aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips/image/rt305x.mk
Commit message (Collapse)AuthorAgeFilesLines
* treewide: make dependency on kmod-usb-net selectiveAdrian Schmutzler2020-08-101-1/+1
| | | | | | | | A bunch of kernel modules depends on kmod-usb-net, but does not select it. Make AddDepends/usb-net selective, so we can drop some redundant +kmod-usb-net definitions for DEVICE_PACKAGES. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: use lzma-loader for RT5350F-OLinuXino devicesSungbo Eo2020-08-081-0/+2
| | | | | | | The bootloader fails to extract a big kernel, e.g. v5.4 kernel image with ALL_KMODS enabled. This can be fixed by using lzma-loader. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: add support for ZyXEL Keenetic Lite Rev.BSergei Burakov2020-07-081-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | Device specification: SoC: RT5350 CPU Frequency: 360 MHz Flash Chip: Macronix MX25L6406E (8192 KiB) RAM: Winbond W9825G6JH-6 (32768 KiB) 5x 10/100 Mbps Ethernet (4x LAN, 1x WAN) 1x external antenna UART (J1) header on PCB (57800 8n1) Wireless: SoC-intergated: 2.4GHz 802.11bgn USB: None 8x LED, 2x button Flash instruction: Configure PC with static IP 192.168.99.8/24 and start TFTP server. Rename "openwrt-ramips-rt305x-zyxel_keenetic-lite-b-squashfs-sysupgrade.bin" to "rt305x_firmware.bin" and place it in TFTP server directory. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed until power LED start blinking. Router will download file from TFTP server, write it to flash and reboot. Signed-off-by: Sergei Burakov <senior.anonymous@ya.ru>
* ramips: add kmod-usb-dwc2 to ZyXEL Keenetic imageAlexey Dobrovolsky2020-06-031-1/+2
| | | | | | | | | | ZyXEL Keenetic has a USB port. Thus, DWC2 USB controller driver should be in the default image for this device. Fixes: a7cbf59e0e04 ("ramips: add new device ZyXEL Keenetic as kn") Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com> [fixed whitespace issue] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: tidy up image subtarget MakefilesSungbo Eo2020-05-081-29/+18
| | | | | | | | | - use tab indent in image build recipes for consistency - harmonize line wrapping Signed-off-by: Sungbo Eo <mans0n@gorani.run> [use different line wrapping for one recipe] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: remove (kmod-)swconfig DEVICE_PACKAGES for Sitecom WL-351Adrian Schmutzler2020-04-271-1/+1
| | | | | | | | These definitions are not required since swconfig is selected for the target anyway and kmod-swconfig is pulled as dependency by kmod-switch-rtl8366rb. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: remove unnecessary DEVICE_PACKAGES for Belkin F7C027Sungbo Eo2020-04-261-1/+0
| | | | | | | kmod-usb-dwc2 and kmod-usb-ledtrig-usbport are not target default packages, and Belkin F7C027 does not have a USB port anyway. Just drop it. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
* ramips: disable images for 4M devicesChuanhong Guo2020-04-121-0/+48
| | | | | | | | | default initramfs for 5.4 kernel is larger than 4M, causing build error for oversized initramfs image. disable these images because we have no mechanism for ignoring initramfs errors and the squashfs image will be larger than initramfs anyway. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ramips: use full 8MB flash on ZyXEL KeeneticAlexey Dobrovolsky2020-04-081-1/+1
| | | | | | | | | | | | | | | | ZyXEL Keenetic has 8MB flash, but OpenWrt uses only 4MB. This commit fixes the problem. WikiDevi page [1] says that ZyXEL Keenetic has FLA1: 8 MiB, there is an article with specs [2] (in Russian). [1] https://wikidevi.wi-cat.ru/ZyXEL_Keenetic [2] https://3dnews.ru/608774/page-2.html Fixes: FS#2487 Fixes: a7cbf59e0e04 ("ramips: add new device ZyXEL Keenetic as kn") Signed-off-by: Alexey Dobrovolsky <dobrovolskiy.alexey@gmail.com>
* ramips: Deactivate NETGEAR WNCE2001 by defaultHauke Mehrtens2020-03-291-0/+1
