aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/sunxi
Commit message (Collapse)AuthorAgeFilesLines
* target: disable CONFIG_PROC_PAGE_MONITOR on most targetsJo-Philipp Wich2018-01-131-2/+0
| | | | | | | | | | Disable CONFIG_PROC_PAGE_MONITOR in most places and only keep it enabled for virtual targets such as malta or potent ones like x86. This saves up to 4KB of uncompressed kernel size and significantly decreases CPU load under certain workloads. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* sunxi: enable missing config symbolJo-Philipp Wich2018-01-111-0/+1
| | | | | | | | Enable CONFIG_MFD_AXP20X_I2C after the switch to Kernel 4.9, this symbol is reportedly required to get USB working on the Banana Pi. Ref: https://forum.lede-project.org/t/sunxi-kernel-4-9-usb-not-working/10513 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* kernel: move CONFIG_KASAN to generic configStijn Tintel2018-01-021-1/+0
| | | | | | | | | | While bumping 4.14, the kernel build failed due to missing CONFIG_KASAN symbol. Move it to generic config instead of defining it for all arm64 and x86/64 targets. It was only added in 4.0, so not needed in config-3.18. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: Update kernel 4.9 to 4.9.70Hauke Mehrtens2017-12-194-119/+119
| | | | | | Runtime tested on lantiq. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.9 to 4.9.65Stijn Tintel2017-11-241-204/+182
| | | | | | | | Refresh patches. Compile-tested: ar71xx, octeon, x86/64. Runtime-tested: ar71xx, octeon, x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* sunxi: remove support for kernel 4.4Hauke Mehrtens2017-11-2328-4295/+0
| | | | | | | Kernel 4.9 is working good on this target, remove support for kernel 4.4 now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: backport sunxi-mmc controller driver from 4.13Hauke Mehrtens2017-11-231-0/+288
| | | | | | | There are multiple problems on the A64 SoC with the older drivers which are fixed in the upstream kernel. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 4.9 to 4.9.63Koen Vandeputte2017-11-221-182/+204
| | | | | | | | | | | Refreshed all patches. Removed upstreamed parts. Compile-tested: cns3xxx, imx6, mvebu, layerscape Run-tested: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* sunxi: add support for NanoPi M1 Plus boardLuis Araneda2017-11-173-0/+340
| | | | | | | | | | | | | | | | | | | | | | | | Backported devicetree from Kernel 4.13 with some additions to enable Ethernet and WiFi module The following features are working: - Ethernet - WiFi - eMMC and microSD slot - USB ports The following features are not working: * Bluetooth NanoPi M1 Plus key features - SoC: Allwinner H3, Quad-core Cortex-A7@1.2GHz - RAM: 1GB DDR3 - eMMC: 8GB - microSD slot - Ethernet 10/100/1000M - Wifi: AP6212 Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* sunxi: base files: add AP6212 (brcm43430) NVRAMLuis Araneda2017-11-171-0/+53
| | | | | | Used by the NanoPi M1 Plus board Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* sunxi: add Orange Pi 2 supportZoltan HERPAI2017-11-061-0/+9
| | | | | | | | | | | | | - H3 @ 1.3 GHz - 1GiB DDR3 - 10/100Mbps Ethernet - Realtek RTL8189ETV wifi - 4 USB 2.0 Difference to the "Orange Pi Plus" is the lack of Gbit ethernet and lack of onboard flash. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* sunxi: Added profile for HAOYU Electronics Marsboard A10Kayo Phoenix2017-11-061-0/+10
| | | | | | | | | The MarsBoard was a short-lived credit-card sized, extendable board with an Allwinner A10 SoC. http://linux-sunxi.org/MarsBoard_A10 Signed-off-by: Kayo Phoenix <kayo@illumium.org> [Forward-ported to new target layout:] Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* kernel: bump 4.9 to 4.9.58Stijn Tintel2017-10-231-204/+182
| | | | | | | | Refresh patches. Compile-tested: ar71xx, octeon, x86/64. Runtime-tested: octeon, x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.9 to 4.9.57Kevin Darbyshire-Bryant2017-10-183-190/+208
| | | | | | | | | | | | | | | | Refresh patches. Compile-tested for ar71xx - Archer C7 v2 Runtime-tested on ar71xx - Archer C7 v2 Fixes the following CVEs: - CVE-2017-7518 - CVE-2017-0786 - CVE-2017-1000255 - CVE-2017-12188 - CVE-2017-15265 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* sunxi: backport support for Allwinner Security System PRNGLucian Cristian2017-10-153-0/+208
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* sunxi: build image for the NanoPi NEODaniel Golle2017-10-081-0/+9
| | | | | | | The NanoPi NEO is a small Allwinner H3 based board available with different DRAM configurations. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* sunxi: kernel: add patches for NanoPi NEODaniel Golle2017-10-082-0/+108
| | | | | | | Enable dwmac-sun8i Ethernet core to use the built-in FastEthernet port. Enable exposed UART, USB and I2C pins. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: update and refresh patchesStijn Tintel2017-10-081-9/+0
| | | | | | | | | | The lantiq patch 0028-NET-lantiq-various-etop-fixes.patch and sunxi patch 0051-stmmac-form-4-11.patch no longer applied after applying the the "generalize napi_complete_done()" patch. Update them so they apply, and refresh patches while at it. Fixes: 9aeb7ce8dc5 ("generic: net: generalize napi_complete_done") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* sunxi: add Orange Pi R1 supportHauke Mehrtens2017-10-012-0/+206
