| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
| |
DEVICE_TITLE is split up into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT
Signed-off-by: Moritz Warning <moritzwarning@web.de>
|
|
|
|
|
|
| |
Splits up DEVICE_TITLE into DEVICE_VENDOR, DEVICE_MODEL and DEVICE_VARIANT.
Signed-off-by: Moritz Warning <moritzwarning@web.de>
|
|
|
|
| |
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
|
|
|
| |
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
|
|
|
| |
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
|
|
|
|
|
|
|
|
| |
Bump the target to v4.19. Add a patch with additional eth driver
fixes/features that MTK provided aswell as the driver for the new mt7530
switch.
Signed-off-by: John Crispin <john@phrozen.org>
|
|
|
|
|
|
|
|
|
|
|
|
| |
The Aerohive HiveAP 121 has the wrong PLL value set for Gigabit speeds,
leading to packet-loss. 10M and 100M work fine.
This commit sets the Gigabit Ethernet PLL value to the correct value,
fixing packet loss.
Confirmed with iperf and floodping.
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
commit e09da0169a08 ("ar71xx: fix Mikrotik board detection")
was generated based on testing a rb-912 board, on which detection failed.
Testing on more hardware shows something fun:
machine : MikroTik RouterBOARD 922UAGS-5HPacD
machine : Mikrotik RouterBOARD 912UAG-5HPnD
Both lowercase and uppercase are used.
So ensure we support both now ..
Fixes: e09da0169a08 ("ar71xx: fix Mikrotik board detection")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
| |
Looks like a copy/paste error ..
Fixes: a89b49bca4ec ("kernel: bump 4.19 to 4.19.62")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
While flashing lots of RB2011 devices, I noticed that
some of them refused to boot properly, failing over the NAND parameters.
Checking in detail shows that some device seem to use another NAND flash
which only support standard 2048-byte pages, without 512-byte subpage support.
This commit disables usage of these small subpage completely.
Advantages:
- Both NAND's with(out) subpage support are working now
- The nand speed increases a bit (measured roughly 1%) in typical usecases
Disadvantages:
- The maximum storage capacity decreases by ~0.2%
as small changes can consume a full page (2048 bytes) now.
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Refreshed all patches.
Remove upstreamed:
- 023-0013-crypto-crypto4xx-fix-AES-CTR-blocksize-value.patch
- 023-0014-crypto-crypto4xx-fix-blocksize-for-cfb-and-ofb.patch
- 023-0015-crypto-crypto4xx-block-ciphers-should-only-accept-co.patch
- 950-0252-staging-bcm2835_camera-Ensure-all-buffers-are-return.patch
- 950-0253-staging-bcm2835-camera-Remove-check-of-the-number-of.patch
- 950-0254-staging-bcm2835-camera-Handle-empty-EOS-buffers-whil.patch
- 950-0489-staging-mmal-vchiq-Replace-spinlock-protecting-conte.patch
- 0021-ARM-dts-gemini-Fix-up-DNS-313-compatible-string.patch
- 049-v4.20-mips-remove-superfluous-check-for-linux.patch
- 100-MIPS-fix-build-on-non-linux-hosts.patch
- 303-MIPS-Fix-bounds-check-virt_addr_valid.patch
- 0002-usb-dwc2-use-a-longer-AHB-idle-timeout-in-dwc2_core_.patch
Altered patches:
- 950-0267-staging-vc04_services-Split-vchiq-mmal-into-a-module.patch
- 700-net-add-qualcomm-mdio-and-phy.patch
Fixes:
- CVE-2019-3846
New symbol:
- AX88796B_PHY
Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Refreshed all patches.
Remove upstreamed:
- 049-v4.20-mips-remove-superfluous-check-for-linux.patch
- 303-MIPS-Fix-bounds-check-virt_addr_valid.patch
Fixes:
- CVE-2019-3846
- CVE-2019-3900
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Refreshed all patches.
Fixes:
- CVE-2019-3846
Compile-tested on: none
Runtime-tested on: none
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
|
|
| |
- add uart rom script address in header of sdma firmware to support
the uart driver of latest kernel working well while old firmware
assume ram script used for uart driver as NXP internal legacy
kernel.
- add multi-fifo SAI/PDM scripts.
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
| |
YunCore A770 is based on QCA9531, not QCA9533.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit ports support for the ALFA Network AP121F, a pocket-size
router with 1 Ethernet and 2.4 GHz WiFi based on the AR9331 SoC, to the
ath79 target (it was already supported in ar71xx; see commit 0c6165d2
for more details).
