aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ar71xx/base-files
Commit message (Collapse)AuthorAgeFilesLines
* Backport: ar71xx: Fix board detection for the TP-LINK TL-MR13U.John Crispin2015-03-101-1/+1
| | | | | | Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44644 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TL-WA701ND v2John Crispin2015-01-205-0/+11
| | | | | | Signed-off-by: Luigi Tarenga <luigi.tarenga@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@44064 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fix LED definitions for the DRAGINO2 boardFelix Fietkau2015-01-072-0/+9
| | | | | | | | | | | | | | | | This patch fixes LED definitions for the DRAGINO2 board. 1. It renames the Router/USB led to System, as it is now marked "SYS" on the board. 2. It gives control of the LAN and WAN leds and some other GPIOs to Linux. 3. It fixes the active_low property for the LAN and WAN leds. 4. It sets up WLAN, LAN and WAN leds in the UCI defaults. 5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status. Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net> Backport of r42897 git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@43867 3c298f89-4303-0410-b956-a3cf2f4a3e73
* add support for the NC-LINK SMART-300John Crispin2014-09-016-0/+21
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Backport of r42130 git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42393 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add Support for RB2011UiAS-2HnDJohn Crispin2014-09-013-3/+8
| | | | | | Backport of r42317 git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42387 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable sysupgrade for the EnGenius ESR900John Crispin2014-09-011-0/+1
| | | | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> Backport of r42279 git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42380 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx]: add support for the archer c5Imre Kaloz2014-07-237-0/+9
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41814 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix LED configuration for HiWiFi-HC6361.John Crispin2014-07-231-1/+1
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41809 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix WAN MAC setup on dir-825-c1John Crispin2014-07-211-1/+1
| | | | | | | | Changeset 38690 broke the WAN MAC setup. Here's the fix. Signed-off-by: Sebastian Kemper <sebastian_ml <at> gmx.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41795 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machinesJohn Crispin2014-07-217-0/+10
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41788 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable sysupgrade for the OpenMesh OM5PJohn Crispin2014-07-202-3/+10
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41772 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the OpenMesh OM5PJohn Crispin2014-07-203-0/+11
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41770 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add RB91x boards to uci-defaults 02_networkJohn Crispin2014-07-201-0/+4
| | | | | | | | The default case in 02_network is inappropriate for the MikroTik RouterBOARD 91x boards because they do not have a WAN port, so don't bother setting the non-existent eth1 interface as the WAN port. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41767 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add UBNT airGateway supportJohn Crispin2014-07-204-0/+10
| | | | | | | | | | | This patch adds support for the Ubiquiti Networks airGateway. Based in part on code posted by David Hutchison <dhutchison@bluemesh.net> on openwrt-devel: https://lists.openwrt.org/pipermail/openwrt-devel/2013-December/023035.html Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41766 3c298f89-4303-0410-b956-a3cf2f4a3e73
* [ar71xx]: extract and fixup the board.bin on the archerImre Kaloz2014-07-191-0/+13
| | | | | | | | Signed-off-by: Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41757 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the EnGenius EAP300 v2 boardGabor Juhos2014-07-145-0/+14
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41659 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the Tube2H boardGabor Juhos2014-07-145-0/+46
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41650 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the EnGenius ESR900Gabor Juhos2014-07-144-0/+21
| | | | | | | | Signed-off-by: Forest Crossman <cyrozap@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5716/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41641 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for nanostation m xwJohn Crispin2014-07-145-2/+14
| | | | git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41636 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for EnGenius ESR1750Gabor Juhos2014-07-134-0/+14
| | | | | | | | Signed-off-by: Jon Suphammer <jon@suphammer.net> Patchwork: http://patchwork.openwrt.org/patch/5840/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41625 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for GL.iNet v1Gabor Juhos2014-07-136-0/+14
