aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files
Commit message (Collapse)AuthorAgeFilesLines
* ar71xx: Unify ath10k calibration data loadingJohn Crispin2015-07-072-87/+49
| | | | | | | | | | | | | Currently one board uses the "proper" way of providing firmware with the name ath10k/cal-pci-<pci address>.bin, whereas other boards patch board.bin template in preinit and rely on a custom ath10k patch to use calibration data from the template. This patch makes all boards use the first method. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 46244
* ar71xx: Add Support for the Bitmain Antminer S3John Crispin2015-07-075-1/+13
| | | | | | | | | | This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s3 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46236
* ar71xx: add support for ubnt rocket-m tiJohn Crispin2015-07-075-0/+17
| | | | | | | | | | | rocket-m titanium is a device based on ar9344 with 802.11af poe. It doesn't use the SoC wifi, instead it's using an ar9280 connected to the pci bus. The gps version of the rocket-m ti is working, but gps is untested. The gps is connected to the first serial port. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 46234
* ar71xx: Enable sysupgrade on the Bitmain Antminer S1John Crispin2015-07-071-0/+1
| | | | | | | | This patch enables sysupgrade for the Bitmain Antminer S1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> SVN-Revision: 46228
* ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.John Crispin2015-07-071-2/+2
| | | | | | | | The designated blue WAN port on both devices has index 5, not 1. Signed-off-by: Christian Beier <cb@shoutrlabs.com> SVN-Revision: 46227
* ar71xx: add LED defaults for the EnGenius EPG5000John Crispin2015-07-071-0/+5
| | | | | | | | NB that wlan5g is phy0tpt and wlan2g phy1tpt. Signed-off-by: Christian Beier <cb@shoutrlabs.com> SVN-Revision: 46226
* ar71xx: add support for ap143Felix Fietkau2015-07-072-0/+4
| | | | | | Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> SVN-Revision: 46208
* ar71xx: update preinit script for new ath10k firmwareFelix Fietkau2015-07-061-2/+2
| | | | | | | | | Update firmware name and md5sum. MAC-address location remains unchanged from previous version. Signed-off-by: Matti Laakso <malaakso@elisanet.fi> SVN-Revision: 46196
* ar71xx: add user-space support for EnGenius EPG5000.John Crispin2015-06-184-1/+9
| | | | | | Signed-off-by: Christian Beier <cb@shoutrlabs.com> SVN-Revision: 46048
* ar71xx: add support for TL-WR720N-v4.John Crispin2015-06-181-1/+1
| | | | | | | | | | The hardware should be almost the same as TL-WR720N-v3. WiFi and LAN networks were tested by "Lo Yuk Fai <loyukfai@gmail.com>". Failsafe and slider switch were tested by "Wong min <alpha080@gmail.com>". Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> SVN-Revision: 46046
* ar71xx: add support for compex wpj531John Crispin2015-06-184-0/+11
| | | | | | | | | | | tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize erase 0x9f680000 +1 cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 46045
* ar71xx: Add Support for the Bitmain Antminer S1John Crispin2015-06-184-0/+12
| | | | | | | | | | | This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s1 Signed-off-by: L. D. Pinney <ldpinney@gmail.com> Acked-by: James Hilliard <james.hilliard1@gmail.com> SVN-Revision: 46044
* ar71xx: fix mac offset in firmware fileFelix Fietkau2015-06-141-1/+1
| | | | | | | | | In new firmware-4.bin (for ath10k) mac offset is 0x114 (276), not 0x118 (280). This also closes #19751, bug introduced in #45624 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 45958
* ar71xx: fix AR71XX_MODEL for TP-Link TL-WA830RE v1John Crispin2015-06-051-0/+4
| | | | | | | | | The v1 identifies as v10 internally. As there is no TL-WA830RE v10, add a workaround to avoid confusing users. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 45903
* ar71xx: Add support for the Meraki MR12 & MR16John Crispin2015-05-235-0/+32
| | | | | | | | | | This patch is to add support for the Meraki MR12 and MR16 Access Points. Currently everything is working, minus the 2nd NIC interface on the MR12 which is built into the SoC. Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com> SVN-Revision: 45726
* ar71xx: add platform_pre_upgrade for sysupgradeFelix Fietkau2015-05-101-0/+13
| | | | | | Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 45667
* ar71xx: add status led found on ew-dorin boardsLuka Perkov2015-05-101-0/+3
| | | | | | Signed-off-by: Catrinel Catrinescu <cc@80211.de> SVN-Revision: 45656
* ar71xx: track the correct WAN interface on wnr2000-v4Felix Fietkau2015-05-081-1/+1
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45632
* ar71xx: fix LAN portmasks on wnr2000-v4Felix Fietkau2015-05-081-4/+4
| | | | | | Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45631
* ar71xx: use a common naming scheme for LEDS on wnr2000-v4Felix Fietkau2015-05-081-7/+7
| | | | | | | | | It is common that the router provider be used rather than product name. One can see this in target/linux/ar71xx/base-files/etc/uci-defaults/01_leds Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com> SVN-Revision: 45630
* ar71xx: fix 82_patch_ath10kFelix Fietkau2015-05-081-2/+2
| | | | | | | | It has been broken since the new ath10k firmware introduced in r44656. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> SVN-Revision: 45624
* ar71xx: fix sysupgrade for compex-wpj344Luka Perkov2015-04-291-1/+1
| | | | | | | | Moved board to the right magic case. Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 45588
* Add support for Ubiquiti Rocket M XW devicesJohn Crispin2015-04-215-1/+7
| | | | | | | | | This patch adds support for the XW version of the Rocket M series devices manufactured by Ubiquiti, based on the Atheros AR9342 SoC. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 45553
* ar71xx: add support for compex wpj344Luka Perkov2015-04-204-0/+14
| | | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 45527
* ar71xx: enable LEDs on Hornet-UB X2John Crispin2015-04-092-2/+4
| | | | | | | | | | | None of the LEDs are enabled by default on the Hornet-UB X2 board (the 16/64MB version of the Hornet-UB), because it uses a different board-name ("hornet-ub-x2"); but hornet-ub and hornet-ub-x2 boards are equivalent WRT their LEDs. SIgned-off-by: Joshua Judson Rosen <jrosen@harvestai.com> SVN-Revision: 45328
* ar71xx: add user-space support for RB911G-5HPacDGabor Juhos2015-04-074-0/+50
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 45300
* ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMACJohn Crispin2015-03-291-9/+19
| | | | | | | | | | | | | | | | | | | | | | | | | There were a few issues with the existing code to detect the model string: * Always using the string starting with byte 56 would cut off the W of WNDR when the ID starts with 29763654+16+64 instead of 29763654+16+128 * The string contained garbage after the zero byte instead of cutting it off after the zero (which wasn't always visible using busybox tools, but could confuse other scripts) Tested on a WNDR3700v1 and a WNDR3700v2 using the new 29763654+16+64 ID in the ART. Furthermore, tested against ART dumps of a WNDR3700v2 using the old $'\xff...' value and a WNDR3800. The [ -z "$model" ] check was dropped as there is no way to actually hit this unless no ART partition is found at all. The awk command was carefully crafted to work both with gawk and the (horribly broken) busybox awk. Fixes #18992. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 45140
* ar71xx: enable sysupgrade for the OpenMesh OM5P-ANJohn Crispin2015-03-172-2/+5
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 44863
* ar71xx: add user-space support for the OpenMesh OM5P-ANJohn Crispin2015-03-173-2/+7
| | | | | | Signed-off-by: Sven Eckelmann <sven@open-mesh.com> SVN-Revision: 44862
* ar71xx: detect GL.iNet modelJohn Crispin2015-03-171-0/+14
| | | | | | | | | There are two versions of the GL.iNet, the 6408A and the 6416A. The only difference is the flash size. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 44860
* ar71xx: fix switched WLAN LEDs on TP-LINK Archer C5/C7John Crispin2015-03-111-2/+8
| | | | | | | | ath10k is loaded before ath9k, so the 5GHz adapter becomes phy0. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 44659
* ar71xx: Fix board detection for the TP-LINK TL-MR13U.John Crispin2015-03-101-1/+1
| | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> SVN-Revision: 44646
* ar71xx: add support for compex wpj558Luka Perkov2015-03-064-1/+15
| | | | | | | | | | | | OpenWrt can be flashed with following uboot commands: tftpboot 0x80500000 openwrt-ar71xx-generic-wpj558-16M-squashfs-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44620
