aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/imx6/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* build: add a config option for enabling a testing version of the target kernelFelix Fietkau2019-05-111-0/+1
| | | | | | | If the target supports a newer kernel version that is not used by default yet, it can be enabled with this option Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: Add support for Toradex Apalis family of CoMsPetr Štetiar2019-04-081-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for the following computer on modules (CoM) from Toradex[A]: Apalis iMX6 Quad 2GB IT - i.MX 6Quad 800MHz, 2GB DDR3, 4GB eMMC -40° to +85° C Temp Apalis iMX6 Quad 1GB - i.MX 6Quad 1GHz, 1GB DDR3, 4GB eMMC 0° to +70° C Temp Apalis iMX6 Dual 1GB IT - i.MX 6Dual 800MHz, 1GB DDR3, 4GB eMMC -40° to +85° C Temp Apalis iMX6 Dual 512MB - i.MX 6Dual 1GHz, 512MB DDR3, 4GB eMMC 0° to +70° C Temp I've developed and tested it on Quad 2GB IT v1.1A and Dual 512MB v1.1A CoMs, using Ixora[B] carrier board v1.0A, but it should hopefuly work on Eval[C] board as well. A. https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-freescale-imx-6 B. https://www.toradex.com/products/carrier-board/ixora-carrier-board C. https://www.toradex.com/products/carrier-board/apalis-evaluation-board Flashing/recovery instructions: 1. Download and compile imx_loader for OpenWrt from https://github.com/ynezz/imx_loader 2. Enter recovery mode as desribed in https://developer.toradex.com/knowledge-base/imx-recovery-mode 3. Connect board via USB to the host computer, check that it's connected by lsusb: 15a2:0054 Freescale Semiconductor, Inc. i.MX 6Dual/6Quad SystemOnChip in RecoveryMode 4. Copy following OpenWrt images to imx_loader directory: SPL u-boot.img u-boot-with-spl.imx openwrt-imx6-apalis-recovery.scr openwrt-imx6-apalis-squashfs.combined.bin 5. Run imx_usb in imx_loader directory Signed-off-by: Petr Štetiar <ynezz@true.cz>
* imx6: extend cubox support to hummingboard, add support for building full imagesFelix Fietkau2018-09-031-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: enable f2fs and loopback support in preparation for squashfs with ↵Felix Fietkau2018-09-031-1/+1
| | | | | | overlay support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: switch to Linux 4.14Tim Harvey2018-02-191-1/+1
| | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* imx6: move to Linux 4.9 kernelTim Harvey2017-02-111-1/+1
| | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: move to 4.4 kernelLuka Perkov2016-01-181-1/+1
| | | | | | Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 48298
* imx6: switch to v4.1Luka Perkov2015-11-181-1/+1
| | | | | | Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> SVN-Revision: 47506
* imx6: put uboot-envtools in DEFAULT_PACKAGESLuka Perkov2015-04-171-0/+2
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45478
* imx6: switch to 3.18Luka Perkov2015-04-111-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45370
* kernel: makefiles: make use of new var KERNEL_PATCHVERFelix Fietkau2014-10-241-1/+1
| | | | | | | | | | | replace all occurences of LINUX_VERSION with the cleaner approach. future kernel upgrades must mostly touch only one file. the only platform left is netlogic, because it uses a intermediate kernel 3.14.16 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> SVN-Revision: 43047
* targets: remove useless quotes around KERNELNAMEFelix Fietkau2014-10-051-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 42780
* kernel: update 3.14 to 3.14.18Luka Perkov2014-09-101-1/+1
| | | | | | | | Targets were build tested and patches are refreshed. Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42463
* imx6: switch to 3.14Luka Perkov2014-08-081-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 42074
* kernel: update to 3.10.49 Signed-off-by: John Crispin <blogic@openwrt.org>John Crispin2014-07-201-1/+1
| | | | SVN-Revision: 41776
* kernel: update 3.10.36->3.10.44John Crispin2014-06-261-1/+1
| | | | | | | | 205-fix-headers_install.patch is obseleted by upstream commit 3246a0352e3d58380b9386570f1db1faf7edf8a8 Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41351
* kernel: add a NAND_SUPPORT symbolJohn Crispin2014-06-111-1/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41122
* imx6: make boardname consistent with other targetsLuka Perkov2014-05-131-2/+2
| | | | | | Signed-off-by: Michael Heimpold <mhei@heimpold.de> SVN-Revision: 40758
* kernel: update 3.10 to 3.10.36Gabor Juhos2014-04-121-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40467