| | | | | | | | | | | | | Patch is based on http://patchwork.openwrt.org/patch/5273/. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr> Signed-off-by: Mark Janssen <mark@sig-io.nl> Signed-off-by: alzhao <alzhao@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5652/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41619 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Support for Mikrotik RB2011UiASGabor Juhos2014-07-133-1/+6
| | | | | | | | | | | | | | | | | | | | | The RB2011UiAS is almost exactly the same as the RB2011UAS, which is already supported. Hardware-wise, it adds a passive power injector on Eth10. Software-wise, Routerboot passes a different board name on the kernel command line. Hence the need for a patch. Not yet working: * touchscreen: doesn't work on RB2011UAS either. The touchscreen itself seems to be driven by an ADS7843-compatible IC, but figuring out which GPIO pins it's connected to is work for the future. * control of power injector: remains off. Probably also GPIO-controlled. Signed-off-by: Soren Harward <stharward@gmail.com> Patchwork: http://patchwork.openwrt.org/patch/5841/ [juhosg: rename and refresh the kernel patch] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41617 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for TP-LINK TL-WA860RE v1John Crispin2014-07-134-0/+12
| | | | | | | | | | | | | | | | New router/repeater from TP-LINK - CPU: Atheros AR9341-DL3A (AP123) - Flash: 4MB - Ram: 32MB Similar to TL-WA850RE. Changes: rename file after r41596 Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41598 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: added support for TL-WA830RE V2John Crispin2014-07-135-0/+11
| | | | | | | | Corrected patch ath79 insted of auth79. Sorry. Signed-off-by: Fredrik Jonson <fredrik@famjonson.se> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41596 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: nbg6716: extract ath10k wifi board.binJohn Crispin2014-07-101-0/+23
| | | | | | | | | | With help of this script the ath10k board.bin settings are loaded from flash and saved to the ath10k firmware directory. The driver reads it later in the boot process. Signed-off-by: André Valentin <avalentin@marcant.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41562 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Add support for MikroTik RouterBOARD SXT LiteJohn Crispin2014-07-013-0/+12
| | | | | | | | | | | | | | | | This patch adds support for the MikroTik RouterBOARD SXT Lite. The new RB911L series is also supported as a result. v2 of this patch fixes the wmac offset to match what is on the sticker. v3 refreshes the patch against r41148 and defines the power led as the status led in diag.sh v4 refreshes the patch against r41353 and fixes the patch path issue to make git am work correctly v5 selects the kernel config option in the mikrotik profile rather than in the main ar71xx config Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41450 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for EasyLink M150 and M-miniJohn Crispin2014-06-265-0/+29
| | | | | | | | | | | | | v3 refreshes the patch on trunk@41337 This patch adds support for the EasyLink EL-M150 and M-mini http://wiki.openwrt.org/toh/easylink/el-m150 http://wiki.openwrt.org/toh/easylink/el-m-mini Signed-off-by: L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41348 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: nbg6716: Enable procd nand sysupgrageJohn Crispin2014-06-261-0/+1
| | | | | | | | | This enables the procd nand upgrade for ZyXEL NBG 6716. Also the ubi config is cleaned up to match the wndr4300. Signed-off-by: André Valentin <avalentin@marcant.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41346 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: Fixes for 951Ui-2HnD board supportJohn Crispin2014-06-183-0/+10
| | | | | | | | | | | WAN and LAN are swapped the wrong way around. This patch fixes that by adding the 951Ui-2HnD to ar71xx.sh and the relevant entry in 02_network. This patch also defines the ACT LED as the status LED in diag.sh. Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41255 3c298f89-4303-0410-b956-a3cf2f4a3e73
* procd: various cleanups to /lib/upgrade/nand.shJohn Crispin2014-06-161-6/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41222 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add sysupgrade support for wndr4300John Crispin2014-06-111-0/+8
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@41131 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for HiWiFi HC6361 board.John Crispin2014-06-025-0/+13
| | | | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40974 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support to TP-LINK TL-WA730RE v1John Crispin2014-06-021-0/+3
| | | | | | | | | | The TL-WA730RE seems to be almost identical to TL-WA701ND, just that it comes without PoE and a stock-firmware claiming the device to be a "Range Extender". Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40972 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix board detection for TL-WA7510NJohn Crispin2014-06-021-1/+4
| | | | | | | | | Detect TL-WA7510N v1 by the board name as defined in mach-tl-wa901nd.c and add hardware ID to tplink_board_detect Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40971 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: enable sysupgrade on wnr2000-v3John Crispin2014-06-021-0/+1
