aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* mpc85xx: drop empty patch as it backported to LTS kernel 5.15.70Josef Schlehofer2022-12-241-0/+0
| | | | | | | | | This patch is part of Linux kernel 5.15.70, the content was removed, but the empty file is still being carried over the repository, so remove it once for all Fixes: e1b009c ("kernel: bump 5.15 to 5.15.70") Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* realtek: 5.15: Fix incorrect switch patchesOlliver Schinagl2022-12-241-0/+53
| | | | | | | | | Add correct header to patche(s) to be correctly used by git am and have better tracking of it. See commit f1f97db627b2 ("realtek: Convert incorrect v5.10 patches"). Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* realtek: 5.10: Fix incorrect switch patchesOlliver Schinagl2022-12-241-0/+53
| | | | | | | | | Add correct header to patche(s) to be correctly used by git am and have better tracking of it. See commit f1f97db627b2 ("realtek: Convert incorrect v5.10 patches"). Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* omap: add generic subtargetChristian Marangi2022-12-232-0/+2
| | | | | | | Same game as for 853e4dd3062df7cb5704b15d6af6730e3194b571. Add generic to the filenames. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* pistachio: add generic subtargetChristian Marangi2022-12-232-0/+2
| | | | | | | Same game as for 853e4dd3062df7cb5704b15d6af6730e3194b571. Add generic to the filenames. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* octeontx: add generic subtargetChristian Marangi2022-12-232-0/+2
| | | | | | | Same game as for 853e4dd3062df7cb5704b15d6af6730e3194b571. Add generic to the filenames. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* tegra: add generic subtargetChristian Marangi2022-12-232-0/+2
| | | | | | | Same game as for 853e4dd3062df7cb5704b15d6af6730e3194b571. Add generic to the filenames. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* zynq: add generic subtargetChristian Marangi2022-12-232-0/+2
| | | | | | | Same game as for 853e4dd3062df7cb5704b15d6af6730e3194b571. Add generic to the filenames. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mxs: add generic subtargetChristian Marangi2022-12-232-0/+2
| | | | | | | Same game as for 853e4dd3062df7cb5704b15d6af6730e3194b571. Add generic to the filenames. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* kirkwood: add generic subtargetChristian Marangi2022-12-232-0/+2
| | | | | | | Same game as for 853e4dd3062df7cb5704b15d6af6730e3194b571. Add generic to the filenames. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* gemini: add generic subtargetChristian Marangi2022-12-232-0/+2
| | | | | | | Same game as for 853e4dd3062df7cb5704b15d6af6730e3194b571. Add generic to the filenames. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ath25: add generic subtargetChristian Marangi2022-12-232-0/+2
| | | | | | | Same game as for 853e4dd3062df7cb5704b15d6af6730e3194b571. Add generic to the filenames. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ramips: Fix drivers/pwm/pwm-mediatek-ramips.c compileHauke Mehrtens2022-12-231-2/+4
| | | | | | | The pwmchip_remove() function returns void now. Fix a compile problem in the drivers/pwm/pwm-mediatek-ramips.c driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Move CONFIG_PWM_IMG and CONFIG_PWM_MEDIATEK to generic configurationHauke Mehrtens2022-12-233-1/+4
| | | | | | | In the build of the ramips/mt76x8 target the user gets asked about these two configuration options, add them to the generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Move CONFIG_DRM_XEN_FRONTEND to generic configurationHauke Mehrtens2022-12-233-2/+1
| | | | | | | The CONFIG_DRM_XEN_FRONTEND configuration symbol is also used by the layerscape target, move it to the generic kernel configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Add missing kernel configuration optionsHauke Mehrtens2022-12-216-4/+6
| | | | | | This fixes compile of the bmips target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: Reorder kernel configuration optionsHauke Mehrtens2022-12-212-3/+3
| | | | | | | | | | ./scripts/kconfig.pl '+' target/linux/generic/config-5.10 /dev/null > target/linux/generic/config-5.10-new mv target/linux/generic/config-5.10-new target/linux/generic/config-5.10 ./scripts/kconfig.pl '+' target/linux/generic/config-5.15 /dev/null > target/linux/generic/config-5.15-new mv target/linux/generic/config-5.15-new target/linux/generic/config-5.15 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "Revert "mvebu: switch default kernel to 5.15""Petr Štetiar2022-12-201-2/+1
