aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mediatek
Commit message (Collapse)AuthorAgeFilesLines
...
* mediatek: mt7623: yet another legacy image variable restoredDaniel Golle2021-07-211-0/+6
| | | | | | | Restore BOOTFS_BLOCKS variable until U7623 gets brushed, so things hopefully build now. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: allow build without ext4 rootfsDaniel Golle2021-07-211-1/+1
| | | | | | | | | | The image generation code for the U7623 board expects ext4 filesystem to be selected in menuconfig and CONFIG_TARGET_ROOTFS_PARTSIZE to be defined. Now that ext4 isn't enabled any more, the variable was missing and broke the build. Set the default (104) instead of using the config variable to fix that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: add back needed build steps for U7623 boardDaniel Golle2021-07-211-0/+21
| | | | | | | | When reworking the BPi-R2 the mtk-mmc-img build step was removed despite it was still needed to build the image for the UniElec U7623 board. Add it back for now until U7623 gets its facelift. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: remove ext4 images from mt7623 buildDaniel Golle2021-07-201-1/+1
| | | | | | | | A full read-write rootfs cannot work inside uImage.FIT as the hash will obviously change once writing to it. Disable generating ext4 rootfs images. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: fix typo in kernel mt7623/config-5.10Daniel Golle2021-07-201-1/+1
| | | | | | Fix typo reported by github user @mans0n. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: drop kmod-mmcDaniel Golle2021-07-201-1/+1
| | | | | | | Support for MMC is built-into the kernel anyway, no need to select the (empty/stub) kmod package. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: rework Bananapi BPi-R2Daniel Golle2021-07-208-147/+153
| | | | | | | | | | | | | * introduce recovery (=initramfs) vs. production dual boot scheme * make use of uImage.FIT (instead of FAT partition) * generate images using build steps (instead of external scripts) * simplify sysupgrade and config restore (thanks to uImage.FIT) * make sure mmc devices are ordered persistently (set DT aliases) This commit breaks sysupgrade from existing installations, you will have to re-install using the sdcard.img.gz image. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: import patch to fix flow offloadingDaniel Golle2021-07-201-0/+24
| | | | | | | Hardware flow offloading was reported to work when setting the right version identifier. Import a patch from Frank Wunderlich doing that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: build with Linux 5.10Daniel Golle2021-07-202-90/+76
| | | | | | | | Update Kernel config and set Linux 5.10 for mediatek/mt7623. (patches have already been updated to 5.10 when mt7622 was bumped) Tested on Bananapi BPi-R2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: convert mtd-mac-address to nvmem implementationAnsuel Smith2021-07-195-12/+89
| | | | | | | Define nvmem-cells and convert mtd-mac-address to nvmem implementation. The conversion is done with an automated script. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: bump 5.10 to 5.10.50Rui Salvaterra2021-07-172-2/+2
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.132John Audia2021-07-172-2/+2
| | | | | | | | | | | | | | | Manually rebased: layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.126John Audia2021-06-261-1/+1
| | | | | | | | | Manually rebased: bcm27xx/patches-5.4/950-0089-cgroup-Disable-cgroup-memory-by-default.patch All other patches automatically rebased. Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.46Rui Salvaterra2021-06-261-1/+1
| | | | | | | | Add the new symbol to the generic kconfig. No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.124John Audia2021-06-065-35/+35
| | | | | | | | | | | | | | | | | Manually rebased: generic/hack-5.4/662-remove_pfifo_fast.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [manual changes to ramips/patches-5.10/835-asoc-add-mt7620-support.patch] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump 5.10 to 5.10.42Rui Salvaterra2021-06-062-4/+4
| | | | | | | | | | Deleted (reverse-appliable): generic/pending-5.10/110-perf-jevents-fix-getting-maximum-number-of-fds.patch Manually refreshed: ramips/patches-5.10/835-asoc-add-mt7620-support.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: update mtd parser patchesHauke Mehrtens2021-05-236-85/+94
| | | | | | | This updates the patches to match the versions included in the mtd subsystem for the next Linux kernel version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: reserve memory for ramoops and enable PSTOREDaniel Golle2021-05-086-13/+65
| | | | | | | Reserve 64KiB of memory for crashlogs and enable PSTORE feature in kernel config for MT7622. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: bpi-r64: add eMMC bootloader artifactsDaniel Golle2021-05-011-1/+3