| | | | | | | | tested, works. Signed-off-by: Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40970 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for dlink dir-615-e1John Crispin2014-06-026-0/+8
| | | | | | | | | | | | Dlink dir-615-e1 can use dir-600-a1's image, but the image can't be uploaded through dlink's normal firmware update web page. Add profile for dir-615-e1 so the generated image can be uploaded through the firmware update web page. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40969 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add sysupgrade support for OpenMesh OM2P-HSv2John Crispin2014-06-022-0/+3
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40963 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for OpenMesh OM2P-HSv2John Crispin2014-06-023-0/+5
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40962 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add sysupgrade support for OpenMesh OM2Pv2John Crispin2014-06-021-0/+2
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40957 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for OpenMesh OM2Pv2John Crispin2014-06-024-0/+6
| | | | | | | | Signed-off-by: Marek Lindner <marek@open-mesh.com> [sven@open-mesh.com: Rebased] Signed-off-by: Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40956 3c298f89-4303-0410-b956-a3cf2f4a3e73
* target/linux/*/base-files/lib/upgrade/platform.sh - wrong check for ARGCJohn Crispin2014-06-021-1/+1
| | | | | | | | | | | | | | | | | | | ARGC is a 'C-ism', but not known/valid in shell-syntax - insert the correct var $# (=number of args) here. under normal conditions this had no impact, but we should at least correct it. the error was observable like this: root@box:~ [ -e "/etc/functions.sh" ] && . /etc/functions.sh root@box:~ [ -e "/lib/functions.sh" ] && . /lib/functions.sh root@box:~ . /lib/upgrade/platform.sh root@box:~ . /lib/upgrade/common.sh root@box:~ platform_check_image /tmp/myfirmware.bin ash: bad number root@box:~ echo $? 0 Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40915 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user-space support for the ZyXEL NBG6716 boardGabor Juhos2014-04-134-0/+21
| | | | | | | | | Signed-off-by: André Valentin <avalentin@marcant.net> Patchwork: http://patchwork.openwrt.org/patch/5101/ [juhosg: use zyxel prefix in LED names] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40500 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add default LED config for WiFi LEDs on the WNDR4300Gabor Juhos2014-04-121-0/+2
| | | | | | Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40476 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: wndr4300: change 'orange' to 'amber' in LED color namesGabor Juhos2014-04-121-0/+4
| | | | | | | | | | | | The hardware manual says amber so change the color part of the LED names to reflect that. Also update the constant names. Based on the the WNDR3700v4 support patch from Ralph Perlich: http://patchwork.openwrt.org/patch/4763/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40473 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: fix typos in TP-Link rssileds definitionGabor Juhos2014-04-121-2/+2
| | | | | | | | Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5109/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40472 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add rssileds for Ubiquiti XM boardsGabor Juhos2014-04-121-0/+9
| | | | | | | | | | | Adds support for the received signal strength indicator LEDs of the Bullet M, Nanostation M and Rocket M devices. Signed-off-by: Felix Kaechele <heffer@fedoraproject.org> Patchwork: http://patchwork.openwrt.org/patch/5108/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40471 3c298f89-4303-0410-b956-a3cf2f4a3e73
* /lib/functions.sh: move rarely used mtd and macaddr related functions to ↵Felix Fietkau2014-04-071-0/+1
| | | | | | | | /lib/functions/system.sh Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40411 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add support for the TP-LINK TL-WR841N/ND v9Felix Fietkau2014-04-075-0/+17
| | | | | | | | | | Everything seems to be working fine. Potential issues: * VLAN port IDs are reversed with regard to the numbers on the case. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40400 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: build image for TL-WDR4300v1 (IL)Gabor Juhos2014-03-271-0/+4
| | | | | | | | | | | The version of TL-WDR4300 sold in Israel comes with a different hardware id. Patch-by: Daniel <daniel@makrotopia.org> Patchwork: http://patchwork.openwrt.org/patch/5001/ Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40038 3c298f89-4303-0410-b956-a3cf2f4a3e73
* ar71xx: add user space support for the Oolite v1 boardGabor Juhos2014-03-274-0/+11
| | | | | | | | | Patch-by: Lars Bøgild Thomsen <lth@cow.dk> Patchwork: http://patchwork.openwrt.org/patch/4922/ [juhosg: use correct board name in uci-defaults/02_network] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@40033 3c298f89-4303-0410-b956-a3cf2f4a3e73
generated by cgit v1.2.3 (git 2.25.1) at 2025-04-12 04:08:59 +0000