| | | | | | | | This reverts commit 97c77fff28cf001399f33c7bc1ec6687ba18450b as commit 8be6350f6646 ("generic: 5.15: allow MV88E6xxx built-in when PTP support disabled") contains the fix, so lets enable kernel 5.15 on mvebu again. Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: bump 5.15 to 5.15.84John Audia2022-12-191-1/+1
| | | | | | | | | | All patches automatically rebased Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <therealgraysky@proton.me>
* ath79: image: don't depend on other COMPILE targetsAlexander Couzens2022-12-191-1/+1
| | | | | | | | | A device COMPILE target should not depend on another COMPILE. Otherwise race condition may happen. The loader is very small. Compiling it twice shouldn't have a huge impact. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ramips: add support for Linksys E5400 and clonesJulien Dusser2022-12-183-0/+185
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Linksys E5400 is a 2.4/5GHz dual band AC router, based on MediaTek MT7628AN. This device is also sold as Linksys E2500v4, E5300 and E5350 with the same hardware, but software speed limitations in vendor firmwares. Specification: * SoC: MT7628AN (580 MHz) * RAM: DDR2 64 MiB * Flash: 16 MiB NOR (W25Q128BV) * Wi-Fi: * 2.4GHz: SoC Built-in * 5GHz: MT7612EN * Ethernet: 5x 100Mbps * Switch: SoC built-in * UART: * 115200, 8N1, 3.3V (real u-boot speed: 119050) * Pinout JB4: 1:[3V3] (TXD) (RXD) [NC] (GND) Flash Layout: 0x0000000-0x0030000 : "Bootloader" 0x0030000-0x0040000 : "Config" 0x0040000-0x0050000 : "Factory" 0x0050000-0x0ff0000 : "Kernel" 0x0ff0000-0x1000000 : "CBTinfo" MAC address: LAN: factory 0x28 WAN: LAN + 1 2.4G: LAN + 2 5G: LAN + 3 Installation: 1. Connect to UART, use LF as EOL (not CRLF) 2. Set IP address - Press 4 during boot - setenv serverip <TFTPSERVER_IP> - setenv ipaddr <DEVICE_IP> - setenv bootfile openwrt-ramips-mt76x8-linksys_e5400-initramfs-kernel.bin - saveenv - reset 3. Load Openwrt Kernel image from TFTP: - Press 1 during boot - IP and filename should be already set 4. Boot into OpenWrt and perform sysupgrade with sysupgrade image. Signed-off-by: Julien Dusser <julien.dusser@free.fr>
* generic: 5.15: allow MV88E6xxx built-in when PTP support disabledJohnny S. Lee2022-12-181-0/+44
| | | | | | | | | | | | As described in commit 97c77fff28cf001399f33c7bc1ec6687ba18450b MV88E6xxx driver (NET_DSA_MV88E6XXX) cannot be built-in when PTP (PTP_1588_CLOCK) is a module in Linux 5.15. But actually it should be allowed to be built-in when its PTP support (NET_DSA_MV88E6XXX_PTP) is disabled. This adds a patch to fix that. Signed-off-by: Johnny S. Lee <foss@jsl.io>
* ramips: add support for SNR-CPE-W4N-MT routerAlexey Bartenev2022-12-174-0/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | General specification: - SoC Type: MediaTek MT7620N (580MHz) - ROM: 8 MB SPI-NOR (W25Q64FV) - RAM: 64 MB DDR (M13S5121632A) - Switch: MediaTek MT7530 - Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4) - Wireless 2.4 GHz: b/g/n - Buttons: 1 button (RESET) - Bootloader: U-Boot 1.1.3, MediaTek U-Boot: 5.0.0.5 - Power: 12 VDC, 1.0 A Flash by the native uploader in 2 stages: 1. Use the native uploader to flash an initramfs image. Choose openwrt-ramips-mt7620-snr_cpe-w4n-mt-initramfs-kernel.bin file by "Administration/Management/Firmware update/Choose File" in vendor's web interface (ip: 192.168.1.10, login: Admin, password: Admin). Wait ~160 seconds. 2. Flash a sysupgrade image via the initramfs image. Choose openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin file by "System/Backup/Flash Firmware/Flash image..." in LuCI web interface (ip: 192.168.1.1, login: root, no password). Wait ~240 seconds. Flash by U-Boot TFTP method: 1. Configure your PC with IP 192.168.1.131 2. Set up TFTP server and put the openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin image on your PC 3. Connect serial port (57600 8N1) and turn on the router. Then interrupt "U-Boot Boot Menu" by hitting 2 key (select "2: Load system code then write to Flash via TFTP."). Press Y key when show "Warning!! Erase Linux in Flash then burn new one. Are you sure? (Y/N)" Input device IP (192.168.1.1) ==:192.168.1.1 Input server IP (192.168.1.131) ==:192.168.1.131 Input Linux Kernel filename () ==: openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin 3. Wait ~120 seconds to complete flashing Signed-off-by: Alexey Bartenev <41exey@proton.me>