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
[pepe2k@gmail.com: fixed GPIO polarity, included USB support, changed
DTS nodes order, moved WLAN LED trigger define to DTS, made U-Boot env
partition writable]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
|
|
|
|
|
|
|
|
|
| |
This commit selects wpad-basic for the FRITZ!Box 7312 and 7412 as
wpad-mini is only selected on boards with small flash.
Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
[add short description]
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
| |
Convert leading spaces to tab to match rest of the file.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
| |
This reverts commit 5c094ff660fd8e750ed1c1f38719a45065e77348.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
|
|
|
|
|
|
|
|
|
|
|
| |
Fix a typo in the machine type being extracted from /proc/cpuinfo
which causes all Mikrotik board to be undetected properly.
This lead to sysupgrade issues and probably some others too.
Fixes: acf2b6c8881b ("ar71xx: base-files: fix board detect on new MikroTik devices")
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
FON2601 is a wireless router.
Specification:
- SoC: Mediatek MT7620A (580MHz)
- RAM: 128 MiB
- ROM: 16 MiB SPI Flash
- Wireless:
for 11b/g/n (upto 300 Mbps): MT7620A built-in WMAC
for 11a/n/ac (upto 867 Mbps): MT7662E
- Ethernet LAN: 1 port, upto 100 Mbps
- Ethernet WAN: 1 port, upto 1000 Mbps
- USB: 1 port (USB 2.0 host)
- LEDs: 4 (all can be controlled by SoC's GPIO)
- buttons: 1 (Displayed as "WPS" on enclosure)
- serial port: 57600n8
pins: Vcc(3.3V), Rx, Tx, GND
(left to right, viewed from outside of board)
Installation (only available via UART):
1. download sysupgrade binary image by wget command
2. write sysupgrade binary image to Flash
command is:
mtd write sysupgrade.bin firmware
3. reboot
Important Notice:
Only one button is displayed as "WPS" on enclosure.
However, it is configured as "reset" (factory resetting feature).
Signed-off-by: NOGUCHI Hiroshi <drvlabo@gmail.com>
[removed unrelated openwrt-keyring revert, missing -Wall for uimage_padhdr]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
|
|
|
|
|
|
|
|
|
| |
The lines-initial-states property was an early attempt to set the latch
bit of the shift register on driver probe. It is not implemented in the
driver and was rejected upstream. The latch bit was always set by a GPIO
hog, so this property is safe to drop.
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
| |
There's an empty case in 02_network introduced by last commit. Drop it.
Fixes: ee650ba46c ("ramips: remove needless setting of lan_mac to eth0 in 02_network")
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
| |
This removes superfluous lines like
lan_mac=$(cat /sys/class/net/eth0/address)
Since lan_mac only sets the MAC address for eth0.1, these lines
can be safely removed as the address will be inherited from eth0
anyway.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
| |
The vast majority of devices labels "factory" partition with lower
case. Convert the small fraction with capital letter to that and
merge another case in 02_network.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
| |
This just merges some duplicate definitions and consolidates lines.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Chuanhong Guo <gch981213@gmail.com> [merge duplicated
cases for phicomm k2p]
|
|
|
|
|
|
|
| |
This cosmetical patch is just meant to make comparing/checking
IMAGE_SIZE values easier.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
|
| |
There are frequent examples of the ralink_default_fw_size_xxx
variables being used to "roughly" set flash size without caring
about the actual size of the firmware partition.
To discourage this behavior, this patch removes the variables and
just sets IMAGE_SIZE by its numeric value for each target.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, ramips target defines 0x7b0000 as default IMAGE_SIZE
for all devices in ramips target, i.e. this will be set if a
device does not specify IMAGE_SIZE itself.
From 92 devices using that default due to a "missing" IMAGE_SIZE,
14 were incorrect by a small amount (i.e. still "8M" flash) and
12 were completely off ("16M", "4M", ...).
This patch thus removes the _default_ IMAGE_SIZE and defines
IMAGE_SIZE for each device individually. This should indicate to
people supporting new devices that this parameter has to be cared
about.
