aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/bcm53xx
Commit message (Collapse)AuthorAgeFilesLines
* kernel: backport GD25Q256 support from 4.15Kuan-Yi Li2020-12-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Backport below changes for GigaDevice GD25Q256 support from v4.15: e27072851bf7 mtd: spi-nor: add a quad_enable callback in struct flash_info 65153846b18c mtd: spi-nor: add support for GD25Q256 This chip is used on newer Quad-E4G boards. Before: [ 2.366493] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 19 [ 2.372853] m25p80: probe of spi0.0 failed with error -2 After: [ 2.371722] m25p80 spi0.0: gd25q256 (32768 Kbytes) [ 2.376694] 5 fixed-partitions partitions found on MTD device spi0.0 [ 2.383043] Creating 5 MTD partitions on "spi0.0": [ 2.387824] 0x000000000000-0x000000030000 : "u-boot" [ 2.394138] 0x000000030000-0x000000031000 : "u-boot-env" [ 2.400608] 0x000000031000-0x000000040000 : "config" [ 2.406830] 0x000000040000-0x000000050000 : "factory" [ 2.413169] 0x000000050000-0x000002000000 : "firmware" Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
* bcm53xx: add support for Luxul FullMAC WiFi devicesDan Haab2020-04-072-1/+36
| | | | | | | | | | | This prepares support for models XAP-1610 and XWR-3150. Flashing requires using Luxul firmware version: 1) 8.1.0 or newer for XAP-1610 2) 6.4.0 or newer for XWR-3150 and uploading firmware using "Firmware Update" web UI page. Signed-off-by: Dan Haab <dan.haab@legrand.com> (cherry picked from commit c459a6bf482f5afc4746a4a108a143e9194cd59d)
* bcm53xx: refactor board.d code in 02_networkRafał Miłecki2020-04-071-94/+95
| | | | | | | | | | | | 1. Use functions for cleaner code 2. Always execute WAN interface generic code Before this change WAN interface code wasn't executed on all devices due to an early "exit 0". Acked-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit b51ea43f900191bc8ce7411dad39239fac6df4f8)
* bcm53xx: sysupgrade: optimize building UBI imageRafał Miłecki2020-04-071-3/+3
| | | | | | | | | | Use "truncate" to adjust size of existing file instead of "dd" which required creating a copy. This saves space on tmpfs. It may be as low as 2.1 MiB when using OpenWrt default user space and way more (20+ MiB) when flashing vendor firmware. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 8abefc8896e7138a101fbb3d228946c43321503e)
* bcm53xx: fix ASUS firmwares to use vendor formatRafał Miłecki2020-04-071-2/+12
| | | | | | | | | Image building process was missing "asus-trx" step which resulted in raw TRX files (without ASUS footer with device id). Fixes: 0b9de8daa70e ("bcm53xx: add profiles for all other (SoftMAC) devices") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 0493d57e04774d47921a7d2014b567455d5dc16b)
* kernel: bump 4.14 to 4.14.171Koen Vandeputte2020-02-241-1/+1
| | | | | | | | | | | | Refreshed all patches. Fixes: - CVE-2013-1798 Compile-tested on: cns3xxx Runtime-tested on: cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: build images for Luxul ABR-4500 and XBR-4500 routersDan Haab2020-02-072-0/+36
| | | | | | | | | | | Luxul ABR-4500 and XBR-4500 devices are wired routers with 5 Ethernet ports and 1 USB 3.0 port. Flashing requires using Luxul firmware 6.4.0 or newer and uploading firmware using "Firmware Update" web UI page. Signed-off-by: Dan Haab <dan.haab@legrand.com> (cherry picked from commit 1d47f81581bcd476487e5b29314602167a843b99) [rmilecki: use DEVICE_TITLE for 19.07] Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: sysupgrade: support Luxul NAND devicesDan Haab2019-10-151-0/+2
| | | | | | | This adds support for UBI-aware sysupgrade using Luxul formats. Signed-off-by: Dan Haab <dan.haab@legrand.com> (cherry picked from commit 63c43e5674f346b8ed13377d551e5699afbeb673)
* treewide: remove 4.19 leftoversKoen Vandeputte2019-10-081-363/+0
| | | | | | | 19.07 branch focuses on kernel 4.14 so remove all remaining 4.19 configs Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: fix serial console on Luxul XWC-2000Rafał Miłecki2019-10-041-0/+11
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit fedc5b65dc67c0687f0d1b8dafbacf8e7ab899d2)
* bcm53xx: fix sysupgrade for Luxul XWC-2000Rafał Miłecki2019-10-041-1/+1
| | | | | | | Use a correct "compatible" value as in the upstream DTS file. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 64b7dbb3000b7e8772fea40b35ac6ec717f9f822)
* bcm53xx: add pending patch adding Luxul XWC-2000 DTS fileRafał Miłecki2019-10-042-1/+81
| | | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit 06091afada06183f541106b3c688a5d30d85c25b)
* bcm53xx: sysupgrade: support Luxul firmware formatDan Haab2019-09-161-0/+84
| | | | | | | | Allow flashing Luxul devices using vendor firmware format. The next step will be building proper images once they are conirmed to work. Signed-off-by: Dan Haab <dan.haab@legrand.com> (cherry picked from commit bc5db7364d1e00be5bbe5444e81c40571fbd696d)
* bcm53xx: extend firmware validationRafał Miłecki2019-09-121-1/+11
| | | | | | | | This provides TRX validation result to the validation JSON. It also prevents users from installing broken firmware files. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit c19b9f9a2623c110222210d04f75ace0e594c7e9)
* bcm53xx: sysupgrade: call nand_do_upgrade() from platform_do_upgrade()Rafał Miłecki2019-09-041-17/+12
| | | | | | | | | | | | Calling nand_do_upgrade() from platform_pre_upgrade() was obsoleted in the commit 30f61a34b4cf ("base-files: always use staged sysupgrade"). This change brings bcm53xx in sync with other targets and allows dropping backward compatibility code. It shouldn't change any user visible behavior. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> (cherry picked from commit ccf8a8e8633ccfd94fda233b06055ac42e4c9fd5)
* kernel: bump 4.14 to 4.14.125 (FS#2305 FS#2297)Koen Vandeputte2019-06-121-3/+3
| | | | | | | | | | | | | | | | Refreshed all patches. This bump contains upstream commits which seem to avoid (not properly fix) the errors as seen in FS#2305 and FS#2297 Altered patches: - 403-net-mvneta-convert-to-phylink.patch - 410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch Compile-tested on: ar71xx, cns3xxx, imx6, mvebu, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: drop everything not on kernel version 4.14Daniel Golle2019-06-1224-1896/+0
| | | | | | | | | | * Remove testing patches for kernel version 4.19 * remove targets ar7, ixp4xx, orion Those targets are still on kernel 4.9, patches for 4.14 were not ready in time. They may be readded once people prepare and test patches for kernel 4.14. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* build: add a config option for enabling a testing version of the target kernelFelix Fietkau2019-05-111-0/+1
| | | | | | | If the target supports a newer kernel version that is not used by default yet, it can be enabled with this option Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: bump 4.19 to 4.19.34Koen Vandeputte2019-04-082-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | Refreshed all patches. Removed: - 030-PCI-dwc-skip-MSI-init-if-MSIs-have-been-explicitly-d.patch Altered: - 366-netfilter-nf_flow_table-clean-up-and-fix-dst-handlin.patch - 650-netfilter-add-xt_OFFLOAD-target.patch - 662-remove_pfifo_fast.patch - 332-arc-add-OWRTDTB-section.patch - 100-clocksource-drivers-arch_timer-Workaround-for-Allwin.patch - 702-phy_add_aneg_done_function.patch New symbols: - ARC_IRQ_NO_AUTOSAVE - SUN50I_ERRATUM_UNKNOWN1 Compile-tested: cns3xxx, imx6, sunxi Runtime-tested: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: add first DTS changes queued for the Linux 5.1Rafał Miłecki2019-02-016-60/+154
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: add support for Phicomm K3Hao Dong2019-01-204-0/+241
| | | | | | | | | | | | | | | | | | | | | | | Hardware specifications: - CPU: Broadcom BCM4709C0 @1.4GHz (Dual-Core ARM) - RAM: 512 MB (DDR3) - Flash: 128 MB (NAND) - LAN ports: 3, LAN speed: 10/100/1000 - WAN ports: 1, WAN speed: 10/100/1000 - 2.4G: BCM4366 4x4 MIMO 1000Mbps -- Skyworks SE2623L 2.4GHz Power Amplifier (x4) - 5G: BCM4366 4x4 MIMO 2167Mbps -- RFMD RFPA5542 5GHz Power Amplifier Module (x4) - USB: 1x USB 3.0 port - 1x LED, 1x reset button, 1x power switch - 1x system status touch screen Flash: - Enter CFE - Upload the trx file - Reboot Signed-off-by: Hao Dong <halbertdong@gmail.com>
* kernel: bump 4.19 to 4.19.16Stijn Tintel2019-01-172-3/+3
| | | | | | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: - backport/096-mips-math-emu-Write-protect-delay-slot-emulation-pages.patch - backport/096-v4.20-netfilter-ipv6-Preserve-link-scope-traffic-original-.patch - backport/424-v4.20-net-dsa-fix-88e6060-roaming.patch - hack/100-mtd-rawnand-qcom-fix-memory-corruption-that-causes-p.patch - pending/510-f2fs-fix-sanity_check_raw_super-on-big-endian-machines.patch Update patch that no longer applies: - backport/343-netfilter-nft_flow_offload-handle-netdevice-events-f.patch Compile-tested: mesongx Runtime-tested: mesongx Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.14 to 4.14.93Stijn Tintel2019-01-141-2/+2