| | | | | | | | In order to allow easily updating the bootloader on eMMC also provide artifacts for that. Support for updating bootloader via TFTP will be added to the loader CLI menu in a follow-up commit. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: Add missing config optionsHauke Mehrtens2021-05-012-0/+2
| | | | | | | | It is possible to select CONFIG_MTD_PARSER_TRX on the mediatek now. Add this option to the kernel configuration file. Fixes: 58c5e2566482 ("mediatek: support non standard trx magic values") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: correct address of ethernet PHYDavid Bauer2021-05-011-2/+2
| | | | | | | We still have no driver for the PHY, however we can fix it's address. Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: backport mtk_soc_eth fixes from v5.13Ilya Lipnitskiy2021-04-301-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes logic that leads to this error when booting mt7621 and other devices that use the mediatek ethernet driver: [ 23.144378] mtk_soc_eth 1e100000.ethernet: PPE table busy The rest are mostly moved from pending-5.10 to backport-5.10 with a couple of cleanups and improvements from upstream. Refresh patches. Links: https://git.kernel.org/netdev/net-next/c/c5d66587b890 https://git.kernel.org/netdev/net-next/c/3f57d8c40fea https://git.kernel.org/netdev/net-next/c/5196c4178549 https://git.kernel.org/netdev/net-next/c/787082ab9f7b https://git.kernel.org/netdev/net-next/c/c30c4a827390 https://git.kernel.org/netdev/net-next/c/3630d519d7c3 https://git.kernel.org/netdev/net-next/c/16ef670789b2 https://git.kernel.org/netdev/net-next/c/59555a8d0dd3 https://git.kernel.org/netdev/net-next/c/6b4423b258b9 https://git.kernel.org/netdev/net-next/c/e9229ffd550b https://git.kernel.org/netdev/net-next/c/4e6bf609569c https://git.kernel.org/netdev/net-next/c/816ac3e6e67b https://git.kernel.org/netdev/net-next/c/16769a8923fa https://git.kernel.org/netdev/net-next/c/db2c7b353db3 https://git.kernel.org/netdev/net-next/c/fa817272c37e https://git.kernel.org/netdev/net-next/c/3bc8e0aff23b Fixes: f07fe36f22fc ("kernel: update flow offload patches to upstream version") Cc: Felix Fietkau <nbd@nbd.name> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* mediatek: bpi-r64: fix sdcard.img.gz in ImageBuilderDaniel Golle2021-04-231-1/+1
| | | | | | | | Generating the sdcard.img.gz file requires the initramfs/recovery image to be present. Use the newly introduced 'append-image-stage' build command to fix the ImageBuilder for the BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: build AHCI driver as moduleDaniel Golle2021-04-231-1/+0
| | | | | | | | | Build the driver for the in-SoC AHCI SATA host as module, just like for the other subtargets. No board requires booting off SATA, so we don't need to have it built-in. All boards with SATA support already select kmod-ata-ahci-mtk which provides the module. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.32Rui Salvaterra2021-04-221-36/+0
| | | | | | | | | | | | | | | | | | | | Deleted (reverse-appliable): mediatek/patches-5.10/360-mtd-rawnand-mtk-Fix-WAITRDY-break-condition-and-time.patch Automatically refreshed: ath79/patches-5.10/0036-GPIO-add-named-gpio-exports.patch generic/backport-5.10/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch generic/backport-5.10/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch generic/backport-5.10/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch generic/backport-5.10/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch generic/pending-5.10/600-netfilter_conntrack_flush.patch generic/pending-5.10/613-netfilter_optional_tcp_window_check.patch generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch generic/pending-5.10/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch lantiq/patches-5.10/0030-GPIO-add-named-gpio-exports.patch ramips/patches-5.10/800-GPIO-add-named-gpio-exports.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* treewide: switch the timer frequency to 100 HzRui Salvaterra2021-04-212-4/+0
| | | | | | | | Some targets select HZ=100, others HZ=250. There's no reason to select a higher timer frequency (and 100 Hz are available in every architecture), so change all targets to 100 Hz. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* treewide: remove redundant ubifs kconfig symbolsRui Salvaterra2021-04-213-11/+0
| | | | | | | For the targets which enable ubifs, these symbols are already part of the generic kconfigs. Drop them from the target kconfigs. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.112John Audia2021-04-172-5/+5
| | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Removed upstreamed: mvebu/patches-5.4/319-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch Build system : x86_64 Build-tested : ipq806x/R7800 Run-tested : ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* mediatek: fix Ubiquiti UniFi 6 LR LEDDavid Bauer2021-04-162-0/+215
| | | | | | | | | | When adding Kernel 5.10 support, the kernel configuration did not include the LED driver required for the UniFi 6 LR. Also the actual driver source went missing. Fixes commit c46ccb69d17e ("mediatek: mt7622: add Linux 5.10 support") Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: bump 5.10 to 5.10.30Rui Salvaterra2021-04-163-4/+4
| | | | | | | | | | | | | | | | | | | | | Deleted (reverse-applicable): mvebu/patches-5.10/101-ARM-dts-turris-omnia-configure-LED-2--INTn-pin-as-interrupt-pin.patch Automatically refreshed: bcm63xx/patches-5.10/143-gpio-fix-device-tree-gpio-hogs-on-dual-role-gpio-pin.patch generic/backport-5.10/610-v5.13-02-netfilter-Fix-fall-through-warnings-for-Clang.patch generic/backport-5.10/610-v5.13-10-netfilter-nftables-update-table-flags-from-the-commi.patch generic/hack-5.10/204-module_strip.patch generic/hack-5.10/902-debloat_proc.patch generic/pending-5.10/203-kallsyms_uncompressed.patch generic/pending-5.10/670-ipv6-allow-rejecting-with-source-address-failed-policy.patch generic/pending-5.10/920-mangle_bootargs.patch mediatek/patches-5.10/115-dts-bpi64-add-snand-support.patch mediatek/patches-5.10/602-arm64-dts-mediatek-Split-PCIe-node-for-MT2712-MT7622.patch mediatek/patches-5.10/900-dts-mt7622-bpi-r64-aliases-for-dtoverlay.patch ramips/patches-5.10/323-mt7621-memory-detect.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: mt7622: add spi-nand support for bananapi bpi-r64Oskari Lemmela2021-04-114-12/+142
| | | | | | | | | | Some of bpi-r64 boards have serial NAND attached to SPI bus. Add SD card image support for installing openwrt to it. Default to nand upgrade if root device is not mmc block device. Separate preloader and uboot images for snand are generated. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mediatek: bpi-r64: use separate partition for emmc bootloaderOskari Lemmela2021-04-111-6/+7
| | | | | | | eMMC booloader is stored to separate partition. FIP size is increased to 2MB. Signed-off-by: Oskari Lemmela <oskari@lemmela.net>
* mediatek: remove duplicate dts-v1 statement for UniFi 6 LRAdrian Schmutzler2021-04-102-2/+0
| | | | | | | | | /dts-v1/; must only be specified once. Fixes: e887049fbb74 ("mediatek: add alternative bootchain variant for UniFi 6 LR") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: add alternative bootchain variant for UniFi 6 LRDaniel Golle2021-04-095-289/+386
| | | | | | | | Builds images for the Ubiquiti Network UniFi 6 LR device running the U-Boot build added by the previous commits. Everything but MTD partitions is moved to dtsi. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.4 to 5.4.109John Audia2021-04-021-2/+2
| | | | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Manually rebased: pending-5.4/611-netfilter_match_bypass_default_table.patch The upstream change affecting this patch is the revert of an earlier kernel commit. Therefore, we just revert our corresponding changes in [1]. Build system: x86_64 Build-tested: ipq806x/R7800 [1] 9b1b89229f0e ("kernel: bump 5.4 to 5.4.86") Signed-off-by: John Audia <graysky@archlinux.us> [adjust manually rebased patch, add explanation] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: mt7622: improve sysupgrade on MMCDaniel Golle2021-03-311-49/+12
| | | | | | | Use generic functions to acquire rootdev. Make sure to wipe rootfs_data in case of '-n'. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport 5.13 mtd partitioning changesRafał Miłecki2021-03-292-2/+2
| | | | | | | | 1. Use upstream accepted NVMEM patches 2. Minor fix for BCM4908 partitioning 3. Support for Linksys firmware partitions on Northstar Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 5.4 to 5.4.108John Audia2021-03-271-2/+2
| | | | | | | | | | | | | | | | | All modifications made by by update_kernel.sh. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 [only 5.4.107] No dmesg regressions, everything functional Run-tested by @timocapa: - ramips/mt7621/{Xiaomi R3G, Redmi 2100} - Lantiq/XWAY/Fritz!Box 7320/7330 Signed-off-by: John Audia <graysky@archlinux.us> [squash, edit commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: generate complete sdcard image for BPi-R64Daniel Golle2021-03-241-4/+9
| | | | | | | Populate the recovery and production partitions of the generated sdcard image for the Bananapi BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.4 to 5.4.106John Audia2021-03-214-38/+38