For the present code, this patch is cosmetical.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes IMAGE_SIZE for all devices based on the partition size
given in DTS:
DEVICE *.MK *.DTS VERDICT
7links_px-4885-4m (4M) 0x3b0000
7links_px-4885-8m - 0x7b0000 default
8devices_carambola - 0x7b0000 default
accton_wr6202 - 0x7b0000 default
airlive_air3gii (4M) 0x3b0000
alfa-network_w502u - 0x7b0000 default
allnet_all0256n-4m (4M) 0x3b0000
allnet_all0256n-8m - 0x7b0000 default
allnet_all5002 32448k 0x1fb0000
allnet_all5003 32448k 0x1fb0000
alphanetworks_asl26555-16m 15872k 0xf80000
alphanetworks_asl26555-8m 7744k 0x790000
arcwireless_freestation5 - 0x7b0000 default
argus_atp-52b 7808k 0x7a0000
asiarf_awapn2403 (4M) 0x3b0000
asiarf_awm002-evb-4m (4M) 0x3b0000
asiarf_awm002-evb-8m - 0x7b0000 default
asus_rt-g32-b1 (4M) 0x3b0000
asus_rt-n10-plus (4M) 0x3b0000
asus_rt-n13u - 0x7b0000 default
asus_wl-330n (4M) 0x3b0000
asus_wl-330n3g (4M) 0x3b0000
aximcom_mr-102n - 0x790000 wrong
aztech_hw550-3g - 0x7b0000 default
belkin_f5d8235-v2 7744k 0x790000
belkin_f7c027 7616k 0x770000
buffalo_whr-g300n 3801088 0x3a0000
dlink_dap-1350 7488k 0x750000
dlink_dcs-930 (4M) 0x3b0000
dlink_dcs-930l-b1 (4M) 0x3b0000
dlink_dir-300-b1 (4M) 0x3b0000
dlink_dir-300-b7 (4M) 0x7b0000 wrong
dlink_dir-320-b1 - 0x7b0000 default
dlink_dir-600-b1 (4M) 0x3b0000
dlink_dir-610-a1 (4M) 0x3b0000
dlink_dir-615-d (4M) 0x3b0000
dlink_dir-615-h1 (4M) 0x3b0000
dlink_dir-620-a1 - 0x7b0000 default
dlink_dir-620-d1 - 0x7b0000 default
dlink_dwr-512-b 7800k 0x7e0000 wrong
easyacc_wizard-8800 - 0x7b0000 default
edimax_3g-6200n 3648k 0x390000
edimax_3g-6200nl 3648k 0x390000
engenius_esr-9753 (4M) 0x3b0000
fon_fonera-20n - 0x7b0000 default
hame_mpr-a1 (4M) 0x3b0000
hame_mpr-a2 - 0x7b0000 default
hauppauge_broadway 7744k 0x790000
hilink_hlk-rm04 - 0x3b0000 wrong
hootoo_ht-tm02 - 0x7b0000 default
huawei_d105 (4M) 0x3b0000
huawei_hg255d 15744k 0xf60000
intenso_memory2move - 0x7b0000 default
jcg_jhr-n805r (4M) 0x3b0000
jcg_jhr-n825r (4M) 0x3b0000
jcg_jhr-n926r (4M) 0x3b0000
mofinetwork_mofi3500-3gn - 0x7b0000 default
netcore_nw718 3712k 0x3a0000
netgear_wnce2001 (4M) 0x350000 wrong
nexaira_bc2 - 0x7b0000 default
nexx_wt1520-4m (4M) 0x3b0000
nexx_wt1520-8m - 0x7b0000 default
nixcore_x1-16m 16064k 0xfb0000
nixcore_x1-8m 7872k 0x7b0000
olimex_rt5350f-olinuxino - 0x7b0000 default
olimex_rt5350f-olinuxino-evb - 0x7b0000 default
omnima_miniembplug - 0x7b0000 default
omnima_miniembwifi - 0x7b0000 default
petatel_psr-680w (4M) 0x3b0000
planex_mzk-dp150n (4M) 0x3b0000
planex_mzk-w300nh2 3648k 0x390000
planex_mzk-wdpr - 0x680000 wrong
poray_ip2202 - 0x7b0000 default
poray_m3 (4M) 0x3b0000
poray_m4-4m (4M) 0x3b0000
poray_m4-8m - 0x7b0000 default
poray_x5 - 0x7b0000 default
poray_x8 - 0x7b0000 default
prolink_pwh2004 - 0x7b0000 default
ralink_v22rw-2x2 (4M) 0x3b0000
sitecom_wl-351 (4M) 0x3b0000
skyline_sl-r7205 (4M) 0x3b0000
sparklan_wcr-150gn (4M) 0x3b0000
teltonika_rut5xx - 0xfb0000 wrong
tenda_3g150b (4M) 0x3b0000
tenda_3g300m (4M) 0x3b0000
tenda_w150m (4M) 0x3b0000
tenda_w306r-v2 (4M) 0x3b0000
trendnet_tew-638apb-v2 (4M) 0x3b0000
trendnet_tew-714tru - 0x7b0000 default
unbranded_a5-v11 (4M) 0x3b0000
unbranded_wr512-3gn-4m (4M) 0x3b0000
unbranded_wr512-3gn-8m - 0x7b0000 default
unbranded_xdx-rn502j (4M) 0x3b0000
upvel_ur-326n4g (4M) 0x3b0000
upvel_ur-336un - 0x7b0000 default
vocore_vocore-16m 16064k 0xfb0000
vocore_vocore-8m 7872k 0x7b0000
wansview_ncs601w - 0x7b0000 default
wiznet_wizfi630a (16M) 0xfb0000
zorlik_zl5900v2 - 0x7b0000 default
zyxel_keenetic (4M) 0x3b0000
zyxel_keenetic-start (4M) 0x3b0000
zyxel_nbg-419n (4M) 0x3b0000
zyxel_nbg-419n-v2 (8M) 0x7b0000
No verdict means that the device is correctly set.
