enum nl80211_sched_scan_plan.
+ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
+ *
-+ * @NUM_NL80211_ATTR: total number of nl80211_attrs available
+ * @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
- */
-@@ -1973,7 +2099,7 @@ enum nl80211_attrs {
-
- NL80211_ATTR_TDLS_PEER_CAPABILITY,
+@@ -2130,6 +2155,13 @@ enum nl80211_attrs {
-- NL80211_ATTR_IFACE_SOCKET_OWNER,
-+ NL80211_ATTR_SOCKET_OWNER,
+ NL80211_ATTR_REG_INDOOR,
- NL80211_ATTR_CSA_C_OFFSETS_TX,
- NL80211_ATTR_MAX_CSA_COUNTERS,
-@@ -1990,15 +2116,35 @@ enum nl80211_attrs {
-
- NL80211_ATTR_SMPS_MODE,
-
-+ NL80211_ATTR_OPER_CLASS,
-+
-+ NL80211_ATTR_MAC_MASK,
-+
-+ NL80211_ATTR_WIPHY_SELF_MANAGED_REG,
-+
-+ NL80211_ATTR_EXT_FEATURES,
-+
-+ NL80211_ATTR_SURVEY_RADIO_STATS,
-+
-+ NL80211_ATTR_NETNS_FD,
-+
-+ NL80211_ATTR_SCHED_SCAN_DELAY,
-+
-+ NL80211_ATTR_REG_INDOOR,
++ NL80211_ATTR_MAX_NUM_SCHED_SCAN_PLANS,
++ NL80211_ATTR_MAX_SCAN_PLAN_INTERVAL,
++ NL80211_ATTR_MAX_SCAN_PLAN_ITERATIONS,
++ NL80211_ATTR_SCHED_SCAN_PLANS,
+
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-+ NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST,
- NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1
- };
-
- /* source-level API compatibility */
- #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
- #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
-+#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
-
- /*
- * Allow user space programs to use #ifdef on new attributes by defining them
-@@ -2028,7 +2174,7 @@ enum nl80211_attrs {
-
- #define NL80211_MAX_SUPP_RATES 32
- #define NL80211_MAX_SUPP_HT_RATES 77
--#define NL80211_MAX_SUPP_REG_RULES 32
-+#define NL80211_MAX_SUPP_REG_RULES 64
- #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0
- #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16
- #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24
-@@ -2064,6 +2210,8 @@ enum nl80211_attrs {
- * and therefore can't be created in the normal ways, use the
- * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE
- * commands to create and destroy one
-+ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS
-+ * This mode corresponds to the MIB variable dot11OCBActivated=true
- * @NL80211_IFTYPE_MAX: highest interface type number currently defined
- * @NUM_NL80211_IFTYPES: number of defined interface types
- *
-@@ -2083,6 +2231,7 @@ enum nl80211_iftype {
- NL80211_IFTYPE_P2P_CLIENT,
- NL80211_IFTYPE_P2P_GO,
- NL80211_IFTYPE_P2P_DEVICE,
-+ NL80211_IFTYPE_OCB,
-
- /* keep last */
- NUM_NL80211_IFTYPES,
-@@ -2165,8 +2314,15 @@ struct nl80211_sta_flag_update {
- * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8)
- * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8)
- * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate
-- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate
-+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the
-+ * same as 160 for purposes of the bitrates
- * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate
-+ * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is
-+ * a legacy rate and will be reported as the actual bitrate, i.e.
-+ * half the base (20 MHz) rate
-+ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
-+ * a legacy rate and will be reported as the actual bitrate, i.e.
-+ * a quarter of the base (20 MHz) rate
- * @__NL80211_RATE_INFO_AFTER_LAST: internal use
- */
- enum nl80211_rate_info {
-@@ -2181,6 +2337,8 @@ enum nl80211_rate_info {
- NL80211_RATE_INFO_80_MHZ_WIDTH,
- NL80211_RATE_INFO_80P80_MHZ_WIDTH,
- NL80211_RATE_INFO_160_MHZ_WIDTH,
-+ NL80211_RATE_INFO_10_MHZ_WIDTH,
-+ NL80211_RATE_INFO_5_MHZ_WIDTH,
-
- /* keep last */
- __NL80211_RATE_INFO_AFTER_LAST,
-@@ -2225,18 +2383,24 @@ enum nl80211_sta_bss_param {
- *
- * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved
- * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs)
-- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station)
-- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station)
-- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station)
-- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station)
-+ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length)
-+ * (u32, from this station)
-+ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length)
-+ * (u32, to this station)
-+ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length)
-+ * (u64, from this station)
-+ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length)
-+ * (u64, to this station)
- * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm)
- * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute
- * containing info as possible, see &enum nl80211_rate_info
-- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station)
-- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this
-- * station)
-- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station)
-- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station)
-+ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs)
-+ * (u32, from this station)
-+ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs)
-+ * (u32, to this station)
-+ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station)
-+ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs)
-+ * (u32, to this station)
- * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm)
- * @NL80211_STA_INFO_LLID: the station's mesh LLID
- * @NL80211_STA_INFO_PLID: the station's mesh PLID
-@@ -2260,6 +2424,16 @@ enum nl80211_sta_bss_param {
- * Same format as NL80211_STA_INFO_CHAIN_SIGNAL.
- * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the
- * 802.11 header (u32, kbps)
-+ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons
-+ * (u64)
-+ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64)
-+ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average
-+ * for beacons only (u8, dBm)
-+ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats)
-+ * This is a nested attribute where each the inner attribute number is the
-+ * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames;
-+ * each one of those is again nested with &enum nl80211_tid_stats
-+ * attributes carrying the actual values.
