aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux
Commit message (Collapse)AuthorAgeFilesLines
* ramips: remove erroneous "wdt rst" DTS entriesKevin Darbyshire-Bryant2017-10-253-3/+3
| | | | | | | | | | | | Remove reference to pinmux group "wdt rst" on EW1200, ZBT-WG2626 and ZBT-WG3526 devices. "wdt rst" is a pinmux function and not a pinmux group. Fixes the following error message during boot: rt2880-pinmux pinctrl: invalid group "wdt rst" for function "gpio" Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ipq806x: fix Zyxel NBG6817 WiFi buttonTolga Cakir2017-10-251-2/+3
| | | | | | | | Zyxel NBG6817 features a WiFi button, which becomes functional by setting correct GPIO. It is a switch-type button, so it emits KEY_RFKILL on each ON and OFF state. This is achieved by setting input-type to EV_SW. Signed-off-by: Tolga Cakir <tolga@cevel.net>
* ar71xx: fix LED names for GL-AR150Paul Wassi2017-10-253-4/+12
| | | | | | | Add the respective colour to the LED's names for the GL-AR150 to be conform to the kernel. Also add netdev triggers for the LAN and WAN LED. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: base-files: alphabetical reorderingPaul Wassi2017-10-257-98/+88
| | | | | | | Re-order the cases of base-files/* alphabetically. Also merge some cases in diag.sh Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* mpc85xx: use image metadataMathias Kresin2017-10-252-92/+7
| | | | | | | Append and enforce image metadata. Remove the device specific image checks, they are replaced by image metadata. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mpc85xx: use the generic board detectMathias Kresin2017-10-257-53/+9
| | | | | | | | | | | | Use the values populated by the generic board detect function. The first compatible from the device tree source file will be the board name in userspace. The model property from the device tree source file will be the model name. Change the board name where used in the userspace and drop the target specific board detect, to use the generic one. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mpc85xx: fix TL-WDR4900 v1 compatible stringMathias Kresin2017-10-252-2/+2
| | | | | | | Use the vendor as it is listed in vendor.txt. Use a standard lower case compatible string. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mpc85xx: update HiveAP-330 dtsChris Blake2017-10-252-22/+6
| | | | | | | | | | | | | | | | | | | initramfs is not the proper name for this, as it stores a boot ramdisk and not a filesystem. Update the name to reflect it's usage correctly. If CMDLINE_OVERRIDE is enabled, the chosen bootargs aren't used at all. Drop them from the device tree source file to not cause confusion. Remove the noinitrd bootarg. Due to the empty ramdisk this parameter isn't required any longer: [ 0.000000] Initrd not found or empty - disabling initrd Use the LEDE mtd-mac-address* device tree properties to set the interfaces MAC-Addresses. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* mpc85xx: cleanup kernel configMathias Kresin2017-10-253-17/+29
| | | | | | | | | | | Move the kernel config changes added with the HiveAP 330 to the subtarget the board belongs to instead of changing the target kernel config. While at it, move the TL_WDR4900_V1 config symbol to the containing subtarget and disable boards we don't support. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mpc85xx: use new build code styleChris Blake2017-10-257-127/+74
| | | | | | | | | | The following moves the mpc85xx target (generic & P1020) to the new build code style. Compile & Flash tested on an Aerohive HiveAP-330. Signed-off-by: Chris Blake <chrisrblake93@gmail.com> Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: don't enable usb for the WT3020-4MMathias Kresin2017-10-252-9/+8
| | | | | | | | | That device does not have a USB port. It as the same board as the WT3020-8M, but without soldered USB port port. Also the case lacks the opening for the port. Reported-by: Alberto Bursi <alberto.bursi@outlook.it> Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix default usb support for nexx wt3020-8MAlberto Bursi2017-10-251-0/+1
| | | | | | | the nexx wt3020-8M has a usb 2.0 port, add usb 2.0 support packages to its default package list. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* lantiq: xway: rename nas0/ptm0 to dsl0Mathias Kresin2017-10-253-9/+2