Legend:
( ): Value is set via ralink_default_fw_size_xxM
[ ]: Value is derived from parent definition
- : Value is not set and derived from default definition
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes IMAGE_SIZE for all devices based on the partition size
given in DTS:
DEVICE *.MK *.DTS VERDICT
airlink101_ar670w (4M) 0x3c0000 wrong
airlink101_ar725w - 0x3B0000 wrong
asus_rt-n15 (4M) 0x3b0000
belkin_f5d8235-v1 7744k 0x7b0000 wrong
buffalo_wli-tx4-ag300n (4M) 0x3b0000
buffalo_wzr-agl300nh (4M) 0x3b0000
dlink_dap-1522-a1 3801088 0x3a0000
ralink_v11st-fe (4M) 0x003b0000
asus_rt-n56u - 0x007b0000 default
belkin_f9k1109v1 7224k 0x7a0000 wrong
dlink_dir-645 - 0x7b0000 default
edimax_br-6475nd 7744k 0x00790000
loewe_wmdr-143n - 0x7b0000 default
omnima_hpm 16064k 0x00fb0000
samsung_cy-swr1100 - 0x7b0000 default
sitecom_wlr-6000 7244k 0x713000
trendnet_tew-691gr - 0x007b0000 default
trendnet_tew-692gr - 0x007b0000 default
No verdict means that the device is correctly set.
Legend:
( ): Value is set via ralink_default_fw_size_xxM
[ ]: Value is derived from parent definition
- : Value is not set and derived from default definition
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes IMAGE_SIZE for all devices based on the partition size
given in DTS:
DEVICE *.MK *.DTS VERDICT
alfa-network_awusfree1 (8M) 0x7b0000
buffalo_wcr-1166ds - 0x7c0000 wrong
cudy_wr1000 (8M) 0x7b0000
d-team_pbr-d1 (16M) 0x0fb0000
duzun_dm06 - 0x7b0000 default
glinet_gl-mt300n-v2 16064k 0xfb0000
glinet_vixmini 7872k 0x7b0000
hilink_hlk-7628n (32M) 0x1fb0000
hiwifi_hc5661a (16M) 0xf70000 wrong
hiwifi_hc5861b 15808k 0xf70000
mediatek_linkit-smart-7688 (32M) 0x1fb0000
mediatek_mt7628an-eval-board (4M) 0x7b0000 wrong
mercury_mac1200r-v2 - 0x7c0000 wrong
netgear_r6120 15744k 0xf60000
onion_omega2 (16M) 0xfb0000
onion_omega2p (32M) 0x1fb0000
rakwireless_rak633 - 0x7b0000 default
skylab_skw92a 16064k 0xfb0000
tama_w06 15040k 0xeb0000
totolink_lr1200 7872k 0x7b0000
tplink_archer-c20-v4 7808k 0x7a0000
tplink_archer-c50-v3 7808k 0x7a0000
tplink_archer-c50-v4 7616k 0x770000
tplink_tl-mr3020-v3 7808k 0x7a0000
tplink_tl-mr3420-v5 7808k 0x7a0000
tplink_tl-wa801nd-v5 7808k 0x7a0000
tplink_tl-wr802n-v4 7808k 0x7a0000
tplink_tl-wr840n-v4 7808k 0x7a0000
tplink_tl-wr840n-v5 3904k 0x3d0000
tplink_tl-wr841n-v13 7808k 0x7a0000
tplink_tl-wr841n-v14 3968k 0x3e0000
tplink_tl-wr842n-v5 7808k 0x7a0000
tplink_tl-wr902ac-v3 7808k 0x7a0000
unielec_u7628-01-128m-16m 16064k 0xfb0000
vocore_vocore2 (16M) 0xfb0000
vocore_vocore2-lite (16M) 0x7b0000 wrong
wavlink_wl-wn570ha1 (8M) 0x7b0000
wavlink_wl-wn575a3 (8M) 0x7b0000
widora_neo-16m (16M) 0x0fb0000
widora_neo-32m (32M) 0x1fb0000
wiznet_wizfi630s (32M) 0x1fb0000
wrtnode_wrtnode2p (16M) 0x1fb0000 wrong
wrtnode_wrtnode2r (16M) 0x1fb0000 wrong
xiaomi_mir4a-100m 14976k 0xea0000
xiaomi_miwifi-nano (16M) 0xfb0000
zbtlink_zbt-we1226 (8M) 0x7b0000
zyxel_keenetic-extra-ii 14912k 0xe90000
No verdict means that the device is correctly set.