- * @__NL80211_STA_INFO_AFTER_LAST: internal
- * @NL80211_STA_INFO_MAX: highest possible station info attribute
+@@ -3364,6 +3396,9 @@ enum nl80211_bss_scan_width {
+ * (not present if no beacon frame has been received yet)
+ * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and
+ * @NL80211_BSS_TSF is known to be from a probe response (flag attribute)
++ * @NL80211_BSS_LAST_SEEN_BOOTTIME: CLOCK_BOOTTIME timestamp when this entry
++ * was last updated by a received frame. The value is expected to be
++ * accurate to about 10ms. (u64, nanoseconds)
+ * @__NL80211_BSS_AFTER_LAST: internal
+ * @NL80211_BSS_MAX: highest BSS attribute
*/
-@@ -2292,6 +2466,10 @@ enum nl80211_sta_info {
- NL80211_STA_INFO_CHAIN_SIGNAL,
- NL80211_STA_INFO_CHAIN_SIGNAL_AVG,
- NL80211_STA_INFO_EXPECTED_THROUGHPUT,
-+ NL80211_STA_INFO_RX_DROP_MISC,
-+ NL80211_STA_INFO_BEACON_RX,
-+ NL80211_STA_INFO_BEACON_SIGNAL_AVG,
-+ NL80211_STA_INFO_TID_STATS,
+@@ -3383,6 +3418,7 @@ enum nl80211_bss {
+ NL80211_BSS_CHAN_WIDTH,
+ NL80211_BSS_BEACON_TSF,
+ NL80211_BSS_PRESP_DATA,
++ NL80211_BSS_LAST_SEEN_BOOTTIME,
/* keep last */
- __NL80211_STA_INFO_AFTER_LAST,
-@@ -2299,6 +2477,31 @@ enum nl80211_sta_info {
+ __NL80211_BSS_AFTER_LAST,
+@@ -4589,4 +4625,28 @@ enum nl80211_tdls_peer_capability {
+ NL80211_TDLS_PEER_WMM = 1<<2,
};
- /**
-+ * enum nl80211_tid_stats - per TID statistics attributes
-+ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved
-+ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64)
-+ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or
-+ * attempted to transmit; u64)
-+ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for
-+ * transmitted MSDUs (not counting the first attempt; u64)
-+ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted
-+ * MSDUs (u64)
-+ * @NUM_NL80211_TID_STATS: number of attributes here
-+ * @NL80211_TID_STATS_MAX: highest numbered attribute here
++/**
++ * enum nl80211_sched_scan_plan - scanning plan for scheduled scan
++ * @__NL80211_SCHED_SCAN_PLAN_INVALID: attribute number 0 is reserved
++ * @NL80211_SCHED_SCAN_PLAN_INTERVAL: interval between scan iterations. In
++ * seconds (u32).
++ * @NL80211_SCHED_SCAN_PLAN_ITERATIONS: number of scan iterations in this
++ * scan plan (u32). The last scan plan must not specify this attribute
++ * because it will run infinitely. A value of zero is invalid as it will
++ * make the scan plan meaningless.
++ * @NL80211_SCHED_SCAN_PLAN_MAX: highest scheduled scan plan attribute number
++ * currently defined
++ * @__NL80211_SCHED_SCAN_PLAN_AFTER_LAST: internal use
+ */
-+enum nl80211_tid_stats {
-+ __NL80211_TID_STATS_INVALID,
-+ NL80211_TID_STATS_RX_MSDU,
-+ NL80211_TID_STATS_TX_MSDU,
-+ NL80211_TID_STATS_TX_MSDU_RETRIES,
-+ NL80211_TID_STATS_TX_MSDU_FAILED,
++enum nl80211_sched_scan_plan {
++ __NL80211_SCHED_SCAN_PLAN_INVALID,
++ NL80211_SCHED_SCAN_PLAN_INTERVAL,
++ NL80211_SCHED_SCAN_PLAN_ITERATIONS,
+
+ /* keep last */
-+ NUM_NL80211_TID_STATS,
-+ NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1
++ __NL80211_SCHED_SCAN_PLAN_AFTER_LAST,
++ NL80211_SCHED_SCAN_PLAN_MAX =
++ __NL80211_SCHED_SCAN_PLAN_AFTER_LAST - 1
+};
+
-+/**
- * enum nl80211_mpath_flags - nl80211 mesh path flags
- *
- * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active
-@@ -2631,6 +2834,11 @@ enum nl80211_sched_scan_match_attr {
- * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated
- * base on contiguous rules and wider channels will be allowed to cross
- * multiple contiguous/overlapping frequency ranges.
-+ * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT
-+ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation
-+ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation
-+ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed
-+ * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
- */
- enum nl80211_reg_rule_flags {
- NL80211_RRF_NO_OFDM = 1<<0,
-@@ -2643,11 +2851,18 @@ enum nl80211_reg_rule_flags {
- NL80211_RRF_NO_IR = 1<<7,
- __NL80211_RRF_NO_IBSS = 1<<8,
- NL80211_RRF_AUTO_BW = 1<<11,
-+ NL80211_RRF_GO_CONCURRENT = 1<<12,
-+ NL80211_RRF_NO_HT40MINUS = 1<<13,
-+ NL80211_RRF_NO_HT40PLUS = 1<<14,
-+ NL80211_RRF_NO_80MHZ = 1<<15,
-+ NL80211_RRF_NO_160MHZ = 1<<16,
- };
-
- #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR
- #define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR
- #define NL80211_RRF_NO_IR NL80211_RRF_NO_IR
-+#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\
-+ NL80211_RRF_NO_HT40PLUS)
-
- /* For backport compatibility with older userspace */
- #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS)
-@@ -2700,16 +2915,18 @@ enum nl80211_user_reg_hint_type {
- * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel
- * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm)
- * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio
-- * spent on this channel
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary
-+ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio
-+ * was turned on (on channel or globally)
-+ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary
- * channel was sensed busy (either due to activity or energy detect)
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension
-+ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension
- * channel was sensed busy
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent
-- * receiving data
-- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent
-- * transmitting data
-+ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent
-+ * receiving data (on channel or globally)
-+ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent
-+ * transmitting data (on channel or globally)
-+ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
-+ * (on this channel or globally)
- * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
- * currently defined
- * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
-@@ -2719,17 +2936,25 @@ enum nl80211_survey_info {
- NL80211_SURVEY_INFO_FREQUENCY,
- NL80211_SURVEY_INFO_NOISE,
- NL80211_SURVEY_INFO_IN_USE,
-- NL80211_SURVEY_INFO_CHANNEL_TIME,
-- NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY,
-- NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY,
-- NL80211_SURVEY_INFO_CHANNEL_TIME_RX,
-- NL80211_SURVEY_INFO_CHANNEL_TIME_TX,
-+ NL80211_SURVEY_INFO_TIME,
-+ NL80211_SURVEY_INFO_TIME_BUSY,
-+ NL80211_SURVEY_INFO_TIME_EXT_BUSY,
-+ NL80211_SURVEY_INFO_TIME_RX,
-+ NL80211_SURVEY_INFO_TIME_TX,
-+ NL80211_SURVEY_INFO_TIME_SCAN,
-
- /* keep last */
- __NL80211_SURVEY_INFO_AFTER_LAST,
- NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1
- };
-
-+/* keep old names for compatibility */
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX
-+#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX
-+
- /**
- * enum nl80211_mntr_flags - monitor configuration flags
- *
-@@ -2894,7 +3119,8 @@ enum nl80211_mesh_power_mode {
- *
- * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've
- * established peering with for longer than this time (in seconds), then
-- * remove it from the STA's list of peers. Default is 30 minutes.
