aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* filogic: add support for Netgear WAX220Flole Systems2023-06-265-0/+321
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware -------- SOC: MediaTek MT7986 RAM: 1024MB DDR3 FLASH: 128MB SPI-NAND (Winbond) WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz ETH: Realtek RTL8221B-VB-CG 2.5 N-Base-T PHY with PoE UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC) Installation ------------ 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server 2. Connect the TFTP server to the WAX220. Conect to the serial console, interrupt the autoboot process by pressing '0' when prompted. 3. Download & Boot the OpenWrt initramfs image. $ setenv ipaddr 192.168.2.1 $ setenv serverip 192.168.2.2 $ tftpboot openwrt.bin $ bootm 4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n <path-to-sysupgrade.bin> Signed-off-by: Flole Systems <flole@flole.de> Signed-off-by: Stefan Agner <stefan@agner.ch> (cherry picked from commit 984786a2f7ec622c99e8c9cdada65d0ea0cf4e0b)
* kernel: bump 5.15 to 5.15.118John Audia2023-06-2538-48/+48
| | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 1f5fce27c195373fedcf233a48470de97752058f)
* ipq40xx: meraki-mr33, meraki-mr74: disable image generationLech Perczak2023-06-251-0/+2
| | | | | | | | | | | | | | After migrating to kernel 5.15, upgrading causes the units to become soft-bricked, hanging forever at the kernel startup. Kernel size limitation of 4000000 bytes is suspected here, but this is not fully confirmed. Disable the images to protect users from inadvertent bricking of units, because recovery of those is painful with Cisco's U-boot, until the root cause is found and fixed. Signed-off-by: Lech Perczak <lech.perczak@gmail.com> (cherry picked from commit 9d64cc068fbb15d9e6498c1eba79851823b2f4f5)
* ramips: fix lan leds for Wavlink WL-WN535K1Davide Fioravanti2023-06-253-5/+5
| | | | | | | | | | Previously both lan1 and lan2 leds were wrongly labelled as lan2. Moreover they were connected to the wrong lan port. Fixes 8fde82095ba0 ("ramips: add support for Wavlink WL-WN535K1") Reported-by: Nicolò Maria Semprini <nicosemp@gmail.com> Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> (cherry picked from commit c71dada92654a53c63bbc5bebcc40fe924750ed7)
* ramips: mt7621: add support for Zbtlink ZBT-WG1608 (32M)Kim DoHyoung2023-06-253-1/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Zbtlink ZBT-WG1608 is a Wi-Fi router intendent to use with WWAN (4G/5G) modems. Specifications: * SoC: MediaTek MT7621A * RAM: 256/512 MiB * Flash: 16/32 MiB (SPI NOR) * Wi-Fi: * MediaTek MT7603E : 2.4Ghz * MediaTek MT7613BE : 5Ghz * Ethernet: 10/100/1000 Mbps Ethernet x5 ports (4xLAN + WAN) * M.2: 1x slot with USB&SIM * EM7455/EM12-G/EM160R/RM500Q-AE * USB: 1x 3.0 Type-A port * External storage: 1x microSD (SDXC) slot * UART: console (115200 baud) * LED: * 1 power indicator * 1 WLAN 2.4G controlled (wlan 2G) * 3 SoC controlled (wlan 5G, wwan, internet) * 5 per Eth phy (4xLAN + WAN) MAC Addresses: * LAN : f8:5e:3c:xx:xx:e0 (Factory, 0xe000 (hex)) * WAN : f8:5e:3c:xx:xx:e1 (Factory, 0xe006 (hex)) * 2.4 GHz: f8:5e:3c:xx:xx:de (Factory, 0x0004 (hex)) * 5 GHz : f8:5e:3c:xx:xx:df (Factory, 0x8004 (hex)) Installation: * Vendor's firmware is OpenWrt (LEDE) based, so the sysupgrade image can be directly used to install OpenWrt. Firmware must be upgraded using the 'force' and 'do not save configuration' command line options (or correspondig web interface checkboxes) since the vendor firmware is from the pre-DSA era. Recovery Mode: * Press reset button, power up the device, wait for about 10sec. * Upload sysupgrade image through the firmware recovery mode web page at 192.168.1.1. Signed-off-by: Kim DoHyoung <azusahmr@k-on.kr> (cherry picked from commit 0bbd5699c81d6887c4d895e85b56d8c23b1211ec)
* ath79: add support for Aruba AP-115David Bauer2023-06-233-0/+260
