aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* netifd: update to the latest versionFelix Fietkau2020-12-021-3/+3
| | | | | | | | | | | d6bd1047d004 vlandev: dump vlan id in device status e0c838bd06a6 vlandev: support bridge-vlan aliases in the vid config parameter 574dc4a17105 system-dummy: print configured mac address 14f0e8ff928f system-linux: simplify mask check in system_if_apply_settings 524310276f20 system-linux: move device settings handling to device.c 42c48866f1c1 config: parse default mac address from board.json Signed-off-by: Felix Fietkau <nbd@nbd.name>
* base-files: allow setting device and bridge macsJohn Crispin2020-12-022-9/+42
| | | | | | | | | Add code for setting mac addresses inside board.json and rendering them out to uci. On switches we want to have a unique MAC on each port. With 48 port switches that would require 48 device sections in /etc/config/network. Doing so via board.json is easier. Signed-off-by: John Crispin <john@phrozen.org>
* uboot-envtools: add support for the realtek targetJohn Crispin2020-12-021-0/+29
| | | | | | On most boards the MAC is located inside the u-boot-env. Signed-off-by: John Crispin <john@phrozen.org>
* procd: update to git HEADDaniel Golle2020-11-301-3/+3
| | | | | | | | f3c3563 jail: improve seccomp BPF generator f67a66f jail: always call cgroups_free() 4625350 jail: seccomp: improve code readability Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* busybox: add check for capabilities fileDaniel Golle2020-11-302-2/+2
| | | | | | | | | Similar to the previous commit adding a check to the init script of umdns, do a similar change for sysntpd, just to be on the safe side. Inspired-by: 520403cd49 ("umdns: add check for seccomp list") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* umdns: add check for seccomp listJan Pavlinec2020-11-302-2/+2
| | | | | | | | This should fix an issue when user have a router with enabled seccomp and tries to run umdns package which was build with SDK with disabled seccomp support. Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz>
* hostapd: Add cell_density data rates optionNick Lowe2020-11-301-13/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a cell_density option to configure data rates for normal, high and very high cell density wireless deployments. The purpose of using a minimum basic/mandatory data rate that is higher than 6 Mb/s, or 5.5 Mb/s (802.11b compatible), in high cell density environments is to transmit broadcast/multicast data frames using less airtime or to reduce management overheads where significant co-channel interference (CCI) exists and cannot be avoided. Caution: Without careful design and validation, configuration of a too high minimum basic/mandatory data rate can sacrifice connection stability or disrupt the ability to reliably connect and authenticate for little to no capacity benefit. This is because this configuration affects the ability of clients to hear and demodulate management, control and broadcast/multicast data frames. Deployments that have not been specifically designed and validated are usually best suited to use 6, 12 and 24 Mb/s as basic/mandatory data rates. Only usually seek to configure a 12 Mb/s, or 11 Mb/s (802.11b compatible), minimum basic/mandatory rate in high cell density deployments that have been designed and validated for this. For many deployments, the minimum basic/mandatory data rate should not be configured above 12 Mb/s to 18 Mb/s, 24 Mb/s or higher. Such a configuration is only appropriate for use in very high cell density deployment scenarios. A cell_density of Very High (3) should only be used where a deployment has a valid use case and has been designed and validated specifically for this use, nearly always with highly directional antennas - an example would be stadium deployments. For example, with a 24 Mb/s OFDM minimum basic/mandatory data rate, approximately a -73 dBm RSSI is required to decode frames. Many clients will not have roamed elsewhere by the time that they experience -73 dBm and, where they do, they frequently may not hear and be able to demodulate beacon, control or broadcast/multicast data frames causing connectivity issues. There is a myth that disabling lower basic/mandatory data rates will improve roaming and avoid sticky clients. For 802.11n, 802.11ac and 802.11ax clients this is not correct as clients will shift to and use lower MCS rates and not to the 802.11b or 802.11g/802.11a rates that are able to be used as basic/mandatory data rates. There is a myth that disabling lower basic/mandatory data rates will ensure that clients only use higher data rates and that better performance is assured. For 802.11n, 802.11ac and 802.11ax clients this is not correct as clients will shift around and use MCS rates and not the 802.11b or 802.11g/802.11a rates that able to be used as basic/mandatory data rates. Cell Density 0 - Disabled (Default) Setting cell_density to 0 does not configure data rates. This is the default. 