aboutsummaryrefslogtreecommitdiffstats
path: root/target
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: seama: fix making factory imagesYousong Zhou2016-06-303-58/+81
| | | | | | | | | | | | | | | | | | | | | | | | | | rootfs part needs to be aligned to erase block size which is passed as the 6th argument to Image/Build/Seama and is now 65536 since commit commit 5119ee9 "ar71xx: fix bogus hardcoded kernel image size for Seama images (fixes #20585)", but $(($(6) - 64)) still assumes that the argument is a limit on kernel partition size, i.e. 1310720, so the generated factory image is wrong in that the kernel will fail to find the rootfs (FlySpray link at [1]) This patch will workaround it with the following steps 1. Calculate the required space for seama header and META data in step 5 2. Pre-padding 64 bytes to lzma-compressed loader 3. Generate correctly padded image-$(2).tmp 4. Strip out the padding 5. Seal it with seama utility While at it convert seama to new build method [1] FS#35 - mynet-n750 factory images don't find root partition, https://bugs.lede-project.org/index.php?do=details&task_id=35 Reported-by: Steven Haigh <netwiz@crc.id.au> Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: unify indentation with 2 whitespacesYousong Zhou2016-06-301-112/+112
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: image: remove duplicate IMAGES definitionYousong Zhou2016-06-301-1/+0
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ar71xx: hiwifi-hc6361: move packages selection to generic.mkYousong Zhou2016-06-302-14/+9
| | | | | | | Remove kmod-crypto-deflate and kmod-ledtrig-gpio as the device works the same by default without them Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* ramips: disable the WP pin on the SDK mmc driverJohn Crispin2016-06-301-0/+21
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: fix pinmux typoJohn Crispin2016-06-301-0/+77
| | | | | Reported-by: Joy Kicer <joykicer@gmail.com> Signed-off-by: John Crispin <john@phrozen.org>
* kernel: Add option to make using filesystem ACL support the defaultDaniel Dickinson2016-06-303-1/+10
| | | | | | | This adds a configuration options that allows to make filesystem ACL support the default in the kernel, except for old nfs. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
* ramips: set correct LAN/WAN MAC addresses on DIR-860L B1Matthias Schiffer2016-06-301-0/+4
| | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Jo-Philipp Wich <jo@mein.io>
* ramips: add button support and make LEDs known to userspace for DIR-860L B1Matthias Schiffer2016-06-303-0/+16
| | | | | Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Jo-Philipp Wich <jo@mein.io>
* ramips: fix fixseama call on first bootMatthias Schiffer2016-06-301-3/+3
| | | | | | | | | | | | | Commit "kernel: mtdsplit: calculate kernel partition precisely for Seama" changed the kernel partition to only contain the kernel itself and not the Seama header. Adjust the fixseama call to match what is used on brcm53xx. This fixes failing to boot a second time after flashing the factory image on the affected devices. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> Reviewed-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: further legacy image build fixesJo-Philipp Wich2016-06-271-1/+6
| | | | | | | - Add missing macro to trigger the generation of 64k padded squashfs images - Revert Zcomax image generation to use the prepared 64k squashfs image Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* Revert "lantiq: enable SMP for XRX200"Felix Fietkau2016-06-271-19/+0
| | | | | | | | | This reverts commit cc3bfdb62f941dff3e2983591c78b6d39ca8d88a. Apparently the ethernet driver is not SMP safe, as reported in https://bugs.lede-project.org/index.php?do=details&task_id=27 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: disable pdata->use_flow_control for QCA9558Felix Fietkau2016-06-271-1/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: rename ethernet pdata->builtin_switch to use_flow_controlFelix Fietkau2016-06-273-8/+8
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: merge profiles into image building codeJo-Philipp Wich2016-06-2759-2503/+959
| | | | | | | | | | | - Remove old style device profiles and convert them to device definitions within the image building code - Fix the legacy build macros for the changed eval depth in the legacy image build wrapper Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: fix missing break in ubi auto-mounting patchHauke Mehrtens2016-06-273-4/+7
| | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Jo-Philipp Wich <jo@mein.io>
* kernel: remove igb: Fix Null-pointer dereference patchHauke Mehrtens2016-06-263-120/+0
| | | | | | | This patch is already included in the Linux mainline kernel since v3.15, remove it from LEDE, see the lines directly before this patch. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: remove full cache flush in fuse_copy_do() for MIPSHauke Mehrtens2016-06-264-97/+1
| | | | | | | | | | | | | | | | | | | | | | | | This patch was introduced in commit r16412 for the brcm47xx target only and then moved to generic in commit r32395. It was initially added because of ticket #5186 and should fix some problems with fuse file systems and MIPS caches. The commit comment in r32395 says that this a generic problem in MIPS CPUs, but does not name any specifics about that. There was a fix added to kernel 2.6.21 in commit commit 7575a49f20 "[MIPS] Implement flush_anon_page()." that should fix this problem, but that was already available before both commits were done to OpenWrt. I just tested fuse with ntfs.3g without this patch on a BCM4704 (BMIPS3300 V0.6) SoC and haven't seen any problems. Someone reported that removing this patch improves some fuse operations by 5 times on some modern MIPS cores. My test was only a simple "dd if=/dev/zero of=/mnt/zero bs=5000" to an USB stick. This patch removes the patch to OpenWrt, because I assume that it is not needed any more and Felix, the orginal author, also thinks so. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: remove one of two patches deactivating broken vdso support on mipsHauke Mehrtens2016-06-261-9/+0
| | | | | | | The patch target/linux/generic/patches-4.4/206-mips-disable-vdso.patch should be sufficient. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update to version 4.4.14Hauke Mehrtens2016-06-2646-1052/+559
| | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14 Some manual changes to target/linux/generic/patches-4.4/610- netfilter_match_bypass_default_checks.patch were needed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "ar71xx: prevent spurious ethernet resets from dma hang check false ↵Felix Fietkau2016-06-262-6/+5
| | | | | | positives" This reverts commit 3d58d7f053eae83b59baf5c8b8a58da78653f605.
* ar71xx: prevent spurious ethernet resets from dma hang check false positivesFelix Fietkau2016-06-262-5/+6
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: enable flow control for ethernet MACs with built-in switchFelix Fietkau2016-06-263-1/+11
| | | | | | | | Should fix LAN speed issues on some devices. This is an updated version of the previously reverted commit with the same name. It improves the check for MACs connected to a built-in switch Signed-off-by: Felix Fietkau <nbd@nbd.name>
* Revert "ar71xx: fix legacy image building"John Crispin2016-06-2359-938/+2492
| | | | | | | | | | | | | | This reverts commit 59e98b27c93d282edb62fad756fd1c1e587c067f. and Revert "ar71xx: merge profiles into image building code" This reverts commit 636089ead6864364798ac988299429d171051c0e. these are still causing issues Signed-off-by: John Crispin <john@phrozen.org>
* ar71xx: fix legacy image buildingJo-Philipp Wich2016-06-241-20/+14
| | | | | | | | | | | | | | | | | | After the conversion from legacy device profiles to the newer profile information embedded in the image building code, the legacy recipes got triggered twice with different eval depths, leading to shell syntax errors when processing certain images. The double processing was caused by the remaining Image/Build macro in legacy.mk which serves as main entry point for the new style image build code in conjunction with the newly introduced LegacyDevice/* macros which caused the legacy image build fallback code to kick in. In order to fix the issue, rework all legacy macros to work under the legacy image build wrapper and remove the Image/Build macro of legacy.mk to prevent legacy profiles getting executed in the context of the new build code. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ar71xx: merge profiles into image building codeJohn Crispin2016-06-2259-2472/+924
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* ramips: add suport for ZBT APE522IIRoger Pueyo Centelles2016-06-226-0/+161