Legend:
( ): Value is set via ralink_default_fw_size_xxM
[ ]: Value is derived from parent definition
- : Value is not set and derived from default definition
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes IMAGE_SIZE for all devices based on the partition size
given in DTS:
DEVICE *.MK *.DTS VERDICT
afoundry_ew1200 (16M) 0xfb0000
asiarf_ap7621-001 (16M) 0xfa0000 wrong
buffalo_wsr-1166dhp (16M) 0xf90000 wrong
buffalo_wsr-600dhp (16M) 0xfb0000
dlink_dir-860l-b1 (16M) 0xfb0000
d-team_newifi-d2 (32M) 0x1fb0000
d-team_pbr-m1 (16M) 0xfb0000
elecom_wrc-1167ghbk2-s 15488k 0xf20000
elecom_wrc-1900gst 11264k 0xb00000
elecom_wrc-2533gst 11264k 0xb00000
firefly_firewrt (16M) 0xfb0000
gehua_ghl-r-001 (32M) 0x1fb0000
gnubee_gb-pc1 (32M) 0x1fb0000
gnubee_gb-pc2 (32M) 0x1fb0000
hiwifi_hc5962 (32M) 0x2000000 wrong (kernel + ubi)
iodata_wn-ax1167gr 15552k 0xf30000
iodata_wn-gx300gr 7798784 0x770000
lenovo_newifi-d1 (32M) 0x1fb0000
linksys_re6500 - 0x7b0000 default
mediatek_ap-mt7621a-v60 (8M) 0x7b0000
mediatek_mt7621-eval-board (4M) 0xec0000 wrong (rootfs)
mikrotik_rb750gr3 [16128k] 0xfc0000
mikrotik_rbm11g [16128k] 0xFC0000
mikrotik_rbm33g [16128k] 0xFC0000
mqmaker_witi-256m (16M) 0xfb0000
mqmaker_witi-512m (16M) 0xfb0000
mtc_wr1201 16000k 0xfa0000
netgear_ex6150 14848k 0xe80000
netgear_r6220 28672k 0x1c00000
netgear_r6350 40960k 0x2800000
netgear_wndr3700-v5 15232k 0xee0000
netis_wf-2881 129280k 0x7E40000
phicomm_k2p 15744k 0xf60000
planex_vr500 66453504 0x3fb0000 wrong
samknows_whitebox-v8 (16M) 0xfb0000
storylink_sap-g3200u3 - 0x7b0000 default
telco-electronics_x1 16064k 0xfb0000
thunder_timecloud - 0xfb0000 wrong
totolink_a7000r 16064k 0xfb0000
tplink_re350-v1 6016k 0x5e0000
ubiquiti_edgerouterx - 0xfa00000 wrong (kernel1 + ubi)
ubiquiti_edgerouterx-sfp - 0xfa00000 wrong (kernel1 + ubi)
unielec_u7621-06-256m-16m 16064k 0xfb0000
unielec_u7621-06-512m-64m 65216k 0x3fb0000
wevo_11acnas (16M) 0xfb0000
wevo_w2914ns-v2 (16M) 0xfb0000
xiaomi_mir3g 32768k 0x7980000 wrong (kernel + ubi)
xiaomi_mir3p (32M) 0xf980000 wrong (kernel + ubi)
xzwifi_creativebox-v1 (32M) 0x1fb0000
youhua_wr1200js 16064k 0xfb0000
youku_yk-l2 (16M) 0xfb0000
zbtlink_zbt-we1326 (16M) 0xfb0000
zbtlink_zbt-we3526 (16M) 0xfb0000
zbtlink_zbt-wg2626 (16M) 0xfb0000
zbtlink_zbt-wg3526-16m (16M) 0xfb0000
zbtlink_zbt-wg3526-32m (32M) 0x1fb0000
No verdict means that the device is correctly set.
