aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ipq806x: Archer C2600: fix switch ports numberingBaptiste Jonglez2017-09-141-1/+4
| | | | | | | The order of LAN ports shown in Luci is reversed compared to what is written on the case of the device. Fix the order so that they match. Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* ramips: fix hg255d LED status supportDavid Yang2017-09-131-0/+1
| | | | | | | | Use the green power LED for boot status indication. Source: https://my.oschina.net/osbin/blog/278782 Para 3 Signed-off-by: David Yang <mmyangfl@gmail.com>
* ar71xx: fix MAC addresses on TP-Link TL-WR1043ND v4Matthias Schiffer2017-09-112-2/+3
| | | | | | | | | | The addresses were read from the 'config' partition, which would not always contain the addresses at the same offsets, depending on the stock firmware version used before flashing LEDE. Change this to get the addresses from the 'product-info' partition, which is read-only. Reported-and-tested-by: Andreas Ziegler <ml@andreas-ziegler.de> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: update 4.4 to 4.4.86Kevin Darbyshire-Bryant2017-09-044-7/+7
| | | | | | Refresh patches Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* brcm47xx: refresh Linux 4.4 configRafał Miłecki2017-09-041-8/+8
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport usbport LED trigger driver support for DTRafał Miłecki2017-08-211-0/+106
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: fix of_node handling in LEDs core codeRafał Miłecki2017-08-214-0/+316
| | | | | | | | | This backports fixes for setting of_node and making it possible to read extra info from DT. This was partially fixed by: [PATCH] leds: leds-gpio: Set of_node for created LED devices but it didn't work during initialization. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: update 4.4 to 4.4.83Kevin Darbyshire-Bryant2017-08-1716-60/+42
| | | | | | | | | | | | | | | Refresh patches. Minor update 704-phy-no-genphy-soft-reset.patch which was partially accepted upstream. Compile-tested on ar71xx. Runtime-tested on ar71xx. Fixes the following vulnerabilities: - CVE-2017-7533 (4.4.80) - CVE-2017-1000111 (4.4.82) - CVE-2017-1000112 (4.4.82) Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* bcm53xx: backport DTS commits that setup USB LEDsRafał Miłecki2017-08-173-1/+214
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: fix WHR-1166D WAN portMathias Kresin2017-08-111-1/+1
| | | | | | | | | | | | By adding the ICPlus IP1001 phy driver an already set RGMII delay mode is reset during driver load. Set the rgmii rx delay to fix corrupt/no packages in case the WAN port negotiates to 1000MBit. Fixes: FS#670 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: ArcherC50v1: fix wlan2g MAC addressThibaut VARENE2017-08-061-0/+2
| | | | | | | | | | By default the wlan eprom contains the generic ralink MAC which is not the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses are decremented from the ethernet MAC. This patch fixes the MAC address for wlan2g in line with OFW. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: fix Omnima MiniEMBWiFi imageMathias Kresin2017-08-021-0/+1
| | | | | | | Reference the Omnima MiniEMBWiFi device tree source file in the image build code. Otherwise the dts of the image processed before is used. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: build HuaWei HG255D imageMathias Kresin2017-08-021-0/+7
| | | | | | | The code to build an image was disabled some time ago for unknown reasons albeit the image looks fine. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add missing partitionsMathias Kresin2017-08-022-9/+57
| | | | | | The partitions were lost during migration to device tree. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ralink: fix rcu_sched stalls on mt7621John Crispin2017-08-011-0/+98
| | | | | | | | | | there were 2 bugs *) core1 came up with a bad bogo mips, looks like the clock needed time to stabilize *) HPT frequency was not set making r4k timers not come up properly Backport of 9551d91b1d6 "ralink: fix rcu_sched stalls on mt7621". Signed-off-by: John Crispin <john@phrozen.org>
* ramips: Archer C50v1: fix power ledThibaut VARENE2017-07-292-1/+1