| | | | | | | | | The ZBT APE522II is a dual-radio outdoor CPE based on the MT7620a SoC. It has 64 MB RAM, 8 MB flash, 2 Fast Ethernet ports via internal switch (one with 802.3af 48V PoE support), a 802.11b/g/n SoC 2.4 GHz radio and an 802.11a/n/ac MT7612E-based 5 GHz radio. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* ipq806x: enable ieee80211 phy hotplug and patch macaddressAdrian Panella2016-06-221-0/+23
| | | | | | | | Calibration data for QCA99x0 in this device has bogus macaddress. The data cannot be modified directly, as it breaks checksum control. Instead change the macaddress from phy add hotplug event. Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* squashfs4: use upstream xz compression header formatHauke Mehrtens2016-06-223-75/+0
| | | | | | | | | | | | | | | | | In the upstream kernel and the upstream squashfs4 tools the xz compression header looks the following: struct disk_comp_opts { __le32 dictionary_size; __le32 flags; }; We added some other members and also moved some existing members. Place the members which are already in upstream header at the same position as in that kernel and add our own at the end. The kernel should not have a problem when there are some additional members and just ignore them. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix network in failsafeMathias Kresin2016-06-221-9/+1
| | | | | | | | | | So far the network in failsafe is setup only for one board. Use the eth0 interface as lan interface for all boards for now. If a board has its lan interface(s) on another eth, a special handling based on the board name can be added. Signed-off-by: Mathias Kresin <dev@kresin.me>
* linux: arc: disable kernel unwinding to fix modules loadingAlexey Brodkin2016-06-222-5/+2
| | | | | | | | | | | | | | | | | | | | | With update of binutils for ARC (this is now based on upstream 2.26) we noticed issues with loadable kernel modules. Something like that was happening: --------------------->8------------------- mbcache: unknown relocation: 49 insmod: can't insert './mbcache.ko': invalid module format --------------------->8------------------- More details could be found in that discussion in binutils mailing list: http://thread.gmane.org/gmane.comp.gnu.binutils/74662 As of now the simplest work-around is to disable in-kernel unwinder for now. That will at least allow us to use modules again. Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: John Crispin <john@phrozen.org>
* ipq806x: Fix typo in Qualcomm device namesSven Eckelmann2016-06-221-3/+3
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* lantiq: add support for ARV7506PW11 (Alice/O2 IAD 4421)Oswald Buddenhagen2016-06-225-1/+183
| | | | | | | | | | | | | | | | | | Ethernet, ADSL2+ and LEDs are fully functional. Supporting the two TAE ports and SIP gateway was not attempted. The WiFi is unreliable, due to experimental support for rt35xx family devices by the rt2800pci driver. Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de> [rebase to LEDE HEAD] [switch to normal image instead of brnboot image] [remove not required pinmux child nodes keys, leds, ebu, exin, pci_in and pci_out] [remove switch_rst pinmux child node (no support for hw reset in driver/setting a default GPIO value in DT] [enable usage of the wireless LED] [fixup mac address configuration] Sgned-off-by: Mathias Kresin <dev@kresin.me>
* ar71xx: hiwifi-hc6361: lift size limit on kernel and rootfs partsYousong Zhou2016-06-222-19/+20
| | | | | | | | | | | | | | | | | | | | | | The patch has been run-tested and the relevant dmsg logs are as the following [ 0.762447] Creating 5 MTD partitions on "spi0.0": [ 0.767217] 0x000000000000-0x000000010000 : "u-boot" [ 0.775139] 0x000000010000-0x000000020000 : "bdinfo" [ 0.781014] 0x000000020000-0x000000fe0000 : "firmware" [ 0.810558] 2 uimage-fw partitions found on MTD device firmware [ 0.815043] 0x000000020000-0x000000170000 : "kernel" [ 0.821925] 0x000000170000-0x000000fe0000 : "rootfs" [ 0.827587] mtd: device 4 (rootfs) set to be root filesystem [ 0.831937] 1 squashfs-split partitions found on MTD device rootfs [ 0.837983] 0x0000005c0000-0x000000fe0000 : "rootfs_data" [ 0.845621] 0x000000fe0000-0x000000ff0000 : "backup" [ 0.851445] 0x000000ff0000-0x000001000000 : "art" While at it, convert to new build method Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: Move append-dtb to common image-commandsBen Whitten2016-06-225-29/+7
