aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
Commit message (Collapse)AuthorAgeFilesLines
* ramips: change vlan_config for the ALFA W502U boardGabor Juhos2012-01-311-1/+1
| | | | | | This change moves the WAN port into a separate VLAN. SVN-Revision: 29969
* ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boardsGabor Juhos2012-01-2611-0/+212
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the Sitecom WL-341 v3 and other Sercomm IP1006RRv2 based boards for sysupgrade support and for the initial flash through pushbutton initiated recovery mode with the special partition table and fixes for the quirks and things required by the modified bootloader. There is a known bug, Wi-Fi is not working on my board probably because of the lack of RAM (the board only has 16MiB ram -- half of the normal amount for non rebadged versions, but there is an empty slot for another ram chip,) but I don't know for sure. The driver loads but hostapd fails to load so I think it's not related to the specific device except for the lack of RAM. Moreover, only 7 of the 11 onboard leds are confirmed working, it seems that one of the others is always on and the remaining ones are connected to the wireless card leds already recognized by OpenWrt [juhosg: reordered some parts in order to keep things sorted alphabetically] Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com> SVN-Revision: 29910
* ramips: generate sysupgrade image for the ALL0256NGabor Juhos2012-01-241-0/+5
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29884
* ramips: add user-space support for ALL0256NGabor Juhos2012-01-246-1/+20
| | | | | | | | This adds uci-defaults and sysupgrade support for the ALL0256N. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29883
* ramips: add kernel support for ALL0256NGabor Juhos2012-01-245-0/+136
| | | | | | Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 29882
* ramips: scripts updatesGabor Juhos2012-01-236-23/+47
| | | | | | | | | | | | | | | | | | | | | | | | In this patch: * rename Argus leds to avoid underscores * rename Belkin F5D8235 v1 leds from f5d8234 to f5d8235 * remove Belkin F5D8235 v1 status led defined as storage led (it was defined as usb led earlier, just in wrong place) - it should have router led as in v2 * add Argus, Sparklan and Belkin F5D8235 v2 status leds * add Belkin F5D8235 v1 and v2 usb leds * fix Belkin F5D8235 v2 network config generation and mac address axtraction * fix Sparklan board identification * add Sparklan usb led (this board doesn't have usb connector by default and the led is hidden also but if you are going to solder the connector then you'll see the led too) * add Sparklan network config generation and mac address extraction * fix empty string test in network script and... * ...sort case entries by the first board in the list Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29871
* ramips fix f5d8235-v1 diag LED supportGabor Juhos2012-01-221-1/+1
| | | | SVN-Revision: 29857
* ramips: add sysled and sysupgrade to wr512-3gnGabor Juhos2012-01-222-1/+5
| | | | | | Patch from #10035. SVN-Revision: 29847
* ramips: sysupgrade for ESR-9753Gabor Juhos2012-01-201-0/+1
| | | | | | | | This patch add sysupgrade for Engenius ESR-9753 Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29824
* ramips: Rework ramips_eth to not require irqsave locking anymoreJohn Crispin2012-01-171-6/+9
| | | | | | | | | | | | | | | | | Previously the tx housekeeping was done in a spin_lock_irqsave critical section which causes irqs to be disabled during that time. Since the housekeeping is already prepared to be scheduled as a tasklet process the housekeeping only in softirq context and revise the locking between the tx path and the housekeeping tasklet by using a normal spin_lock which in most situations will be a NOP anyway. This makes sure that interrupts are only disabled for a short time since in the worst case the housekeeping might have to free up to 256 skbs. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> SVN-Revision: 29762