| | | | | | | | | | 01_leds had a workaround for the power led to compensate for the inverted GPIO state. This patch was missing from my previous commit. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> [add the power led default-state which was omitted in the last commit by me] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: Archer C50v1: fix switch port numberingThibaut VARENE2017-07-291-1/+4
| | | | | | | | Luci shows switch ports in wrong order on that device. This patch fixes switch port numbering and matches them to the device silkscreen. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: Archer C50v1: fix LEDs active levelsThibaut VARENE2017-07-291-2/+2
| | | | | | | | | | All LEDs GPIOs are active low on this device. WAN and POWER states were inverted. Add default state for power. Tested on Archer C50v1. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: fix Mercury MAC1200R v2.0 board nameMathias Kresin2017-07-292-1/+2
| | | | | | | | | | | | With d2b6bf141662 ("ramips: fix image validation errors") the board name was changed to fix an image validation error. But this change wasn't applied to all other files using the board name, which broke sysupgrade. Revert this change and use the former board name in the metadata instead. Signed-off-by: Mathias Kresin <dev@kresin.me>
* brcm63xx: add NULL clock fix send upstreamMathias Kresin2017-07-295-5/+53
| | | | | | | | | | Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Fixes: FS#735 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add NULL clock fix send upstreamMathias Kresin2017-07-291-0/+43
| | | | | | | | | | Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Fixes: FS#735 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar7: add NULL clock fix send upstreamMathias Kresin2017-07-292-0/+90
| | | | | | | | Make the behaviour of clk_get_rate consistent with common clk's clk_get_rate by accepting NULL clocks as parameter. Some device drivers rely on this, and will cause an OOPS otherwise. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: update kernel 4.4 to version 4.4.79Hauke Mehrtens2017-07-2862-933/+110
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: DIR-860L-B1 fix switch port numberingThibaut VARENE2017-07-251-1/+4
| | | | | | | | Luci shows switch ports in inverted order on that device. This patch fixes switch port numbering and matches them to the device silkscreen. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
* ramips: fix wps button gpio for DWR-512Giuseppe Lippolis2017-07-251-1/+1
| | | | | | The WPS button is at GPIO#7. Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ramips: DTS: VoCore2 improvements/fixesPaul Wassi2017-07-251-22/+3
| | | | | | | | | | | The VoCore2 features 128MB of RAM, therefore set memory in DTS to 128*1024*1024 = 0x8000000 The board's LED is connected to GND, set it to ACTIVE_HIGH here. Make serial console working again on kernel 4.9 by change of pinmux configuration. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: fix switch port mapping for TP-Link TL-WR74xN/D seriesPiotr Dymacz2017-07-231-1/+1
| | | | | | | | | Backport of ad8c315: "ar71xx: fix switch port mapping for TP-Link TL-WR74xN/D series". Fixes FS#843 Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: add support for ALFA Network AP121FPiotr Dymacz2017-07-2313-0/+143
| | | | | | | | | | | | | | | | | | | | | | | | | | | ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users. Device is based on Atheros AR9331 WiSoC and is running a custom version (updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR1) - 16 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet - 1T1R 2.4 GHz - 1x microSD (optional, on separate PCB) - 3x LED, 1x button, 1x switch - UART header on PCB Flash instruction (under U-Boot web recovery mode): 1. Configure PC with static IP 192.168.1.2/24. 2. Connect PC with RJ45 port, press the reset button, power up device, wait for first blink of all LEDs (indicates network setup), then keep button for 3 following blinks and release it. 3. Open 192.168.1.1 address in your browser and upload sysupgrade image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* imx6: fix DualLite/Solo GW551X board detectionMathias Kresin2017-07-141-1/+1
| | | | | | The model name is a different one in the device tree source file. Signed-off-by: Mathias Kresin <dev@kresin.me>
* x86: add missing kernel config symbols to Geode targetJo-Philipp Wich2017-07-131-0/+2
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* x86: enable ACPI support for the Geode subtargetJo-Philipp Wich2017-07-121-3/+60
