aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/generic/backport-5.10
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.101John Audia2022-03-012-16/+16
| | | | | | | | | | | | | | | | | Removed upstreamed: pending-5.10/841-USB-serial-option-add-ZTE-MF286D-modem.patch[1] bcm27xx/950-0592-drm-vc4-Allow-DBLCLK-modes-even-if-horz-timing-is-od.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=7113440a36c741efd7c76e3d70b3634100120cdb 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.101&id=21c890ca8eaecea06cabb92be2a53a6f26f56383 Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* mpc85xx: HiveAP-330: add tmp125 temperature sensorChristian Lamparter2022-02-251-0/+71
| | | | | | | | | | | the Aerohive HiveAP-330 and HiveAP-350 come equipped with an TI TMP125 temperature chip. This patch wires up the necessary support for this sensor and exposes it through hwmon / thermal sensor framework. Upstream support is coming, but it has to go through hwmon-next first. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: bump 5.10 to 5.10.98John Audia2022-02-111-6/+1
| | | | | | | | | | | | | Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: backport MT7530 IRQ supportDENG Qingfang2022-02-101-0/+425
| | | | | | | | | | | Support MT7530 PHY link change interrupts, and enable for MT7621. For external MT7530, a GPIO IRQ line is required, which is board-specific, so it should be added to each DTS. In case the interrupt-controller property is missing, it will fall back to polling mode. Signed-off-by: DENG Qingfang <dqfext@gmail.com>
* kernel: backport MediaTek Ethernet PHY driverDENG Qingfang2022-02-091-0/+159
| | | | | | | | | | | | | | Add support for MediaTek Gigabit Ethernet PHYs found in MT7530 and MT7531. Fix some link up/down issues. The errornous check for the PHY mode which broke things with MT7531 has been removed as suggested by patch net: phy: mediatek: remove PHY mode check on MT7531 As a result, things are working fine now on MT7622+MT7531 as well. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* Revert "kernel: backport MediaTek Ethernet PHY driver"Hauke Mehrtens2022-02-051-162/+0
| | | | | | | | | | | | | | | | | | This reverts commit 8b4cba53a9402f44da2dced4a78ca065b15dca94. This broke the mt7530 on Linksys e8450 (mt7622) for me. [ 1.312943] mt7530 mdio-bus:00 lan1 (uninitialized): failed to connect to PHY: -EINVAL [ 1.320890] mt7530 mdio-bus:00 lan1 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 0 [ 1.331163] mt7530 mdio-bus:00 lan2 (uninitialized): failed to connect to PHY: -EINVAL [ 1.339085] mt7530 mdio-bus:00 lan2 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 1 [ 1.349321] mt7530 mdio-bus:00 lan3 (uninitialized): failed to connect to PHY: -EINVAL [ 1.357241] mt7530 mdio-bus:00 lan3 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 2 [ 1.367452] mt7530 mdio-bus:00 lan4 (uninitialized): failed to connect to PHY: -EINVAL [ 1.375367] mt7530 mdio-bus:00 lan4 (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 3 [ 1.385750] mt7530 mdio-bus:00 wan (uninitialized): failed to connect to PHY: -EINVAL [ 1.393575] mt7530 mdio-bus:00 wan (uninitialized): error -22 setting up PHY for tree 0, switch 0, port 4 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* Revert "kernel: backport MT7530 IRQ support"Hauke Mehrtens2022-02-051-428/+0
| | | | | | | | | This reverts commit 3f4301e123f29348b4ad87578d62b7d1f5f210c6. This broke the mt7530 on Linksys e8450 (mt7622) for me. [ 1.300554] mt7530 mdio-bus:00: no interrupt support Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: backport MT7530 IRQ supportDENG Qingfang2022-02-051-0/+428
| | | | | | | | Support MT7530 PHY link change interrupts, and enable for MT7621. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MediaTek Ethernet PHY driverDENG Qingfang2022-02-051-0/+162
| | | | | | | | | Add support for MediaTek Gigabit Ethernet PHYs found in MT7530. Fix some link up/down issues. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 MDB operationsDENG Qingfang2022-02-051-0/+171
| | | | | | | | | Use hardware to forward multicast traffic instead of trapping to the host. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 VLAN fixDENG Qingfang2022-02-055-0/+523
| | | | | | | | Fix FDB learning bugs when VLAN filtering is enabled. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MT7530 ageing time supportDENG Qingfang2022-02-051-0/+99
| | | | | | | | Allow setting ageing time from 1 to 1,048,576 seconds. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: backport MediaTek jumbo frame supportDENG Qingfang2022-02-053-0/+286
| | | | | | | | Allow MTU up to 2026 on mediatek, ramips/mt7621 targets. Signed-off-by: DENG Qingfang <dqfext@gmail.com> Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com> Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
* ath79: kernel: drop _machine_restart againLech Perczak2022-02-051-0/+54