-+ * remove it from the STA's list of peers. You may set this to 0 to disable
-+ * the removal of the STA. Default is 30 minutes.
- *
- * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use
- */
-@@ -3166,6 +3392,9 @@ enum nl80211_bss {
- /**
- * enum nl80211_bss_status - BSS "status"
- * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS.
-+ * Note that this is no longer used since cfg80211 no longer
-+ * keeps track of whether or not authentication was done with
-+ * a given BSS.
- * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS.
- * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS.
- *
-@@ -3379,6 +3608,8 @@ enum nl80211_ps_state {
- * interval in which %NL80211_ATTR_CQM_TXE_PKTS and
- * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an
- * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
-+ * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
-+ * loss event
- * @__NL80211_ATTR_CQM_AFTER_LAST: internal
- * @NL80211_ATTR_CQM_MAX: highest key attribute
- */
-@@ -3391,6 +3622,7 @@ enum nl80211_attr_cqm {
- NL80211_ATTR_CQM_TXE_RATE,
- NL80211_ATTR_CQM_TXE_PKTS,
- NL80211_ATTR_CQM_TXE_INTVL,
-+ NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
-
- /* keep last */
- __NL80211_ATTR_CQM_AFTER_LAST,
-@@ -3403,9 +3635,7 @@ enum nl80211_attr_cqm {
- * configured threshold
- * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the
- * configured threshold
-- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss.
-- * (Note that deauth/disassoc will still follow if the AP is not
-- * available. This event might get used as roaming event, etc.)
-+ * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent)
- */
- enum nl80211_cqm_rssi_threshold_event {
- NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
-@@ -3492,6 +3722,8 @@ struct nl80211_pattern_support {
- * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put
- * the chip into a special state -- works best with chips that have
- * support for low-power operation already (flag)
-+ * Note that this mode is incompatible with all of the others, if
-+ * any others are even supported by the device.
- * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect
- * is detected is implementation-specific (flag)
- * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed
-@@ -3545,6 +3777,28 @@ struct nl80211_pattern_support {
- * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only,
- * the TCP connection ran out of tokens to use for data to send to the
- * service
-+ * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network
-+ * is detected. This is a nested attribute that contains the
-+ * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It
-+ * specifies how the scan is performed (e.g. the interval, the
-+ * channels to scan and the initial delay) as well as the scan
-+ * results that will trigger a wake (i.e. the matchsets). This
-+ * attribute is also sent in a response to
-+ * @NL80211_CMD_GET_WIPHY, indicating the number of match sets
-+ * supported by the driver (u32).
-+ * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute
-+ * containing an array with information about what triggered the
-+ * wake up. If no elements are present in the array, it means
-+ * that the information is not available. If more than one
-+ * element is present, it means that more than one match
-+ * occurred.
-+ * Each element in the array is a nested attribute that contains
-+ * one optional %NL80211_ATTR_SSID attribute and one optional
-+ * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of
-+ * these attributes must be present. If
-+ * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one
-+ * frequency, it means that the match occurred in more than one
-+ * channel.
- * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers
- * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number
- *
-@@ -3570,6 +3824,8 @@ enum nl80211_wowlan_triggers {
- NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH,
- NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST,
- NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS,
-+ NL80211_WOWLAN_TRIG_NET_DETECT,
-+ NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS,
-
- /* keep last */
- NUM_NL80211_WOWLAN_TRIG,
-@@ -4042,6 +4298,27 @@ enum nl80211_ap_sme_features {
- * multiplexing powersave, ie. can turn off all but one chain
- * and then wake the rest up as required after, for example,
- * rts/cts handshake.
-+ * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM
-+ * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS
-+ * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it
-+ * needs to be able to handle Block-Ack agreements and other things.
-+ * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring
-+ * the vif's MAC address upon creation.
-+ * See 'macaddr' field in the vif_params (cfg80211.h).
-+ * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when
-+ * operating as a TDLS peer.
-+ * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a
-+ * random MAC address during scan (if the device is unassociated); the
-+ * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC
-+ * address mask/value will be used.
-+ * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports
-+ * using a random MAC address for every scan iteration during scheduled
-+ * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may
-+ * be set for scheduled scan and the MAC address mask/value will be used.
-+ * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a
-+ * random MAC address for every scan iteration during "net detect", i.e.
-+ * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may
-+ * be set for scheduled scan and the MAC address mask/value will be used.
- */
- enum nl80211_feature_flags {
- NL80211_FEATURE_SK_TX_STATUS = 1 << 0,
-@@ -4070,6 +4347,27 @@ enum nl80211_feature_flags {
- NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23,
- NL80211_FEATURE_STATIC_SMPS = 1 << 24,
- NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25,
-+ NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26,
-+ NL80211_FEATURE_MAC_ON_CREATE = 1 << 27,
-+ NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28,
-+ NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29,
-+ NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30,
-+ NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31,
-+};
-+
-+/**
-+ * enum nl80211_ext_feature_index - bit index of extended features.
-+ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates.
-+ *
-+ * @NUM_NL80211_EXT_FEATURES: number of extended features.