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware ======== CPU Qualcomm Atheros QCA9558 RAM 256MB DDR2 FLASH 2x 16M SPI-NOR (Macronix MX25L12805D) WIFI Qualcomm Atheros QCA9558 Atheros AR9590 Installation ============ 1. Attach to the serial console of the AP-105. Interrupt autoboot and change the U-Boot env. $ setenv rb_openwrt "setenv ipaddr 192.168.1.1; setenv serverip 192.168.1.66; netget 0x80060000 ap115.bin; go 0x80060000" $ setenv fb_openwrt "bank 1; cp.b 0xbf100040 0x80060000 0x10000; go 0x80060000" $ setenv bootcmd "run fb_openwrt" $ saveenv 2. Load the OpenWrt initramfs image on the device using TFTP. Place the initramfs image as "ap105.bin" in the TFTP server root directory, connect it to the AP and make the server reachable at 192.168.1.66/24. $ run rb_openwrt 3. Once OpenWrt booted, transfer the sysupgrade image to the device using scp and use sysupgrade to install the firmware. Signed-off-by: David Bauer <mail@david-bauer.net> (cherry picked from commit 1b467a902ec9b8bf29805c6928627e8bbad0f14c)
* bmips: add support for Arcadyan AR7516Daniel González Cabanelas2023-06-225-0/+208
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Arcadyan AR7516, AKA Orange Bright Box or EE Bright Box 1, is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. It comes with a horizontal stand black shiny casing. Newer Bright Box 1 model stands vertically, and comes with a totally different board inside, not compatible with this firmware. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 8 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43227 802.11bgn (onboard) - USB: 1x 2.0 - ADSL: yes, unsupported - Buttons: 2x - LEDs: 9x, power LED is hardware controlled - UART: yes Installation in two steps, new CFE bootloader and firmware: Install new CFE: 1. Power off the router and press the RESET button 2. Power on the router and wait some seconds 3. Release the RESET button 3. Browse to http://192.168.1.1, this web interface will offer both firmware (“Software”) upgrade and bootloader upgrade; be sure to use the bootloader section of the upload form. 4. Upload the new CFE (availabe at the wiki page) 5. Wait about a minute for flashing to finish and reboot into the new bootloader. Install OpenWrt via new CFE web UI: 1. After installing the new CFE, visit http://192.168.1.1 2. Upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry-picked from df8e4b6c2e6440bc9a31467de1739c69c328e391)
* kernel: remove bridge offload hackEtienne Champetier2023-06-201-846/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch initially introduced in 94b4da9b4aaded6ed8a5bd93bf38a7c92753fe68 breaks mvebu devices when using vlan filtering with kernel 5.15 or 6.1, it was working ok in 5.10. With this patch, frame that should exit untagged from the switch exit tagged. Running 'tcpdump -Q out -evnnli eth1' (eth1 being the dsa interface) - with the hack, frame is sent directly to the destination port 4 with VID 2, so the switch leave the tag as instructed: 11:22:33:44:55:66 > 77:88:99:aa:bb:cc, Marvell EDSA ethertype 0xdada (Unknown), rsvd 0 0, mode From CPU, target dev 0, port 4, tagged, VID 2, FPri 0, ethertype ARP (0x0806), length 50: Ethernet (len 6), IPv4 (len 4), Request who-has 5.6.7.8 tell 1.2.3.4, length 28 - without the hack, frame is sent to the switch that performs the forwarding decision and untagging: 11:22:33:44:55:66 > 77:88:99:aa:bb:cc, Marvell EDSA ethertype 0xdada (Unknown), rsvd 0 0, mode Forward, dev 1, port 0, tagged, VID 2, FPri 0, ethertype ARP (0x0806), length 50: Ethernet (len 6), IPv4 (len 4), Request who-has 5.6.7.8 tell 1.2.3.4, length 28 Removing this patch makes my Turris Omnia usable with vlan filtering, ie wifi device can talk to wired device again. Using kernel 5.15 some broadcast/multicast traffic is still leaked (on a VLAN 2 access port I see tagged VLAN 3 frame), using kernel 6.1 fixes that. People needing the extra performance should try the bridger package. Acked-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com> (cherry picked from commit 244328b19c3943bb145b72f0d85062f535e56fbd)
* bmips: add support for NuCom R5010UNv2Daniel González Cabanelas2023-06-195-2/+234
