aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mediatek/patches-5.10
Commit message (Collapse)AuthorAgeFilesLines
* generic: move ledbar driver from mediatek targetSven Wegener2022-09-181-29/+0
| | | | | | | This moves the ledbar driver to generic, to be also used by the ramips target. Signed-off-by: Sven Wegener <sven.wegener@stealer.net> (cherry picked from commit 53fc987b25524c28525313347f0e2e5653dce43c)
* kernel: Refresh on 5.10.138Hauke Mehrtens2022-08-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refresh all patches on top of kernel 5.10.138. The following patches were applied upstream: bcm27xx/patches-5.10/950-0311-drm-vc4-Adopt-the-dma-configuration-from-the-HVS-or-.patch bcm27xx/patches-5.10/950-0317-vc4_hdmi-Remove-firmware-logic-for-MAI-threshold-set.patch bcm27xx/patches-5.10/950-0346-drm-vc4-A-present-but-empty-dmas-disables-audio.patch bcm27xx/patches-5.10/950-0354-drm-vc4-Add-the-2711-HVS-as-a-suitable-DMA-node.patch bcm27xx/patches-5.10/950-0413-drm-vc4-hdmi-Don-t-access-the-connector-state-in-res.patch bcm27xx/patches-5.10/950-0505-vc4-drm-Avoid-full-hdmi-audio-fifo-writes.patch bcm27xx/patches-5.10/950-0512-vc4-drm-vc4_plane-Remove-subpixel-positioning-check.patch bcm27xx/patches-5.10/950-0560-drm-vc4-drv-Remove-the-DSI-pointer-in-vc4_drv.patch bcm27xx/patches-5.10/950-0561-drm-vc4-dsi-Use-snprintf-for-the-PHY-clocks-instead-.patch bcm27xx/patches-5.10/950-0562-drm-vc4-dsi-Introduce-a-variant-structure.patch bcm27xx/patches-5.10/950-0565-drm-vc4-Correct-pixel-order-for-DSI0.patch bcm27xx/patches-5.10/950-0566-drm-vc4-Register-dsi0-as-the-correct-vc4-encoder-typ.patch bcm27xx/patches-5.10/950-0567-drm-vc4-Fix-dsi0-interrupt-support.patch bcm27xx/patches-5.10/950-0568-drm-vc4-Add-correct-stop-condition-to-vc4_dsi_encode.patch bcm27xx/patches-5.10/950-0647-drm-vc4-Fix-timings-for-interlaced-modes.patch bcm27xx/patches-5.10/950-0695-drm-vc4-Fix-margin-calculations-for-the-right-bottom.patch Upstream sets the pixel clock to 340MHz now, do not set it to 600MHz any more. bcm27xx/patches-5.10/950-0576-drm-vc4-hdmi-Raise-the-maximum-clock-rate.patch Fixes: 89956c653252 ("kernel: bump 5.10 to 5.10.138") Fixes: 4209c33ae27d ("kernel: bump 5.10 to 5.10.137") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "mediatek: mt7622: fix banana pi r64 wps button"Petr Štetiar2022-08-281-40/+0
| | | | | | | | This reverts commit 5a81e0006380c301cdc691838f519275fc6c28d2 as it was backported upstream in commit a1e238690916 ("arm64: dts: mt7622: fix BPI-R64 WPS button"). Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: Refresh kernel patchesHauke Mehrtens2022-07-191-3/+3
| | | | | | No manual changes needed. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt7622: remove 300 MHz from dtsJohn Audia2022-07-191-0/+25
| | | | | | | | | | | | | | | | | Due to the bug described here[1], remove the 300 MHz clock to avoid a low voltage condition that can cause a hang when rebooting the RT3200/E8450. This solution is probably better than the script-based work-around[2]. 1. https://forum.openwrt.org/t/belkin-rt3200-linksys-e8450-wifi-ax-discussion/94302/1490 2. https://github.com/openwrt/openwrt/pull/5025 Signed-off-by: John Audia <therealgraysky@proton.me> Tested-by: Rui Salvaterra <rsalvaterra@gmail.com> Tested-by: John Audia <therealgraysky@proton.me> (cherry picked from commit d0d6b8e1833c587d0c50cac4f6324aa93b0bc8fc) [ fix the conflict by apply the patch to kernel 5.10 ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mediatek: mt7622: fix banana pi r64 wps buttonNick Hainke2022-07-041-0/+40
| | | | | | | | | | | | | | | | Fix the wps button to prevent wrongly detected recovery procedures. In the official banana pi r64 git the wps button is set to GPIO_ACTIVE_LOW and not GPIO_ACTIVE_HIGH. Import patch to fix on boot unwanted recovery entering: Press the [f] key and hit [enter] to enter failsafe mode Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level - failsafe button wps was pressed - - failsafe - Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry-picked from commit 668619425526cb0d43f8536a2f6f15a6314e6553)
* kernel: bump 5.10 to 5.10.125John Audia2022-06-272-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit 53d99fedc7afd96adfb6f38fc939c9ee9981c2ed)
* mediatek: add patches for MT7622 WED (wireless ethernet dispatch)Felix Fietkau2022-05-066-105/+8
| | | | | | | This series also contains other improvement for hardware flow offload support Signed-off-by: Felix Fietkau <nbd@nbd.name> (cherry-picked from commit 0f029b3d2b505b40aca9a24a002838ed1060f83d)
* mediatek: mt7622: remove '0x' prefix from pstore address in dtsDaniel Golle2022-04-231-1/+1