-+ * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
-+ */
-+enum nl80211_ext_feature_index {
-+ NL80211_EXT_FEATURE_VHT_IBSS,
-+
-+ /* add new features before the definition below */
-+ NUM_NL80211_EXT_FEATURES,
-+ MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1
- };
-
- /**
-@@ -4118,11 +4416,21 @@ enum nl80211_connect_failed_reason {
- * dangerous because will destroy stations performance as a lot of frames
- * will be lost while scanning off-channel, therefore it must be used only
- * when really needed
-+ * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or
-+ * for scheduled scan: a different one for every scan iteration). When the
-+ * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and
-+ * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only
-+ * the masked bits will be preserved from the MAC address and the remainder
-+ * randomised. If the attributes are not given full randomisation (46 bits,
-+ * locally administered 1, multicast 0) is assumed.
-+ * This flag must not be requested when the feature isn't supported, check
-+ * the nl80211 feature flags for the device.
- */
- enum nl80211_scan_flags {
- NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0,
- NL80211_SCAN_FLAG_FLUSH = 1<<1,
- NL80211_SCAN_FLAG_AP = 1<<2,
-+ NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3,
- };
-
- /**
+ #endif /* __LINUX_NL80211_H */
diff --git a/package/network/utils/iw/patches/120-antenna_gain.patch b/package/network/utils/iw/patches/120-antenna_gain.patch
index cf6a3fa221..6a45c70b80 100644
--- a/package/network/utils/iw/patches/120-antenna_gain.patch
+++ b/package/network/utils/iw/patches/120-antenna_gain.patch
@@ -1,12 +1,11 @@
--- a/phy.c
+++ b/phy.c
-@@ -495,3 +495,31 @@ COMMAND(set, antenna, "<bitmap> | all |
+@@ -524,3 +524,30 @@ COMMAND(set, antenna, "<bitmap> | all |
NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna,
"Set a bitmap of allowed antennas to use for TX and RX.\n"
"The driver may reject antenna configurations it cannot support.");
+
+static int handle_antenna_gain(struct nl80211_state *state,
-+ struct nl_cb *cb,
+ struct nl_msg *msg,
+ int argc, char **argv,
+ enum id_input id)
diff --git a/package/network/utils/iw/patches/200-reduce_size.patch b/package/network/utils/iw/patches/200-reduce_size.patch
index 882cf89f8d..dea24fb495 100644
--- a/package/network/utils/iw/patches/200-reduce_size.patch
+++ b/package/network/utils/iw/patches/200-reduce_size.patch
@@ -2,18 +2,56 @@
+++ b/Makefile
@@ -15,8 +15,8 @@ CFLAGS += -Wall -Wundef -Wstrict-prototy
OBJS = iw.o genl.o event.o info.o phy.o \
- interface.o ibss.o station.o survey.o util.o \
- mesh.o mpath.o scan.o reg.o version.o \
+ interface.o ibss.o station.o survey.o util.o ocb.o \
+ mesh.o mpath.o mpp.o scan.o reg.o version.o \
- reason.o status.o connect.o link.o offch.o ps.o cqm.o \
-- bitrate.o wowlan.o coalesce.o roc.o p2p.o
-+ reason.o status.o connect.o link.o ps.o \
-+ bitrate.o
+- bitrate.o wowlan.o coalesce.o roc.o p2p.o vendor.o
++ reason.o status.o link.o offch.o ps.o cqm.o \
++ bitrate.o vendor.o
OBJS += sections.o
OBJS-$(HWSIM) += hwsim.o
+--- a/event.c
++++ b/event.c
+@@ -342,6 +342,7 @@ static int print_event(struct nl_msg *ms
+ }
+
+ switch (gnlh->cmd) {
++#if 0
+ case NL80211_CMD_NEW_WIPHY:
+ printf("renamed to %s\n", nla_get_string(tb[NL80211_ATTR_WIPHY_NAME]));
+ break;
+@@ -376,6 +377,7 @@ static int print_event(struct nl_msg *ms
+ case NL80211_CMD_SCHED_SCAN_RESULTS:
+ printf("got scheduled scan results\n");
+ break;
++#endif
+ case NL80211_CMD_REG_CHANGE:
+ printf("regulatory domain change: ");
+
+@@ -454,6 +456,7 @@ static int print_event(struct nl_msg *ms
+ mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC]));
+ printf("del station %s\n", macbuf);
+ break;
++#if 0
+ case NL80211_CMD_JOIN_IBSS:
+ mac_addr_n2a(macbuf, nla_data(tb[NL80211_ATTR_MAC]));
+ printf("IBSS %s joined\n", macbuf);
+@@ -610,9 +613,9 @@ static int print_event(struct nl_msg *ms
+ case NL80211_CMD_DEL_WIPHY:
+ printf("delete wiphy\n");
+ break;
++#endif
+ default:
+- printf("unknown event %d (%s)\n",
+- gnlh->cmd, command_name(gnlh->cmd));
++ printf("unknown event %d\n", gnlh->cmd);
+ break;
+ }
+
--- a/info.c
+++ b/info.c
-@@ -207,6 +207,7 @@ next:
+@@ -219,6 +219,7 @@ next:
}
}
@@ -21,7 +59,7 @@
if (tb_band[NL80211_BAND_ATTR_RATES]) {
printf("\t\tBitrates (non-HT):\n");
nla_for_each_nested(nl_rate, tb_band[NL80211_BAND_ATTR_RATES], rem_rate) {
-@@ -223,6 +224,7 @@ next:
+@@ -235,6 +236,7 @@ next:
printf("\n");
}
}