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The NuCom R5010UNv2 is a wifi fast ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 V7.5 @ 320Mhz - RAM: 64 MB DDR2 - Flash: 16 MB SPI NOR - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: Broadcom BCM43217 802.11bgn (onboard) - USB: 1x 2.0 - Buttons: 2x - ADSL: yes, unsupported - LEDs: 7x - UART: yes Installation via CFE web UI: 1. Power off the router and press the RESET button 2. Power on the router and wait 12 or more seconds 3. Release the RESET button 4. Browse to http://192.168.1.1 and upload the Openwrt cfe firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit 6cb3328b4fd4939f3800d4be9d52744b753de1b6)
* bmips: enable the data Read Ahead Cache for BMIPS4350Daniel González Cabanelas2023-06-191-0/+42
| | | | | | | | | | | | | | The data RAC is left disabled by the bootloader in some SoCs, at least in the core it boots from. Enabling this feature increases the performance up to +30% depending on the task. The kernel enables the whole RAC unconditionally on BMIPS3300 CPUs. Enable the data RAC in a similar way also for BMIPS4350. Tested on DGND3700 v1 (BCM6368) and HG556a (BCM6358). Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit 6d1265b14850abaf8980e5cebef3e559b1fdcfb9)
* bmips: fix DMA RAC flushÁlvaro Fernández Rojas2023-06-191-0/+84
| | | | | | | BMIPS_GET_CBR() returns an invalid address on some SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 62cdca25edc7e02249a7dd01c2218ee83e6ed145)
* ramips: Add support for Beeline SmartBox TURBO+Maximilian Weinmann2023-06-176-9/+319
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for Beeline Smart Box TURBO+ (Serсomm S3 CQR) router. Device specification -------------------- SoC Type: MediaTek MT7621AT (880 MHz, 2 cores) RAM (Nanya NT5CC64M16GP): 128 MiB Flash (Macronix MX30LF1G18AC): 128 MiB Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2 Wireless 5 GHz (MT7615N): a/n/ac, 4x4 Ethernet: 5 ports - 5×GbE (WAN, LAN1-4) USB ports: 1xUSB3.0 Buttons: 2 button (reset, wps) LEDs: Red, Green, Blue Zigbee (EFR32MG1B232GG): 3.0 Stock bootloader: U-Boot 1.1.3 Power: 12 VDC, 1.5 A Installation (fw 2.0.9) ----------------------- 1. Login to the web interface under SuperUser (root) credentials. Password: SDXXXXXXXXXX, where SDXXXXXXXXXX is serial number of the device written on the backplate stick. 2. Navigate to Setting -> WAN. Add: Name - WAN1 Connection Type - Static IP Address - 172.16.0.1 Netmask - 255.255.255.0 Save -> Apply. Set default: WAN1 3. Enable SSH and HTTP on WAN. Setting -> Remote control. Add: Protocol - SSH Port - 22 IP Address - 172.16.0.1 Netmask - 255.255.255.0 WAN Interface - WAN1 Save ->Apply Add: Protocol - HTTP Port - 80 IP Address - 172.16.0.1 Netmask - 255.255.255.0 WAN interface - WAN1 Save -> Apply 4. Set up your PC ethernet: Connection Type - Static IP Address - 172.16.0.2 Netmask - 255.255.255.0 Gateway - 172.16.0.1 5. Connect PC using ethernet cable to the WAN port of the router 6. Connect to the router using SSH shell under SuperUser account 7. Make a mtd backup (optional, see related section) 8. Change bootflag to Sercomm1 and reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3 reboot 9. Login to the router web interface under admin account 10. Remove dots from the OpenWrt factory image filename 11. Update firmware via web using OpenWrt factory image Revert to stock --------------- Change bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3 mtd backup ---------- 1. Set up a tftp server (e.g. tftpd64 for windows) 2. Connect to a router using SSH shell and run the following commands: cd /tmp for i in 0 1 2 3 4 5 6 7 8 9 10; do nanddump -f mtd$i /dev/mtd$i; \ tftp -l mtd$i -p 172.16.