aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/apm821xx/patches-4.4
Commit message (Collapse)AuthorAgeFilesLines
* apm821xx: remove 4.4 kernel supportChristian Lamparter2017-04-1222-6788/+0
| | | | Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
* kernel: update kernel 4.4 to 4.4.53Hauke Mehrtens2017-03-121-1/+1
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: update 4.4 kernel to 4.4.42Hauke Mehrtens2017-01-133-6/+6
| | | | | | | Refresh patches on all 4.4 supported platforms. Compile & run tested: lantiq/xrx200 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: bump to 4.4.35Kevin Darbyshire-Bryant2016-11-291-3/+3
| | | | | | | | | | | Refresh patches on all 4.4 supported platforms. 077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch removed as now upstream. Compile & run tested: ar71xx - Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* apm821xx: Add support for the Cisco Meraki MX60/MX60WChris Blake2016-11-211-0/+32
| | | | | | | | | | | | | | | | | | | This patch adds support for the Cisco Meraki MX60/MX60W Security Appliance. Flashing information can be found at https://github.com/riptidewave93/LEDE-MX60 Specs are as follows: AppliedMicro APM82181 SoC at 800MHz 1GiB NAND - Samsung K9K8G08U0D 512MB DDR RAM - 4x Nanya NT5TU128M8GE-AC Atheros AR8327-BL1A Gigabit Ethernet Switch 1x USB 2.0 Port More info can be found at https://wiki.openwrt.org/toh/meraki/mx60 Cc: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* kernel: update kernel 4.4 to version 4.4.32Stijn Tintel2016-11-163-5/+9
| | | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* apm821xx: remove replaced netgear, wndr4700-usb dwc2 definitonChristian Lamparter2016-11-121-48/+0
| | | | | | | This special dwc2 device definition for the Netgear WNDR4700 has been replaced by amcc,usb-otg-405ex. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add amcc, usb-otg-405ex devicetree definitionChristian Lamparter2016-11-121-0/+44
| | | | | | | | | | | This patch adds support for the amcc,usb-otg-405ex device which is found in all APM82181 SoCs. Note: The system can't use the generic "snps,dwc2" compatible because of the special ahbcfg configuration. The default GAHBCFG_HBSTLEN_INCR4 of snps,dwc2 can cause a system hang when the USB and SATA is used concurrently. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: update kernel 4.4 to version 4.4.20Álvaro Fernández Rojas2016-09-151-29/+10
| | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on brcm2708 only. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* apm821xx: backport generic HDD led-triggers for WNDR4700 and MBLChristian Lamparter2016-09-081-0/+228
| | | | | | | This patch backports the new generic HDD/SDD led-trigger from 4.8-rc1. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: update kernel 4.4 to version 4.4.19Stijn Tintel2016-08-2321-393/+191
| | | | | | | | Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon and x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* apm821xx: add support for the Netgear Centria N900 WNDR4700/WNDR4720Christian Lamparter2016-07-226-0/+1036
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Netgear Centria N900 WNDR4700/WNDR4720 hardware highlights: CPU: AMCC PowerPC APM82181 Rev. E at 1000 MHz (PLB=166, OPB=83, EBC=83 MHz) Security support, Boot ROM Location NAND wo/ECC 2k page (8 bits) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: AMCC APM82181 Evaluation Board, PCIE0/SATA1, 1*USB OTG DRAM: 256 MB (ECC not enabled, 500 Mb/s, 32-bit, CL3) NAND: 128 MiB (SLC, erase size: 128 KiB, page size: 2048, OOB size: 64) ETH: Atheros AR8327N Gigabit Switch (4 x LAN, 1 x WAN) USB: 2 x 3.0 (Renesas uPD720202K8-711-BAA-A, firmware not included) SATA: 1 x SATA-II 3.5" Hard Drive Bay for HDDs (DesignWare SATA). WLAN1: Atheros AR9380 5GHz 802.11an 3:3x3 WLAN2: Atheros AR9581 2.4GHz 802.11bgn 3:3x3 SDCARD: GL827L SD/MMC/MS Flash Card Reader (on internal dwc2 USB 2.0 host) I2C: GMT G781 (i2c-0 @ 0x4d - lm90 compatible temperature sensor) TC654 (i2c-0 @ 0x1b - Dual PWM fan Speed controller) WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! INFO: Since this device only has a NAND chip. I opted for going with root.squashfs in a UBI volume. There's no squashfs/jffs2 image. This target produces three images. a. netgear factory image This image can be used to flash the Netgear WNDR4700 via the firmware recovery mechanism and the web admin site. The bootloader can be instructed to do a firmware recovery via the # fw_recovery command. It will start a tftp server and listen on 192.168.1.1 (the ipaddr variable in u-boot) for incoming, binary tftp clients. The firmware recovery mechanism is also started if any of the flash content which contains the kernel, device-tree definitions or the (fake)rootfs fails to verify or load. b. sysupgrade.tar image for sysupgrade An sysupgrade will replace the entire current LEDE installation with a newer version. This does include the kernel and the ubi rootfs partition. The configuration can be carried over automatically as well if desired. simply copy the sysupgrade.tar to a the WNDR4700 running LEDE and run: root@lede:~# sysupgrade sysupgrade.tar and let it reboot. Note: The devicetree flash area is NOT updated. Until the devicetree definition is stable, this can lead to all sorts of hardware detection problems! So make sure, if you experience issues: try the fw_recovery. If you are unsure whenever this affects you: test if you can reproduce your issue with the initramfs method. As it will always have up-to-date device-tree definitions. c. initramfs image for TFTP (for development and testing) To use the initramfs method, follow the following steps: 1) Move the "lede-apm821xx-netgear-WNDR4700-initramfs-kernel.bin" file to to the root directory of your TFTP server. 