@@ -29,7 +67,7 @@
}
}
-@@ -273,6 +275,7 @@ next:
+@@ -291,6 +293,7 @@ next:
printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage);
}
@@ -37,7 +75,7 @@
if (tb_msg[NL80211_ATTR_CIPHER_SUITES]) {
int num = nla_len(tb_msg[NL80211_ATTR_CIPHER_SUITES]) / sizeof(__u32);
int i;
-@@ -284,6 +287,7 @@ next:
+@@ -302,6 +305,7 @@ next:
cipher_name(ciphers[i]));
}
}
@@ -45,7 +83,7 @@
if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX] &&
tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX])
-@@ -303,11 +307,13 @@ next:
+@@ -321,11 +325,13 @@ next:
printf("\t\t * %s\n", iftype_name(nla_type(nl_mode)));
}
@@ -59,7 +97,7 @@
if (tb_msg[NL80211_ATTR_INTERFACE_COMBINATIONS]) {
struct nlattr *nl_combi;
-@@ -404,6 +410,7 @@ broken_combination:
+@@ -422,6 +428,7 @@ broken_combination:
printf("\tinterface combinations are not supported\n");
}
@@ -67,7 +105,7 @@
if (tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS]) {
printf("\tSupported commands:\n");
nla_for_each_nested(nl_cmd, tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS], rem_cmd)
-@@ -496,6 +503,7 @@ broken_combination:
+@@ -518,6 +525,7 @@ broken_combination:
printf("\t\t * wake up on TCP connection\n");
}
}
@@ -75,7 +113,7 @@
if (tb_msg[NL80211_ATTR_ROAM_SUPPORT])
printf("\tDevice supports roaming.\n");
-@@ -532,6 +540,7 @@ broken_combination:
+@@ -554,6 +562,7 @@ broken_combination:
}
}
@@ -83,23 +121,23 @@
if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) {
unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]);
-@@ -584,6 +593,7 @@ broken_combination:
- if (features & NL80211_FEATURE_DYNAMIC_SMPS)
- printf("\tDevice supports dynamic SMPS\n");
+@@ -612,6 +621,7 @@ broken_combination:
+ if (features & NL80211_FEATURE_TDLS_CHANNEL_SWITCH)
+ printf("\tDevice supports TDLS channel switching\n");
}
+#endif
- if (tb_msg[NL80211_ATTR_TDLS_SUPPORT])
- printf("\tDevice supports T-DLS.\n");
-@@ -633,6 +643,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
+ if (tb_msg[NL80211_ATTR_EXT_FEATURES]) {
+ struct nlattr *tb = tb_msg[NL80211_ATTR_EXT_FEATURES];
+@@ -668,6 +678,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP
"List all wireless devices and their capabilities.");
TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL);
+#if 0
- static int handle_commands(struct nl80211_state *state,
- struct nl_cb *cb, struct nl_msg *msg,
+ static int handle_commands(struct nl80211_state *state, struct nl_msg *msg,
int argc, char **argv, enum id_input id)
-@@ -645,6 +656,7 @@ static int handle_commands(struct nl8021
+ {
+@@ -679,6 +690,7 @@ static int handle_commands(struct nl8021
}
TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands,
"list all known commands and their decimal & hex value");
@@ -107,3 +145,111 @@
static int print_feature_handler(struct nl_msg *msg, void *arg)
{
+--- a/scan.c
++++ b/scan.c
+@@ -1081,6 +1081,7 @@ static void print_ht_op(const uint8_t ty
+ printf("\t\t * secondary channel offset: %s\n",
+ ht_secondary_offset[data[1] & 0x3]);
+ printf("\t\t * STA channel width: %s\n", sta_chan_width[(data[1] & 0x4)>>2]);
++ return;
+ printf("\t\t * RIFS: %d\n", (data[1] & 0x8)>>3);
+ printf("\t\t * HT protection: %s\n", protection[data[2] & 0x3]);
+ printf("\t\t * non-GF present: %d\n", (data[2] & 0x4) >> 2);
+@@ -1312,6 +1313,13 @@ static void print_ie(const struct ie_pri
+
+ static const struct ie_print ieprinters[] = {
+ [0] = { "SSID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
++ [45] = { "HT capabilities", print_ht_capa, 26, 26, BIT(PRINT_SCAN), },
++ [48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), },
++ [61] = { "HT operation", print_ht_op, 22, 22, BIT(PRINT_SCAN), },
++ [62] = { "Secondary Channel Offset", print_secchan_offs, 1, 1, BIT(PRINT_SCAN), },
++ [191] = { "VHT capabilities", print_vht_capa, 12, 255, BIT(PRINT_SCAN), },
++ [192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), },
++#if 0
+ [1] = { "Supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
+ [3] = { "DS Parameter set", print_ds, 1, 1, BIT(PRINT_SCAN), },
+ [5] = { "TIM", print_tim, 4, 255, BIT(PRINT_SCAN), },
+@@ -1321,14 +1329,8 @@ static const struct ie_print ieprinters[
+ [32] = { "Power constraint", print_powerconstraint, 1, 1, BIT(PRINT_SCAN), },
+ [35] = { "TPC report", print_tpcreport, 2, 2, BIT(PRINT_SCAN), },
+ [42] = { "ERP", print_erp, 1, 255, BIT(PRINT_SCAN), },
+- [45] = { "HT capabilities", print_ht_capa, 26, 26, BIT(PRINT_SCAN), },
+ [47] = { "ERP D4.0", print_erp, 1, 255, BIT(PRINT_SCAN), },