| | | | | | | | | | | | | Refresh patches. Remove upstreamed patches: - backport/096-mips-math-emu-Write-protect-delay-slot-emulation-pages.patch - pending/510-f2fs-fix-sanity_check_raw_super-on-big-endian-machines.patch - brcm2708/950-0415-qmi_wwan-apply-SET_DTR-quirk-to-the-SIMCOM-shared-de.patch Compile-tested: ar71xx, ath79, brcm2708/bcm27{08,10}, octeon, x86/64 Runtime-tested: ar71xx, ath79, brcm2708/bcm27{08,10}, octeon, x86/64 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: bump 4.14 to 4.14.91Koen Vandeputte2019-01-071-1/+1
| | | | | | | | | | | | Refreshed all patches. Removed upstreamed: - 500-ubifs-Handle-re-linking-of-inodes-correctly-while-re.patch Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: update 4.19 configRafał Miłecki2018-12-271-20/+20
| | | | | | | There were 3 new symbols possible to choose: ARCH_BCM_HR2, PCI_V3_SEMI and PHY_BCM_SR_PCIE. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: add support for the kernel 4.19Rafał Miłecki2018-12-2722-0/+2097
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport DTS changes queued for the 4.21Rafał Miłecki2018-12-279-8/+180
| | | | | | It just replaces some downstream patches & adds relicensing work. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: rename dts backport patches changing their prefixesRafał Miłecki2018-12-2716-0/+0
| | | | | | | Start 03x with 030 instead of 035. It's a trivial change that adds more place for further backports in the 03x space. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: update pinctrl driver & use its new DT bindingRafał Miłecki2018-12-252-0/+130
| | | | | | | Driver has been updated upstream to support more precise DT binding and avoid mapping conflicts between pinctrl and USB 2.0 PHY. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: include WiFi firmware for devices with 4366C0Rafał Miłecki2018-12-171-1/+1
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 4.14 to 4.14.88Koen Vandeputte2018-12-141-3/+3
| | | | | | | | | | | | | | | Refreshed all patches. Altered patches: - 180-usb-xhci-add-support-for-performing-fake-doorbell.patch Fixes CVE: - CVE-2018-14625 Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.86Koen Vandeputte2018-12-102-7/+7
| | | | | | | | | | | | Refreshed all patches. Altered patches: - 180-usb-xhci-add-support-for-performing-fake-doorbell.patch Compile-tested on: ar71xx, cns3xxx, imx6 Runtime-tested on: ar71xx, cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: request Seama parser on DIR-885L directlyRafał Miłecki2018-11-222-1/+25
| | | | | | | | It's more reliable as mtd subsystem doesn't have to blindly try that parser. It allows disabling MTD_SPLIT_FIRMWARE completely (TRX is handled in a similar way). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 4.14 to 4.14.81Koen Vandeputte2018-11-141-44/+0
| | | | | | | | | | | | | | | Refreshed all patches. Removed upstreamed patches: - 081-spi-bcm-qspi-switch-back-to-reading-flash-using-smal.patch Altered patches: - 0054-cpufreq-dt-Handle-OPP-voltage-adjust-events Compile-tested on: cns3xxx, imx6, ipq806x, x86_64 Runtime-tested on: cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: add DT patch describing pins mux controllerRafał Miłecki2018-11-091-0/+73
| | | | | | It's needed to support new devices that use specific pin functions. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: update pinctrl driverRafał Miłecki2018-11-092-0/+39
| | | | | | It's upstream now with a one trivial fix. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 4.14 to 4.14.79Koen Vandeputte2018-11-051-1/+1
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx, cns3xxx, imx6, x86_64 Runtime-tested on: ar71xx, cns3xxx, imx6, x86_64 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: add missing symbol for target bcm53xxKoen Vandeputte2018-10-231-0/+1
| | | | | | | Fixes: ca88f4153f8f ("kernel: bump 4.14 to 4.14.77") Reported-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* bcm53xx: use upstream SPI controller fixRafał Miłecki2018-10-231-3/+5
| | | | | | This just moves patch to use 0xx prefix and includes maintainer's s-o-b. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 4.14 to 4.14.78Koen Vandeputte2018-10-221-1/+1