* ramips: rt288x: add support for the Belkin F5D8235-4 v1 boardGabor Juhos2011-12-2811-1/+184
| | | | | | Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 29617
* ramips: rt288x: change base address and window size of flash bank 0Gabor Juhos2011-12-281-2/+2
| | | | SVN-Revision: 29616
* ramips: rt305x: add support for the ALFA Networks W502U (R36) boardGabor Juhos2011-12-2813-3/+166
| | | | SVN-Revision: 29615
* ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N boardGabor Juhos2011-12-2711-1/+189
| | | | SVN-Revision: 29612
* ramips: initial support for Sitecom WL-351 v1 002Gabor Juhos2011-12-2313-5/+209
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This add support for the Sitecom WL-351 v1 002. In principle the Engenius ESR9850 should also work with this, but I don't have the hardware to test it. Since an external gigabit switch (RTL8366RB) is used, I had to modify the ramips_esw driver to add a 'bypass' mode, which just configures it to not filter the vlan tags. Also two initialization words (FCT2 and FPA2) are set to different values by u-boot than what the driver is using and it only seems to work correctly when they not overridden by the driver, so I added them to the platform specific data as reg_initval_fct2 and reg_initval_fpa2. With this wired lan works as expected, however I'm still having some trouble with the wireless lan: It only works after I rmmod & re-insmod rt2800pci and then reconfigure it in the webinterface, but not directly after rebooting. The symptom of this is wpad saying: Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1) Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN) Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated But wpa_supplicant on the client saying: Authentication with <wl351mac> timed out. Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de> SVN-Revision: 29604
* ramips: add support for the Senao/EnGenius ESR-9753 boardGabor Juhos2011-12-2314-1/+190
| | | | | | Signed-off-by: Artur Wronowski <arteqw@gmail.com> SVN-Revision: 29603
* ramips: define firmware partition for Omnima MiniEMBWiFiGabor Juhos2011-12-231-0/+4
| | | | | | Patch-by: Ivan Ignjatic <ivan@omnima.co.uk> SVN-Revision: 29602
* ramips: add support for Omnima MiniEMBWiFi boardGabor Juhos2011-12-1411-1/+140
| | | | | | | | | This patch adds support for the Omnima MiniEMBWiFi Ralink RT3050F based board. Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk> SVN-Revision: 29533
* ramips: fix mac addresses on the DIR-300/600 boardsGabor Juhos2011-12-062-0/+13
| | | | SVN-Revision: 29471
* ramips: set mac addresses for the NBG-419NGabor Juhos2011-12-052-1/+7
| | | | | | Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net> SVN-Revision: 29454
* ramips: set preinit interface mac on the hw550-3g boardGabor Juhos2011-12-051-0/+4
| | | | | | Based on a patch by Daniel Golle <dgolle@allnet.de> SVN-Revision: 29453
* ramips: use ramips_get_mac_* functions in the preinit scriptGabor Juhos2011-12-051-18/+4
| | | | SVN-Revision: 29452
* ramips: move ramips_get_mac_* functions to lib/ramips.shGabor Juhos2011-12-052-33/+37
| | | | SVN-Revision: 29451
* ramips: add ramips_ prefix to get_mac_{binary,nvram} functionsGabor Juhos2011-12-051-6/+6
| | | | SVN-Revision: 29450
* ramips: fix network configuration setupGabor Juhos2011-12-051-3/+3
| | | | SVN-Revision: 29448
* ramips: fix argus board rootfs sizeGabor Juhos2011-12-041-1/+1
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29422
* ramips: enable sysupgrade on the RT-N15 boardGabor Juhos2011-12-011-0/+1
| | | | SVN-Revision: 29393
* ramips: wrap long line in platform upgrade scriptGabor Juhos2011-12-011-1/+12
| | | | SVN-Revision: 29392
* ramips: add profile for the Asus RT-N15Gabor Juhos2011-12-011-0/+18