+ [74] = { "Overlapping BSS scan params", print_obss_scan_params, 14, 255, BIT(PRINT_SCAN), },
+- [61] = { "HT operation", print_ht_op, 22, 22, BIT(PRINT_SCAN), },
+- [62] = { "Secondary Channel Offset", print_secchan_offs, 1, 1, BIT(PRINT_SCAN), },
+- [191] = { "VHT capabilities", print_vht_capa, 12, 255, BIT(PRINT_SCAN), },
+- [192] = { "VHT operation", print_vht_oper, 5, 255, BIT(PRINT_SCAN), },
+- [48] = { "RSN", print_rsn, 2, 255, BIT(PRINT_SCAN), },
+ [50] = { "Extended supported rates", print_supprates, 0, 255, BIT(PRINT_SCAN), },
+ [113] = { "MESH Configuration", print_mesh_conf, 7, 7, BIT(PRINT_SCAN), },
+ [114] = { "MESH ID", print_ssid, 0, 32, BIT(PRINT_SCAN) | BIT(PRINT_LINK), },
+@@ -1336,6 +1338,7 @@ static const struct ie_print ieprinters[
+ [107] = { "802.11u Interworking", print_interworking, 0, 255, BIT(PRINT_SCAN), },
+ [108] = { "802.11u Advertisement", print_11u_advert, 0, 255, BIT(PRINT_SCAN), },
+ [111] = { "802.11u Roaming Consortium", print_11u_rcon, 0, 255, BIT(PRINT_SCAN), },
++#endif
+ };
+
+ static void print_wifi_wpa(const uint8_t type, uint8_t len, const uint8_t *data)
+@@ -1767,6 +1770,7 @@ void print_ies(unsigned char *ie, int ie
+ ieprinters[ie[0]].name &&
+ ieprinters[ie[0]].flags & BIT(ptype)) {
+ print_ie(&ieprinters[ie[0]], ie[0], ie[1], ie + 2);
++#if 0
+ } else if (ie[0] == 221 /* vendor */) {
+ print_vendor(ie[1], ie + 2, unknown, ptype);
+ } else if (unknown) {
+@@ -1776,6 +1780,7 @@ void print_ies(unsigned char *ie, int ie
+ for (i=0; i<ie[1]; i++)
+ printf(" %.2x", ie[2+i]);
+ printf("\n");
++#endif
+ }
+ ielen -= ie[1] + 2;
+ ie += ie[1] + 2;
+@@ -1816,6 +1821,7 @@ static void print_capa_non_dmg(__u16 cap
+ printf(" ESS");
+ if (capa & WLAN_CAPABILITY_IBSS)
+ printf(" IBSS");
++#if 0
+ if (capa & WLAN_CAPABILITY_CF_POLLABLE)
+ printf(" CfPollable");
+ if (capa & WLAN_CAPABILITY_CF_POLL_REQUEST)
+@@ -1844,6 +1850,7 @@ static void print_capa_non_dmg(__u16 cap
+ printf(" DelayedBACK");
+ if (capa & WLAN_CAPABILITY_IMM_BACK)
+ printf(" ImmediateBACK");
++#endif
+ }
+
+ static int print_bss_handler(struct nl_msg *msg, void *arg)
+@@ -1922,8 +1929,10 @@ static int print_bss_handler(struct nl_m
+ if (bss[NL80211_BSS_FREQUENCY]) {
+ int freq = nla_get_u32(bss[NL80211_BSS_FREQUENCY]);
+ printf("\tfreq: %d\n", freq);
++#if 0
+ if (freq > 45000)
+ is_dmg = true;
++#endif
+ }
+ if (bss[NL80211_BSS_BEACON_INTERVAL])
+ printf("\tbeacon interval: %d TUs\n",
+--- a/util.c
++++ b/util.c
+@@ -267,6 +267,7 @@ static const char *commands[NL80211_CMD_
+
+ static char cmdbuf[100];
+
++#if 0
+ const char *command_name(enum nl80211_commands cmd)
+ {
+ if (cmd <= NL80211_CMD_MAX && commands[cmd])
+@@ -274,6 +275,7 @@ const char *command_name(enum nl80211_co
+ sprintf(cmdbuf, "Unknown command (%d)", cmd);
+ return cmdbuf;
+ }
++#endif
+
+ int ieee80211_channel_to_frequency(int chan, enum nl80211_band band)
+ {
diff --git a/package/network/utils/iw/patches/300-display_interface_TX_power.patch b/package/network/utils/iw/patches/300-display_interface_TX_power.patch
new file mode 100644
index 0000000000..574c490318
--- /dev/null
+++ b/package/network/utils/iw/patches/300-display_interface_TX_power.patch
@@ -0,0 +1,32 @@
+From: =?utf-8?q?Rafa=C5=82_Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Tue, 1 Sep 2015 09:55:52 +0200
+Subject: iw: display interface TX power if available
+MIME-Version: 1.0
+Content-Type: text/plain; charset="utf-8"
+Content-Transfer-Encoding: 8bit
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+[print dBm]
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+ interface.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/interface.c b/interface.c
+index 73ccecd..4f0821d 100644
+--- a/interface.c
++++ b/interface.c
+@@ -368,6 +368,13 @@ static int print_iface_handler(struct nl_msg *msg, void *arg)
+ printf("\n");
+ }
+
++ if (tb_msg[NL80211_ATTR_WIPHY_TX_POWER_LEVEL]) {
++ uint32_t txp = nla_get_u32(tb_msg[NL80211_ATTR_WIPHY_TX_POWER_LEVEL]);
++
++ printf("%s\ttxpower %d.%.2d dBm\n",
++ indent, txp / 100, txp % 100);
++ }
++
+ return NL_SKIP;
+ }
+
diff --git a/package/network/utils/iw/patches/301-ibss_add_VHT80.patch b/package/network/utils/iw/patches/301-ibss_add_VHT80.patch
new file mode 100644
index 0000000000..709fbb2914
--- /dev/null
+++ b/package/network/utils/iw/patches/301-ibss_add_VHT80.patch
@@ -0,0 +1,104 @@
+From: "Janusz.Dziedzic@tieto.com" <Janusz.Dziedzic@tieto.com>
+Date: Thu, 10 Sep 2015 12:04:13 +0200
+Subject: ibss: add VHT80 support for IBSS
+
+Add VHT80 support for IBSS.