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done tftp -l mtd.md5 -p 171.16.0.2 Recovery -------- Use sercomm-recovery tool. Link: https://github.com/danitool/sercomm-recovery MAC Addresses (fw 2.0.9) ------------------------ +-----+------------+---------+ | use | address | example | +-----+------------+---------+ | LAN | label | *:e8 | | WAN | label + 1 | *:e9 | | 2g | label + 4 | *:ec | | 5g | label + 5 | *:ed | +-----+------------+---------+ The label MAC address was found in Factory 0x21000 Factory image format -------------------- +---+-------------------+-------------+--------------------+ | # | Offset | Size | Description | +---+-------------------+-------------+--------------------+ | 1 | 0x0 | 0x200 | Tag Header Factory | | 2 | 0x200 | 0x100 | Tag Header Kernel1 | | 3 | 0x300 | 0x100 | Tag Header Kernel2 | | 4 | 0x400 | SIZE_KERNEL | Kernel | | 5 | 0x400+SIZE_KERNEL | SIZE_ROOTFS | RootFS(UBI) | +---+-------------------+-------------+--------------------+ Co-authored-by: Mikhail Zhilkin <csharper2005@gmail.com> Signed-off-by: Maximilian Weinmann <x1@disroot.org> (cherry picked from commit 8fcfb21b16e7537b9a871a1f67cb218c6be93149)
* rockchip: fix setup network config for nanopi r2cTianling Shen2023-06-171-0/+1
| | | | | | | | | Without it the WAN port won't be initialized properly. Fixes: 8f578c15b314 ("rockchip: add NanoPi R2C support") Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org> (cherry picked from commit d312f12b1a6ee41e7bf1e07ec0349e141c07b92e)
* kernel: bump 5.15 to 5.15.117John Audia2023-06-1710-382/+34
| | | | | | | | | | | | | | | | | Manually rebased: generic/backport-5.15/346-v5.18-01-Revert-ata-ahci-mvebu-Make-SATA-PHY-optional-for-Arm.patch Removed upstreamed: generic/backport-5.15/830-v6.2-ata-ahci-fix-enum-constants-for-gcc-13.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3 Run-tested: ramips/tplink_archer-a6-v3 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 0e89ba8430a5d9a638f71d9534ea4152fc26e278)
* kernel: bump 5.15 to 5.15.116John Audia2023-06-1711-16/+16
| | | | | | | | | | | All patches rebased automatically. Build system: x86_64 Build-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 5dc78d8f18e8f536317d9438b096a484a9c49862)
* kernel: add CONFIG_DRM_RCAR_USE_LVDS is not setJohn Audia2023-06-171-0/+1
| | | | | | | Added missing symbol. Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit fc3383a55877150ffe8068c46fe61f6881b1033c)
* kernel: bump 5.15 to 5.15.115John Audia2023-06-1735-471/+138
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Manually rebased: backport-5.15/603-v5.19-page_pool-Add-recycle-stats-to-page_pool_put_page_bu.patch pending-5.15/723-net-mt7531-ensure-all-MACs-are-powered-down-before-r.patch* Removed upstreamed: generic-backport/610-v6.3-net-page_pool-use-in_softirq-instead.patch[1] backport-5.15/705-12-v6.0-net-dsa-mt7530-rework-mt753-01-_setup.patch[2] backport-5.15/790-v6.4-0010-net-dsa-mt7530-split-off-common-parts-from-mt7531_se.patch[3] backport-5.15/703-10-v5.16-net-dsa-introduce-helpers-for-iterating-through-port.patch[4] All other patches automatically rebased. * Modified to define the variable i as suggested by DragonBluep in PR discussion. See: https://github.com/openwrt/openwrt/pull/12823#issuecomment-1578518576 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.115&id=3af319d5147454dc63665ef451229c674b538377 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.115&id=0753c1ef24194580f7165ae6e259b59a851392f2 3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.115&id=5a7266feaa6d708fc6880a161786eaa884ef3c8e 4. https://github.com/gregkh/linux/commit/9902f91cf666124a6b50bbcf483b46ecb09ef408 Build system: x86_64 Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 5714660643e9170920be2abbb2297d9aac0b9533)
* ipq806x: set PERFORMANCE as the default cpufreq governorChristian Marangi2023-06-161-2/+2
| | | | | | | | | | | | | | | | Move default cpufreq governor from ONDEMAND to PERFORMANCE. The temp increase is just 2°C and Watt usage the change is minimal in the order of additional millwatt. The SoC and krait in general looks to suffer for some problem with cache scaling. To have better system stability, force cpu freq and cache freq to the max value supported by the system. This follows mvebu platform where cpufreq is broken and cause minimal temp/watt increase. User can still tweak the governor to ondemand using sysfs entry if needed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 6f5ea752d7c95ba426ca21a6588cae8812bb3e7c)