* ar71xx: TL-WA7210n v2 supportJohn Crispin2015-02-244-0/+17
| | | | | | | | | | This patch adds support for TP-Link TL-WA7210n[0] [0] http://www.tplink.com/en/products/details/?model=TL-WA7210N Signed-off-by: Hendrik Frenzel <hfrenzel@scunc.net> SVN-Revision: 44526
* ar71xx: fix 82_patch_ath10kJo-Philipp Wich2015-02-171-1/+7
| | | | | | | | | | | | The firware md5sum check never worked due to missing dollar signs. Also suppress `md5sum: can't open '/lib/firmware/ath10k/QCA988X/hw2.0/firmware-3.bin'` error on any board not using ath10k. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 44486
* ar71xx: Add user-space support for TP-Link MR12U v1John Crispin2015-02-134-0/+9
| | | | | | | | This patch adds user-space support for the TL-MR12U board based on the mr13u patches. Signed-off-by: Daniel Petre <daniel.petre@gmail.com> SVN-Revision: 44426
* ar71xx: ZyXEL NBG6716 led/buttons cleanupJohn Crispin2015-02-121-2/+2
| | | | | | | | | | ZyXEL NBG6716 led/buttons cleanup - improper numbered leds - improper named buttons Signed-off-by: Marcin Mikolajczak <gr4ffy at gmail.com> SVN-Revision: 44417
* ar71xx: add mc-mac1200r to do_load_ath10k_board_bin()John Crispin2015-02-101-0/+11
| | | | | | | | | | This patch adds the mc-mac1200r target to do_load_ath10k_board_bin() in target/linux/ar71xx/base-files/lib/preinit/81_load_ath10k_board_bin to load the ath10k radio MAC address from the EEPROM in MERCURY MAC1200R devices Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 44375
* ar71xx: Add support for MERCURY MAC1200RJohn Crispin2015-02-095-0/+16
| | | | | | | | | This patch adds support for MERCURY MAC1200R, a dual band 802.11bgn + 802.11ac router based on the AR9344, with QCA988x ath10k radio and 5 Fast Ethernet ports Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net> SVN-Revision: 44359
* ar71xx: fix nbg6716 power and usb ledJohn Crispin2015-02-091-1/+1
| | | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> Signed-off-by: Marcin Mikolajczak <gr4ffy@gmail.com> SVN-Revision: 44358
* ar71xx: uci-defaults: add el-mini to appropriate groupLuka Perkov2015-02-071-4/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44307
* targets: base-files: diag.sh does not need to be executableLuka Perkov2015-02-071-0/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44305
* targets: files in uci-defaults do not need to be executablesLuka Perkov2015-02-076-0/+0
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 44304
* ar71xx: add support for the TP-LINK TL-WR941ND v5John Crispin2015-02-045-2/+9
| | | | | | | | | This device is very similar to the TL-WR841N v8, only two LED GPIOs are different. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 44255
* at71xx: TP-LINK Archer: add 5GHz led entryJohn Crispin2015-02-041-0/+1
| | | | | | | | Add 5GHz led entry after r44033. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44254
* ar71xx: Revert "added board support for compex wpj558"John Crispin2015-02-024-15/+0
| | | | | | | | This reverts commit f7873071561d82e75ba2dc46433a2982fef8ac6f. Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 44245
* added board support for compex wpj558John Crispin2015-02-024-0/+15
| | | | | | Signed-off-by: Christian Mehlis <christian@m3hlis.de> SVN-Revision: 44237
* ar71xx: add Netgear WNR1000v2/WNR1000v2-VC support (#18633)John Crispin2015-01-306-3/+14
| | | | | | | | | | | The board is already supported by OpenWrt. WNR1000v2/WNR1000v2-VC are pretty much the same as WNR2000v3/WNR612v2, therefore the same initialization code and flash layout is used. Signed-off-by: Ștefan Rusu <saltwaterc@gmail.com> Tested-by: Douglas Fraser <1dsfraser@gmail.com> SVN-Revision: 44221
* ar71xx: add default LED configuration for D-Link DIR-615 rev. C1John Crispin2015-01-281-0/+5
| | | | | | | | | This patch adds an entry in the uci-defaults' led-file to configure the WAN and WLAN LEDs by default. Signed-off-by: Vincent Wiemann <me@bibbl.com> SVN-Revision: 44165
* ar71xx: add support for TP-LINK TL-WR843ND v1John Crispin2015-01-231-0/+3
| | | | | | | | | TP-LINK TL-WR843ND v1 is the same model like wr41, but with Power over Ethernet on wan port. Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> SVN-Revision: 44085
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 08:16:28 +0000