| | | | | | | | | | | This change makes it possible to configure the wan/dsl ppp interface settings independantly from the used TC-Layer (ATM/PTM). By using dsl0 as interface name as for the xrx200 we can get rid of a few conditionals which were introduced because of the different default TC-Layer in xway and xrx200. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: match default adsl annex and firmwareMathias Kresin2017-10-251-2/+31
| | | | | | | | | | Set a default Annex matching the the annex of the selected adsl firmware. Set Annex B for xrx200 board which are known to have an ADSL hybrid for Annex B. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: add missing default lan interfaceMathias Kresin2017-10-251-0/+2
| | | | | | | | | With removing the boards from the the default case to fix the xDSL WAN MAC-Address, the setting for the default LAN interface wasn't added. Fixes: 92a12c434ca3 ("lantiq: fix avm fritz box mac addresses") Signed-off-by: Mathias Kresin <dev@kresin.me>
* bcm53xx: Fix Generic profile descriptionFlorian Fainelli2017-10-241-2/+3
| | | | | | Fix the sentence describing the bcm53xx generic profile. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* orion: Switch to 4.9 kernelFlorian Fainelli2017-10-241-1/+1
| | | | Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* orion: Add support for 4.9 kernelFlorian Fainelli2017-10-246-0/+946
| | | | Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* uml: Switch to 4.9 kernelFlorian Fainelli2017-10-241-1/+1
| | | | Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* uml: Add 4.9 kernel patchesFlorian Fainelli2017-10-246-0/+646
| | | | | | | 102-pseudo-random-mac.patch required an update to the new style asynchronous crypto Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* pending-4.9: 610-netfilter_match_bypass_default_check: fix 32bit compat layerHans Dedecker2017-10-241-4/+21
| | | | | | | | | | Patch 610-netfilter_match_bypass_default_check added an extra flag IPT_F_NO_DEF_MATCH which is copied to user space in function copy_entries_to_user. The 32bit compat layer function was missing the same logic to copy the flag IPT_F_NO_DEF_MATCH to user space for a 64bit kernel and 32 bit user space. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> Signed-off-by: Thierry Dutre <thierry.dutre@dtsystems.be>
* pending-4.4: 610-netfilter_match_bypass_default_check: fix 32bit compat layerHans Dedecker2017-10-241-4/+21
| | | | | | | | | | Patch 610-netfilter_match_bypass_default_check added an extra flag IPT_F_NO_DEF_MATCH which is copied to user space in function copy_entries_to_user. The 32bit compat layer function was missing the same logic to copy the flag IPT_F_NO_DEF_MATCH to user space for a 64bit kernel and 32 bit user space. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> Signed-off-by: Thierry Dutre <thierry.dutre@dtsystems.be>
* pending-3.18: 610-netfilter_match_bypass_default_check: fix 32bit compat layerHans Dedecker2017-10-241-4/+21
| | | | | | | | | | Patch 610-netfilter_match_bypass_default_check added an extra flag IPT_F_NO_DEF_MATCH which is copied to user space in function copy_entries_to_user. The 32bit compat layer function was missing the same logic to copy the flag IPT_F_NO_DEF_MATCH to user space for a 64bit kernel and 32 bit user space. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> Signed-off-by: Thierry Dutre <thierry.dutre@dtsystems.be>
* ar71xx: re-enable 4k sectors for the mikrotik subtargetsFelix Fietkau2017-10-241-0/+1
| | | | | | | | On RB91x (and possibly others), there is a small SPI flash to store boot loader and configuration. It needs 4K sectors to be able to write the configuration using rbcfg Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix mikrotik routerboard nand driver issues with linux 4.9Felix Fietkau2017-10-243-27/+108
| | | | | | The mtd device is now embedded inside the nand chip data structure Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: fix secondary gpio controller base valuesFelix Fietkau2017-10-245-29/+29
| | | | | | | | In 4.9, gpio count is rounded up to 32 due to the use of bgpio in the ath79 gpio controller driver. Fix base values in mach files to account for that Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: lzma loader use LTOJulien Dusser2017-10-241-3/+5