| | | | | | | | | The root file system is getting too big for this device and this breaks the ramips/rt305x build. Do not build images for this board by default to fix this problem. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: omit IMAGE_SIZE argument from check-sizeSungbo Eo2020-03-211-23/+23
| | | | | | | | | Now that check-size uses IMAGE_SIZE by default, we can skip the argument from image recipes to reduce redundancy. Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: make kmod-i2c-core selected by dependent modulesSungbo Eo2020-03-131-10/+10
| | | | | | | | | | | | | | | | | | Currently kmod-i2c-* will not get into images unless kmod-i2c-core is added to DEVICE_PACKAGES as well. By changing the dependencies from "depends on" to "select", we do not have the issue anymore. Furthermore, we can remove most occurrences of the package from DEVICE_PACKAGES and similar variables, as it is now pulled by dependent modules such as: - kmod-hwmon-lm75 - kmod-i2c-gpio - kmod-i2c-gpio-custom - kmod-i2c-mux - kmod-i2c-ralink Signed-off-by: Sungbo Eo <mans0n@gorani.run> [do not touch ar71xx] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: rename MTK_SOC to SOCAdrian Schmutzler2019-12-201-105/+105
| | | | | | | This replaces MTK_SOC by the newly introduced common SOC device variable. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: harmonize line breaks in image MakefilesAdrian Schmutzler2019-12-191-69/+62
| | | | | | | | | | | | | | | | This harmonizes the line wrapping in image Makefile device definitions, as those are frequently copy-pasted and are a common subject of review comments. Having the treatment unifying should reduce the cases where adjustment is necessary afterwards. Harmonization is achieved by consistently (read "strictly") applying certain rules: - Never put more than 80 characters into one line - Fill lines up (do not break after 40 chars because of ...) - Use one tab for indent after wrapping by "\" - Only break after pipe "|" for IMAGE variables Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: remove kmod-usb-core from DEVICE_PACKAGESAdrian Schmutzler2019-10-061-37/+37
| | | | | | | | | | | | | | | | | | | This removes _all_ occurrences of kmod-usb-core from DEVICE_PACKAGES and similar variables. This package is pulled as dependency by one of the following packages in any case: - kmod-usb-chipidea - kmod-usb-dwc2 - kmod-usb-ledtrig-usbport - kmod-usb-ohci - kmod-usb2 - kmod-usb2-pci - kmod-usb3 Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> [remove kmod-usb-core from EnGenius ESR600] Signed-off-by: David Bauer <mail@david-bauer.net>
* ramips: add device alias for Allnet ALL0239-3GDaniel Golle2019-08-221-0/+2
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: use kiB instead of B for IMAGE_SIZEAdrian Schmutzler2019-07-251-1/+1
| | | | | | | This cosmetical patch is just meant to make comparing/checking IMAGE_SIZE values easier. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: remove ralink_default_fw_size_xxx variablesAdrian Schmutzler2019-07-251-82/+82
| | | | | | | | | | | There are frequent examples of the ralink_default_fw_size_xxx variables being used to "roughly" set flash size without caring about the actual size of the firmware partition. To discourage this behavior, this patch removes the variables and just sets IMAGE_SIZE by its numeric value for each target. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: remove default IMAGE_SIZE for ramips targetAdrian Schmutzler2019-07-251-0/+34
| | | | | | | | | | | | | | | | | | | Currently, ramips target defines 0x7b0000 as default IMAGE_SIZE for all devices in ramips target, i.e. this will be set if a device does not specify IMAGE_SIZE itself. From 92 devices using that default due to a "missing" IMAGE_SIZE, 14 were incorrect by a small amount (i.e. still "8M" flash) and 12 were completely off ("16M", "4M", ...). This patch thus removes the _default_ IMAGE_SIZE and defines IMAGE_SIZE for each device individually. This should indicate to people supporting new devices that this parameter has to be cared about. For the present code, this patch is cosmetical. