aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: add support for TP-Link TL-WDR6500 v2John Crispin2015-08-171-0/+141
| | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds support for TP-Link TL-WDR6500 v2. The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for the whole firmware, so I have to create a new firmware creation method. SVN-Revision: 46663
* ar71xx: add 64kb bootloader mtd parser for tplinkpartJohn Crispin2015-08-171-6/+29
| | | | | | | | | | | Signed-off-by: Weijie Gao <hackpascal@gmail.com> This patch adds flash layout parser for TP-Link firmwares which have a 64kb bootloader. This is used for TP-Link TL-WDR6500 v2. SVN-Revision: 46662
* ar71xx: Add support for Black SwiftJohn Crispin2015-08-171-0/+83
| | | | | | | | | | | | Add support for the Black Swift board: http://www.black-swift.com/ Took relevant parts and slightly adapted from: https://github.com/blackswift/openwrt/blob/master/bsb.patch Signed-off-by: Bruno Randolf <br1@einfach.org> SVN-Revision: 46651
* ar71xx: add support for Onion OmegaJohn Crispin2015-07-241-0/+84
| | | | | | | | | | | | This patch adds support for the Onion Omega. https://onion.io/omega Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: Boken Lin <bl@onion.io> Tested-by: Jacky Huang <huangfangcheng@163.com> SVN-Revision: 46458
* ar71xx: Add support for AP147-010 reference boardJohn Crispin2015-07-241-0/+125
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46457
* ar71xx: remove the use of the obsolete IRQF_DISABLED flag in the NAND flash ↵Felix Fietkau2015-07-201-1/+1
| | | | | | | | driver (fixes #20125) Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 46433
* Revert "ar71xx: Add support for Cisco-Linksys WAP4410N" (r46250)Felix Fietkau2015-07-191-285/+0
| | | | | | | | The commit is incomplete, it does not even build the mach-* file This reverts commit 6e6adcf7a197b1802cb728ddcccf05f890ca0574 SVN-Revision: 46425
* ar71xx: add support for the devolo dLAN pro 1200+ WiFi acJohn Crispin2015-07-141-0/+189
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> SVN-Revision: 46342
* ar71xx: add support for the devolo dLAN pro 500 Wireless+John Crispin2015-07-141-0/+203
| | | | | | Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de> SVN-Revision: 46338
* ar71xx: compex wpe72 add space to include statementJohn Crispin2015-07-091-1/+1
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 46284
* ar71xx: compex wpj531 register usb supportJohn Crispin2015-07-091-0/+1
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 46283
* ar71xx: compex wpj531 fix setting mac address on ethernetJohn Crispin2015-07-091-6/+5
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 46282
* ar71xx: compex wpj531 fix ethernet registrationJohn Crispin2015-07-091-2/+2
| | | | | | | | | | | In fb6f62e97733312053ab593fcf68eea47a21169e several settings are set on the ethernet device, but they are not working. Fix Ethernet by setting the right values. Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 46281
* ar71xx: ag71xx remove IRQF_DISABLEDJohn Crispin2015-07-091-1/+1
| | | | | | | | | | no-op since 2.6.35 removed in Kernel 4.1 see https://lwn.net/Articles/380931/ Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 46280
* ar71xx: Add support for Cisco-Linksys WAP4410NJohn Crispin2015-07-071-0/+285
| | | | | | | | | | This patch adds support for the Cisco WAP4410N, an access point that uses the AR9132 SoC. Web upgrades from stock are not yet possible, UART access required for the initial flash. Signed-off-by: Ryan A Young <rayoung@utexas.edu> SVN-Revision: 46250
* ar71xx: add support for D-Link DIR-615 rev. Ix boardJohn Crispin2015-07-071-0/+133
| | | | | | | | Based on trunk r46212. Signed-off-by: Jaehoon You <teslamint@gmail.com> SVN-Revision: 46248
* ar71xx: Use *_eth_cfg helper for Open Mesh MR900 boardsJohn Crispin2015-07-071-20/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 46241
* ar71xx: Add Support for the Bitmain Antminer S3John Crispin2015-07-071-0/+98
| | | | | | | | | | This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s3 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46236
* ar71xx: allow pci calibration fixup to work with ar9344John Crispin2015-07-071-0/+3
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 46235
* ar71xx: add support for ap143Felix Fietkau2015-07-071-0/+142
| | | | | | Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> SVN-Revision: 46208
* ar71xx: rework patch for qca953x/956xFelix Fietkau2015-07-071-2/+16
| | | | | | | | | | | | | | | | | | | Patch cherry-picked from the following location: https://www.codeaurora.org/cgit/quic/qsdk/oss/system/openwrt/commit/?h=release/coconut_ioe4531_2.0&id=5c357bf6c763e4140dddcc9a3bc5f005525a9c0e Changelist, - add more register defines - add EHCI support - fix GPIO pin count to 18 - fix chained irq disabled - fix GMAC0/GMAC1 initial - fix WMAC irq number to 47 - merge the changes of dev-eth.c from the patch to file. Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 46207
* ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link ↵Felix Fietkau2015-07-072-0/+13
| | | | | | | | | | | | TL-WR841N/ND v9, Compex WPJ531) The initialization routines for these boards were relying on some (wrong) defaults for the QCA953x ethernet. Make these defaults explicit to prevent breaking them when the QCA953x defaults are fixed. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 46206
* ar71xx: add kernel support for EnGenius EPG5000.John Crispin2015-06-181-0/+178
| | | | | | Signed-off-by: Christian Beier <cb@shoutrlabs.com> SVN-Revision: 46047
* ar71xx: add support for TL-WR720N-v4.John Crispin2015-06-181-2/+1
| | | | | | | | | | The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch were tested by "Wong min <alpha080@gmail.com>". Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 46046
* ar71xx: add support for compex wpj531John Crispin2015-06-181-0/+136
| | | | | | | | | | | tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize erase 0x9f680000 +1 cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 46045
* ar71xx: Add Support for the Bitmain Antminer S1John Crispin2015-06-181-0/+98
| | | | | | | | | | | This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: James Hilliard <james.hilliard1@gmail.com> SVN-Revision: 46044
* ar71xx: ar934x-nfc: allow ECC to be configured in software BCH modeFelix Fietkau2015-06-182-0/+5
| | | | | | | | | Some devices ship with NAND images that use BCH ECC. Let the driver know about that ECC mode so that it can be selected by machine files. Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> SVN-Revision: 46022
* ar71xx: return limit as number of processed frames when re-scheduling NAPI pollFelix Fietkau2015-06-141-1/+1
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 45971
* ar8216: Fix problem with AR8337 MAC swap handlingFelix Fietkau2015-06-144-0/+4
| | | | | | | | | | | | | | | | | | | | | AR8337 supports a configuration bit to swap MAC0 and MAC6. Currently this is set in general if an AR8337 is detected and causes issues with devices using an AR8334 (internally an AR8337, just less chip pins). And it might even cause issues with AR8337-based devices with different board designs. Swapping the MAC's however isn't needed for AR8337 in general. It's just needed in case of certain board designs (affected devices seem to be based on Atheros reference board AP135/136-010). Therefore this configuration bit should be moved to platform data. The patch includes the needed changes to the device initialization code of affected devices. Hopefully I didn't miss any .. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> SVN-Revision: 45970
* ar71xx: fix 100/10mbps ethernet link issues on mynet range extenderFelix Fietkau2015-06-141-0/+20
| | | | | | | | | | | | | | | | | | The mynet range extender hardware is suffering from ethernet link loss when booting with a recent openwrt image. This only happens on 100mbps links, with 1Gbps speed the link was fine. The cause of the problem is that the AR8035 PHY (aka F1E) requires turning on and off the special TX delay setting depending on the speed of the link. The 10mbps mode only needed the proper pll value, which was extracted from the vendor code. Reported-by: Pascal Paradis Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> SVN-Revision: 45954
* ar71xx: Add support for the Meraki MR12 & MR16John Crispin2015-05-232-0/+233
| | | | | | | | | | This patch is to add support for the Meraki MR12 and MR16 Access Points. Currently everything is working, minus the 2nd NIC interface on the MR12 which is built into the SoC. Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com> SVN-Revision: 45726
* ar71xx: add status led found on ew-dorin boardsLuka Perkov2015-05-101-1/+7
| | | | | | Signed-off-by: Catrinel Catrinescu <cc@80211.de> SVN-Revision: 45656
* ar71xx: do general formatting on wnr2000-v4Felix Fietkau2015-05-081-43/+52
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45640
* ar71xx: fix spelling, add copyright on wnr2000-v4Felix Fietkau2015-05-081-2/+3
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45639
* ar71xx: add support for Green WAN LED on wnr2000-v4Felix Fietkau2015-05-081-0/+4
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45638
* ar71xx: add support for green LAN LEDS for wnr2000-v4Felix Fietkau2015-05-081-8/+40
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45637
* ar71xx: fix amber WAN LED setting for wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45636