| | | | | | | | Backport of 9b940fe "x86: enable ACPI support for the Geode subtarget". Fixes FS#577. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: set US region code for TP-Link TL-WR710N v1 imageMatthias Schiffer2017-07-121-0/+1
| | | | | | | Non-US versions of the TP-Link TL-WR710N v1 don't have a region code so far, so we can just set US unconditionally. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* ramips: fix Xiaomi MiWiFi Nano firmware partition sizeMathias Kresin2017-07-081-1/+1
| | | | | | | | | | Even the commit message of the patch adding support for the MiWiFi Nano says that a 16 MB flash chip is used. Extend the firmware partition to make use of all available flash space. Fixes: FS#622 Signed-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: Fix UBIFS work on Mikrotik RB95x devicesSergey Sergeev2017-07-051-0/+2
| | | | | | | | If nand chip has no NAND_NO_SUBPAGE_WRITE flag on its options ubifs can't use it mtd devices and the kernel crashes with error: __nand_correct_data: uncorrectable ECC error Signed-off-by: Sergey Sergeev <adron@yapic.net>
* lantiq: use img file extension for DGN3500 factory imagesMathias Kresin2017-07-041-5/+5
| | | | | | | | The Netgear UI in basic mode refuses the upgrade file if the the fileextension is not img. The expert/advanced mode accepts any fileextension. Use img to make it work in any case. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: update kernel 4.4 to 4.4.74Stijn Tintel2017-06-2710-29/+29
| | | | | | | | Refresh patches. Compile-tested on ar71xx, octeon. Runtime-tested on ar71xx, octeon. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ipq806x: fixup thermal patchesStijn Tintel2017-06-273-249/+5
| | | | | | | Fix conflict with thermal patches added in c03d4317a6bc891cb4a5e89cbdd77f37c23aff86. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm53xx: include wpad-mini only on devices with (supported) wirelessRafał Miłecki2017-06-262-13/+15
| | | | | | | Don't include wpad-mini when it's useless just like we don't include useless wireless drivers. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: enable Northstar thermal driverRafał Miłecki2017-06-221-0/+5
| | | | | | | It allows monitoring CPU temp and will shutdown system on critical value. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: backport Broadcom thermal driversRafał Miłecki2017-06-225-0/+801
| | | | | | This includes driver for Northstar and for Raspberry Pi. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: fix Phicomm K1S(PSG1208) pinmux小桥2017-06-121-1/+1
| | | | | | Use gpio function for pins with LEDs. Signed-off-by: 小桥 <29551030@qq.com>
* kernel: update kernel 4.4 to 4.4.71Jo-Philipp Wich2017-06-072-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes the following security vulnerabilities: CVE-2017-8890 The inet_csk_clone_lock function in net/ipv4/inet_connection_sock.c in the Linux kernel through 4.10.15 allows attackers to cause a denial of service (double free) or possibly have unspecified other impact by leveraging use of the accept system call. CVE-2017-9074 The IPv6 fragmentation implementation in the Linux kernel through 4.11.1 does not consider that the nexthdr field may be associated with an invalid option, which allows local users to cause a denial of service (out-of-bounds read and BUG) or possibly have unspecified other impact via crafted socket and send system calls. CVE-2017-9075 The sctp_v6_create_accept_sk function in net/sctp/ipv6.c in the Linux kernel through 4.11.1 mishandles inheritance, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls, a related issue to CVE-2017-8890. CVE-2017-9076 The dccp_v6_request_recv_sock function in net/dccp/ipv6.c in the Linux kernel through 4.11.1 mishandles inheritance, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls, a related issue to CVE-2017-8890. CVE-2017-9077 The tcp_v6_syn_recv_sock function in net/ipv6/tcp_ipv6.c in the Linux kernel through 4.11.1 mishandles inheritance, which allows local users to cause a denial of service or possibly have unspecified other impact via crafted system calls, a related issue to CVE-2017-8890. CVE-2017-9242 The __ip6_append_data function in net/ipv6/ip6_output.c in the Linux kernel through 4.11.3 is too late in checking whether an overwrite of an skb data structure may occur, which allows local users to cause a denial of service (system crash) via crafted system calls. Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-8890 Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-9074 Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-9075 Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-9076 Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-9077 Ref: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2017-9242 Ref: https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.71 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Add missing APU1 reference to x86 board.dKristian Evensen2017-06-062-2/+2