* Revert "ipq806x: disable cache and fabric devfreq driver to improve stability"Christian Marangi2023-06-161-2/+2
| | | | | | | | | This reverts commit 60fc93b35935a88b1e31d853a0abacf0847d8de4. Reenable devfreq and revert for both 5.15 and 6.1. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 37e459321360aab13ed89647ed5c5033281047ae)
* bcm63xx: fix the Home Hub 2a power LEDDaniel González Cabanelas2023-06-161-1/+1
| | | | | | | | Power LED register is wrong at dts. Fix it. Fixes: 9ceeaf4c6cac ("brcm63xx: switch to hardware led controllers") Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit 0e01ba93610240ad84f9bbc5fc6e5982a07d39f9)
* bmips: add support for Comtrend VG-8050Álvaro Fernández Rojas2023-06-164-0/+258
| | | | | | | | | | | | | | | | | | | | | | | | | | | The Comtrend VG-8050 is a wifi gigabit ethernet router, 2.4 GHz single band with two external antennas. Hardware: - SoC: Broadcom BCM63169 - CPU: dual core BMIPS4350 @ 400Mhz - RAM: 128 MB DDR - Flash: 128 MB NAND - LAN switch: Broadcom BCM53125, 5x 1Gbit - Wifi 2.4 GHz: SoC (BCM63268) 802.11bgn - USB: 1x 2.0 (optional) - Buttons: 2x (reset) - LEDs: yes - UART: yes Installation via CFE web UI: 1. Power off the router. 2. Press reset button near the power switch. 3. Keep it pressed while powering up during ~20+ seconds. 4. Browse to http://192.168.1.1 and upload the firmware. 5. Wait a few minutes for it to finish. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 47cc09aa7a9a12cb7b18ef96f0b5d0bcb5d84b9e)
* bmips: dts: dgnd3700: fix WAN portÁlvaro Fernández Rojas2023-06-151-1/+1
| | | | | | | | All switch ports are labeled as port@address so let's follow the same pattern. Fixes: ed79519b8d89 ("bmips: add support for Netgear DGND3700 v1, DGND3800B") Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit d9210c5ff797896317d1b6293a5ad768b7482cfe)
* bmips: add support for Sercomm AD1018Álvaro Fernández Rojas2023-06-155-0/+353
| | | | | | | | | | | | | | | | | | | | | | | | | The Sercomm AD1018 is a wifi fast ethernet router, 2.4 GHz single band with two internal antennas. Hardware: - SoC: Broadcom BCM6328 - CPU: single core BMIPS4350 @ 320Mhz - RAM: 64 MB (v1) / 128 MB (v2) DDR - Flash: 128 MB NAND - Ethernet LAN: 4x 100Mbit - Wifi 2.4 GHz: miniPCI Broadcom BCM43217 802.11bgn - USB: 1x 2.0 - Buttons: 3x (reset) - LEDs: yes - UART: yes Installation via OEM web UI: 1. Use the admin credentials to login via web UI 2. Go to Managament->Update firmware and select the OpenWrt CFE firmware 3. Press "Update Firmware" button and wait some minutes until it finish Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 38ebb2eafde604ff6d9b0021d1d21208070a2d09)
* bmips: bump LOADER_ENTRY to RAM + 16MÁlvaro Fernández Rojas2023-06-151-1/+1
| | | | | | | | This is needed on devices like Sercomm AD1018 for booting recent kernels due to bigger kernels. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 434434ca4748ba669176ce38b70a6525f90598b6)
* bmips: add support for Actiontec R1000HDaniel González Cabanelas2023-06-155-0/+241
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Actiontec R1000H is a gigabit wifi router, 2.4 GHz single band with two external antennas. It comes with a coaxial HomePNA port. Hardware: - SoC: Broadcom BCM6368 - CPU: dual core BMIPS4350 V3.1 @400Mhz - RAM: 64 MB DDR - Flash: 32 MB parallel NOR - LAN switch: Broadcom BCM53115, 5x 1Gbit - LAN coaxial : 1x HPNA 3.1, CG3211 + CG3213 - Wifi 2.4 GHz: Broadcom BCM4322 802.11bgn - USB: 1x 2.0 - Buttons: 2x, 1 reset - LEDs: 7x - UART: yes The HPNA hardware probably needs a firmware to make the coaxial port work. In the OEM firmware, it's apparently sent with an utility (inhpna) through the ethernet port. Installation via CFE web UI: 1. Connect the UART serial port. 2. Power on the router and press enter at the console prompt to stop the bootloader. 4. Browse to http://192.168.1.1 and upload the OpenWrt CFE firmware 5. Wait a few minutes for it to finish Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com> (cherry picked from commit e1a55de7a7eafd40a4fab5f29153a1a3c3606818)