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/rt305x: fix IMAGE_SIZE for all devicesAdrian Schmutzler2019-07-251-3/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes IMAGE_SIZE for all devices based on the partition size given in DTS: DEVICE *.MK *.DTS VERDICT 7links_px-4885-4m (4M) 0x3b0000 7links_px-4885-8m - 0x7b0000 default 8devices_carambola - 0x7b0000 default accton_wr6202 - 0x7b0000 default airlive_air3gii (4M) 0x3b0000 alfa-network_w502u - 0x7b0000 default allnet_all0256n-4m (4M) 0x3b0000 allnet_all0256n-8m - 0x7b0000 default allnet_all5002 32448k 0x1fb0000 allnet_all5003 32448k 0x1fb0000 alphanetworks_asl26555-16m 15872k 0xf80000 alphanetworks_asl26555-8m 7744k 0x790000 arcwireless_freestation5 - 0x7b0000 default argus_atp-52b 7808k 0x7a0000 asiarf_awapn2403 (4M) 0x3b0000 asiarf_awm002-evb-4m (4M) 0x3b0000 asiarf_awm002-evb-8m - 0x7b0000 default asus_rt-g32-b1 (4M) 0x3b0000 asus_rt-n10-plus (4M) 0x3b0000 asus_rt-n13u - 0x7b0000 default asus_wl-330n (4M) 0x3b0000 asus_wl-330n3g (4M) 0x3b0000 aximcom_mr-102n - 0x790000 wrong aztech_hw550-3g - 0x7b0000 default belkin_f5d8235-v2 7744k 0x790000 belkin_f7c027 7616k 0x770000 buffalo_whr-g300n 3801088 0x3a0000 dlink_dap-1350 7488k 0x750000 dlink_dcs-930 (4M) 0x3b0000 dlink_dcs-930l-b1 (4M) 0x3b0000 dlink_dir-300-b1 (4M) 0x3b0000 dlink_dir-300-b7 (4M) 0x7b0000 wrong dlink_dir-320-b1 - 0x7b0000 default dlink_dir-600-b1 (4M) 0x3b0000 dlink_dir-610-a1 (4M) 0x3b0000 dlink_dir-615-d (4M) 0x3b0000 dlink_dir-615-h1 (4M) 0x3b0000 dlink_dir-620-a1 - 0x7b0000 default dlink_dir-620-d1 - 0x7b0000 default dlink_dwr-512-b 7800k 0x7e0000 wrong easyacc_wizard-8800 - 0x7b0000 default edimax_3g-6200n 3648k 0x390000 edimax_3g-6200nl 3648k 0x390000 engenius_esr-9753 (4M) 0x3b0000 fon_fonera-20n - 0x7b0000 default hame_mpr-a1 (4M) 0x3b0000 hame_mpr-a2 - 0x7b0000 default hauppauge_broadway 7744k 0x790000 hilink_hlk-rm04 - 0x3b0000 wrong hootoo_ht-tm02 - 0x7b0000 default huawei_d105 (4M) 0x3b0000 huawei_hg255d 15744k 0xf60000 intenso_memory2move - 0x7b0000 default jcg_jhr-n805r (4M) 0x3b0000 jcg_jhr-n825r (4M) 0x3b0000 jcg_jhr-n926r (4M) 0x3b0000 mofinetwork_mofi3500-3gn - 0x7b0000 default netcore_nw718 3712k 0x3a0000 netgear_wnce2001 (4M) 0x350000 wrong nexaira_bc2 - 0x7b0000 default nexx_wt1520-4m (4M) 0x3b0000 nexx_wt1520-8m - 0x7b0000 default nixcore_x1-16m 16064k 0xfb0000 nixcore_x1-8m 7872k 0x7b0000 olimex_rt5350f-olinuxino - 0x7b0000 default olimex_rt5350f-olinuxino-evb - 0x7b0000 default omnima_miniembplug - 0x7b0000 default omnima_miniembwifi - 0x7b0000 default petatel_psr-680w (4M) 0x3b0000 planex_mzk-dp150n (4M) 0x3b0000 planex_mzk-w300nh2 3648k 0x390000 planex_mzk-wdpr - 0x680000 wrong poray_ip2202 - 0x7b0000 default poray_m3 (4M) 0x3b0000 poray_m4-4m (4M) 0x3b0000 poray_m4-8m - 0x7b0000 default poray_x5 - 0x7b0000 default poray_x8 - 0x7b0000 default prolink_pwh2004 - 0x7b0000 default ralink_v22rw-2x2 (4M) 0x3b0000 sitecom_wl-351 (4M) 0x3b0000 skyline_sl-r7205 (4M) 0x3b0000 sparklan_wcr-150gn (4M) 0x3b0000 teltonika_rut5xx - 0xfb0000 wrong tenda_3g150b (4M) 0x3b0000 tenda_3g300m (4M) 0x3b0000 tenda_w150m (4M) 0x3b0000 tenda_w306r-v2 (4M) 0x3b0000 trendnet_tew-638apb-v2 (4M) 0x3b0000 trendnet_tew-714tru - 0x7b0000 default unbranded_a5-v11 (4M) 0x3b0000 unbranded_wr512-3gn-4m (4M) 0x3b0000 unbranded_wr512-3gn-8m - 0x7b0000 default unbranded_xdx-rn502j (4M) 0x3b0000 upvel_ur-326n4g (4M) 0x3b0000 upvel_ur-336un - 0x7b0000 default vocore_vocore-16m 16064k 0xfb0000 vocore_vocore-8m 7872k 0x7b0000 wansview_ncs601w - 0x7b0000 default wiznet_wizfi630a (16M) 0xfb0000 zorlik_zl5900v2 - 0x7b0000 default zyxel_keenetic (4M) 0x3b0000 zyxel_keenetic-start (4M) 0x3b0000 zyxel_nbg-419n (4M) 0x3b0000 zyxel_nbg-419n-v2 (8M) 0x7b0000 No verdict means that the device is correctly set. Legend: ( ): Value is set via ralink_default_fw_size_xxM [ ]: Value is derived from parent definition - : Value is not set and derived from default definition Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: fix ralink_default_fw_size_16MAdrian