* ar71xx: make WLAN button RFKILL on wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | | | | Users will now be provided with the inherent wifi toggle functionality of /etc/rc.button/rfkill Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45635
* ar71xx: set all buttons to be active_low on wnr2000-v4Felix Fietkau2015-05-081-0/+3
| | | | | | | | | Originally pressing a button would trigger a release state and vice-versa, as observed from hotplug.d. Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45634
* ar71xx: fix ethernet on wnr2000-v4Felix Fietkau2015-05-081-22/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Most people report broken ethernet with upstream. Last year, user "franz.flasch" authored a working mach-file. His patch is outdated so I modernized it. Original patch and user commentary on page 1: https://forum.openwrt.org/viewtopic.php?pid=260861#p260861 I have figured out what the critical differences are between the two that caused upstream ethernet to break. 1) Both ath79_init_mac() functions calls must be invocated before any GMAC init 2) must init GMAC0 before GMAC1 That was enough to get upstream to function, but I wanted to enjoy my confidence having tested franz's patch for a week sucessfully, so I put his whole function in, which only features more differences in order of function calls. An expert should consider these changes, which could pose potential bugs/issues: 1) No longer using the flag AR934X_ETH_CFG_SW_PHY_SWAP in the ath79_setup_ar934x_eth_cfg() call. 2) Possible consequence of no longer explicitly setting ethernet duplex/speed. Review: With this patch, my ethernet and wireless works. Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45633
* ar71xx: use a common naming scheme for LEDS on wnr2000-v4Felix Fietkau2015-05-081-9/+9
| | | | | | | | | It is common that the router provider be used rather than product name. One can see this in target/linux/ar71xx/base-files/etc/uci-defaults/01_leds Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45630
* ar71xx: fix leds and gpio on wpj344Luka Perkov2015-04-291-15/+13
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45589
* ar71xx: add support for compex wpj344Luka Perkov2015-04-201-0/+177
| | | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45527
* ar71xx: Increase RXD/RDV to 2 on OM5P-ANFelix Fietkau2015-04-201-3/+2
| | | | | | | | | | It was reported that OM5P-AN needs not only a delay setting of 1 for RXD/RDV but 2. These was found when testing with a NetGear GS752TP POE switch with a cable length of 50ft and 250ft. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45524
* ar71xx: add a helper function to set RXDV/RXD of ETH_CFG on AR934xFelix Fietkau2015-04-202-0/+27
| | | | | | | | | | | | | | | The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared by the function ath79_setup_ar934x_eth_cfg. Clearing these in the ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they rely on the preset value by the bootloader. Instead another function is introduced which also works on ETH_CFG on AR934x. It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on machines which require special settings. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45523
* ar71xx: Remove TX/RX delay from pll_1000 for OM5P-ANFelix Fietkau2015-04-201-1/+1
| | | | | | | | | | The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY. Othwise the throughput in gigabit mode is heavily reduced. Signed-off-by: Sven Eckelmann <sven@open-mesh.org> SVN-Revision: 45521
* ar71xx: fix ethernet packet loss issues on OM5P-ANJohn Crispin2015-04-141-1/+21
| | | | | | | | | | | | | | | The OM5P-AN boards are suffering from ethernet packet loss when booting with some active POE setups or when switching to Fast Ethernet when previously booted with Gigabit ethernet attached. The cause of the problem is that the AR8035 PHYs requires special register settings to work reliably on these boards. Enable the RGMII TX, RX delays and disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV delay in the ETH_CFG register to fix the issue. Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 45438
* ar71xx: add initial support for RB911G-5HPacDGabor Juhos2015-04-071-0/+236
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45299
* ar71xx: routerboot: export extended wlan data via sysfsGabor Juhos2015-04-071-0/+58
| | | | | | | | Export the data to make it accessible from user-space. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45298
* ar71xx: routerboot: add support for extended radio dataGabor Juhos2015-04-072-7/+64
| | | | | | | | | | | | | On newer Mikrotik boards, the radio calibration data is stored differently and uses LZO compression instead of RLE. Update the RouterBOOT helper code to support the new format. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45297
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 22:38:32 +0000