aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* generic: move GENERIC_PWM symbol into the generic configGabor Juhos2012-09-135-4/+1
| | | | SVN-Revision: 33383
* ar71xx: define NAND controller base address and register size for AR934X/QCA955xGabor Juhos2012-09-122-13/+23
| | | | SVN-Revision: 33382
* ramips/rt305x: add initial support for Rt5350 SoCGabor Juhos2012-09-125-2/+41
| | | | | | | | | | | | | Somehow detecting the RAM size in common/setup.c doesn't work here, it always detects 64M and then crashes on devices with less RAM. Probably using MEMC_REG_SDRAM_CFG1 to know the RAM size is how it could be, for now I use the mem=32M kernel parameter to get stuff working. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33381
* add gpio sysfs entriesHauke Mehrtens2012-09-111-0/+1
| | | | | | This fixes #10256 SVN-Revision: 33369
* ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on QCA955xGabor Juhos2012-09-101-2/+2
| | | | SVN-Revision: 33362
* ar71xx: fix QCA955X_EHCI_SIZEGabor Juhos2012-09-103-3/+3
| | | | SVN-Revision: 33360
* fix ixp4xx_hss build failure (#12162)Florian Fainelli2012-09-101-0/+44
| | | | SVN-Revision: 33356
* fix description of nand/Ath5k profile (#12149)Jo-Philipp Wich2012-09-091-2/+2
| | | | SVN-Revision: 33352
* ar71xx: add initial support for RB2011UAS-2HnDGabor Juhos2012-09-094-1/+82
| | | | SVN-Revision: 33349
* ar71xx: use routerboot_find_tag to find wlan data offset on RB751Gabor Juhos2012-09-095-17/+25
| | | | SVN-Revision: 33348
* ar71xx: add RouterBoot related helper routinesGabor Juhos2012-09-098-18/+145
| | | | SVN-Revision: 33347
* generic add WLAN calibration data ID to routerboot.hGabor Juhos2012-09-091-0/+1
| | | | SVN-Revision: 33346
* ar71xx: define MTD partitions for RB2011Gabor Juhos2012-09-091-1/+42
| | | | SVN-Revision: 33345
* ar71xx: add preliminary support for Mikrotik RB2011LGabor Juhos2012-09-095-1/+153
| | | | | | | | | | | | | This patch adds preliminary support for the Mikrotik RB2011L. The NAND flash is not yet supported, so only the initramfs kernel can be used for now. [juhosg: remove unnecessary PCI/USB related stuff, the board does not use that, update commit message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 33344
* ar71xx: use dynamic clock dividers on the 2nd MDIO of AR934xGabor Juhos2012-09-092-4/+47
| | | | SVN-Revision: 33343
* ar71xx: add dynamic MDIO clock calculationGabor Juhos2012-09-092-8/+66
| | | | SVN-Revision: 33342
* adm5120: move common routerboot definitions into a separate header fileGabor Juhos2012-09-093-92/+108
| | | | | | Those will be used on the ar71xx platform as well. SVN-Revision: 33341
* bcm63xx: fix WPS button polarity for Alice Gate VoIP 2 + WifiJonas Gorski2012-09-096-7/+8
| | | | | | Fixes booting the device with button hotplug enabled (#10785). SVN-Revision: 33340
* ar71xx: use the RLE library for RB751Gabor Juhos2012-09-084-42/+17
| | | | SVN-Revision: 33338
* ar71xx: add library code for RLE decodingGabor Juhos2012-09-082-0/+115
| | | | | | It will be used for the MikroTik boards. SVN-Revision: 33337
* ar71xx: fix CPU/DDR frequency calculation for SRIF PLLs on AR934xGabor Juhos2012-09-0811-32/+238
| | | | SVN-Revision: 33335
* ar71xx: refresh kernel patchesGabor Juhos2012-09-086-17/+11
| | | | SVN-Revision: 33334
* use the recommended ARM I/O accessorsFlorian Fainelli2012-09-089-52/+55
| | | | | | use {read,write}l_relaxed instead of the plain __raw_{read,write}l variants. SVN-Revision: 33330
* dir825b1: Add image for DIR-825-B1 that uses the whole flash (must first be ↵Daniel Dickinson2012-09-068-2/+208
| | | | | | flashed with the 'standard' image) and an image to revert the change to allow reversion to stock firmware. SVN-Revision: 33326
* lantiq: fix sx76x default uci network configurationLuka Perkov2012-09-061-1/+8
| | | | SVN-Revision: 33324
* add some ohci workarounds to make ohci workFlorian Fainelli2012-09-051-0/+64
| | | | SVN-Revision: 33323
* ramips: Add missing andmask to ramips_esw register read for recv_good value.Gabor Juhos2012-09-051-1/+3
| | | | | | | | | | | | | Add missing andmask to ramips_esw register read for recv_good value. Without the mask, recv_bad leaks into the recv_good packet count. Didn't notice the bug before since you don't usually get bad packets, so I only saw it when I was playing with overlength packets earlier... Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33322
* ramips: Use doubletagging to disable ramips_esw vlan by default, it seems ↵Gabor Juhos2012-09-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | more reliable. Use doubletagging to disable ramips_esw vlan by default, it seems more reliable. Daniel Golle found an issue where sometimes (possibly only for RT3352) the default vlan disable method (clearing en_vlan, untag, doubletag and putting all ports into vlan 0) doesn't work and the packets get sent out vlan-tagged with vlan 0. Instead switch to using the doubletagging method (allow doubletagged packets, put all ports into vlan 0 with untag enabled) by default. Unless someone figures out a way to really globally disable vlan for this switch, this seems like the best (most reliable) option. I did some tests regarding maximum packet size and did not see any difference between the two methods, both allow for slightly bigger packets than the ramips_main.c ethernet driver (ping stops going through above "ping -s 1472" (1514 bytes), on the switch packets are recv_good until "ping -s 1490", or about 1532 bytes). Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33321