* bcm63xx: switch to standard nand_do_upgradeÁlvaro Fernández Rojas2023-06-151-37/+2
| | | | | | | | Now that JFFS2 cleanmarkers are supported on the standard nand_do_upgrade function we can start using it on bcm63xx. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from 60fc3bc9487cbda7092e1b926467b07ea041bc60)
* bmips: switch to standard nand_do_upgradeÁlvaro Fernández Rojas2023-06-154-45/+4
| | | | | | | | Now that JFFS2 cleanmarkers are supported on the standard nand_do_upgrade function we can start using it on bmips. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from 464dfac049daecad145184f8c2dd4a46a7fdd37c)
* bcm63xx: fix NETGEAR DGND3700v2 boot loopÁlvaro Fernández Rojas2023-06-151-0/+1
| | | | | | | | | | | | | The DGND3700v2 renames the cferam bootloader from cferam to cfeXXX, where XXX is the number of firmware upgrades performed by the bootloader. Other bcm63xx devices rename cferam.000 to cferam.XXX, but this device is special because the cferam name isn't changed on the first firmware flashing but it's changed on the subsequent ones. Therefore, we need to look for "cfe" instead of "cferam" to properly detect the cferam partition and fix the bootlop. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit cdfcac6e246de9f237d1425e498db3f34ddebbaf)
* bmips: fix NETGEAR DGND3700v2 boot loopÁlvaro Fernández Rojas2023-06-151-0/+1
| | | | | | | | | | | | | The DGND3700v2 renames the cferam bootloader from cferam to cfeXXX, where XXX is the number of firmware upgrades performed by the bootloader. Other bcm63xx devices rename cferam.000 to cferam.XXX, but this device is special because the cferam name isn't changed on the first firmware flashing but it's changed on the subsequent ones. Therefore, we need to look for "cfe" instead of "cferam" to properly detect the cferam partition and fix the bootlop. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 915e914cfaa243ea36f8c7a4f0f045ec890304fa)
* kernel: mtd: bcm-wfi: add cferam name supportÁlvaro Fernández Rojas2023-06-151-2/+14
| | | | | | | | | Some devices rename cferam bootloader using specific patterns and don't follow broadcom standards for renaming cferam files. This requires supporting different cferam file names. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 8813edd8d9695d4e3939fdaa3c530c682f91de11)
* sifiveu: add new target for SiFive U-based boardsZoltan HERPAI2023-06-1417-0/+1289
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | RISC-V is a new CPU architecture aimed to be fully free and open. This target will add support for it, based on 5.15. Supports running on: - HiFive Unleashed - FU540, first generation - HiFive Unmatched - FU740, current latest generation, PCIe SD-card images are generated, where the partitions are required to have specific type codes. As it is commonplace nowadays, OpenSBI is used as the first stage, with U-boot following as the proper bootloader. Specifications: HiFive Unleashed: - CPU: SiFive FU540 quad-core RISC-V (U54, RV64IMAFDC or RV64GC) - Memory: 8Gb - Ethernet: 1x 10/100/1000 - Console: via microUSB HiFive Unmatched: - CPU: SiFive FU740 quad-core RISC-V (U74, RV64IMAFDCB or RV64GCB) - Memory: 16Gb - Ethernet: 1x 10/100/1000 - USB: 4x USB 3.2 - PCIe: - 1x PCIe Gen3 x8 - 1x M.2 key M (PCIe x4) - 1x M.2 Key E (PCIe x1 / USB2.0) - Console: via microUSB Installation: Standard SD-card installation via dd-ing the generated image to an SD-card of at least 256Mb. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> (cherry picked from commit a3469a90c47edd94daae6a23b810b74cd8389ce3)
* uboot-armsr: add support for QEMU armv7/armv8Petr Štetiar2023-06-132-6/+6
