aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/oxnas
Commit message (Collapse)AuthorAgeFilesLines
* kernel: update kernel 4.4 to version 4.4.19Stijn Tintel2016-08-231-2/+2
| | | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon and x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* oxnas: drop explicit pre-init ifaceDaniel Golle2016-08-221-2/+0
| | | | | | | | | According to Jonas Gorski this is no longer needed, the problem originally addressed by first adding 07_preinit_iface and subsequently merging that into 02_network was probably a bug during the transition to the new board.d pre-init approach. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: set preinit interface in /etc/board.d/02_networkDaniel Golle2016-08-192-7/+2
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: set preinit network interfaceDaniel Golle2016-08-111-0/+7
| | | | | | set network interface for failsafe mode to eth0 for all boards Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: rename sysupgrade-nand to sysupgrade-tarJo-Philipp Wich2016-07-291-1/+1
| | | | | | | Now that the "sysupgrade-nand" step is used by non-NAND targets as well, rename it to "sysupgrade-tar" to make it more generic. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* oxnas: add kmod-ledtrig-timer to default package setDaniel Golle2016-07-181-3/+3
| | | | | | It is needed for preinit/failsafe indications to work. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: use DHCP by default on ethernet interface (lan)Daniel Golle2016-07-181-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: sync kernel config-4.1 with changes made to config-4.4Daniel Golle2016-07-181-7/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: add DTB for Akitio devices in patches-4.1Daniel Golle2016-07-181-2/+3
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: revert to kernel 4.1Daniel Golle2016-07-1821-2/+899
| | | | | | | | | A bug resulting in the NAND not being detected by newer kernels has kept me sleepless for months and yet I wasn't able to discover the cause. Bring back patches and files for 4.1 until this has been resolved. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* image: clean up UBI related device variable definitionsFelix Fietkau2016-07-141-2/+1
| | | | | | | Move UBI related variable export to core, since the variables are used by a core Build/ template Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: update to version 4.4.14Hauke Mehrtens2016-06-261-2/+2
| | | | | | | | | Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14 Some manual changes to target/linux/generic/patches-4.4/610- netfilter_match_bypass_default_checks.patch were needed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* oxnas: install kernel binaries into bin/ for use with external storageFelix Fietkau2016-06-071-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* oxnas: remove unneeded _DIAG symbolsDirk Neukirchen2016-06-061-5/+0
| | | | Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
* kernel: update kernel 4.4 to version 4.4.12Álvaro Fernández Rojas2016-06-021-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* oxnas: use global UBIFS_OPTS, all profiles use the same settingsFelix Fietkau2016-05-221-5/+1
| | | | | | Fixes build when selecting a device profile Signed-off-by: Felix Fietkau <nbd@nbd.name>
* oxnas: drop compatibility with old kernels from mach-ox820Daniel Golle2016-05-201-5/+0
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: drop compatibility with old kernels from pinctrlDaniel Golle2016-05-201-8/+0
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: drop compatibility with old kernels from irq-rpsDaniel Golle2016-05-201-23/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: drop compatibility with old kernels from dwmac-oxnasDaniel Golle2016-05-201-27/+0
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: sync 010-arm_introduce-dma-fiq-irq-broadcast with cns3xxxDaniel Golle2016-05-201-15/+27
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: move target-specific modules into target's modules.mkDaniel Golle2016-05-171-0/+41
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: reorganize image build code and nuke profilesDaniel Golle2016-05-167-119/+36
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* oxnas: delete linux 4.1 supportFelix Fietkau2016-05-1215-831/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* oxnas: add missing semicolonLuka Perkov2016-04-241-1/+1
| | | | | | | | | A missing semicolon in the gpio-keys-polled section of ox820-akitio.dts caused the build to break. Add it. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49219
* oxnas: clean-up and improve profilesHauke Mehrtens2016-04-192-7/+10
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49198
* oxnas: add support for Akitio MyCloud miniHauke Mehrtens2016-04-197-3/+166
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49197
* oxnas: set ubifs parameters for Default profileJohn Crispin2016-03-231-0/+1
| | | | | | | | | | | | | | | | | | Work-around obsolete mkfs/ubifs code. Unlike squashfs, ubifs images should be generated per-device so minimum I/O unit size, logical erase block size, maximum logical erase block count can be defined for the specific flash-chips parameters. Also, generating ubinized images is unrelated to rootfs being ubifs or squashfs, but rather depends on the device supporting UBI or not. In the meantime and in order to fix an error which currently causes the image generation on buildbot to fail, work-around by defining UBIFS_OPTS for the Default profile. See also http://buildbot.openwrt.org:8010/builders/oxnas/builds/246/steps/compile_8/logs/stdio Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49068