| | | | | | This build step is used by various targets, move it to a common section. Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
* lantiq: Slow down SPI flash on the DGN3500Daniel Gimpelevich2016-06-221-1/+1
| | | | | | | | | | | The bootloader uses 30 MHz as the SPI frequency for flash on the Germany and North America models, and 50 MHz for it on the worldwide model, but the Lantiq SPI driver in OpenWrt and LEDE may access the flash differently such that writes are capped at 20 MHz, leading to read errors reported on the worldwide model at 30 MHz. Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* lantiq: remove gr7000 supportJohn Crispin2016-06-223-161/+0
| | | | | | this seems to have never worked as the wrong SoC is selected Signed-off-by: John Crispin <john@phrozen.org>
* ipq806x: add initial support for Netgear R7800Pavel Kubelun2016-06-2210-12/+1597
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: move ath10k firmware selection into device profilesPavel Kubelun2016-06-222-1/+8
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* ipq806x: move smb208 nodes into a regulator subnodePavel Kubelun2016-06-221-0/+69
| | | | Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
* lantiq: make EASY80920 work with both chip versionsHauke Mehrtens2016-06-211-1/+2
| | | | | | | | | The EASY80920 is available with the A1X and the A2X chip version depending on the board version. Add both firmware versions to device tree and make the driver load the correct version depending on the chip version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: use new partition layout for EASY80920NANDHauke Mehrtens2016-06-211-6/+30
| | | | | | This matches the EASY80920NAND boards with UGW. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: build fullimage.img for EASY80920NANDHauke Mehrtens2016-06-211-0/+22
| | | | | | | | This image format is used by Lantiq's / Intel's UGW version 6.1 to 7.1. These images can be flashed onto a board with the SoC vendor boot loader as a replacement for the vendor firmware. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: remove patch adding support for building without reset controllerHauke Mehrtens2016-06-211-45/+0
| | | | | | | | The lantiq kernel arch code selects CONFIG_RESET_CONTROLLER always, so it is always selected when the lantiq target is build. we do not need support for unselected CONFIG_RESET_CONTROLLER option. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* brcm2708: properly detect the Raspberry Pi ZeroÁlvaro Fernández Rojas2016-06-213-2/+6
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: simplify block size and image offset optionsÁlvaro Fernández Rojas2016-06-211-34/+45
| | | | | | | | Instead of having CFE_EXTRAS for every device that need specific block sizes and image offset, let's define a couple of vars which can be customized for each device. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm63xx: add sysupgrade imagesÁlvaro Fernández Rojas2016-06-212-20/+31
| | | | | | | | | | Some devices require padded images in order to prevent CFE from flashing them to the wrong offset. For small flashes (4/8) this is no big deal, but for larger flashes (16/32) this implies 8 and 16 MB images, which is way too large and some devices aren't capable of flashing them through sysupgrade. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* lantiq: fix typo in new image generationBen Mulvihill2016-06-211-1/+1
| | | | | | | Fix typo in commit a6f7536a73c93794812d5e810fb41c3d0ff1fb27 (new image generation) Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
* sdk: Fix keeping unset as unsetDaniel Dickinson2016-06-211-15/+40
| | | | | | | | | | | | | | The configuration preservation mechanism fails to keep items was are unset as unset. For busybox this causes issues when building with custom settings in the SDK. Therefore preserve busybox unset settings. In addition we preserve non-package selection unset settings because they may be important for making sure we compile and identical package for packages that are recompiled in the SDK. Now that SDK not longer ships .config this becomes relevant for any use of the SDK. Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
* brcm63xx: merge DSL-274X-F1 profilesJonas Gorski2016-06-211-16/+6
| | | | | | | The only difference is a field in the image tag header, so just define two images for it instead of treating them as separate devices. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 08:20:48 +0000