Legend:
( ): Value is set via ralink_default_fw_size_xxM
[ ]: Value is derived from parent definition
- : Value is not set and derived from default definition
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes IMAGE_SIZE for all devices based on the partition size
given in DTS:
DEVICE *.MK *.DTS VERDICT
aigale_ai-br100 7936k 0x7c0000
alfa-network_ac1200rm 16064k 0xfb0000
alfa-network_tube-e4g 16064k 0xfb0000
asus_rp-n53 - 0x7b0000 default
asus_rt-ac51u (16M) 0xfb0000
asus_rt-n12p - 0xfb0000 wrong
asus_rt-n14u - 0xfb0000 wrong
bdcom_wap2100-sk 15808k 0xf70000
buffalo_whr-1166d 15040k 0xfb0000 wrong
buffalo_whr-300hp2 6848k 0x7b0000 wrong
buffalo_whr-600d 6848k 0x7b0000 wrong
buffalo_wmr-300 - 0x7b0000 default
comfast_cf-wr800n - 0x7b0000 default
dlink_dch-m225 6848k 0x6b0000
dlink_dir-510l - 0xde0000 wrong
dlink_dir-810l 6720k 0x690000
dlink_dwr-116-a1 - 0x7e0000 wrong
dlink_dwr-118-a1 - 0xfe0000 wrong
dlink_dwr-118-a2 - 0xfe0000 wrong
dlink_dwr-921-c1 (16M) 0xfe0000 wrong
dlink_dwr-921-c3 [(16M)] 0xfe0000 wrong
dlink_dwr-922-e2 (16M) 0xfe0000 wrong
dovado_tiny-ac - 0x7b0000 default
edimax_br-6478ac-v2 7616k 0x00790000 wrong
edimax_ew-7476rpc 7744k 0x00790000
edimax_ew-7478ac 7744k 0x00790000
edimax_ew-7478apc 7744k 0x00790000
elecom_wrh-300cr (16M) 0xdf0000 wrong
glinet_gl-mt300a (16M) 0xf80000 wrong
glinet_gl-mt300n (16M) 0xf80000 wrong
glinet_gl-mt750 (16M) 0xf80000 wrong
head-weblink_hdrm200 16064k 0xfb0000
hiwifi_hc5661 15872k 0xf80000
hiwifi_hc5761 15872k 0xf80000
hiwifi_hc5861 15872k 0xf80000
hnet_c108 16777216 0xfb0000 wrong
iodata_wn-ac1167gr 6864k 0x6b4000
iodata_wn-ac733gr3 6992k 0x6d4000
kimax_u25awf-h1 16064k 0xfb0000
kimax_u35wf 16064k 0xfb0000
kingston_mlw221 15744k 0xf60000
kingston_mlwg2 15744k 0xf60000
lava_lr-25g001 - 0xfe0000 wrong
lenovo_newifi-y1 (16M) 0xfb0000
lenovo_newifi-y1s (16M) 0xfb0000
linksys_e1700 - 0x7b0000 default
microduino_microwrt 16128k 0xfc0000
netgear_ex2700 (4M) 0x3b0000
netgear_ex3700 7744k 0x790000
netgear_wn3000rp-v3 - 0x7b0000 default
nexx_wt3020-4m (4M) 0x3b0000
nexx_wt3020-8m - 0x7b0000 default
ohyeah_oy-0001 (16M) 0xfb0000
phicomm_k2g 7552k 0x760000
phicomm_psg1208 - 0x7b0000 default
phicomm_psg1218a - 0x7b0000 default
phicomm_psg1218b - 0x7b0000 default
planex_cs-qr10 - 0x7b0000 default
planex_db-wrt01 - 0x7b0000 default
planex_mzk-750dhp - 0x7b0000 default
planex_mzk-ex300np - 0x730000 wrong
planex_mzk-ex750np - 0x730000 wrong
ralink_mt7620a-evb - 0x7b0000 default
ralink_mt7620a-mt7530-evb - 0x7b0000 default
ralink_mt7620a-mt7610e-evb - 0x7b0000 default
ralink_mt7620a-v22sg-evb - 0x7f80000 wrong
ravpower_wd03 (8M) 0x7b0000
sanlinking_d240 (16M) 0xfb0000
sercomm_na930 20m 0x1400000
tplink_archer-c20i - 0x7a0000 wrong
tplink_archer-c20-v1 - 0x7a0000 wrong
tplink_archer-c2-v1 - 0x7a0000 wrong
tplink_archer-c50-v1 - 0x7a0000 wrong
tplink_archer-mr200 - 0x7b0000 default
vonets_var11n-300 (4M) 0x3b0000
wrtnode_wrtnode (16M) 0xfb0000
xiaomi_miwifi-mini (16M) 0xf80000 wrong
youku_yk1 (32M) 0x1fb0000
yukai_bocco - 0x7b0000 default
zbtlink_we1026-5g-16m 16777216 0xfb0000 wrong