2) rename it to wndr4700.bin 3) On the WNDR4700 - Hit Enter during u-boot and insert: # tftp 400000 wndr4700.bin; run addtty; bootm 400000 - This will boot the LEDE image. Note: The default tftp server is 192.168.1.7, if you want to change it: # setenv serverip 192.168.8.7; Note2: The default address for the WNDR4700 is 192.168.1.1: # setenv ipaddr 192.168.8.8; Note: Connect you tftp server on the last LAN port (not the WAN) Note: The firmware for the USB 3.0 Host chip is not included anymore. Therefore the two USB 3.0 ports will not work without the uPD7070x-firmware package installed. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: lm90 add thermal sensor interface support for device treeChristian Lamparter2016-07-222-0/+453
| | | | | | | | | | | | | | From 912-hwmon-lm90-expose-to-thermal-fw-via-DT.patch: "This patch adds to lm90 temperature sensor the possibility to expose itself as thermal zone device, registered on the thermal framework. The thermal zone is built only if a device tree node describing a thermal zone for this sensor is present inside the lm90 DT node. Otherwise, the driver behavior will be the same." Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: tc654: add driver for Microchip TC654/TC655 PWM fan controllersChristian Lamparter2016-07-221-0/+1037
| | | | | | | | | | | | | | | | | | | This patch adds a hwmon driver for the Microchip TC654 and TC655 Dual SMBus PWM Fan Speed Controllers with Fan Fault detection. The chip is described in the DS2001734C Spec Document from Microchip. It supports: - Shared PWM Fan Drive for two fans - Provides RPM - automatic PWM controller (needs additional NTC/PTC Thermistors.) - Overtemperature alarm (when using NTC/PTC Thermistors) The TC654 is used by the Netgear WNDR47X0 to control its system fan. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add support for the Western Digital MyBook Live SeriesChristian Lamparter2016-07-222-0/+125
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware Highlights: This patch adds support for Western Digital MyBook Live Series: CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz) 32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory Board: Apollo-3G - APM82181 Board, 1*SATA DRAM: 256 MB (2x NT5TU64M16GG-AC) FLASH: 512 kB (SST 39VF040) Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! The MyBook Live Duo additionally features a 1x USB 2.0 host port and can support a second hard-drive. This target produces two images for a target. 1. ext4 image The extracted/raw image can be directly installed on the internal HDD via "dd if=img.ext4 of=/dev/sdX". This can either be done in place with the stock MyBook Live firmware via ssh. Or by removing the HDD and writing the image with a different PC. The the compressed images are useful for sysupgrade. 2. recovery.tar image for TFTP and Serial. extract the recovery.tar to a TFTP server directory. On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert: # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self Where 192.168.1.254 is your TFTP server. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: sata_dwc_460ex: backport fixes and cleanups from 4.7Christian Lamparter2016-07-221-0/+1088
| | | | | | | | | | This patch fixes the sata_dwc_460ex SATA driver which is used by the SATA controllers in the MyBook Live Series and WNDR4700. The code was backported from the upstream kernel. It can be dropped completely on 4.7+. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: dw_dmac: backport fixes and cleanups from 4.7Christian Lamparter2016-07-224-0/+2303
| | | | | | | | | | This patch fixes the dw_dmac dma engine which is used by the SATA controllers in the MyBook Live Series and WNDR4700. The code was backported from the upstream kernel. It can be dropped completely on 4.7+. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* apm821xx: add support for the Cisco Meraki MR24Chris Blake2016-07-222-0/+93
| | | | | | | | | | | | | | | | | | | This patch adds support for the Cisco Meraki MR24 Access point to the apm821xx target. Board: MR24 - Meraki MR24 Cloud Managed Access Point CPU: APM82181 SoC 800 MHz (PLB=200 OPB=100 EBC=100) Flash size: 32MiB RAM Size: 128MiB Wireless: Atheros AR9380 5.0GHz + Atheros AR9380 2.4GHz Ethernet ports: 1x Gigabit Atheros AR8035 WARNING: The serial port needs a TTL/RS-232 v3.3 level converter! For flashing instructions, visit: <https://github.com/riptidewave93/Openwrt-MR24/blob/master/README.md#flashing> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* apm821xx: add support for the apm821xx device targetChris Blake2016-07-223-0/+614
This adds a new target for PowerPC APM82181 and APM82161 (464-based) boards, as well as adds support for the booke-wdt watchdog package. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 13:46:55 +0000