| | | | | | | | | | | | | | | Adresses of device tree nodes are typically noted without the '0x' prefix. While having the '0x' prefix doesn't hurt when using Linux, more recent versions of U-Boot will add a duplicate ramoops node as a simple string compare is used to check if the node is already present. Remove the '0x' prefix to avoid the kernel warning resulting from U-Boot adding a dupplicate pstore/ramoops node. See also https://lists.denx.de/pipermail/u-boot/2022-April/481810.html Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit fc245338d6e02e61fa7ecbd1a828aed97cdbef88)
* kernel: bump 5.10 to 5.10.110John Audia2022-04-101-1/+1
| | | | | | | | | | | | | | | | | | | Removed upstreamed: generic/backport-5.10/350-v5.18-MIPS-pgalloc-fix-memory-leak-caused-by-pgd_free.patch generic/pending-5.10/850-0014-PCI-aardvark-Fix-reading-PCI_EXP_RTSTA_PME-bit-on-em.patch ipq40xx/patches-5.10/105-ipq40xx-fix-sleep-clock.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Compile-/run-tested: ath79/generic (Archer C7 v2). Signed-off-by: Daniel Golle <daniel@makrotopia.org> [rebased in 22.03 tree] Signed-off-by: John Audia <graysky@archlinux.us> (cherry picked from commit b92ec82235b996ece32bc84af177adf1a4dcb90e)
* kernel: move parser_trx patches of custom magic to genericINAGAKI Hiroshi2022-03-063-107/+0
| | | | | | | | This patch moves the patches of parser_trx in mediatek target to generic/backport-5.10 to use the changes from ramips target and backport the additional patch of the parser. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
* kernel: bump 5.10 to 5.10.100John Audia2022-02-114-5/+5
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.98John Audia2022-02-114-5/+5
| | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* mt7622: bpi-r64: enable using mt7531 switch irqDaniel Golle2022-02-101-0/+13
| | | | | | | | | | Now that we support link-state-change interrupts, wire up MT7531 IRQ line which is connected to GPIO#53 according to the schematics [1]. As a result, PHY state no longer needs to be polled on that board. [1]: https://forum.banana-pi.org/t/bpi-r64-mt7622-schematic-diagram-public/10118 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: move mediatek BMT support patch to generic patchesFelix Fietkau2022-01-132-871/+36
| | | | | | | Preparation for supporting BMT on MT7621. Move source files to the files/ subdirectory in order to simplify maintenance Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek mt7622: fix 300mhz typo in dtsFritz D. Ansel2022-01-091-0/+27
| | | | | | | | | | | | | | The lowest frequency should be 300MHz, since that is the label assigned to the OPP in the mt7622.dtsi device tree, while there is one missing zero in the actual value. To be clear, the lowest frequency should be 300MHz instead of 30MHz. As mentioned @dangowrt on the OpenWrt forum there is no benefit in leaving 30MHz as the lowest frequency. Signed-off-by: Jip de Beer <gpk6x3591g0l@opayq.com> Signed-off-by: Fritz D. Ansel <fdansel@yandex.ru>
* mediatek: Clause-45 MDIO patch accepted upstreamDaniel Golle2022-01-056-255/+310
| | | | | | | To easy future maintainance, replace the local patch with what has been accepted into net-next and is likely to end up in Linux 5.17. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: let mtk_eth_soc MAC announce 2500Base-T modeDaniel Golle2022-01-051-0/+10
| | | | | | | | To allows Ethernet phys supporting 2500Base-T mode to announce that speed, enable the corresponding bit in mtk_eth_soc driver. This should hopefully unlock 2500Base-T speed on the UniFi 6 LR. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: yet again, replace patch with updated pending patchDaniel Golle2021-12-272-37/+125
| | | | | | | | | Upon comment of Russell King ('Oh no, not this "-1 disease" again.') clean up mdio read and write return type and value in mtk_eth_soc driver and also use appropriate return values for bus-busy-timeout- errors in newly added Clause 45 access code. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: replace patch with version sent upstreamDaniel Golle2021-12-272-94/+166
| | | | | | | | | Replace recently added patch 701-net-ethernet-mtk_eth_soc-add-support-for-clause-45-mdio.patch with version sent upstream 701-net-ethernet-mtk_eth_soc-implement-Clause-45-MDIO-access.patch Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: add support for Clause 45 MDIO accessDaniel Golle2021-12-261-0/+94
| | | | | | | Add support for Clause 45 MDIO PHY register read and write operations to mtk_eth_soc driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: bpi-r2: add ethernet alias to device treeDaniel Golle2021-12-181-0/+10
| | | | | | | Add ethernet0 alias in device tree to make U-Boot inherit the Ethernet mac address (set via environment variable 'ethaddr') down to Linux. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.84John Audia2021-12-172-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <graysky@archlinux.us>