| | | | | | | | | | | | x86 board.d only contains a case for the APU2, not the APU1. This causes, for example, network configuration not to be created correctly. Even though the APU1 seems to reaching EOL, there a still a lot of them out there. The APU1 and APU2 is configured in the same way and this patch should also be considered for stable, as the error also exists there. Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
* lantiq: fix broadcasts and vlans in two iface modeMathias Kresin2017-06-031-5/+6
| | | | | | | | | | | | | | | | | The two phy operation mode where one phy is assigned to an interface without lantiq,* device tree property and the other phy is assigned to an interface with the lantiq,wan device property was broken with the multicast package leaks between vlans fixes. Move the multicast packages relevant portmap settings to the condition which handles multicast packages for better readability. Replace the priv->port_map based port_map only for the interface which has the lantiq,switch device tree property set, to allow tagged multicast packages in two phy mode where the lantiq,switch device tree property isn't used. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: select kmod-mt7603 instead of kmod-mt76 for WBMR-300HPDFelix Fietkau2017-06-031-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: use the P2812HNUF* wan port as wanMathias Kresin2017-06-031-1/+1
| | | | | | | The port is labeled as wan and was only used as lan port because of the "tx ring full" issues fixed with 8f02f7c. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: xrx200: use vlan for ethernet wan portMathias Kresin2017-06-034-39/+9
| | | | | | | | | | | | | | | | | | | | | | | Using the lantiq,wan device tree property for one interface node and the lantiq,switch device tree property for another interface node at the same time was never intended/isn't supported at the moment. The property is meant to be used in two phy operation mode where one phy is assigned to an interface without lantiq,* device tree property and the other phy is assigned to an interface with the lantiq,wan device property to have two netdevs. If both properties are used at the same time, the lantiq,wan interface is shown as independent netdev but not able to operate independent. The port needs to be managed via swconfig. These dependency is not obvious and fooled already a lot of users. Add a default WAN vlan for xrx200 devices having an ethernet WAN port and remove the lantiq,wan device tree property. Leave it up to the user to set the ethernet WAN port as default WAN interface or to use this port as additional LAN port. Signed-off-by: Mathias Kresin <dev@kresin.me>
* x86: disable X2APIC support for legacy subtargetsJo-Philipp Wich2017-06-022-0/+2
| | | | | | | | | Explicitely disable X2APIC support on legacy targets since the targeted processor types do not support it anyway there. Fixes FS#285. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: fix Wallys DR344 GPIO-connected LEDs and buttonPiotr Dymacz2017-05-303-10/+33
| | | | | | | | | | | | | | | | | | | | This fixes wrong GPIO numbers for LEDs and button in Wallys DR344 board and sets color of all LEDs to green as the mass production boards have only green one. Actually, DR344 has 6 GPIO-connected LEDs and one button: - GPIO11: status - GPIO12: sig1 - GPIO13: sig2 - GPIO14: sig3 - GPIO15: sig4 - GPIO16: reset button - GPIO17: lan WAN LED is connected directly with AR8035 PHY. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* ar71xx: set GE interface as wan by default in Wallys DR344Piotr Dymacz2017-05-301-1/+1
| | | | | | | This aligns default network interfaces configuration with vendor firmware: GE (eth0) -> wan, FE (eth1) -> lan. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 18:07:12 +0000