* ath79: add support for KuWFi C910Davide Fioravanti2022-12-174-0/+220
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | KuWFi C910 is an 802.11n (300N) indoor router with LTE support. I can't find anywhere the OEM firmware. So if you want to restore the original firmware you must do a dump before the OpenWrt flash. According to the U-Boot, the board name is Iyunlink MINI_V2. Hardware -------- SoC: Qualcomm QCA9533 650/400/200/25/25 MHz (CPU/RAM/AHB/SPI/REF) RAM: 128 MB DDR2 16-bit CL3-4-4-10 (Nanya NT5TU64M16HG-AC) FLASH: 16 MB Winbond W25Q128 ETH: - 2x 100M LAN (QCA9533 internal AR8229 switch, eth0) - 1x 100M WAN (QCA9533 internal PHY, eth1) WIFI: - 2.4GHz: 1x QCA9533 2T2R (b/g/n) - 2 external non detachable antennas (near the power barrel side) LTE: - Quectel EC200T-EU (or -CN or -AU depending on markets) - 2 external non detachable antennas (near the sim slot side) BTN: - 1x Reset button LEDS: - 5x White leds (Power, Wifi, Wan, Lan1, Lan2) - 1x RGB led (Internet) UART: 115200-8-N-1 (Starting from lan ports in order: GND, RX, TX, VCC) Everything works correctly. MAC Addresses ------------- LAN XX:XX:XX:XX:XX:48 (art@0x1002) WAN XX:XX:XX:XX:XX:49 (art@0x1002 + 1) WIFI XX:XX:XX:XX:XX:48 LABEL XX:XX:XX:XX:XX:48 Installation ------------ Turn the router on while pressing the reset button for 4 seconds. You can simply count the flashes of the first lan led. (See notes) If done correctly you should see the first lan led glowing slowly and you should be able to enter the U-Boot web interface. Click on the second tab ("固件") and select the -factory.bin firmware then click "Update firmware". A screen "Update in progress" should appear. After few minutes the flash should be completed. This procedure can be used also to recover the router in case of soft brick. Backup the original firmware ---------------------------- The following steps are intended for a linux pc. However using the right software this guide should also work for Windows and MacOS. 1) Install a tftp server on your pc. For example tftpd-hpa. 2) Create two empty files in your tftp folder called: kuwfi_c910_all_nor.bin kuwfi_c910_firmware_only.bin 3) Give global write permissions to these files: chmod 666 kuwfi_c910_all_nor.bin chmod 666 kuwfi_c910_firmware_only.bin 4) Start a netcat session on your pc with this command: nc -u -p 6666 192.168.1.1 6666 5) Set the static address on your pc: 192.168.1.2. Connect the router to your pc. 6) Turn the router on while pressing the reset button for 8-9 seconds. You can simply count the flashes of the first lan led. If you press the reset button for too many seconds it will continue the normal boot, so you have to restart the router. (See notes) 7) If done correctly you should see the U-Boot network console and you should see the following lines on the netcat session: Version and build date: U-Boot 1.1.4-55f1bca8-dirty, 2020-05-07 Modification by: Piotr Dymacz <piotr@dymacz.pl> https://github.com/pepe2k/u-boot_mod u-boot> 8) Start the transfer of the whole NOR: tftpput 0x9f000000 0x1000000 kuwfi_c910_all_nor.bin 9) The router should start the transfer and it should end with a message like this (pay attention to the bytes transferred): TFTP transfer complete! Bytes transferred: 16777216 (0x1000000) 10) Repeat the same transfer for the firmware: tftpput 0x9f050000 0xfa0000 kuwfi_c910_firmware_only.bin 11) The router should start the transfer and it should end with a message like this (pay attention to the bytes transferred): TFTP transfer complete! Bytes transferred: 16384000 (0xfa0000) 12) Now you have the backup for the whole nor and for the firmware partition. If you want to restore the OEM firmware from OpenWrt you have to flash the kuwfi_c910_firmware_only.bin from the U-Boot web interface. WARNING: Don't use the kuwfi_c910_all_nor.bin file. This file is only useful if you manage to hard brick the router or you damage the art partition (ask on the forum) Notes ----- This router (or at least my unit) has the pepe2k's U-Boot. It's a modded U-Boot version with a lot of cool features. You can read more here: https://github.com/pepe2k/u-boot_mod With this version of U-Boot, pushing the reset button while turning on the router starts different tools: - 3-5 