| | | | | | | | | | Backport patch ("MIPS: ath79: drop _machine_restart again"), which is required to support GPIO restart handler on ZTE MF286, broken due to _machine_restart being restored in kernel accidentally, wich causes any registered restart handlers to not execute, including one from ath79-reset driver. Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
* kernel: bump 5.10 to 5.10.96Rui Salvaterra2022-02-012-2/+2
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.94Rui Salvaterra2022-02-0117-39/+39
| | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0669-drm-vc4-hdmi-Make-sure-the-device-is-powered-with-CE.patch [1] bcm27xx/patches-5.10/950-0672-drm-vc4-hdmi-Move-initial-register-read-after-pm_run.patch [1] gemini/patches-5.10/0003-ARM-dts-gemini-NAS4220-B-fis-index-block-with-128-Ki.patch [2] Manually rebased: bcm27xx/patches-5.10/950-0675-drm-vc4-hdmi-Drop-devm-interrupt-handler-for-CEC-int.patch Manually reverted: generic/pending-5.10/860-Revert-ASoC-mediatek-Check-for-error-clk-pointer.patch [3] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=55b10b88ac8654fc2f31518aa349a2e643b37f18 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.94&id=958a8819d41420d7a74ed922a09cacc0ba3a4218 [3] https://lore.kernel.org/all/trinity-2a727d96-0335-4d03-8f30-e22a0e10112d-1643363480085@3c-app-gmx-bap33/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: bump 5.10 to 5.10.92Rui Salvaterra2022-01-1613-84/+19
| | | | | | Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: Backport Armada 3720 comphy patches from 5.15Marek Behún2022-01-152-0/+117
| | | | | | | | | Backport 2 patches for Armada 3720 comphy from 5.15 kernel. These are needed for clear application of pending patches that fix this driver. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: 5.10: Backport pci-aardvark driver changes from 5.17Marek Behún2022-01-1511-0/+545
| | | | | | | | | | | | | | Backport Aardvark PCIe controller driver changes that will appear in 5.17 kernel. They are currently accessible on LKML [1], in linux-next repository [2], or in Bjorn Helgaas' repository [3]. These changes mainly enhance driver removal method. [1] https://lore.kernel.org/linux-pci/20211130172913.9727-1-kabel@kernel.org/ [2] https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/log/drivers/pci?h=next-20220107 [3] https://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git/log/?h=next Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: bump 5.10 to 5.10.90Rui Salvaterra2022-01-071-1/+1
| | | | | | | | Add and enable a new kconfig knob to disable unprivileged eBPF by default. Patches automatically rebased. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: backport qca8k new featureAnsuel Smith2022-01-039-0/+1273
| | | | | | | | | | | Backport qca8k new feature: - Ageing configuration support - Add 2 missing counter on qca8337 - Convert to regmap - Standardize define and code with GENMASK AND BITFILED macro - Add mdb add/del support Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: 5.10: backport additional qca8k fixesAnsuel Smith2022-01-033-0/+123
| | | | | | | | | Backport 3 additional fixes for qca8k. - Fix MTU calculation - Fix a bug with config set to the wrong PAD when secondary cpu port is defined. - Fix redundant check in parse_port_config Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* kernel: bump 5.10 to 5.10.89Rui Salvaterra2022-01-031-1/+1
| | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0186-pinctrl-bcm2835-Change-init-order-for-gpio-hogs.patch [1] sunxi/patches-5.10/103-arm64-dts-allwinner-orangepi-zero-plus-fix-PHY-mo.patch [2] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.89&id=ba696b470839d70c6b8290c1f798bac7fb2a584c [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.89&id=93a957bbf46ceb224b959de61fe85cfc6f71b6c7 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: generic: backport linkstation-poweroff driverPawel Dembicki2021-12-291-0/+27
| | | | | | | | | | | Linkstation poweroff driver was added to mvebu target, but is required for kirkwood target too. This commit make two changes: - move linkstation-poweroff support patch from mvebu to generic and replace upstream accepted version - backport small linkstation-poweroff fix from 5.12 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: bump 5.10 to 5.10.88Rui Salvaterra2021-12-271-2/+2
| | | | | | | | | Deleted (upstreamed): mpc85xx/patches-5.10/002-powerpc-85xx-fix-oops-when-CONFIG_FSL_PMC-n.patch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.88&id=151ffac3ac277ad7c2a5f201b566b56d97ed3a99 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.85John Audia2021-12-172-3/+3