* kernel: update 3.10 to 3.10.34Gabor Juhos2014-03-271-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40291
* imx6: optimize for NEON FPU hardwareLuka Perkov2014-02-271-1/+1
| | | | | | | | | | The IMX6 SoC uses an ARM Cortext-A9 which has both NEON and VFPv3 hardware blocks. This will tune gcc to use neon instead of vfpv3 which will outperform VFPv3. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39760
* imx6: enable FPU for hard floatLuka Perkov2014-02-271-1/+1
| | | | | | | | | | | | | | The OpenWrt build system uses MACHINE_FEATURES of fpu to set the HAS_FPU which in turn sets the default of CONFIG_SOFT_FLOAT as well as uClibc configuration. As the IMX6 SoC has both vfpv3 and NEON hardware support we want to add fpu to the feature list. This will default the IMX6 target to use -mfloat-abi=hard which will the be most efficient use of floating point. When switching to hard float, we also need to enable VFP support in the kernel. Signed-off-by: Tim Harvey <tharvey@gateworks.com> SVN-Revision: 39759
* kernel: update 3.10 to 3.10.32Gabor Juhos2014-02-231-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39707
* kernel: update 3.10 to 3.10.28Gabor Juhos2014-01-261-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39399
* kernel: update 3.10 to 3.10.26Gabor Juhos2014-01-111-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39220
* imx6: add rtc feature supportLuka Perkov2013-12-171-1/+1
| | | | | | | Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 39111
* kernel: update kernel 3.10 to 3.10.24Hauke Mehrtens2013-12-151-1/+1
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39059
* kernel: update 3.10 to 3.10.21Gabor Juhos2013-12-011-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38972
* kernel: update 3.10 to 3.10.18Gabor Juhos2013-11-051-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38652
* imx6: drop unused variable from MakefileLuka Perkov2013-11-051-2/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38650
* kernel: update 3.10 to 3.10.17Gabor Juhos2013-10-231-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38506
* imx6: reorganize build systemLuka Perkov2013-10-181-1/+1
| | | | | | | | | | | | Changes include: * switching to profiles * adding ubifs support * building image for GW54XX board Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38441
* build: drop FIT option until we actually need itLuka Perkov2013-10-171-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38439
* imx6: enable FIT imagesLuka Perkov2013-10-161-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38432
* kernel: update kernel to 3.10.15Hauke Mehrtens2013-10-131-1/+1
| | | | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 38384
* imx6: add default profileLuka Perkov2013-10-021-2/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38282
* imx6: enable thermal module by defaultLuka Perkov2013-09-271-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38231
* kernel: update 3.10 to 3.10.13Gabor Juhos2013-09-271-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38228
* build: fix typoLuka Perkov2013-09-261-1/+1
| | | | | | | | vfp3 should be named vfpv3 Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 38222
* build: unify arm target cflagsFelix Fietkau2013-09-261-1/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 38211
* kernel: update 3.10 to 3.10.12Gabor Juhos2013-09-151-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38000
* kernel: update 3.10 to 3.10.10Gabor Juhos2013-09-021-1/+1
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37890
* imx6: add uboot-envtools to default packagesLuka Perkov2013-08-291-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37859
* kernel: update 3.10 to 3.10.9Gabor Juhos2013-08-231-1/+1
| | | | | | | | Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37832
* kernel: remove imx-sdma-fw because of license issuesLuka Perkov2013-08-121-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37755
* imx6: use kmod-imx-sdma-fw-imx6 by defaultLuka Perkov2013-08-111-1/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 37754
* kernel: update remaning platforms accidentally left out of r37617Felix Fietkau2013-07-301-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 37619
* imx6: update default packagesLuka Perkov2013-07-281-1/+2
| | | | SVN-Revision: 37582
* kernel: update 3.10 to 3.10.3Gabor Juhos2013-07-261-1/+1
| | | | | | | | Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37546
* kernel: update 3.10 to 3.10.2Gabor Juhos2013-07-221-1/+1
| | | | | | | | Also refresh 3.10 patches. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 37502
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 04:22:12 +0000