* mediatek: enable bmt on mt7622-rfb1Felix Fietkau2021-12-041-0/+11
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mediatek: bmt: use generic mtd apiChuanhong Guo2021-12-041-50/+57
| | | | | | | | | | | BMT replaces nand-specific ops for erasing and writing, but the mtk-snand driver only implements generic mtd api. Replace erase, block_isbad, block_markbad in mtd_info for generic mtd drivers. Fixes: b600aee3ed ("mediatek: attach bmt to the new snand driver") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: bump 5.10 to 5.10.80Rui Salvaterra2021-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch [1] bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch [2] lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch [3] lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch [4] lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch [5] lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch [6] Manually rebased: ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=47462c5e600fbaffd755cd13dedd80d04e41ff83 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=2fde76df1885a6bec04317e457121326070450eb [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=9b366f5221d8aa64b22f35be137a5749326444ce [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=5af57ce8a6155fe3e4270d28d171abf8903bebc0 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=b92a5df2c7adc79a57481445f67de0c1c716581f [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=6b72caabc47011d03f44064452b2c65e8ed18326 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.76Rui Salvaterra2021-10-301-1/+1
| | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0145-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch [1] Manually rebased: bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch Note: although automatically rebaseable, the last patch has been edited to avoid conflicting bit definitions. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=b6f32897af190d4716412e156ee0abcc16e4f1e5 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.74Rui Salvaterra2021-10-211-1/+1
| | | | | | Patches automatically refreshed. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: add EEPROM data for BPi-R64 2.4GHz wmacDaniel Golle2021-10-151-0/+31
| | | | | | | | | | | EEPROM data extracted from vendor image found at http://forum.banana-pi.org/t/bpi-r64-mt7622-mac80211-wifi-driver/10246/77 http://forum.banana-pi.org/uploads/short-url/jworbyBYpvrw9VQ2sx92B9z6DWS.bin MAC address in the EEPROM has been zero'd which results in random address on boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: bpi-r2: add LED aliasesDaniel Golle2021-10-011-0/+29
| | | | | | Add aliases for LEDs in device tree of the BPi-R2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: provide power on mPCIe in SATA modeDaniel Golle2021-09-301-17/+2
| | | | | | | | | User reported that R64 doesn't provide power to the mPCIe slot in case the PCIe port is disabled as it is when selecting the SATA configuration. As users may still want to use USB-connected mPCIe modules in CN8 slot. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.67Rui Salvaterra2021-09-301-2/+2
| | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0312-vc4_hdmi-Set-HD_CTL_WHOLSMP-and-HD_CTL_CHALIGN_SET.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.61John Audia2021-08-2910-43/+17
| | | | | | | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-1031-net-lan78xx-Ack-pending-PHY-ints-when-resetting.patch Removed upstreamed: mvebu/patches-5.10/101-cpufreq-armada-37xx-forbid-cpufreq-for-1.2-GHz-variant.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* mediatek: bmt: set default bmt oob offset to 0Chuanhong Guo2021-08-271-1/+1
| | | | | | | | there's no driver level remapping of oob data in the new spi-nand driver and bmt oob signature starts at 0x0 of the dumped oob data. change the default value to 0 for the new spi-nand driver. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: attach bmt to the new snand driverChuanhong Guo2021-08-271-27/+36
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: change dts to use the new snand driverChuanhong Guo2021-08-274-137/+86
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: remove spi-nand hacks from 5.10Chuanhong Guo2021-08-274-1538/+0
| | | | | | | we now have a standalone mtd driver and the old spi-mem driver along with the hack in spi-nand core can be removed. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: add a new spi-nand driver for kernel 5.10Weijie Gao2021-08-271-0/+21