seconds: U-Boot web interface that can be used to replace the firmware, the art or the U-Boot itself - 5-7 seconds: U-Boot uart console - 7-10 seconds: U-Boot network console - 11+ seconds: Normal boot The LTE modem can be used in cdc_ether (ECM) or RNDIS mode. The default mode is ECM and in this commit only the ECM software is included. In order to set RNDIS mode you must use this AT command: AT+QCFG="usbnet",3 In order to use again the ECM mode you must use this AT command: AT+QCFG="usbnet",1 Look for "Quectel_EC200T_Linux_USB_Driver_User_Guide_V1.0.pdf" for other AT commands Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* ramips: improve support for SIM SIMAX1800T and Haier HAR-20S2U1Shiji Yang2022-12-172-11/+13
| | | | | | | | | | | | | | 1. Use ARTIFACTS to build factory image. This change allows users to generate initramfs factory image using OpenWrt ImageBuilder. 2. Override the default bootargs property defined in "mt7621.dtsi". Although we use the "bootargs-override" property to set bootargs, the default "bootargs" property will still be written into the device tree, so it is better to override it. Tested on SIM SIMAX1800T Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* ramips: improve support for H3C TX180x series devicesShiji Yang2022-12-171-0/+8
| | | | | | | | | | | 1. Explicitly declare gpio pin groups to ensure that gpio works properly. 2. Override bootargs in device tree to avoid modifying u-boot envs during initial installation. Tested on H3C TX1801 Plus Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* sunxi: fix board_name for MarsBoard A10Chukun Pan2022-12-171-9/+10
| | | | | | | The compatible in the device tree is "haoyu,a10-marsboard", modify the board_name to keep it consistent. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* sunxi: fix typo in device packages for MarsBoard A10Chukun Pan2022-12-171-2/+2
| | | | | | | | The kmod prefix for sound-soc-sunxi is missing, fix it. Also add kmod-sound-core as dependence. Fixes: 6a35659 ("sunxi: Added profile for HAOYU Electronics Marsboard A10") Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* ath79: convert WiFis based on ar7241_ubnt_unifi.dtsi to nvmem-cellsNick Hainke2022-12-174-33/+39
| | | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. While working on it remove stale uboot partition label and merge art into partition node. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: convert Buffalo WZR-HP-G302H A1A0 WiFis to nvmem-cellsNick Hainke2022-12-172-15/+15
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: convert OpenMesh OM2P v1 WiFis to nvmem-cellsNick Hainke2022-12-172-19/+19
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: convert OpenMesh OM5P-AN WiFis to nvmem-cellsNick Hainke2022-12-172-20/+21
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: convert boards based on ar9344_openmesh_mr600.dtsi to nvmem-cellsNick Hainke2022-12-172-19/+21
| | | | | | | | | Pull the calibration data from the nvmem subsystem. This allows us to move userspace caldata extraction into the device-tree definition. Merge art into partition node. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: redmi-ax6000: drop cs-gpiosChuanhong Guo2022-12-171-1/+0
| | | | | | | | 'cs-gpios = <0>, <0>' is a hack in ath79 to override the incorrectly specified maximum number of chipselects available in spi-ath79.c. It's not needed here and must have been copied here by mistake. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: add alternative stock layout for Xiaomi Redmi Router AX6000Chen Minqiang2022-12-177-284/+387
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In this implementation, the flash partition layout is adjusted to avoid modifying the uboot environment of mtdparts. This ensures that the 30M ubi_kernel partition remains aligned with the stock ubi partition, and the kernel volume is placed in it. This allows the stock uboot to boot from it without changing the mtdparts, which is useful for reverting back to the stock firmware using Xiaomi Firmware Tools. In actual testing, modifying mtdparts has been found to break Xiaomi Firmware Tools. 1. use ARTIFACTS to generate initramfs-factory.ubi for easy installation. 2. The NAND flash layout is changed to allow for reverting back to the stock firmware. 3. Before performing sysupgrade, do some cleanup in platform_pre_upgrade to ensure a clean installation of OpenWRT. 