1 - Normal Cell Density Setting cell_density to 1 configures the basic/mandatory rates to 6, 12 and 24 Mb/s OFDM rates where legacy_rates is 0. Supported rates lower than the minimum basic/mandatory rate are not offered. Setting cell_density to 1 configures the basic/mandatory rates to the 5.5 and 11 Mb/s DSSS rates where legacy_rates is 1. Supported rates lower than the minimum basic/mandatory rate are not offered. 2 - High Cell Density Setting the cell_density to 2 configures the basic/mandatory rates to the 12 and 24 Mb/s OFDM rates where legacy_rates is 0. Supported rates lower than the minimum basic/mandatory rate are not offered. Setting the cell_density to 2 configures the basic/mandatory rates to the 11 Mb/s DSSS rate where legacy_rates is 1. Supported rates lower than the minimum basic/mandatory rate are not offered. 3 - Very High Cell Density Setting the cell_density to 3 configures the basic/mandatory rates to the 24 Mb/s OFDM rate where legacy_rates is 0. Supported rates lower than the minimum basic/mandatory rate are not offered. Setting the cell_density to 3 only has effect where legacy_rates is 0, else this has the same effect as being configured with a cell_density of 2. Where specified, the basic_rate and supported_rates options continue to override both the cell_density and legacy_rates options. Signed-off-by: Nick Lowe <nick.lowe@gmail.com>
* base-files: fix alias more to properly detect /usr/bin/moreHuangbin Zhan2020-11-281-1/+1
| | | | | | Package more is installed to /usr/bin rather than /bin. Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* ath10k-firmware: remove unused packageÁlvaro Fernández Rojas2020-11-281-182/+0
| | | | | | | All firmwares were added to linux-firmware, so there's no need to keep this package definitions. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct-firmware: switch to linux-firmware board binariesÁlvaro Fernández Rojas2020-11-281-135/+37
| | | | | | | | | | Instead of duplicating board firmware binaries, which are exactly the same as the ones from linux-firmware, add dependencies and remove duplicated downloads. Runtime-tested on ath79 (TP-Link Archer C7 v2) and ipq806x (Netgear R7800). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* linux-firmware: ath10k: add board firmware packagesÁlvaro Fernández Rojas2020-11-282-16/+46
| | | | | | | Split ath10k firmwares into board and firmware packages. This way we can add dependencies to ath10k-ct firmware packages. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* libnetfilter-cthelper: removeRosen Penev2020-11-281-72/+0
| | | | | | | conntrack was moved to packages where this is used. This will be moved there as well. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libnetfilter-cttimeout: removeRosen Penev2020-11-281-72/+0
| | | | | | | conntrack was moved to packages where this is used. This will be moved there as well. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libnetfilter-log: removeRosen Penev2020-11-289-459/+0
| | | | | | | ulogd in the packages feed is the only user of this. It will be moved there. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libnetfilter-queue: removeRosen Penev2020-11-282-184/+0
| | | | | | | Nothing in base uses this. This will be moved to packages where it is used. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: sfc,sfc-falcon: fix kernel config symbolsPetr Štetiar2020-11-271-5/+5
| | | | | | | | I've just noticed on i.mx6 target, that there are missing kernel symbols so I'm fixing it. Fixes: 3c5d70ad26ed ("kernel: add module support Solarflare network adapter") Signed-off-by: Petr Štetiar <ynezz@true.cz>
* libroxml: removeRosen Penev2020-11-271-48/+0
| | | | | | This will be moved to the packages feed as nothing here uses it. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* base-files: merge /etc/passwd on rw-rootfsImran Khan2020-11-272-4/+6