| | | | | | | | | | | | Add new package so we can use self-compiled bootloader during QEMU based testing and development. Backported fix[1] is needed for EFI boot from virtio devices. 1. https://patchwork.ozlabs.org/project/uboot/patch/20230424134946.v10.7.Ia5f5e39c882ac22b5f71c4d576941b34e868eeba@changeid/ Signed-off-by: Petr Štetiar <ynezz@true.cz> (cherry picked from commit b8e3fa2d1205213c71bc356744e9bed6cd8e69f9)
* armsr: rename from armvirtMathew McBride2023-06-1319-34/+38
| | | | | | | | | | | | | | | | | | | Now that the armvirt target supports real hardware, not just VMs, thanks to the addition of EFI, rename it to something more appropriate. 'armsr' (Arm SystemReady) was chosen after the name of the Arm standards program. The 32 and 64 bit targets have also been renamed armv7 and armv8 respectively, to allow future profiles where required (such as armv9). See https://developer.arm.com/documentation/102858/0100/Introduction for more information. Signed-off-by: Mathew McBride <matt@traverse.com.au> (23.05 version of commit 40b02a230167626def69389452f19b7109aaeac1)
* kernel: kmod-amazon-ena: move to top level netdevicesMathew McBride2023-06-131-17/+0
| | | | | | | | | The Amazon ENA network devices are also used on the AWS Arm (Graviton) instance types, so move it from the x86-only module file to the top level netdevices. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 3a7c8fd15e89237c8c9db62393d057f3a47429d2)
* armvirt: 64: disable CONFIG_SMC91XMathew McBride2023-06-131-1/+1
| | | | | | | | | | The SMC91X family is a ISA-age Ethernet controller. I'm not particularly sure what it's doing in armvirt/64, as it's unlikely there is a QEMU or real hardware configuration that exists with it. Signed-off-by: Mathew McBride <matt@traverse.com.au> (23.05/5.15 version of commit 214e94cddf1bfd4e6141f79a70f532267fe1bea0)
* armvirt: base-files: add tty0 to inittabMathew McBride2023-06-131-0/+1
| | | | | | | tty0 is the default console for devices with screens/framebuffers. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit e41b82f619ca02f427f34ae439d4584ab441e245)
* armvirt: config changes required for framebuffer consoleMathew McBride2023-06-131-0/+13
| | | | | | | | | | These Kconfig options are required to get a screen console working with the VMware Fusion ARM (Apple Silicon) preview. They are likely to be the same for other Arm standard "desktop" hardware that may emerge. Signed-off-by: Mathew McBride <matt@traverse.com.au> (23.05/5.15 version of 83f564f7464c34c7713b20b61007b24b217f0b88)
* armvirt: package and select Rockchip DWMAC Ethernet driverMathew McBride2023-06-132-2/+13
| | | | | | | | | | | | | For devices that implement the "rockchip,*-gmac" compatible controller, including: - RK3328 - RK3399 - RK3568 - RK3588 - PX30 Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit abbffe55ddded36d2a4d0eee6e96c742eaffbbd2)
* armvirt: 64: add Allwinner A3/A83T/A64 (sun8i family) EthernetMathew McBride2023-06-132-1/+12
| | | | | | | | Add support for the dwmac (stmmac) variant used by Allwinner Arm64 boards. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 847467a5729995a98aa34329f6fa0ed4cb79d210)
* armvirt: 64: add Marvell (formerly Cavium) ThunderX series network driverMathew McBride2023-06-132-2/+20
| | | | | | | Based on working configuration supplied by Anton Antonov. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 5d2a5f739840caa6e72b5c907d355f6aaca227d4)
* armvirt: 64: Add storage support for qemu-sbsa platformAnton Antonov2023-06-131-0/+4
| | | | | | | | | | | Enable SATA support, which is used by the Server Base System Architecture reference board[1]. Signed-off-by: Anton Antonov <Anton.Antonov@arm.com> Signed-off-by: Mathew McBride <matt@traverse.com.au> [1] - https://qemu.readthedocs.io/en/latest/system/arm/sbsa.html (23.05/5.15 version of 26905c96124af10a795167509116252e9357baea)
* armvirt: 64: Add NXP i.MX 8M Mini/Nano/Quad/Plus EVK supportAnton Antonov2023-06-134-3/+155