Schmutzler2019-07-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | In ramips, there are the following predefined values for IMAGE_SIZE ralink_default_fw_size_4M 3866624 3776k 0x3B0000 ralink_default_fw_size_8M 8060928 7872k 0x7B0000 ralink_default_fw_size_16M 16121856 15744k 0xF60000 ralink_default_fw_size_32M 33226752 32448k 0x1FB0000 Out of those, the "16M" value is obviously odd, as it provides more room for the remaining partitions than the tree others. Of the devices in all subtargets, there are actually > 50 that have a firmware partition with 0xFB0000 size, while only 5 (!) have 0xF60000. From the former, many are set to ralink_default_fw_size_16M anyway, although it is wrong at the present point. Consequently, it makes sense to change ralink_default_fw_size_16M to 0xFB0000, and to update IMAGE_SIZE for the 5 devices with 0xF60000. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: fix bogus MTK_SOC (typo)Daniel Golle2019-07-101-1/+1
| | | | | | | | | | Belkin F7C027 is clearly Rt5350 SoC, as shown on internal photographs filed for FCC approval[1]. [1]: https://fcc.io/K7S/F7C027 Fixes commit 3b0264eddbc Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: Sort all subtarget MakefilesAdrian Schmutzler2019-07-101-540/+538
| | | | | | | | | This patch applies sorting to the definitions as whole blocks. Sorting has been performed fully automatic, line count differences originate from double empty lines removed. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/rt305x: Name DTS files based on schemeAdrian Schmutzler2019-07-101-106/+106
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips/rt305x: Synchronize Makefiles with DTS compatibleAdrian Schmutzler2019-07-101-221/+322
| | | | Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: convert DEVICE_TITLE to new variablesDaniel Golle2019-07-061-105/+239
| | | | | | Also unify naming and add details where they were missing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: unify JCG helper command definitionDavide Fioravanti2019-05-311-5/+0
| | | | | | | This patch makes the JCG helper command definition available for every rampis target Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* ramips: add support for ZyXEL Keenetic StartVladimir Kot2019-03-291-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | Device specification: - SoC: RT5350F - CPU Frequency: 360 MHz - Flash Chip: Winbond 25Q32 (4096 KiB) - RAM: 32768 KiB - 5x 10/100 Mbps Ethernet (4x LAN, 1x WAN) - 1x external, non-detachable antenna - UART (J1) header on PCB (57800 8n1) - Wireless: SoC-intergated: 2.4GHz 802.11bgn - USB: None - 3x LED, 2x button Flash instruction: 1. Configure PC with static IP 192.168.1.2/24 and start TFTP server. 2. Rename "openwrt-ramips-rt305x-kn_st-squashfs-sysupgrade.bin" to "kstart_recovery.bin" and place it in TFTP server directory. 3. Connect PC with one of LAN ports, press the reset button, power up the router and keep button pressed until power LED start blinking. 4. Router will download file from TFTP server, write it to flash and reboot. Signed-off-by: Vladimir Kot <vova28rus@gmail.com> [fixed git commit author and whitespace issues in DTS] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ramips: consolidate seama image build codeMathias Kresin2018-12-301-11/+2
| | | | | | | | Create a common template which has the required image build code defined. Add some new variables to pass individual parts to the seama recipes. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use new image build code for D-Link DCS-930 familyMathias Kresin2018-12-121-0/+16
| | | | | | | | | | | | Drop the factory images and the firmware tool to create them. They don't work any more, since the factory image has an uImage header covering the whole kernel + rootfs. This way the uImage splitter will not be able to find the rootfs and the kernel will panic later on. The factory images were most likely added at a time the board had distinct partitions for kernel and rootfs. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix ethernet for f5d8235-v2 boardRoman Yeryomin2018-11-261-0/+1