| | | | | | | | | Support installations without root-overlayfs (and hence without /rom) when migrating user accounts. Signed-off-by: Imran Khan <gururug@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [simplified patch, bumped PKG_RELEASE, cleaned message]
* umdns: update seccomp filter rulesDaniel Golle2020-11-272-1/+2
| | | | | | Add 'writev' syscall to list of allowed syscalls. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: update to git HEADDaniel Golle2020-11-271-3/+3
| | | | | | | | | | | | | | | | 3019f50 jail: leak less memory 7e01453 jail: fix segfault on missing name and refactor 5abee8f jail: fix and simplify userns uid/gid maps from OCI 4ba72ec jail: relax /etc/resolv.conf creation db5ef86 jail: don't use NULL arguments for mount syscall 19ac9df jail: don't fail if can't mount-bind /etc/resolv.conf acf36f2 jail: seteuid before clone(CLONE_NEWUSER) e40828f jail: fix typo in usage output b87984b jail: don't attempt to mount /sys with noatime b275b11 jail: enter existing cgroups namespace if given 31e0a46 jail: properly initialize timens_fd Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libiconv-full: Makefile polishingRosen Penev2020-11-261-9/+2
| | | | | | | | | | | | Added PKG_INSTALL to avoid using an explicit define Build/Compile Added PKG_BUILD_PARALLEL for faster compilation. Removed TARGET_CLAFGS. They are no longer necessary. fPIC is default now. So is gnu99. -DUSE_DOS is a hack to include old and mostly unused conversions. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* libiconv-full: update to version 1.16Josef Schlehofer2020-11-266-29530/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | - Removed following patches: 100-strip_charsets.patch - makes the full variant slim. 101-autotools.patch - this one fails to apply because it was backported from newer versions for 1.11.1. 103-configure_ac_fix.patch - backported from newer versions 200-work-with-libtool2.patch - is not needed anymore, it is done differently in upstream 300-fortify-source-compat.patch - these files are not there anymore - TVHeadend requires working iconv library e.g. transliteration to ASCII and this does not work with libiconv-full currently. There is a simple test, which requires to install iconv package. Before applying this update: root@turris:/# echo ŽluťoučkýKůň | iconv -t ASCII//TRANSLIT//IGNORE luoukK After applying this update: root@turris:~# echo ŽluťoučkýKůň | iconv -t ASCII//TRANSLIT//IGNORE Zlutouck'yKun - Makefile changes: Use HTTPS for their website Fixed deprecated SPDX License Identifier Move PKG_MAINTAINER above PKG_LICENSE Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> Tested-by: Rosen Penev <rosenp@gmail.com> [malta]
* nettle: fix build on macos xcode 12Kevin Darbyshire-Bryant2020-11-261-0/+34
| | | | | | | | | | | compiler warns that exit() isn't defined so checks for build system compiler fail. include <stdlib.h> to define exit() Tested under macos Catalina & Big Sur Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* opkg: cleanup man pages and md5 fixupPaul Spooren2020-11-251-3/+3
| | | | | | | 66f458d fix md5sum calculation 02eaf9c man: remove obsolete manual pages Signed-off-by: Paul Spooren <mail@aparcar.org>
* hostapd: fix "sh: out of range" errorsStijn Tintel2020-11-261-0/+7
| | | | | | | | | | | | | | Several variables in hostapd.sh can be used uninitialized in numerical comparisons, causing errors in logread: netifd: radio24 (1668): sh: out of range Set defaults for those variables to silence those errors. Fixes: b518f07d4b8a ("hostapd: remove ieee80211v option") Fixes: cc80cf53c50d ("hostapd: add FTM responder support") Fixes: e66bd0eb0469 ("hostapd: make rrm report independent of ieee80211k setting") Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* lldpd: bump to 1.0.7Stijn Tintel2020-11-261-3/+3
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ath10k-ct: switch to driver version 5.8Stijn Tintel2020-11-267-108/+98