| | | | | | | Change the Makefile to use LTO for better code optimisations. Gains are very low, only 270 bytes saved, but it's only Makefile changes. Signed-off-by: Julien Dusser <julien.dusser@free.fr>
* ar71xx: fix lzma loader performance issuesJulien Dusser2017-10-241-0/+13
| | | | | | | | | | | Some bootloaders set a cache cohenrency to a very slow mode. Use code from Linux kernel to set it to "Cacheable, noncoherent, write-back, write allocate". Perfomance impact is significant on TP-Link EAP245 board, kernel decompression time fall from 33 seconds to less than 1. Signed-off-by: Julien Dusser <julien.dusser@free.fr>
* bcm53xx: Fix SmartRG SR400AC initramfs imageFlorian Fainelli2017-10-231-0/+2
| | | | | | | The SmartRG SR400AC CFE does not accept a TRX image, just a normal binary image. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
* kernel: bump 4.9 to 4.9.58Stijn Tintel2017-10-238-215/+193
| | | | | | | | Refresh patches. Compile-tested: ar71xx, octeon, x86/64. Runtime-tested: octeon, x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* brcm2708: restore /boot/config.txt before rebootStijn Tintel2017-10-232-0/+2
| | | | | | | | | | | | | | The Raspberry Pi bootloader reads configuration values from config.txt in the boot partition. This file allows to specify the amount of memory to assign to the GPU, the license keys for hardware MPEG-2 and VC-1 decoding, Device Tree parameters and overlays, and lots of other things. Since sysupgrade only restores the configuration after booting the newly flashed image, these values will not be active, even if sysupgrade would save /boot/config.txt. To solve this, add the file to the files to be backed up, and restore it in platform_copy_config, before reboot. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ar71xx: deactivate some boards with too small kernel partitionsHauke Mehrtens2017-10-223-5/+2
| | | | | | | | | | | | | | | | | | | This affects the following boards: * dr344 * archer-c58-v1 * archer-c60-v1 * tl-wr902ac-v1 * tl-wr942n-v1 * ubnt-uap-pro * ubnt-unifi-outdoor-plus The build fails for any of these boards because the resulting kernel image will not fit into the kernel partition. When CONFIG_KERNEL_KALLSYMS is not set it could be that the kernel will fit onto the board again, this is the case for release images. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: use kernel 4.9 by defaultHauke Mehrtens2017-10-221-1/+1
| | | | | | | | | Kernel 4.9 support was added about 2 weeks ago and we haven't seen any major regression so far. This patch was not ported to kernel 4.9, this needs some additional work: 821-serial-core-add-support-for-boot-console-with-arbitr.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91: remove unused at91part driverHauke Mehrtens2017-10-221-122/+0
| | | | | | | There is no patch in the kernel 4.4 and 4.9 patches which adds this driver to the build system. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* at91: update to kernel 4.9Hauke Mehrtens2017-10-229-23/+26
| | | | | | | This brings the at91 target to kernel 4.9. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Ben Whitten <ben.whitten@gmail.com>
* kernel: add config optionHauke Mehrtens2017-10-221-0/+1
| | | | | | | | When the kmod-at91-adc package is activated for the at91 target the new option CONFIG_AT91_SAMA5D2_ADC is selectable and not handled. Add this option to the kernel 4.9 configuration. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ar71xx: add support for TP-LINK Archer C7 v4Felix Fietkau2017-10-1911-2/+292
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link Archer C7 v4 is a dual-band AC1750 router, based on Qualcomm/Atheros QCA9561+QCA9888. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 5x 10/100/1000 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction: 1. Upload lede-ar71xx-generic-archer-c7-v4-squashfs-factory.bin via Web interface Flash instruction using TFTP recovery: 1. Set PC to fixed ip address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c7-v4-squashfs-factory.bin and rename it to ArcherC7v4_tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold Reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery. Flash instruction under U-Boot, using UART: 1. tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin 2. erase 0x9f040000 +$filesize 3. cp.b $fileaddr 0x9f040000 $filesize 4. reset Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ar71xx: add support for Nokia WI2A-AC200iFelix Fietkau2017-10-1914-0/+286