| | | | | | | | | | | | | | | | Removed target for patch which does not exist: bcm27xx/patches-5.10/950-0249-kbuild-Disable-gcc-plugins.patch All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800* Run-tested: bcm2711/RPi4B, ipq806x/R7800* * Had to revert 7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build (binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149) Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.84John Audia2021-12-175-16/+16
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.83John Audia2021-12-123-9/+9
| | | | | | | | | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0024-ARM-dts-BCM5301X-Fix-I2C-controller-interrupt.patch[1] bcm53xx/patches-5.10/033-v5.16-0025-ARM-dts-BCM5301X-Add-interrupt-properties-to-GPIO-no.patch[2] All other patches automatically rebased. 1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=b2cd6fdcbe0a5cb44e4610a08cc58261d494a885 2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.83&id=9db1d4a3c2700e1cc84c3d61199411d75c2a3ec6 Build system: x86_64* Build-tested: bcm2711/RPi4B, ipq806x/R7800† Run-tested: bcm2711/RPi4B, ipq806x/R7800† * Had to revert 7c99085bd69742f66207d61e9f2da5ec4f8f9d2f in order to build (latest bump of ca-certificates) † Had to revert 7f1edbd41295dff9f2127b169fbc086c0fb2c14e in order to build (binutils 2.37, https://bugs.openwrt.org/index.php?do=details&task_id=4149) Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.82John Audia2021-11-272-2/+2
| | | | | | | | | | | | | | | | Removed upstreamed: bcm53xx/patches-5.10/033-v5.16-0014-ARM-dts-NSP-Fix-mpcore-mmc-node-names.patch Manually rebased: ipq806x/patches-5.10/086-ipq8064-fix-duplicate-node.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.81John Audia2021-11-272-3/+3
| | | | | | | | | | | | | Manually rebased: octeontx/patches-5.10/0004-PCI-add-quirk-for-Gateworks-PLX-PEX860x-switch-with-.patch All other patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, ipq806x/R7800 Run-tested: bcm2711/RPi4B, ipq806x/R7800 Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.10 to 5.10.80Rui Salvaterra2021-11-198-22/+22
| | | | | | | | | | | | | | | | | | | | | | Deleted (upstreamed): ath79/patches-5.10/921-serial-core-add-support-for-boot-console-with-arbitr.patch [1] bcm53xx/patches-5.10/033-v5.15-0012-ARM-dts-BCM5301X-Fix-memory-nodes-names.patch [2] lantiq/patches-5.10/0016-mtd-rawnand-xway-Keep-the-driver-compatible-with-on-.patch [3] lantiq/patches-5.10/0110-MIPS-lantiq-dma-add-small-delay-after-reset.patch [4] lantiq/patches-5.10/0111-MIPS-lantiq-dma-reset-correct-number-of-channel.patch [5] lantiq/patches-5.10/0112-MIPS-lantiq-dma-fix-burst-length-for-DEU.patch [6] Manually rebased: ipq806x/patches-5.10/0065-arm-override-compiler-flags.patch [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=47462c5e600fbaffd755cd13dedd80d04e41ff83 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=2fde76df1885a6bec04317e457121326070450eb [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=9b366f5221d8aa64b22f35be137a5749326444ce [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=5af57ce8a6155fe3e4270d28d171abf8903bebc0 [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=b92a5df2c7adc79a57481445f67de0c1c716581f [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.80&id=6b72caabc47011d03f44064452b2c65e8ed18326 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: backport explicit MAC06 disable patchMatthew Hagan2021-11-151-0/+47
| | | | | | | | | Backport of Ansuel Smith's "net: dsa: qca8k: make sure PAD0 MAC06 exchange is disabled", to ensure mac06 is disabled even if enabled by the bootloader. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: bump 5.10 to 5.10.79Rui Salvaterra2021-11-131-4/+4
| | | | | | | | | Manually rebased: generic/backport-5.10/810-v5.13-usb-ehci-add-spurious-flag-to-disable-overcurrent-ch.patch Tested-by: John Audia <graysky@archlinux.us> Tested-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.78John Audia2021-11-071-2/+2
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B Run-tested: bcm2711/RPi4B Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: 5.10: compress 7xx patch numberingMatthew Hagan2021-11-0793-0/+0
| | | | | | | | | The qca8k patch series brings the numbering to 799. This patch renames 7xx patches to create space for more backports to be added. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com> [rename 729->719] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* kernel: bump 5.10 to 5.10.77Rui Salvaterra2021-11-066-19/+19
| | | | | | | | | Deleted (upstreamed): bcm53xx/patches-5.10/081-v5.15-Revert-pinctrl-bcm-ns-support-updated-DT-binding-as-.patch [1] [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=01c2881bb0e0a71b87ca425e1b763ac13855aa7e Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.76Rui Salvaterra2021-10-305-9/+9