* add missing kvm_guest kernel optionsJohn Crispin2012-09-051-0/+4
| | | | SVN-Revision: 33319
* ar71xx: use correct fractional dividers for {CPU,DDR}_PLL on AR934xGabor Juhos2012-09-051-0/+49
| | | | SVN-Revision: 33318
* ar71xx: add rssileds to package set in profile for devices which got them.Gabor Juhos2012-09-051-2/+2
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33317
* ramips: add rssileds to package set in profile for devices which got them.Gabor Juhos2012-09-051-1/+1
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33316
* enable CFI command set 0002 FORCE_WORD_WRITEFlorian Fainelli2012-09-031-0/+14
| | | | SVN-Revision: 33315
* pad squashfs imageFlorian Fainelli2012-09-031-0/+4
| | | | SVN-Revision: 33314
* add Generic and dLAN USB Extender profilesFlorian Fainelli2012-09-033-3/+36
| | | | SVN-Revision: 33313
* nuport-mac: disable MAC RX and TX during interface closeFlorian Fainelli2012-09-031-0/+5
| | | | | | Fixes sporadic crashes while reconfiguring the network interface. SVN-Revision: 33312
* Revert "ar71xx: only allow RGMII mode on the 2nd ethernet MAC of the AR7240"Gabor Juhos2012-08-291-8/+1
| | | | | | That was based on assumptions. SVN-Revision: 33310
* ar71xx: all0315n: fix ethernet according to vendor infoGabor Juhos2012-08-291-12/+2
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33309
* ar71xx: add RSSI LEDs of ALL0315N to uci-defaults/ledsGabor Juhos2012-08-291-0/+7
| | | | SVN-Revision: 33308
* ramips: add kmod-usb-ohci to defaults packages in profile of ALL5002Gabor Juhos2012-08-291-1/+1
| | | | SVN-Revision: 33307
* ramips: make built-in switch transparent for ALL0256N and ALL5002Gabor Juhos2012-08-293-3/+6
| | | | | | | | This allows them to transparently communicate with an external VLAN switch. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 33305
* ramips: Power down phy on disabled switch portsGabor Juhos2012-08-291-5/+67
| | | | | | | | | | | | | | Power down phy on disabled switch ports. Haven't measured this myself yet, but according to this http://www.8devices.com/community/viewtopic.php?f=6&t=156 it can save about 300mW of power. [juhosg: fix checkpatch warning] Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33304
* ramips: Add support for 8devices Carambola dev board.Gabor Juhos2012-08-2911-0/+62
| | | | | | | | | | | | Add support for 8devices Carambola dev board. The Carambola is a small RT3050-based development board with two ethernet ports, on-board chip antenna, usb and plenty of accessible gpio ports, sold by 8devices. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33303
* ramips: Rename POC registersGabor Juhos2012-08-291-31/+31
| | | | | | | | | | | | | | | | | | Rename POC registers. The current code uses POC1-POC3. The datasheet uses: POC1: Port Control 0 POC1: Port Control 1 POC2: Port Control 2 So the first POC1 is a typo that should have been POC0, rename the registers to POC0-POC2 accordingly. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33302
* ramips: Minor ramips_esw.c cleanupGabor Juhos2012-08-294-62/+18
| | | | | | | | | | | | Stop handling VLAN setup in the kernel. Removes the obsolete RT305X_ESW_VLAN_CONFIG_BYPASS option I added for WL-351 and add some extra comments. Also removes the en_vlan per-port flag that isn't very useful really, it now is only controlled by the global enable_vlan flag. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33301
* ramips: Add switch setup to uci network defaultsGabor Juhos2012-08-291-1/+26
| | | | | | | | | | | | | | Add switch setup to uci network defaults. The 'lan' attribute is used to decide into which vlan to put the port. Currently 'disable' is never set, but the intention is to use this for devices like the 8devices Carambola, which only has two ports hooked up to the SoC. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33300
* ramips: Add swconfig support to ramips_esw.cGabor Juhos2012-08-292-35/+755
| | | | | | | | | | | | | | | | | | | Add swconfig support to ramips_esw.c This patch adds swconfig support for ramips_esw: Tested on both D-LINK DIR-300 B1 and Sitecom WL-351 (external rtl8366rb on internal port 5). I've made sure that in the enable_vlan=0 case it behaves like a dumb switch, so external switches should work fine with vlans and verified this on the WL-351. The current state shown by swconfig is always read directly from HW registers, new settings only show after 'swconfig dev rt305x set apply'. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33299
* ramips: ramips_esw.c indentation cleanupGabor Juhos2012-08-291-11/+11
| | | | | | | | | | Minor indentation cleanup. Prepare for the main swconfig patch by cleaning up indentation a bit. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 33298
* ar71xx: image: fix Profile name for TL-WA701 (closes #12094)Gabor Juhos2012-08-291-1/+1
| | | | SVN-Revision: 33295
* ar71xx: Buffalo WZR-HP-AG300H LED supportGabor Juhos2012-08-294-0/+114
| | | | | | | | | | | | | | | | | | | An improved LED support for Buffalo WZR-HP-AG300H. There will be two new packages to go with this patch (ar922x-led-fix-hotplug and ar922x-led-fix-init). These packages essentially perform the same task of disabling "JTAG over GPIO pins" function which is currently required for LEDs on AR922x emac GPIO to work, and are both considered a temporary fix that circumvent this problem. [juhosg: add the hotplug script from the proposed ar922x-led-fix-hotplug package to ar71xx/base-files] Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp> SVN-Revision: 33294
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 09:59:13 +0000