| | | | | | | | | | | | | | | The following features are working and tested: * both Ethernet ports * MMC * LED The following features are not working: * Wifi (There is a crappy driver we could port) * SPI flash (I haven't looked into this) I haven't tried out the rest. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: H3: add device tree changes for H3 EthernetHauke Mehrtens2017-10-015-0/+229
| | | | | | | This adds the device tree changes needed to make the GMAC stmmac driver working for the Allwinner H3 SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: A64: add device tree changes for A64 EthernetHauke Mehrtens2017-10-016-0/+241
| | | | | | | This adds the device tree changes needed to make the GMAC stmmac driver working for the Allwinner A64 SoCs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: backport the stmmac driver from kernel 4.13Hauke Mehrtens2017-10-017-0/+13682
| | | | | | | | | | | This adds support for the GMAC which is use in the A64 and other Allwinner chips by backporting the changes from the kernel versions 4.13. Some commits are not backported which are adding support for newly introduced APIs which are not available in kernel 4.9. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add Olimex A20-OLinuXino-LIME2-eMMCLucian Cristian2017-09-241-0/+10
| | | | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com> [replaced u-boot patch with original version from u-boot git] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add Olimex A20-OlinuXino-LIME2Lucian Cristian2017-09-181-0/+10
| | | | Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
* sunxi: Add A64 support with cortex53 subtargetHauke Mehrtens2017-09-185-1/+135
| | | | | | | | | | | | This adds initial support for the A64 Allwinner SoC to LEDE. It will be build in the new cortexa53 subtarget. Currently it only supports the pine64 and the image is able to boot on this SoC. Camera, Ethernet, HDMI and other parts are currently not working. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: Backport patches from kernel 4.11 for A64Hauke Mehrtens2017-09-1814-0/+640
| | | | | | | This backports some more patches from kernel 4.11 adding more devices to the device tree of the A64 SoC. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: Backport patches needed for A64Hauke Mehrtens2017-09-1825-0/+4665
| | | | | | | | This backports multiple patches from kernel 4.10 which are adding missing support for the A64 and the pine64 board. These are the device tree files, the pinctlk and the clock driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: split into cortex A8 and A7 subtargetHauke Mehrtens2017-09-188-151/+223
| | | | | | Now we can activate some compiler optimizations for the cortex A7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: fix build of rtc package when module not availableHauke Mehrtens2017-09-181-2/+2
| | | | | | | If the Kconfig option CONFIG_RTC_DRV_SUNXI is not selected this package should be be build. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: add support for kernel 4.9Hauke Mehrtens2017-09-184-1/+689
| | | | | | | Most of the patches were backpoprts from the mainline kernel and are integrated upstream now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: drop target board_name functionsMathias Kresin2017-07-151-10/+0
| | | | | | They are not used any longer. Signed-off-by: Mathias Kresin <dev@kresin.me>
* treewide: use the generic board_name functionMathias Kresin2017-07-152-4/+4
| | | | | | Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me>
* sunix: run b53_hack laterMathias Kresin2017-07-151-0/+0
| | | | | | | The script relies on the board name but runs prior the generic sysinfo script which sets the board name. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kernel: cleanup CONFIG_SCHED_HRTICKStijn Tintel2017-06-291-1/+0
| | | | | | | Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the generic config in b47fd7656336162360ebf66147326763ddae3f8d. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* sunxi: sysupgrade: sync with x86Matthias Schiffer2017-05-292-50/+72
| | | | | | | | | | | | sunxi sysupgrade was based on the x86 implementation; sync fixes and other changes from the current x86 version: x86: fix sysupgrades on disks with 4k block size x86: sysupgrade: move partition table change check to platform_check_image x86: sysupgrade: refactor platform_do_upgrade x86: sysupgrade: explicitly rescan disk after writing partition table Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* sunxi: sysupgrade: don't write partitions twiceMatthias Schiffer2017-05-291-1/+1
| | | | | | | | | | | | | | When existing partitions are retained, the dd call writing the uboot image in the space before the first partition was accidentally writing the whole image, making the code for individual partitions redundant. Limit the copy to 1016KiB (the first 8KiB are skipped, and the first partition starts at 1024KiB). In addition, conv=notrunc is replaced with conv=fsync. It seems this was an oversight, as notrunc doesn't make sense for block devices and all other dd commands use conv=fsync. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: update kernel 4.4 to version 4.4.69Kevin Darbyshire-Bryant2017-05-213-4/+4