+
+eg. iw wlan0 ibss join 5180 80MHZ
+ iw wlan0 ibbs join 5220 80MHZ
+
+Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
+[fix formatting]
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+ ibss.c | 49 +++++++++++++++++++++++++++++++++++++++++--------
+ 1 file changed, 41 insertions(+), 8 deletions(-)
+
+diff --git a/ibss.c b/ibss.c
+index 7a0b707..a99a262 100644
+--- a/ibss.c
++++ b/ibss.c
+@@ -16,6 +16,39 @@
+
+ SECTION(ibss);
+
++struct chanmode {
++ const char *name;
++ unsigned int width;
++ int freq1_diff;
++ int chantype; /* for older kernel */
++};
++
++static int get_cf1(const struct chanmode *chanmode, unsigned long freq)
++{
++ int cf1 = freq, j;
++ int vht80[] = { 5180, 5260, 5500, 5580, 5660, 5745 };
++
++ switch (chanmode->width) {
++ case NL80211_CHAN_WIDTH_80:
++ /* setup center_freq1 */
++ for (j = 0; j < ARRAY_SIZE(vht80); j++) {
++ if (freq >= vht80[j] && freq < vht80[j] + 80)
++ break;
++ }
++
++ if (j == ARRAY_SIZE(vht80))
++ break;
++
++ cf1 = vht80[j] + 30;
++ break;
++ default:
++ cf1 = freq + chanmode->freq1_diff;
++ break;
++ }
++
++ return cf1;
++}
++
+ static int join_ibss(struct nl80211_state *state,
+ struct nl_msg *msg,
+ int argc, char **argv,
+@@ -30,12 +63,8 @@ static int join_ibss(struct nl80211_state *state,
+ int bintval;
+ int i;
+ unsigned long freq;
+- static const struct {
+- const char *name;
+- unsigned int width;
+- int freq1_diff;
+- int chantype; /* for older kernel */
+- } *chanmode_selected = NULL, chanmode[] = {
++ const struct chanmode *chanmode_selected = NULL;
++ static const struct chanmode chanmode[] = {
+ { .name = "HT20",
+ .width = NL80211_CHAN_WIDTH_20,
+ .freq1_diff = 0,
+@@ -60,6 +89,10 @@ static int join_ibss(struct nl80211_state *state,
+ .width = NL80211_CHAN_WIDTH_10,
+ .freq1_diff = 0,
+ .chantype = -1 },
++ { .name = "80MHZ",
++ .width = NL80211_CHAN_WIDTH_80,
++ .freq1_diff = 0,
++ .chantype = -1 },
+ };
+
+ if (argc < 2)
+@@ -90,7 +123,7 @@ static int join_ibss(struct nl80211_state *state,
+ NLA_PUT_U32(msg, NL80211_ATTR_CHANNEL_WIDTH,
+ chanmode_selected->width);
+ NLA_PUT_U32(msg, NL80211_ATTR_CENTER_FREQ1,
+- freq + chanmode_selected->freq1_diff);
++ get_cf1(chanmode_selected, freq));
+ if (chanmode_selected->chantype != -1)
+ NLA_PUT_U32(msg,
+ NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+@@ -192,7 +225,7 @@ COMMAND(ibss, leave, NULL,
+ NL80211_CMD_LEAVE_IBSS, 0, CIB_NETDEV, leave_ibss,
+ "Leave the current IBSS cell.");
+ COMMAND(ibss, join,
+- "<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
++ "<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ|80MHZ] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
+ " [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] "
+ "[key d:0:abcde]",
+ NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,
diff --git a/package/network/utils/iw/patches/302-ibss_use_MHz_instead_MHZ.patch b/package/network/utils/iw/patches/302-ibss_use_MHz_instead_MHZ.patch
new file mode 100644
index 0000000000..fc4442792d
--- /dev/null
+++ b/package/network/utils/iw/patches/302-ibss_use_MHz_instead_MHZ.patch
@@ -0,0 +1,41 @@
+From: Johannes Berg <johannes.berg@intel.com>
+Date: Fri, 18 Sep 2015 11:11:38 +0200
+Subject: ibss: use correct "MHz" instead of "MHZ"
+
+Signed-off-by: Johannes Berg <johannes.berg@intel.com>
+---
+ ibss.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+diff --git a/ibss.c b/ibss.c
+index a99a262..23bda70 100644
+--- a/ibss.c
++++ b/ibss.c
+@@ -81,15 +81,15 @@ static int join_ibss(struct nl80211_state *state,
+ .width = NL80211_CHAN_WIDTH_20_NOHT,
+ .freq1_diff = 0,
+ .chantype = NL80211_CHAN_NO_HT },
+- { .name = "5MHZ",
++ { .name = "5MHz",
+ .width = NL80211_CHAN_WIDTH_5,
+ .freq1_diff = 0,
+ .chantype = -1 },
+- { .name = "10MHZ",
++ { .name = "10MHz",
+ .width = NL80211_CHAN_WIDTH_10,
+ .freq1_diff = 0,
+ .chantype = -1 },
+- { .name = "80MHZ",
++ { .name = "80MHz",
+ .width = NL80211_CHAN_WIDTH_80,
+ .freq1_diff = 0,
+ .chantype = -1 },
+@@ -225,7 +225,7 @@ COMMAND(ibss, leave, NULL,
+ NL80211_CMD_LEAVE_IBSS, 0, CIB_NETDEV, leave_ibss,
+ "Leave the current IBSS cell.");
+ COMMAND(ibss, join,
+- "<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT|5MHZ|10MHZ|80MHZ] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
++ "<SSID> <freq in MHz> [HT20|HT40+|HT40-|NOHT|5MHz|10MHz|80MHz] [fixed-freq] [<fixed bssid>] [beacon-interval <TU>]"
+ " [basic-rates <rate in Mbps,rate2,...>] [mcast-rate <rate in Mbps>] "
+ "[key d:0:abcde]",
+ NL80211_CMD_JOIN_IBSS, 0, CIB_NETDEV, join_ibss,
diff --git a/package/network/utils/iw/patches/303-mesh_add_VHT80.patch b/package/network/utils/iw/patches/303-mesh_add_VHT80.patch
new file mode 100644
index 0000000000..fe8dc21a19
--- /dev/null
+++ b/package/network/utils/iw/patches/303-mesh_add_VHT80.patch
@@ -0,0 +1,170 @@