4. Setup the uboot env to ensure that the system always boot, which can be helpful for users who may forget to do this before sysupgrade in the initramfs. New flash instructions: 1. Gain ssh access. Please refer to: https://openwrt.org/toh/xiaomi/redmi_ax6000#installation) 2. Check which system current u-boot is loading from: COMMAND: `cat /proc/cmdline` sample OUTPUT: `console=ttyS0,115200n1 loglevel=8 firmware=1 uart_en=1` if firmware=1, current system is ubi1 if firmware=0, current system is ubi0 3. Setup nvram and write the firmware: If the current system is ubi1, please set it up so that the next time it will boot from ubi, and write the firmware to ubi: ``` nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=0 nvram set flag_last_success=0 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit ubiformat /dev/mtd8 -y -f /tmp/initramfs-factory.ubi ``` If the current system is ubi, please set it up so that the next time it will boot from ubi1, and write the firmware to ubi1: ``` nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=1 nvram set flag_last_success=1 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit ubiformat /dev/mtd9 -y -f /tmp/initramfs-factory.ubi ``` 4. After rebooting, the system should now boot into the openwrt initramfs. Flash the squashfs-sysupgrade.bin via using ssh or luci. ``` sysupgrade -n /tmp/squashfs-sysupgrade.bin ``` Done. For existing users of the Redmi AX6000 running OpenWrt, here are the steps to switch to this new layout: 1. Flash initramfs-factory.ubi ``` mtd -r -e ubi write /tmp/initramfs-factory.ubi ubi ``` 2. After rebooting, the system will boot into the new openwrt-initramfs. Log in and perform a sysupgrade to complete the process. ``` sysupgrade -n /tmp/squashfs-sysupgrade.bin ``` Signed-off-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* generic: add support for EON EN25QX128A spi nor flashChristian Marangi2022-12-162-0/+42
| | | | | | | | | Add support for EON EN25QX128A spi nor flash with no flags as it does support SFDP parsing. Fixes: #9442 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Tested-by: Szabolcs Hubai <szab.hu@gmail.com> [ramips/mt7621: xiaomi_mi-router-4a-gigabit]
* mediatek: add LED support for Xiaomi Redmi AX6000Furong Xu2022-12-163-0/+55
| | | | | | | add DT nodes and default package for the LEDs on Redmi AX6000 Signed-off-by: Furong Xu <xfr@outlook.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: enable sel_clk for spi-mt65xxFurong Xu2022-12-161-0/+29
| | | | | | | | | Without explicitly enabling sel_clk, clk_disable_unused() will disable it when boot is done, causing CPU hang on SPI1 register access on MT7986. Explicitly enable sel_clk to make SPI1 functional. Signed-off-by: Furong Xu <xfr@outlook.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* realtek: add Linux Kernel 5.15 as testing versionINAGAKI Hiroshi2022-12-151-0/+1
| | | | | | | | | | | | | | | | Add Linux Kernel 5.15 support for testing. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [APRESIA ApresiaLightGS120GT-SS, Panasonic Switch-M24eG PN28240K, Switch-M48eG PN28480K] Tested-by: INAGAKI Hiroshi <musashino.open@gmail.com> TP-Link TL-SG2008P Tested-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> [D-Link DGS-1210-20, DGS-1210-52, Zyxel XGS1010-12] Tested-by: Markus Stockhausen <markus.stockhausen@gmx.de> [Zyxel XGS1250-12] Tested-by: Lucian Cristian <lucian.cristian@gmail.com> # Zyxel [HPE 1920-8G, 1920-48G] Tested-by: Jan Hoffmann <jan@3e8.eu>
* realtek: enable needs_standalone_vlan_filtering on DSA driver in 5.15INAGAKI Hiroshi2022-12-151-0/+1
| | | | | | | To configure VLAN 0, enable needs_standalone_vlan_filtering option of dsa_switch struct. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: update dsa.c of DSA driver for 5.15INAGAKI Hiroshi2022-12-151-101/+88