| | | | | | | | | Belkin F5D8235 v2 has two ethernet switches on board. One internal rt3052 and rtl8366rb on rgmii interface. Looks like internal switch settings were lost in translation to device tree infrastructure. Signed-off-by: Roman Yeryomin <roman@advem.lv>
* treewide: use wpad-basic for not small flash targetsMathias Kresin2018-10-161-1/+1
| | | | | | | | | | | | Add out of the box support for 802.11r and 802.11w to all targets not suffering from small flash. Signed-off-by: Mathias Kresin <dev@kresin.me> Mathias did all the heavy lifting on this, but I'm the one who should get shouted at for committing. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ramips: add missing USB packages into ASL26555-16MZoltan HERPAI2018-08-131-1/+1
| | | | | | | Mirror the package list from the 8M device profile to the 16M device profile. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* ramips: add support for Zorlik ZL5900V2Vianney le Clément de Saint-Marcq2018-04-081-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | The Zorlik ZL5900V2 is an unbranded clone of HAME MPR-A1/2. It is marketed as "3G Wi-Fi Router". Only the PCB has the model name "ZL5900V2" printed on it. Specifications: - Ralink RT5350F (360 MHz) - 32 MB RAM - 8 MB Flash - 802.11bgn 1T1R - 1x 10/100 Mbps Ethernet - 1x USB 2.0 (Type-A) - 5200 mAh battery The ramdisk image (not the squashfs sysupgrade image) can be flashed through the web interface (named "GoAhead") of the factory firmware. However, as the factory firmware does not cleanly unmount the rootfs before flashing, the device may hang instead of rebooting after successful write. Power cycling the device gets you in OpenWrt where the squashfs image may be flashed through normal sysupgrade procedure. Signed-off-by: Vianney le Clément de Saint-Marcq <code@quartic.eu>
* ramips: add dwr-512 jboot firmware configurationGiuseppe Lippolis2018-04-081-3/+11
| | | | | | | | | | | | | | | | | | | | | The previous fw version require the replacement of the stock bootloader with u-boot. This prevent an easy stock restore of the original fw. Now a proper fw util has been developed to manage the stock jboot bootloader. Therefore make sense have a fw image for the stock bootloader. The old fw configuration (u-boot) is not compatible with the new one and will not be supported anymore. So at the end 2 image can be generated: 1) factory image with jboot bootloader openwrt-ramips-rt305x-dwr-512-b-squashfs-factory.bin 2) sysupgrade image with jboot bootloader openwrt-ramips-rt305x-dwr-512-b-squashfs-sysupgrade.bin Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ramips: use new image build code for WHR-G300NINAGAKI Hiroshi2018-02-131-0/+21
| | | | | | | | The tftp.bin image for Buffalo WHR-G300N was not built, so I was fixed it after rewriting to new image build code. And the code for factory-EU.bin was broken, so I deleted it. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* ramips: cleanup AsiaRF AWM002 eval board supportMathias Kresin2017-08-031-2/+2
| | | | | | | | | | | Cleanup the dtsi files and remove one layer of dtsi. Set the size of the firmware partition to a value matching the flash size from the board (variant) name. Remove the usb led trigger. There is neither a default config for the usb led trigger nor a LED for usb activity indication. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: drop AsiaRF AWM003 eval boardMathias Kresin2017-08-031-7/+1
| | | | | | | Everything is identical to the AWM002 8m eval board. No need to duplicate it once more. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix Omnima MiniEMBWiFi imageMathias Kresin2017-08-031-0/+1
| | | | | | | Reference the Omnima MiniEMBWiFi device tree source file in the image build code. Otherwise the dts of the image processed before is used. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: build HuaWei HG255D imageMathias Kresin2017-08-031-0/+7