+From: Sven Eckelmann <sven@open-mesh.com>
+Date: Tue, 24 Nov 2015 17:55:22 +0100
+Subject: iw: add VHT80 support for 802.11s
+
+Support next to the non-HT/HT channel widths like HT20 or NOHT also VHT80
+channels during the mesh join
+
+ iw dev mesh0 mesh join "meshnet" freq 5180 80MHz
+
+Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
+---
+ ibss.c | 33 ---------------------------------
+ iw.h | 9 +++++++++
+ mesh.c | 16 ++++++++--------
+ util.c | 26 ++++++++++++++++++++++++++
+ 4 files changed, 43 insertions(+), 41 deletions(-)
+
+diff --git a/ibss.c b/ibss.c
+index 23bda70..ac06fc5 100644
+--- a/ibss.c
++++ b/ibss.c
+@@ -16,39 +16,6 @@
+
+ SECTION(ibss);
+
+-struct chanmode {
+- const char *name;
+- unsigned int width;
+- int freq1_diff;
+- int chantype; /* for older kernel */
+-};
+-
+-static int get_cf1(const struct chanmode *chanmode, unsigned long freq)
+-{
+- int cf1 = freq, j;
+- int vht80[] = { 5180, 5260, 5500, 5580, 5660, 5745 };
+-
+- switch (chanmode->width) {
+- case NL80211_CHAN_WIDTH_80:
+- /* setup center_freq1 */
+- for (j = 0; j < ARRAY_SIZE(vht80); j++) {
+- if (freq >= vht80[j] && freq < vht80[j] + 80)
+- break;
+- }
+-
+- if (j == ARRAY_SIZE(vht80))
+- break;
+-
+- cf1 = vht80[j] + 30;
+- break;
+- default:
+- cf1 = freq + chanmode->freq1_diff;
+- break;
+- }
+-
+- return cf1;
+-}
+-
+ static int join_ibss(struct nl80211_state *state,
+ struct nl_msg *msg,
+ int argc, char **argv,
+diff --git a/iw.h b/iw.h
+index cef9da8..8e1a37a 100644
+--- a/iw.h
++++ b/iw.h
+@@ -59,6 +59,13 @@ struct cmd {
+ const struct cmd *parent;
+ };
+
++struct chanmode {
++ const char *name;
++ unsigned int width;
++ int freq1_diff;
++ int chantype; /* for older kernel */
++};
++
+ #define ARRAY_SIZE(ar) (sizeof(ar)/sizeof(ar[0]))
+ #define DIV_ROUND_UP(x, y) (((x) + (y - 1)) / (y))
+
+@@ -174,6 +181,8 @@ void print_ies(unsigned char *ie, int ielen, bool unknown,
+ void parse_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen);
+ void iw_hexdump(const char *prefix, const __u8 *data, size_t len);
+
++int get_cf1(const struct chanmode *chanmode, unsigned long freq);
++
+ #define SCHED_SCAN_OPTIONS "interval <in_msecs> [delay <in_secs>] " \
+ "[freqs <freq>+] [matches [ssid <ssid>]+]] [active [ssid <ssid>]+|passive] [randomise[=<addr>/<mask>]]"
+ int parse_sched_scan(struct nl_msg *msg, int *argc, char ***argv);
+diff --git a/mesh.c b/mesh.c
+index 0090530..930d58f 100644
+--- a/mesh.c
++++ b/mesh.c
+@@ -439,12 +439,8 @@ static int join_mesh(struct nl80211_state *state,
+ int bintval, dtim_period, i, n_rates = 0;
+ char *end, *value = NULL, *sptr = NULL;
+ unsigned long freq = 0;
+- static const struct {
+- const char *name;
+- unsigned int width;
+- int freq1_diff;
+- int chantype; /* for older kernel */
+- } *chanmode_selected = NULL, chanmode[] = {
++ const struct chanmode *chanmode_selected = NULL;
++ static const struct chanmode chanmode[] = {
+ { .name = "HT20",
+ .width = NL80211_CHAN_WIDTH_20,
+ .freq1_diff = 0,
+@@ -461,6 +457,10 @@ static int join_mesh(struct nl80211_state *state,
+ .width = NL80211_CHAN_WIDTH_20_NOHT,
+ .freq1_diff = 0,
+ .chantype = NL80211_CHAN_NO_HT },
++ { .name = "80MHz",
++ .width = NL80211_CHAN_WIDTH_80,
++ .freq1_diff = 0,
++ .chantype = -1 },
+ };
+
+ if (argc < 1)
+@@ -497,7 +497,7 @@ static int join_mesh(struct nl80211_state *state,
+ NLA_PUT_U32(msg, NL80211_ATTR_CHANNEL_WIDTH,
+ chanmode_selected->width);
+ NLA_PUT_U32(msg, NL80211_ATTR_CENTER_FREQ1,
+- freq + chanmode_selected->freq1_diff);
++ get_cf1(chanmode_selected, freq));
+ if (chanmode_selected->chantype != -1)
+ NLA_PUT_U32(msg,
+ NL80211_ATTR_WIPHY_CHANNEL_TYPE,
+@@ -599,7 +599,7 @@ static int join_mesh(struct nl80211_state *state,
+ nla_put_failure:
+ return -ENOBUFS;
+ }
+-COMMAND(mesh, join, "<mesh ID> [[freq <freq in MHz> <HT20|HT40+|HT40-|NOHT>]"
++COMMAND(mesh, join, "<mesh ID> [[freq <freq in MHz> <HT20|HT40+|HT40-|NOHT|80MHz>]"
+ " [basic-rates <rate in Mbps,rate2,...>]], [mcast-rate <rate in Mbps>]"
+ " [beacon-interval <time in TUs>] [dtim-period <value>]"
+ " [vendor_sync on|off] [<param>=<value>]*",
+diff --git a/util.c b/util.c
+index 4efc4c8..d75ffe0 100644
+--- a/util.c
++++ b/util.c
+@@ -728,3 +728,29 @@ void iw_hexdump(const char *prefix, const __u8 *buf, size_t size)
+ }
+ printf("\n\n");
+ }
++
++int get_cf1(const struct chanmode *chanmode, unsigned long freq)
++{
++ int cf1 = freq, j;
++ int vht80[] = { 5180, 5260, 5500, 5580, 5660, 5745 };
++
++ switch (chanmode->width) {
++ case NL80211_CHAN_WIDTH_80:
++ /* setup center_freq1 */
++ for (j = 0; j < ARRAY_SIZE(vht80); j++) {
++ if (freq >= vht80[j] && freq < vht80[j] + 80)
++ break;
++ }
++
++ if (j == ARRAY_SIZE(vht80))
++ break;
++
++ cf1 = vht80[j] + 30;
++ break;
++ default:
++ cf1 = freq + chanmode->freq1_diff;
++ break;
++ }
++
++ return cf1;
++}
--
cgit v1.2.3