| | | | | | | | | Also includes Advantech RSB-3720 (iMX8 Plus) support. Signed-off-by: Anton Antonov <Anton.Antonov@arm.com> Signed-off-by: Mathew McBride <matt@traverse.com.au> [Re-sort into kernel config, move network into modules] (23.05/5.15 version of commit 3efb3b801bb1393897ff58b9af3753157f28f441)
* armvirt: 64: add support for other SystemReady-compatible vendorsMathew McBride2023-06-134-3/+308
| | | | | | | | | | | | | | | | | | | | | | | | | | | These changes are to support other vendors that have SystemReady/EFI support, including: * Marvell Armada ** (This is speculative as I don't have a machine of my own to test) * Amazon Graviton (tested bare-metal and virtualized instances) * VMware (Fusion for ARM Mac preview) * NXP/Freescale (Layerscape series not already selected) * HiSilicon * Allwinner/sunxi * Rockchip (untested, options taken from arm64 defconfig) To give an idea of the hardware certified for SystemReady, see https://www.arm.com/architecture/system-architectures/systemready-certification-program/ir and https://www.arm.com/architecture/system-architectures/systemready-certification-program/es Other vendors that _should_ work include Marvell Octeon 10 and Ampere. I understand these systems should work "out of the box" in ACPI mode but may require other drivers (e.g PCIe NICs and storage controllers). Signed-off-by: Mathew McBride <matt@traverse.com.au> (23.05/5.15 version of c3151b6f04579a937b7cb166bbeff0d0ee539946)
* armvirt: add options and driver modules for NXP Layerscape DPAA2 platformMathew McBride2023-06-134-5/+157
| | | | | | | Tested with a Traverse Technologies Ten64 (LS1088A) board. Signed-off-by: Mathew McBride <matt@traverse.com.au> (23.05/5.15 version of commit 54bb95f879aaa62c4253d30390e77bc8180f4ed7)
* armvirt: add 5.15 patches for NXP DPAA2 platformMathew McBride2023-06-132-0/+108
| | | | | | | | | | | | This fixes an issue with NXP's DPAA2 platforms (LS1088/2088/LX2160) * A deadlock issue when attempting to detach the SFP management from a PHY interface (e.g when trying to reboot). These issues were fixed in kernel 6.2[1], but it's version does not cleanly apply onto 5.15. Signed-off-by: Mathew McBride <matt@traverse.com.au> [1] - see patch series "Fix rtnl_mutex deadlock with DPAA2 and SFP modules", https://patchwork.kernel.org/project/netdevbpf/cover/20221129141221.872653-1-vladimir.oltean@nxp.com/
* armvirt: add ACPI supportMathew McBride2023-06-132-1/+140
| | | | | | | | | | | ACPI support is required for Arm 'SystemReady' server and workstation systems (and as an option on embedded platforms). These config changes allow OpenWrt to boot in a QEMU virtual machine with a UEFI/EDKII 'BIOS', but with no other hardware enabled yet. Signed-off-by: Mathew McBride <matt@traverse.com.au> (23.05/5.15 version of cb3bbbf00cfb465de3333e4b84e8da9138985595)
* build: enable vmdk/vmware images for arm64 targetMathew McBride2023-06-131-1/+1
| | | | | | | This is useful for VMware's ARM64 products, e.g Fusion for M1/ARM Macs. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit f899e0e024825861e129b0e8fbfb31c1d614273a)
* armvirt: remove model name overrideMathew McBride2023-06-131-13/+0
| | | | | | | | Now that armvirt has been expanded to boot on more generic ARM machines, remove the board and model name override. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 3d99314569a059a1d5e015086e534b3e04ff2097)
* armvirt: set kernel partition as the EFI system partitionMathew McBride2023-06-131-1/+1
| | | | | | | | U-Boot with EFI boot manager functionality will store EFI boot order data on the ESP in the ubootefi.var file. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 9a76b99c1bd781248c18d69abe570f35932db8a3)
* armvirt: update README with new image namesMathew McBride2023-06-131-8/+40
| | | | | | | | | The introduction of EFI support has changed how armvirt images are generated. The kernel and filesystem binaries can still be used as before with QEMU directly. Signed-off-by: Mathew McBride <matt@traverse.com.au> (cherry picked from commit 97c5d317f59e071c9f691add5748a74a75665038)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 02:53:10 +0000