| | | | | | | | | | This uses previously submitted rtl8366 kernel packages. [juhosg: The kmod-gpio-dev package has been removed from the package list.] Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29391
* ramips: setup default network configuration for RT-N15Gabor Juhos2011-12-011-1/+9
| | | | | | Based on a patch by Roman Yeryomin <roman@advem.lv> SVN-Revision: 29390
* ramips: rt288x: add swconfig and rtl8366{s,_smi} drivers to the default profileGabor Juhos2011-12-011-1/+1
| | | | | | It is needed by the RT-N15 board. SVN-Revision: 29389
* ramips: remove default network configuration, and generate that from ↵Gabor Juhos2011-12-012-1/+13
| | | | | | uci-defaults SVN-Revision: 29387
* ramips: use /lib/functions/uci-defaults.shGabor Juhos2011-12-011-26/+12
| | | | SVN-Revision: 29386
* ramips: simplify uci-defaults/network scriptGabor Juhos2011-12-011-50/+13
| | | | SVN-Revision: 29383
* ramips: setup mac and network interfaces from separate functionsGabor Juhos2011-12-011-8/+30
| | | | SVN-Revision: 29382
* ramips: fix Asus RT-N15 board supportGabor Juhos2011-12-012-3/+14
| | | | | | | | Fix Asus RT-N15 flash partitions and make an image. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29381
* ramips: Sparklan wcr-150gn board fixesGabor Juhos2011-12-013-11/+54
| | | | | | | | | | | | * Fix partition sizes. * Add buttons and leds. * Register usb. * Remove unnecessary stuff from image Makefile * Fix rt2x00 eeprom extract. Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29380
* ramips: fix package name of kmod-input-gpio-buttonsGabor Juhos2011-12-011-1/+1
| | | | | | Based on a patch from Omnima Limited. SVN-Revision: 29379
* ramips: move kmod-rt2800-pci to DEFAULT_PACKAGESGabor Juhos2011-12-013-3/+3
| | | | | | Signed-off-by: Roman Yeryomin <roman@advem.lv> SVN-Revision: 29378
* ramips: setup bc2 mac addresses from the generic network scriptGabor Juhos2011-12-012-36/+1
| | | | SVN-Revision: 29377
* ramips: combine network setup for all boards in one fileGabor Juhos2011-12-012-39/+116
| | | | | | | | | | | | | Inspired by the patch from Roman Yeryomin. Thanks, Roman! This removes unnecessary duplication and simplifies network setup for new boards. It would be a one line change most likely. [juhosg: setup lan and wan interfaces for unspecified rt3x0x based boards in order to avoid regression] Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 29376
* rt305x: Create factory image for Fonera 2.0nVasilis Tsiligiannis2011-10-311-1/+8
| | | | SVN-Revision: 28689
* ramips: Support for NexAira BC2Gabor Juhos2011-10-2412-3/+171
| | | | | | | | | The preconfiguration of the USB LED has benn move to the /etc/uci-defaults/leds script. [juhosg] Signed-off-by: Adam Porter <porter.adam at gmail.com> SVN-Revision: 28571
* ramips: fix switch-port assignment for HW550-3GGabor Juhos2011-10-241-1/+1
| | | | | | | | WAN is on swtich port 0 for Aztech HW550-3G. Signed-off-by: Daniel Golle <dgolle@allnet.de> SVN-Revision: 28570
* ramips: combine led setup for all boards in one fileGabor Juhos2011-10-245-85/+34
| | | | | | | | | This removes unnecessary duplication and simplifies led setup for new boards. It would be a one line change most likely. Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su> SVN-Revision: 28569
* ramips: rt305x: add support for the ZyXEL NBG-419N boardGabor Juhos2011-08-2210-1/+132
| | | | SVN-Revision: 28078
* ramips: rt305x: remove unused defines from mach-nw718.cGabor Juhos2011-08-221-3/+0
| | | | SVN-Revision: 28077
* ramips: sort Makefile entriesGabor Juhos2011-08-221-1/+1
| | | | SVN-Revision: 28076
* ramips: sort RAMIPS_MACH_* definesGabor Juhos2011-08-221-4/+4
| | | | SVN-Revision: 28075
* ramips: fix wireless firmware extraction for wr512-3gnGabor Juhos2011-08-221-1/+1
| | | | | | Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx> SVN-Revision: 28073
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 07:40:47 +0000