| | | | | | | | | | | | | | | | | | Ran update_kernel.sh in a fresh clone without any existing toolchains. Manually rebased: bcm27xx/950-0993-xhci-quirks-add-link-TRB-quirk-for-VL805.patch layerscape/701-net-0231-enetc-Use-DT-protocol-information-to-set-up-the-port.patch Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us> [remove accidental whitespace edit] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mediatek: linksys-e8450: remove left-overs from dtsiDaniel Golle2021-03-211-9/+0
| | | | | | | | | | | There is an ASMedia ASM1480 PCIe switch found on mt7622-rfb1 and the BPi-R64, allowing the user to switch between SATA and PCIe1 which share the same pins on the SoC. This chip is not present on the Linksys E8450, it doesn't have SATA. Remove definitions for GPIO90 from DTSI to prevent it from being copy&pasted or otherwise causing confusion. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: move some disabled symbols to genericAleksander Jan Bajkowski2021-03-193-5/+0
| | | | | | Move some disabled symbols found in armvirt target to generic. Signed-off-by: Aleksander Jan Bajkowski <A.Bajkowski@stud.elka.pw.edu.pl>
* mediatek: fix broken UniFi 6 LR imageDavid Bauer2021-03-181-0/+1
| | | | | | | | Ubiquiti's own bootloader expects the configuration mode to be present with a "@" instead of a "-" for the sperator character. Otherwise booting of the image fails. Signed-off-by: David Bauer <mail@david-bauer.net>
* mediatek: Fix writing U-Boot env on Buffalo WSR-2533DHP2Hauke Mehrtens2021-03-171-1/+0
| | | | | | | This fixes writing to the U-Boot environment by making the partition writable and setting the correct flash sector size of 128K. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: bpi-r64: use dt-overlay to select SATA or PCIE1Daniel Golle2021-03-173-1/+82
| | | | | | | | | | The Bananapi BPi-R64 got a SATA interface which cannot be used at the same time as the second mPCIe slot. The decission is made by hogging GPIO 90. Embed two addtional DT overlay blobs into the image to allow bootloader selection of either SATA or PCIE1 feature. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: drop duplicate DEVICE_PACKAGESDaniel Golle2021-03-151-1/+1
| | | | | | | | kmod-mt7615e kmod-mt7615-firmware and uboot-envtools are already part of the target's default package set. No need to add them again for buffalo_wsr-2533dhp2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Buffalo WSR-2533DHP2INAGAKI Hiroshi2021-03-157-0/+560
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Buffalo WSR-2533DHP2. The device uses the Broadcom TRX image format with a special magic. To be able to boot the images or load them they have to be wrapped with different headers depending how it is loaded. There are multiple ways to install OpenWrt on this device. Boot ramdisk from U-Boot ---------------------------- This will load the image and not write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux to SDRAM via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin 4. The system boots the image Write to flash from U-Boot ----------------------------- This will load the image over tftp and directly write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux Kernel then write to Flash via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin 4. The system writes this image into the flash and boots into it. Write to flash from Web UI ----------------------------- This will load the image over over the Web UI and write it into the flash 1. Open the Web UI 2. Go to "管理" -> "ファームウェア更新" 3. Select "ローカルファイル指定" and click "更新実行" 4. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin 5. The system writes this image into the flash and boots into it. Specifications ------------------- * SoC: MT7622 (4x4 2.4 GHz Wifi) * Wifi: MT7615 (4x4 5 GHz Wifi) * Flash: Winbond W29N01HZ 128MB SLC NAND * RAM 256MB * Ethernet: Realtek RTL8367S (5 x 1GBit/s, SoC via 2.5GBit/s) Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: support non standard trx magic valuesHauke Mehrtens2021-03-154-0/+196
| | | | | | | | | | | Buffalo uses the TRX format with a different magic, add support for this. It is planned to send these patches upstream. Cc: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: fix mtk parallel nand driverHauke Mehrtens2021-03-151-0/+36
| | | | | | | | This fixes some bugs in the mtk parallel nand driver introduced in 5.10. This patch was send upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: mt7622: clean up image buildDaniel Golle2021-03-141-22/+13
| | | | | | | | | | | | | * clean up whitespace to make GPT partitioning more readable * don't select packages already part of the target default selection * don't select U-Boot variants (breaks ImageBuilder) * don't select AHCI on boards without SATA * don't select kmod-usb2 and kmod-ohci, USB 1.x and USB 2.0 devices work fine with the in-SoC XHCI host having just kmod-usb3 installed. * select kmod-btmtkuart for devices with Bluetooth support * sort DEVICE_PACKAGES Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-07 15:02:53 +0000