| | | | | | | | | | | | | | | | | Specifications: - SoC: Qualcomm QCA9558 (720 MHz) - RAM: 256MB - Storage: 1MB NOR, 128 MB NAND flash - Ethernet: 1x1000M Installation: 1. Connect to serial console on the board 2. Boot initramfs image over u-boot 3. Copy image to the device and run sysupgrade Installation without serial console is not supported at this time Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcm47xx: use kernel 4.9 by defaultHauke Mehrtens2017-10-181-1/+1
| | | | | | | | Kernel 4.9 is now working on the brcm47xx boards, we just recently fixed the problem that some boards did not boot at all, by changing the memory regions used to relocate the kernel to in the loader. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: fix ftrace support on 4.9Felix Fietkau2017-10-181-0/+27
| | | | | | | | When porting the kernel patches from 4.4 to 4.9, they were missing a small chunk that ensures that ftrace sections are kept in the vmlinux image, even when linked with --gc-sections Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: ARV752DPW22: fix wireless mac addressMathias Kresin2017-10-181-0/+1
| | | | | | | | | | The ARV752DPW22 has the same generic mac address in the EEPROM as it was already noticed for other lantiq boards using a ralink wireless. Use the base mac address from the boardconfig partition as it is done by the stock firmware. Signed-off-by: Mathias Kresin <dev@kresin.me>
* lantiq: ARV752DPW22: set correct wireless led triggerMathias Kresin2017-10-181-0/+3
| | | | | | | The ARV752DPW22 has a ralink based wireless and can not use the ath9k only phy0tpt trigger. Signed-off-by: Mathias Kresin <dev@kresin.me>
* omap: clean up configurationHauke Mehrtens2017-10-182-17/+1
| | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Alexander Couzens <lynxis@fe80.eu>
* omap: Add support for kernel 4.9Hauke Mehrtens2017-10-184-1/+759
| | | | | | | | | | | | | | | | This adds support for kernel 4.9 and replaces the kernel 4.4 support. These are lynxis test results: panda-board a3 - works, but no network, but master/4.4 doesn't have network either. panda-board-a4 - u-boot SPL refuse to boot. beaglebone-black - works beagle-board - usb attached network doesn't come up and I doesn't have a serial around. beagle-board-xm - ToDo: image code is missing. Kernel 4.4 does not look better, so we merge this anyway. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Alexander Couzens <lynxis@fe80.eu>
* kernel: bump 4.9 to 4.9.57Kevin Darbyshire-Bryant2017-10-1821-234/+250
| | | | | | | | | | | | | | | | Refresh patches. Compile-tested for ar71xx - Archer C7 v2 Runtime-tested on ar71xx - Archer C7 v2 Fixes the following CVEs: - CVE-2017-7518 - CVE-2017-0786 - CVE-2017-1000255 - CVE-2017-12188 - CVE-2017-15265 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* Revert "ar71xx: Add GRO support to ag71xx"Felix Fietkau2017-10-171-3/+3
| | | | | | | | | | This reverts commit 13e5e473699b92f171205e0f5c57c9ebe7922492. This commit causes a severe regression in LAN->WAN routing performance for several devices. This appears to be caused by the extra requirement to validate the SKB checksum early in the rx path, which the ethernet hardware does not do Signed-off-by: Felix Fietkau <nbd@nbd.name>
* at91: fix legacy buildHauke Mehrtens2017-10-161-2/+1
| | | | | | | | | | | The build system took the DTB_SIZE definition from Default and not from production-dtb under some conditions. Move the size definitions to Default now as it is only used in production-dtb anyway. Thanks Mathias Kresin for helping me with this. Fixes: c2f052acaeb ("at91: convert boards to generic build target") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ramips: fix typo in MT7621 NAND driverFelix Fietkau2017-10-161-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* malta: activate some more standard kernel featuresHauke Mehrtens2017-10-151-5/+0
| | | | | | | | These options where deactivated in the malta kernel, take the default options form the generic kernel configuration now to better match the other targets. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* malta: upgrade to kernel 4.9Hauke Mehrtens2017-10-156-44/+32
| | | | | | This brings the MIPS malta target to kernel 4.9. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 09:20:39 +0000