| | | | | | | | | | | | | This patch adds a new spi-nand driver which implements the SNFI of mt7622 and mt7629. Unlike the existing snfi driver which makes use of the spi-mem framework and the spi-nand framework with modified ecc support, this driver is implemented directly on the mtd framework with other components untouched, and provides better performance, and behaves exactly the same as the nand framework. Signed-off-by: Weijie Gao <hackpascal@gmail.com>
* mediatek: mt7623: backport musb, improve HDMI consoleDaniel Golle2021-08-214-0/+338
| | | | | | | | | Backport support for dual-role USB 2.0 as that's what is actually built-into MT7623. Improve HDMI console by enabling VT and setting up tty1..tty6. Re-add accidentally removed CONFIG_ARM_ARCH_TIMER. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: enable more hardware featuresDaniel Golle2021-08-212-3/+3
| | | | | | | In order to make HDMI console available on the BananaPi BPi-R2 select various Kconfig symbols which are useful for systems with graphics. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: convert mtd-mac-address to nvmem for MT7629 RFBAdrian Schmutzler2021-08-203-10/+33
| | | | | | | This conversion appears to have been overlooked since it's in a kernel patch. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.10 to 5.10.58Rui Salvaterra2021-08-141-1/+1
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kirkwood: import patch to fix build and refresh patchesDaniel Golle2021-08-052-2/+2
| | | | | | | | | kirkwood build broke due to missing include needed for ETH_ALEN. Add patch (sent upstream as well) to address that. Refresh patches for 5.4 and 5.10. Fixes: 91a52f22a1 ("treewide: backport support for nvmem on non platform devices") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.54Rui Salvaterra2021-07-291-49/+0
| | | | | | | Deleted (upstreamed) patches: mediatek/patches-5.10/000-spi-fix-fifo.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mediatek: mt7623: import patch to fix msi warningNick Hainke2021-07-297-18/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | The 1st generation MediaTek PCIe host bridge cannot handle Message Signaled Interrupts (MSIs). The core PCI code is not aware that MSI is not available. This results in warnings of the form: WARNING: CPU: 2 PID: 112 at include/linux/msi.h:219 pci_msi_setup_msi_irqs.constprop.8+0x64/0x6c Modules linked in: ahci(+) libahci libata sd_mod scsi_mod gpio_button_hotplug CPU: 2 PID: 112 Comm: kmodloader Not tainted 5.10.52 #0 Hardware name: Mediatek Cortex-A7 (Device Tree) Import patches that introduce the 'no_msi' attribute to signal missing MSI support to the core PCI. Refresh patches: - 000-spi-fix-fifo.patch - 330-mtk-bmt-support.patch - 510-net-mediatek-add-flow-offload-for-mt7623.patch - 601-PCI-mediatek-Use-regmap-to-get-shared-pcie-cfg-base.patch - 610-pcie-mediatek-fix-clearing-interrupt-status.patch - 700-net-ethernet-mtk_eth_soc-add-support-for-coherent-DM.patch - 710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: Fix Fidelix-FM35X1GA patchHauke Mehrtens2021-07-251-2/+2
| | | | | | | | This patch did not apply cleanly any more after support for the XTX flash was added to the generic patches. Fixes: 92012dd8677a ("kernel: Add support for XTX XT26G02A SPI NAND") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: mt7623: import patch to fix spiNick Hainke2021-07-241-0/+54
| | | | | | | | | | | | | | | | | | | | | | | The patch fixes the fifo rx mode for the mt7623. It is already accepted upstream for Linux Kernel 5.15. To test the spi we can change the dts file to &spi0 { pinctrl-names = "default"; pinctrl-0 = <&spi0_pins_a>; status = "okay"; spidev: spidev@0 { compatible = "linux,spidev"; spi-max-frequency = <1000000>; reg = <0>; }; }; Afterwards we should see a spidev device under /dev/. To test it we can further use spidev-test. Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: rework Bananapi BPi-R2Daniel Golle2021-07-202-0/+22
| | | | | | | | | | | | | * introduce recovery (=initramfs) vs. production dual boot scheme * make use of uImage.FIT (instead of FAT partition) * generate images using build steps (instead of external scripts) * simplify sysupgrade and config restore (thanks to uImage.FIT) * make sure mmc devices are ordered persistently (set DT aliases) This commit breaks sysupgrade from existing installations, you will have to re-install using the sdcard.img.gz image. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7623: import patch to fix flow offloadingDaniel Golle2021-07-201-0/+24
| | | | | | | Hardware flow offloading was reported to work when setting the right version identifier. Import a patch from Frank Wunderlich doing that. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.50Rui Salvaterra2021-07-172-2/+2
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 22:47:27 +0000