| | | | | | | The code to build an image was disabled some time ago for unknown reasons albeit the image looks fine. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add support for TRENDnet TEW-638APB V2Pavlo Samko2017-06-171-0/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | This patch add support for the TRENDnet TEW-638APB V2. Specification: - SoC: Ralink SoC RT3052F - Flash: 4MB - RAM: 32MB - Ethernet: 1x LAN (100 Mbps) - Wireless: 2.4GHz b/g/n, 2x external antenna - Buttons: 1x Reset, 1x WPS - LEDs: Power (green), Ethernet (green), WPS (green and orange), Wireless (green) - UART: 1x UART on PCB (3.3V, GND, RX, TX) - 57600 8N1 Installation via vendor firmware: - upload sysupgrade.bin image via TFTP: - stop uboot into tftp-load into option "2" - upload sysupgrade.bin image Signed-off-by: Pavlo Samko <bulldozerbsg@gmail.com>
* DWR-512: adding wwan support for the dwr-512 3G modemGiuseppe Lippolis2017-05-251-2/+2
| | | | | | | | | This PR allow the 3G modem embedded in the DWR-512 to be managed by the wwan-ncm scripts. The modem will use the usb-option and usb-cdc-ether drivers. The DWR-512 DT is updated accordingly. Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ramips: add om-watchdog to rut5xx DEVICE_PACKAGESSteffen Weinreich2017-05-151-0/+1
| | | | | | Add om-watchdog as default package for rut5xx. Signed-off-by: Steffen Weinreich <steve@weinreich.org>
* ramips: add new device ZyXEL Keenetic as knAlexey Belyaev2017-05-101-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This device exactly same as NBG-419N but with USB port and USB Led. Specification: - SoC: Ralink RT3052 (MIPS24Kc) @384MHz - RAM: 32 MiB - Flash: 8 MiB - WLAN: WiSoC 2T2R/300Mbps (2.4GHz) - LAN: 4x100M - WAN: 1x100M - USB: 1x2.0 Installation via serial console (57600 8N1) from TFTP server - rename the firmware to something shorter, for example "sysupgrade.bin" (max. 32 chars) - copy firmware TFTP server's directory - when you power on device, and see U-Boot log, immediatly push "2" once. - You will see this message: 2: System Load Linux Kernel then write to Flash via TFTP. Warning!! Erase Linux in Flash then burn new one. Are you sure? - Push "y", and enter: device IP, then TFTP server's IP, and then image firmware file name. The firmware will be downloaded within ~30 seconds and flashed to the device (It will take about 2 minutes). Signed-off-by: Alexey Belyaev <spider@spider.vc> [squash commits, compact commit message, fix compatible string, remove superfluous pinmuxes] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add former used board names to metadataMathias Kresin2017-04-211-0/+6
| | | | | | | | | We need to keep the former used (unmodified) boardname in the metadata. Otherwise an upgrade from an board using the old boardname will be refused. Fixes: a75ce960ac1b ("ramips: use different board names for variants") Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: added image size into dwr-512 DTGiuseppe Lippolis2017-02-131-0/+1
| | | | Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
* ramips: fix NixcoreX1 profilesRafał Miłecki2016-12-281-2/+2
| | | | | | | There was a typo in Makefile that prevented using these profiles. Fixes: a75ce960ac1 ("ramips: use different board names for variants") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* ramips: use new image build code for more devicesMathias Kresin2016-12-241-0/+372
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: use different board names for variantsMathias Kresin2016-12-241-12/+6
| | | | | | | | | | | | Use different names for flash size related board variants, to make sure that only images for the actual flash size are considered as valid by the image validation code. Remove the flash size suffix from the string returned by ramips_board_detect() to ensure that existing scripts relying on the former used boardname are still working. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: sort rt305x image file alphabeticalMathias Kresin2016-12-241-218/+155
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-29 16:41:46 +0000