| | | | | | | | | | | | Refreshed all patches. Remove upstreamed: - 050-net-emac-fix-fixed-link-setup-for-the-RTL8363SB-swit.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* treewide: use wpad-basic for not small flash targetsMathias Kresin2018-10-161-1/+1
| | | | | | | | | | | | Add out of the box support for 802.11r and 802.11w to all targets not suffering from small flash. Signed-off-by: Mathias Kresin <dev@kresin.me> Mathias did all the heavy lifting on this, but I'm the one who should get shouted at for committing. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* bcm53xx: add pending pinctrl driverRafał Miłecki2018-10-112-0/+427
| | | | | | | It's required to support devices using adjustable SoC pins for some specific purpose (e.g. I2C, PWM, UART1). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: replace SPI revert with a fix sent upstreamRafał Miłecki2018-10-112-146/+42
| | | | | | | | | Instead of reverting whole commit it's enough to just revert a single line change. It seems the real problem with the regressing commit was a bump of read chunk size. Switching back to 256 B chunks is enough to fix the problem/regression. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: added basic dts for linksys ea6500v2Rene Kjellerup2018-10-072-1/+70
| | | | | | | | only thing not working is the b43 5GHz wifi band as upstream kernel doesn't supporthe 0x4360 chip so far Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com>
* kernel: bump 4.14 to 4.14.72Koen Vandeputte2018-09-261-3/+3
| | | | | | | | | | | | | | | | | | | Refreshed all patches. Removed upstreamed: - 203-MIPS-ath79-fix-restart.patch - 0013-MIPS-ath79-fix-system-restart.patch - 180-earlycon-initialize-port-uartclk-based-on-clock-frequency-property.patch - 181-earlycon-remove-hardcoded-port-uartclk-initialization-in-of_setup_earlycon. patch - 700-1-6-e1000e-Remove-Other-from-EIAC.patch - 700-2-6-Partial-revert-e1000e-Avoid-receiver-overrun-interrupt-bursts.patch - 700-3-6-e1000e-Fix-queue-interrupt-re-raising-in-Other-interrupt.patch - 700-4-6-e1000e-Avoid-missed-interrupts-following-ICR-read.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: pick earlycon regression fixes from the stable-queue.gitRafał Miłecki2018-09-241-33/+0
| | | | | | | This fixes regression introduced in kernel 4.14 and makes bcm53xx revert obsolete. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* kernel: bump 4.14 to 4.14.67Koen Vandeputte2018-08-281-24/+0
| | | | | | | | | | | | Refreshed all patches. Removed upstreamed patches: - 037-v4.18-0008-ARM-dts-BCM5301x-Fix-i2c-controller-interrupt-type.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.59Stijn Tintel2018-07-311-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Drop patch that was superseded upstream: ramips/0036-mtd-fix-cfi-cmdset-0002-erase-status-check.patch Drop upstreamed patches: - apm821xx/020-0001-crypto-crypto4xx-remove-bad-list_del.patch - apm821xx/020-0011-crypto-crypto4xx-fix-crypto4xx_build_pdr-crypto4xx_b.patch - ath79/0011-MIPS-ath79-fix-register-address-in-ath79_ddr_wb_flus.patch - brcm63xx/001-4.15-08-bcm63xx_enet-correct-clock-usage.patch - brcm63xx/001-4.15-09-bcm63xx_enet-do-not-write-to-random-DMA-channel-on-B.patch - generic/backport/080-net-convert-sock.sk_wmem_alloc-from-atomic_t-to-refc.patch - generic/pending/170-usb-dwc2-Fix-DMA-alignment-to-start-at-allocated-boun.patch - generic/pending/900-gen_stats-fix-netlink-stats-padding.patch In 4.14.55, a patch was introduced that breaks ext4 images in some cases. The newly introduced patch backport-4.14/500-ext4-fix-check-to-prevent-initializing-reserved-inod.patch addresses this breakage. Fixes the following CVEs: - CVE-2018-10876 - CVE-2018-10877 - CVE-2018-10879 - CVE-2018-10880 - CVE-2018-10881 - CVE-2018-10882 - CVE-2018-10883 Compile-tested: ath79, octeon, x86/64 Runtime-tested: ath79, octeon, x86/64 Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* bcm53xx: revert SPI controller commit breaking flash readsRafał Miłecki2018-07-291-0/+146
| | | | | | | That upstream commit caused instability in flash reads. It was reported but there isn't any proper fix as for now. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* bcm53xx: backport BCM5301X/BCM53573 dts commits from 4.19+Rafał Miłecki2018-07-287-104/+475
| | | | | | | This includes Linksys EA9500 support, BCM53573 timer fix and upstream-ready partitions patch that replaces two downstream hacks. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 08:23:44 +0000