| | | | | | | | | | | | | | | | | | | Refresh patches. A number of patches have landed upstream & hence are no longer required locally: 062-[1-6]-MIPS-* series 042-0004-mtd-bcm47xxpart-fix-parsing-first-block Reintroduced lantiq/patches-4.4/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup as it was incorrectly included upstream thus dropped from LEDE. As it has now been reverted upstream it needs to be included again for LEDE. Run tested ar71xx Archer C7 v2 and lantiq. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> [update from 4.4.68 to 4.4.69] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: clean up modules definitionsMatthias Schiffer2017-05-043-45/+5
| | | | | | | | | | | | | | | | | | Module definitions for kmod-wdt-sunxi and kmod-eeprom-sunxi are removed (wdt-sunxi was builtin anyways; nvmem-sunxi, which is the new name of eeprom-sunxi is changed to builtin). As kmod-eeprom-sunxi was specified in DEFAULT_PACKAGES, but not available on kernel 4.4, it was breaking the image builder. Support for kmod-sunxi-ir is added for kernel 4.4 (it is unclear why it was disable before, it builds fine with with kernel 4.4). Condtionals only relevant for pre-4.4 kernels are removed from modules.mk, as sunxi does't support older kernels anymore. Fixes FS#755. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: remove out of tree direct-io disable hackFelix Fietkau2017-04-261-1/+0
| | | | | | | Direct-IO support has to be enabled for the release build anyway, so this hack is not worth keeping Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: get rid of host.mkFelix Fietkau2017-02-261-1/+0
| | | | | | Defined required host related variables in toplevel.mk instead Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sunxi: put u-boot images into image staging directoryJo-Philipp Wich2017-01-271-2/+2
| | | | | | | | | | | | Do not put the u-boot images into the kernel build directory as this directory might get removed after kernel updates while the u-boot packages InstallDev recipe is not getting re-executed because it is still considered current, leading to image build failures later on due to missing images. To ensure that built bootloader images persist over kernel version updates in the buildroot, put them into the new STAGING_DIR_IMAGE directory. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uboot-sunxi: clean up, switch to u-boot.mkFelix Fietkau2017-01-242-33/+17
| | | | | | | | Instead of referencing u-boot packages from device profiles and having a -all metapackage, make the u-boot packages hidden (they don't install to bin/ anyway), and name the files in KERNEL_BUILD_DIR appropriately Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sunxi: use fwtool for checking sdcard imagesYousong Zhou2017-01-055-153/+19
| | | | | | | | | | | | | | To achieve this, device tree compatible string was used as boardname and the value of it will be checked against supported_devices list. It should be noted that we do not distinguish between sun5i-a13-olimex-som and sun5i-a13-olinuxino as they share the same dts file. The other thing is that we need to gunzip the generated firmware to do fwtool check. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: add sysupgrade supportYousong Zhou2017-01-053-0/+91
| | | | | | | Enalbe builtin support for FAT filesystem as we need to mount boot partition to store sysupgrade.tgz there Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: make sdcard image with squashfs as rootfsYousong Zhou2017-01-051-1/+2
| | | | | | | | | | | | | Two things that need to be noted - There is no partition type id allocated for squashfs yet. In the case of sunxi, any non-zero value should work and we keep it 83 (the value for ext4) - Remaining spare space within the rootfs partition, not the entire sdcard space will be formated as either f2fs or ext4 and mounted as overlay to serve the role of rootfs_data. Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: convert to new image generation methodYousong Zhou2017-01-0518-363/+171
| | | | | | | | | | | The new Device/xxx were transformed automatically from old profiles. Most device names are now taken from basename of the corresponding kernel device tree file. Device/sun5i-a13-olimex-som is an exception because it is not explicitly supported in the kernel yet and shares the same dts file with Device/sun5i-a13-olinuxino Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: enable loopback device and f2fs supportYousong Zhou2017-01-051-0/+14
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: fix dts name for Mele M9Yousong Zhou2017-01-051-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* sunxi: enable CONFIG_VHOST_NET like on x86Felix Fietkau2016-11-241-2/+1
| | | | | | | Other virtualization options are already enabled, so this is only a small addition Signed-off-by: Felix Fietkau <nbd@nbd.name>
* target: sunxi: enable builtin crypto-hw module sun4i-ssYousong Zhou2016-11-241-0/+5
| | | | | | | CONFIG_CRYPTO_DEV_SUN4I_SS was previously set to y but did not take effect because of the absence of CONFIG_CRYPTO_HW=y Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 09:35:26 +0000