* oxnas: sync cpu-hotplug with mach-realviewJohn Crispin2016-03-201-4/+3
| | | | | | | | | Make mach-oxnas/hotplug.c look more similar to mach-realview/hotplug.c, just cosmetics and maintainability concerns, no functional changes. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49044
* oxnas: add spinlock in pinctrl driverJohn Crispin2016-03-201-2/+16
| | | | | | | | Try to address a race-condition in pinctrl-oxnas.c Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49043
* oxnas: also reset GPIO B registers on bootJohn Crispin2016-03-201-6/+6
| | | | | | | | | | Clear both, SYS_CTRL_*_SEL and SEC_CTRL_*_SEL on boot instead of writing to SYS_CTRL_*_SEL twice which looks like a copy-paste error. Thanks to anonymous to bring this up in #21892! Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49042
* oxnas: switch to new image generation templateJohn Crispin2016-03-201-86/+44
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49041
* oxnas: add Default profile and reorganize device profilesJohn Crispin2016-03-204-23/+52
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49040
* kernel: update kernel 4.1 to version 4.1.20Hauke Mehrtens2016-03-181-1/+1
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 49035
* oxnas: complete NAND driver clean-upJohn Crispin2016-03-101-4/+0
| | | | | | | | some bit rot was accidentally left-out in r48986, remove it. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48997
* oxnas: clean-up NAND driver to fix probing issueJohn Crispin2016-03-101-13/+5
| | | | | | | | | | | A re-write of the driver based on xway_nand.c and constants as well as the cmd_ctrl() function from the original oxnas_nand.c resulted in a extremely similar looking file (see diffsize), and fixes the issue of NAND not being detected on newer kernels. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48986
* kernel: update kernel 4.4 to version 4.4.3Hauke Mehrtens2016-02-251-1/+1
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 48783
* base-files: remove default /etc/config/network, generate it via board.d insteadFelix Fietkau2016-01-251-3/+0
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48493
* oxnas: finally make board names consistentFelix Fietkau2016-01-203-4/+4
| | | | | | | | | | | | | | r48337 unfortunately incorrectly changed the boardname of the stg212 into stg-212 which is not the name of the image of DTS file or boardname using sysupgrade, which is 'stg212' and imho should stay that way. The changes r48337 made for pogoplug-pro and pogoplug-v3 were correct, thus this commit only partially reverts r48337. Also properly set default for USB LED while already at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48398
* oxnas: switch to Linux 4.4Felix Fietkau2016-01-181-1/+1
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48340
* oxnas: add patches and config for Linux 4.4Felix Fietkau2016-01-1815-0/+838
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48339
* oxnas: prepare platform and drivers for Linux 4.4Felix Fietkau2016-01-182-0/+9
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48338
* oxnas: fix the incorrect board namesFelix Fietkau2016-01-183-6/+6
| | | | | | | Signed-off-by: Shonn Lu <countrysideboy@qq.com> Acked-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48337
* all: drop old uci-defaults.shJo-Philipp Wich2015-12-112-2/+2
| | | | | | | | | Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867
* oxnas: set irq of usb&sata to cpu1John Crispin2015-11-241-0/+22
| | | | | | | | | V2: The KD-20 also has USB 3.0.I modiy the set_irq_affinity usb 2 to set_irq_affinity ?hci_hcd 2 to bind usb 2.0&3.0 to cpu1. Signed-off-by: Shonn Lu <countrysideboy@qq.com> SVN-Revision: 47618
* oxnas: add missing platform bindings for stmmac glueJohn Crispin2015-11-211-0/+19
| | | | | | | | | | | r47218 was missing needed changes which were accidentally ommitted from the patch. This should fix #20878 Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47552
* oxnas: image: Remove custom mkfs targz override as base should be fine nowFelix Fietkau2015-10-311-5/+0
| | | | | | | | | It was wrong anyway, missing file sort order parameter which was fixed in base month ago. Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47314
* oxnas: image: Refactor sanitize_profile_name using PROFILE_SANITIZED variableFelix Fietkau2015-10-311-12/+8
| | | | | | Signed-off-by: Petr Štetiar <ynezz@true.cz> SVN-Revision: 47310
* kernel: update kernel 4.1 to version 4.1.11Hauke Mehrtens2015-10-251-1/+1
| | | | | | | | https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.11 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47252
* oxnas: move gmac soc glue from mach to stmmac driverJohn Crispin2015-10-193-101/+197
| | | | | | | | | Still a lot of kernel-version ifdef'ery, but imho that's easy to remove once obsoleted and avoids duplicate code in the meantime. Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 47218
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 19:20:02 +0000