zbtlink_zbt-ape522ii - 0xf80000 wrong
zbtlink_zbt-cpe102 - 0x760000 wrong
zbtlink_zbt-wa05 - 0x760000 wrong
zbtlink_zbt-we2026 - 0x760000 wrong
zbtlink_zbt-we826-16m (16M) 0xfb0000
zbtlink_zbt-we826-32m (32M) 0x1fb0000
zbtlink_zbt-we826-e 32448k 0x1fb0000
zbtlink_zbt-wr8305rt - 0x7b0000 default
zte_q7 - 0x7b0000 default
zyxel_keenetic-omni - 0x7b0000 default
zyxel_keenetic-omni-ii - 0x7b0000 default
zyxel_keenetic-viva 16064k 0xfb0000
No verdict means that the device is correctly set.
Legend:
( ): Value is set via ralink_default_fw_size_xxM
[ ]: Value is derived from parent definition
- : Value is not set and derived from default definition
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
| |
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
In ramips, there are the following predefined values for IMAGE_SIZE
ralink_default_fw_size_4M 3866624 3776k 0x3B0000
ralink_default_fw_size_8M 8060928 7872k 0x7B0000
ralink_default_fw_size_16M 16121856 15744k 0xF60000
ralink_default_fw_size_32M 33226752 32448k 0x1FB0000
Out of those, the "16M" value is obviously odd, as it provides more
room for the remaining partitions than the tree others.
Of the devices in all subtargets, there are actually > 50 that have
a firmware partition with 0xFB0000 size, while only 5 (!) have
0xF60000. From the former, many are set to
ralink_default_fw_size_16M anyway, although it is wrong at the
present point.
Consequently, it makes sense to change ralink_default_fw_size_16M
to 0xFB0000, and to update IMAGE_SIZE for the 5 devices with
0xF60000.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
allnet_all0256n-4m, tenda_w150m and unbranded_wr512-3gn-4m have
their firmware partition set to reg = <0x50000 0x3c8000>.
However, based on the 4MB flash, the size should be 0x3b0000.
After some research in the target's history, it looks like the
changed size has been a mistake when transferring device
partitions from Makefile to DTS in 770b28f146f.
This patch changes the named three devices back to 0x3b0000.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
|
|
|
|
|
|
|
|
|
|
|
| |
Like most mt7621 boards, Phicomm K2P stores LAN/WAN mac addresses
at 0xe000/0xe006 of factory partition.
Phicomm uses lan_mac-1 as wan_mac, while our default case in 02_network
uses lan_mac+1.
Add a special case reading lan/wan mac address for Phicomm K2P.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
|
|
|
|
|
|
|
|
|
|
|
|
| |
Now that the mt76 driver supports the MT7615D chip found on these
devices, use it.
Also add the wpad-basic package.
Note: the driver supports operation on both the 2.4 GHz and the
5 GHz bands, but not yet concurrently.
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
savedscp is a method of storing the DSCP of an ip packet into conntrack
mark. In combination with a suitable tc filter action (conndscp but may
end up being integrated into connmark) DSCP values are able to be stored
on egress and restored on ingress across links that otherwise alter or
bleach DSCP.
This is useful for qdiscs such as CAKE which are able to shape according
to policies based on DSCP.