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - rtl83xx_vlan_filtering() "struct switchdev_trans *trans" parameter was removed[1] and "struct netlink_ext_ack *extack" was added[2]. [1]: https://www.spinics.net/lists/netdev/msg712250.html [2]: https://www.spinics.net/lists/netdev/msg722496.html - rtl83xx_vlan_add/del() vlan->vid_begin and vlan->vid_end were removed and vlan->vid was added[3]. [3]: https://www.spinics.net/lists/netdev/msg712248.html - rtl83xx_vlan_prepare() "port_vlan_prepare" member was removed from "dsa_switch_ops" struct in dsa.h[4] and vlan_prepare function should be called from vlan_add function. Also, change return type of vlan_add function to int. [4]: https://www.spinics.net/lists/netdev/msg712252.html - rtl83xx_port_mdb_add() "port_mdb_prepare" member in "dsa_switch_ops" struct was removed and preparation need to be done in the function of "port_mdb_add" member instead. And also, int type need to be returned on "port_mdb_add" member[5]. [5]: https://www.spinics.net/lists/netdev/msg712251.html - rtl83xx_port_pre_bridge_flags(), rtl83xx_port_bridge_flags() The current "port_pre_bridge_flags" member and "port_bridge_flags" member in "dsa_switch_ops" in dsa.h has flags of "struct switchdev_brport_flags" type instead[6], so adjust to it. And, the changed features are passed by flags.mask[7] in rtl83xx_port_bridge_flags(), so check it before calling function to enable/disable fieature. [6]: https://lore.kernel.org/lkml/20210212151600.3357121-7-olteanv@gmail.com/ [7]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e18f4c18ab5b0dd47caaf8377c2e36d66f632a8c Suggested-by: Markus Stockhausen <markus.stockhausen@gmx.de> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [shorten final return statement of rtl83xx_port_mdb_add()] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: update platform support for 5.15INAGAKI Hiroshi2022-12-152-6/+2
| | | | | | | | | | - fw_passed_dtb and others were replaced to get_fdt() function[1] - __appended_dtb defined by asm/bootinfo.h[2] [1]: https://www.spinics.net/lists/linux-mips/msg03332.html [2]: https://www.spinics.net/lists/linux-mips/msg03332.html Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: refresh config-5.15 in all subtargetsINAGAKI Hiroshi2022-12-154-92/+123
| | | | | | Refresh config-5.15 in all subtargets by kernel_menuconfig. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: refresh patches in 5.15INAGAKI Hiroshi2022-12-1532-126/+121
| | | | | | Adjust patches for kernel 5.15. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: drop patches of upstreamed fix and changes from 5.15INAGAKI Hiroshi2022-12-154-1113/+0
| | | | | | | | | | - 007-5.16-gpio-realtek...: upstreamed on 5.16 and backported to 5.15.3 - 708-brflood-spi.patch : upstreamed - 709-lag-offloading.patch: upstreamed - 713-v5.12-net-dsa-... : upstreamed and some implementations are replaced Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: drop patches of upstreamed drivers from 5.15INAGAKI Hiroshi2022-12-156-1091/+0
| | | | | | | | | | | The following drivers were upstreamed and available on 5.15, so drop from OpenWrt tree. - realtek-otto-gpio (5.13) - realtek-rtl-spi (5.12) - realtek-rtl-intc (5.12) Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* realtek: copy dts/files/patches/configs for 5.15INAGAKI Hiroshi2022-12-15139-0/+39485
| | | | | | | | Copy dts/files/patches/configs from 5.10 to 5.15. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [refresh with updated DGS-1210 dts files] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* ath79: fix dtc warnings in ruckus zf7372Christian Lamparter2022-12-151-0/+4
| | | | | | | |:69.4-14: Warning (reg_format): beamforming-2g-gpio@0:reg: property has invalid length (4 bytes) |:85.4-14: Warning (reg_format): beamforming-5g-gpio@0:reg: property has invalid length (4 bytes) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: fix dtc warnings in eap1750hChristian Lamparter2022-12-151-19/+19
| | | | | | | | | | | | |109.3-19: Warning (reg_format): macaddr@0:reg:property has invalid length (8 bytes) |113.3-24: Warning (reg_format): calibration@1000:reg: property has invalid length (8 bytes) |117.3-24: Warning (reg_format): calibration@5000:reg: property has invalid length (8 bytes) also integrate the art-nodes nodes back into the partition-subnode and change the calibration labels to match what everyone else is doing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* ath79: fix dtc warnings in eap1200hChristian Lamparter2022-12-151-19/+19
| | | | | | | | | | | | |109.3-19: Warning (reg_format): macaddr@0:reg:property has invalid length (8 bytes) |113.3-24: Warning (reg_format): calibration@1000:reg: property has invalid length (8 bytes) |117.3-24: Warning (reg_format): calibration@5000:reg: property has invalid length (8 bytes) also integrate the art-nodes nodes back into the partition-subnode and change the calibration labels to match what everyone else is doing. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 11:13:12 +0000