From 30a2da99a1080ab2e55bf8d0531bd5c6703a179d Mon Sep 17 00:00:00 2001
From: Gabor Juhos <juhosg@openwrt.org>
Date: Wed, 24 Feb 2010 13:39:18 +0000
Subject: ar71xx: register RTL8366RB switch on the TL-WR1043NB board
Thanks to Andrew Tarabaras.
SVN-Revision: 19839
---
.../files/arch/mips/ar71xx/mach-tl-wr1043nd.c | 25 +++++++++++++++++++---
1 file changed, 22 insertions(+), 3 deletions(-)
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
index 15dc7529c3..fd8e5fce8d 100644
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c
@@ -10,7 +10,8 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-
+#include <linux/platform_device.h>
+#include <linux/rtl8366rb.h>
#include <asm/mach-ar71xx/ar71xx.h>
#include "machtype.h"
@@ -29,6 +30,9 @@
#define TL_WR1043ND_GPIO_BTN_RESET 3
#define TL_WR1043ND_GPIO_BTN_QSS 7
+#define TL_WR1043ND_GPIO_RTL8366_SDA 18
+#define TL_WR1043ND_GPIO_RTL8366_SCK 19
+
#define TL_WR1043ND_BUTTONS_POLL_INTERVAL 20
#ifdef CONFIG_MTD_PARTITIONS
@@ -104,6 +108,19 @@ static struct gpio_button tl_wr1043nd_gpio_buttons[] __initdata = {
}
};
+static struct rtl8366rb_platform_data tl_wr1043nd_rtl8366rb_data = {
+ .gpio_sda = TL_WR1043ND_GPIO_RTL8366_SDA,
+ .gpio_sck = TL_WR1043ND_GPIO_RTL8366_SCK,
+};
+
+static struct platform_device tl_wr1043nd_rtl8366rb_device = {
+ .name = RTL8366RB_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &tl_wr1043nd_rtl8366rb_data,
+ }
+};
+
static void __init tl_wr1043nd_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
@@ -111,8 +128,7 @@ static void __init tl_wr1043nd_setup(void)
ar71xx_set_mac_base(mac);
- ar71xx_add_device_mdio(0x0);
-
+ ar71xx_eth0_data.mii_bus_dev = &tl_wr1043nd_rtl8366rb_device.dev;
ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ar71xx_eth0_data.phy_mask = 0x0;
ar71xx_eth0_data.speed = SPEED_1000;
@@ -128,9 +144,12 @@ static void __init tl_wr1043nd_setup(void)
ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr1043nd_leds_gpio),
tl_wr1043nd_leds_gpio);
+ platform_device_register(&tl_wr1043nd_rtl8366rb_device);
+
ar71xx_add_device_gpio_buttons(-1, TL_WR1043ND_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(tl_wr1043nd_gpio_buttons),
tl_wr1043nd_gpio_buttons);
+
ar913x_add_device_wmac(eeprom, mac);
}
--
cgit v1.2.3