Ingress classification is traditionally a challenging task since
iptables rules haven't yet run and tc filter/eBPF programs are pre-NAT
lookups, hence are unable to see internal IPv4 addresses as used on the
typical home masquerading gateway.
The ingress problem is solved by the tc filter, but the tc people didn't
like the idea of tc setting conntrack mark values, though they are ok
with reading conntrack values and hence restoring DSCP from conntrack
marks.
x_tables CONNMARK with the new savedscp action solves the problem of
storing the DSCP to the conntrack mark.
It accepts 2 parameters. The mark is a 32bit value with usually one 1
bit set. This bit is set when savedscp saves the DSCP to the mark.
This is useful to implement a 'one shot'
iptables based classification where the 'complicated' iptables rules are
only run once to classify the connection on initial (egress) packet and
subsequent packets are all marked/restored with the same DSCP. A mark
of zero disables the setting of a status bit/s.
The mask is a 32bit value of at least 6 contiguous bits and represents
the area where the DSCP will be stored.
e.g.
iptables -A QOS_MARK_eth0 -t mangle -j CONNMARK --savedscp-mark 0xfc000000/0x01000000
Would store the DSCP in the top 6 bits of the 32bit mark field, and use
the LSB of the top byte as the 'DSCP has been stored' marker.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
|
|
|
|
|
|
| |
Update WLAN LED colour identifier for both interfaces on Archer C7
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
|
|
|
|
|
|
|
| |
Move system LED board definitions of Archer C5/C7 to reflect
actual system LED colour used
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
|
|
|
|
|
|
|
|
|
|
| |
All leds on these boards are green. v1 has RFKILL GPIO 23 for production
units (it had GPIO 13 only for test phase units, and these are rather
very rare to find). As for the previous attempt to fix this and revert
due to WDR boards have blue leds, it was wrong: WDR board does not use
common setup (false).
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
|
|
|
|
|
|
|
| |
Base address for USB0 has changed from 0x18116c94 on AR934X
to 0x18116d94 on QCA9558. CP Typo remained for years here...
Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com>
|
|
|
|
|
|
|
|
|
| |
Change capitalization from spaces to tabs in order to match
the style of the file.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
[fix capitalization in commit title, add short description]
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Hardware spec of DIR-842 C2:
SoC: QCA9563
DRAM: 128MB DDR2
Flash: 16MB SPI-NOR
Switch: QCA8337N
WiFi 5.8GHz: QCA9888
WiFi 2.4Ghz: QCA9563
USB: 2.0
Flash instructions:
1. Upgrade the factory.bin through the factory web interface or
the u-boot failsafe interface.
The firmware will boot up correctly for the first time.
Do not power off the device after OpenWrt has booted.
Otherwise the u-boot will enter failsafe mode as the checksum
of the firmware has been changed.
2. Upgrade the sysupgrade.bin in OpenWrt.
After upgrading completes the u-boot won't complain about the
firmware checksum and it's OK to use now.
3. If you powered off the device before upgrading the sysupgrade.bin,
just upgrade the factory.bin through the u-boot failsafe interface
and then goto step 2.
Signed-off-by: Jackson Lim <jackcolentern@gmail.com>
[Reword reset-hog comment, fix formatting]
Signed-off-by: David Bauer <mail@david-bauer.net>
|
|
|
|
|
|
|
| |
Newifi D1 is shipped with an 8GB microSD card in its SD slot
Without SD driver users would not be able to use it unless manually installed
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
|
|
|
|
|
|
|
|
|
|
|
| |
1) nand_do_upgrade() is always called by a target code
2) nand_do_upgrade() starts with calling platform_nand_pre_upgrade()
It means there is no need for the platform_nand_pre_upgrade() callback
at all. All code that was present there could bo moved & simplly called
by a target right before the nand_do_upgrade().
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
|
|
|
|
|
|
|
|
| |
1) RAMFS_COPY_BIN and RAMFS_COPY_DATA can be defined at top of the file
like it's done for all other targets.
2) fw_printenv.lock can be created one step later in the
platform_do_upgrade(). It seems to be working well on many other
targets.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This updates mac80211 to version 5.2-rc7, this contains all the changes
to the wireless subsystem up to Linux 5.2-rc7.
* The removed patches are applied upstream
* b43 now uses kmod-lib-cordic
* Update the nl80211.h file in iw to match backports version.
* Remove the two backports from kernel 4.9, they were needed for mt76,
but that can use the version from backports now, otherwise they
collide and cause compile errors.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|