| | | | | | | | | | | | | | | | Deleted (upstreamed): bcm27xx/patches-5.10/950-0145-xhci-add-quirk-for-host-controllers-that-don-t-updat.patch [1] Manually rebased: bcm27xx/patches-5.10/950-0355-xhci-quirks-add-link-TRB-quirk-for-VL805.patch bcm53xx/patches-5.10/180-usb-xhci-add-support-for-performing-fake-doorbell.patch Note: although automatically rebaseable, the last patch has been edited to avoid conflicting bit definitions. [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=linux-5.10.y&id=b6f32897af190d4716412e156ee0abcc16e4f1e5 Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: 5.10: qca8k: backport qca8k_setup tidy-upMatthew Hagan2021-10-241-0/+151
| | | | | | | | Tidy qca8k_setup for loops relating to port handling. No functional changes. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport qca8k cpu_port_index fix in parse_port_configMatthew Hagan2021-10-241-0/+28
| | | | | | | Add cpu_port_index fix to apply settings to correct CPU port. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport qca8k feature additionsMatthew Hagan2021-10-2416-0/+1991
| | | | | | | | | | | | | | | | Backport Ansuel Smith's various qca8k feature additions: - mac-power-sel support - SGMII PLL explicit enable - tx/rx clock phase to falling edge - power-on-sel and LED open drain mode - cpu port 6 - qca8328 support - sgmii internal delay - move port config to dedicated struct - convert to yaml schema Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport QCA83x PHY resume fix, DAC amplitude preferred ↵Matthew Hagan2021-10-244-0/+376
| | | | | | | | | | | master, debug reg names Backport workaround for QCA8327 PHY resume, which does not properly support genphy_suspend/resume. Also add DAC amplitude fix for the QCA8327 PHY, set port to preferred master and add proper names to debug regs. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport at803x QCA83xx phy support improvementsMatthew Hagan2021-10-243-0/+205
| | | | | | | | | | This commit add accepted upstream patches that improve & tidy qca83xx support. 1 - Split qca8327 to A & B variants, identifiable by phy_id 2 - Add suspend/resume support to qca8xx phys 3 - Tidy spacing and phy naming. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport at803x internal QCA8327 PHY supportMatthew Hagan2021-10-241-0/+48
| | | | | | | | | Add support for qca8327 internal phy needed for correct init of the switch port. It does use the same qca8337 function and reg just with a different id. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport qca8k legacy mdio mapping panic fixMatthew Hagan2021-10-241-0/+80
| | | | | | | | Add backport of Ansuel Smith's "net: dsa: qca8k: fix kernel panic with legacy mdio mapping" patch. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport additional qca8k fixesMatthew Hagan2021-10-245-0/+537
| | | | | | | | | | | | Backport fixes including: net: dsa: qca8k: fix missing unlock on error in qca8k_vlan_(add|del) net: dsa: qca8k: check return value of read functions correctly net: dsa: qca8k: add missing check return value in qca8k_phylink_mac_config() net: dsa: qca8k: fix an endian bug in qca8k_get_ethtool_stats() net: dsa: qca8k: check the correct variable in qca8k_set_mac_eee() Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: 5.10: backport qca8k stability improvementsMatthew Hagan2021-10-2424-0/+2655
| | | | | | | | | This is a backport of Ansuel Smith's "Multiple improvement to qca8k stability" series. The QCA8337 switch is available on multiple platforms including ipq806x, ath79 and bcm53xx. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: backport GPIO LED patch for MT7530Rosen Penev2021-10-232-3/+184
| | | | | | | | | | | | | | | This allows to specify and control switch LEDs on devices using mt7530 (typically mediatek and ramips targets). Normally these LED GPIOs are 0, 3, 6, 9, and 12. wan/lan assignment is per device. GPIO 9 is normally inverted. so GPIO_ACTIVE_HIGH instead of GPIO_ACTIVE_LOW. Tested on Linksys E7350. Refreshed all patches. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: 5.10: backport Marvell 88E1510/2 PHY SFP supportRobert Marko2021-10-212-0/+710
| | | | | | | | | | | | | Backport upstream SFP support for the Marvell 88E1510/2 PHY-s. Globalscale MOCHAbin uses this PHY for the hybrid WAN port that has 1G SFP and 1G RJ45 with PoE PD connected to it. This allows the SFP port to be used on it as well as parsing the SFP module details with ethtool. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* kernel: 5.10: backport 100 BaseX SFP supportRobert Marko2021-10-212-0/+96
| | | | | | | | | | Backport upstream support for 100Base-FX, 100Base-LX, 100Base-PX and 100Base-BX10 SFP modules. This is a prerequisite for the Globalscale MOCHAbin hybrid 1G SFP/Copper support backporting. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* kernel: backport a rewrite of the mips eBPF JIT implementationFelix Fietkau2021-10-148-1/+4748
| | | | | | | This adds support for eBPF JIT for 32 bit targets and significantly improves correctness. Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-03 13:11:11 +0000