| | | | | | | | | | | | | | | | Since we are using mac80211 5.8, let's also switch the ath10k-ct driver to the new 5.8 version. Modify patches so they patch the new ath10k-ct driver version. Adapt 164-ath10k-commit-rates-from-mac80211.patch. Drop upstreamed 205-ath10k-Add-NL80211_EXT_FEATURE_AQL-flag.patch. Drop the other options for CT_KVER from the comment, as it is incorrect and there are too many versions to sum up and maintain there. Runtime-tested on ath79 (D-Link DAP-2695-A1, TP-Link EAP245-v3). Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: add support for Xiaomi Mi Router 4CAtaberk Özen2020-11-252-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for Xiaomi's Mi Router 4C device. Specifications: - CPU: MediaTek MT7628AN (580MHz) - Flash: 16MB - RAM: 64MB DDR2 - 2.4 GHz: IEEE 802.11b/g/n with Integrated LNA and PA - Antennas: 4x external single band antennas - WAN: 1x 10/100M - LAN: 2x 10/100M - LEDs: 2x yellow/blue. Programmable (labelled as power on case) - Non-programmable (shows WAN activity) - Button: Reset How to install: 1- Use OpenWRTInvasion to gain telnet and ftp access. 2- Push openwrt firmware to /tmp/ using ftp. 3- Connect to router using telnet. (IP: 192.168.31.1 - Username: root - No password) 4- Use command "mtd -r write /tmp/firmware.bin OS1" to flash into the router.. 5- It takes around 2 minutes. After that router will restart itself to OpenWrt. Signed-off-by: Ataberk Özen <ataberkozen123@gmail.com> [wrap commit message, bump PKG_RELEASE for uboot-envtools, remove dts-v1 from DTS, fix LED labels] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* busybox: enable find -mmin support by defaultLukas Tribus2020-11-251-1/+1
| | | | | | | | | | | | | | | Enable busybox's find -mmin time support, which is extremely small, however also very useful in scripts: https://github.com/mirror/busybox/commit/72d1a2357d2168f241458e4d6cebb7589ac82f4f Comparing package sizes... Change Local Remote Package +7 229009 229002 busybox Signed-off-by: Lukas Tribus <lukas@ltri.eu> [fix commit message long line and missing size change] Signed-off-by: Paul Spooren <mail@aparcar.org>
* base-files: functions.sh: replace [^...] with [!...] in caseRosen Penev2020-11-251-1/+1
| | | | | | | | | | | | | | | | Strictly speaking, ash does not support it. From https://wiki.ubuntu.com/DashAsBinSh#A.5B.5E.5D Not to be confused by sed's and other program's regular expression syntax. Uses of [^...] in case (parameter/word expansion in general) need to be replaced with [!...]. Found with shellcheck: https://github.com/koalaman/shellcheck/wiki/SC2169 Signed-off-by: Rosen Penev <rosenp@gmail.com> [minor commit title/message adjustments] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for Senao Engenius EAP300 v2Michael Pratt2020-11-252-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FCC ID: A8J-EAP300A Engenius EAP300 v2 is an indoor wireless access point with a 100/10-BaseT ethernet port, 2.4 GHz wireless, internal antennas, and 802.3af PoE. **Specification:** - AR9341 - 40 MHz reference clock - 16 MB FLASH MX25L12845EMI-10G - 64 MB RAM - UART at J1 (populated) - Ethernet port with POE - internal antennas - 3 LEDs, 1 button (power, eth, wlan) (reset) **MAC addresses:** phy0 *:d3 art 0x1002 (label) eth0 *:d4 art 0x0/0x6 **Installation:** - if you get Failsafe Mode from failed flash: only use it to flash Original firmware from Engenius or risk kernel loop or halt which requires serial cable Method 1: Firmware upgrade page: OEM webpage at 192.168.1.1 username and password "admin" Navigate to "Firmware" page from left pane Click Browse and select the factory.bin image Upload and verify checksum Click Continue to confirm and wait 3 minutes Method 2: Serial to load Failsafe webpage: After connecting to serial console and rebooting... Interrupt uboot with any key pressed rapidly execute `run failsafe_boot` OR `bootm 0x9fdf0000` wait a minute connect to ethernet and navigate to "192.168.1.1/index.htm" Select the factory.bin image and upload wait about 3 minutes **Return to OEM:** If you have a serial cable, see Serial Failsafe instructions *DISCLAIMER* The Failsafe image is unique to Engenius boards. If the failsafe image is missing or damaged this will not work DO NOT downgrade to ar71xx this way, can cause kernel loop or halt The easiest way to return to the OEM software is the Failsafe image If you dont have a serial cable, you can ssh into openwrt and run `mtd -r erase fakeroot` Wait 3 minutes connect to ethernet and navigate to 192.168.1.1/index.htm select OEM firmware image from Engenius and click upgrade **TFTP recovery** (unstable / not reliable): rename initramfs to 'vmlinux-art-ramdisk' make available on TFTP server at 192.168.1.101 power board while holding or pressing reset button repeatedly NOTE: for some Engenius boards TFTP is not reliable try setting MTU to 600 and try many times **Format of OEM firmware image:** The OEM software of EAP300 v2 is a heavily modified version of Openwrt Kamikaze. One of the many modifications is to the sysupgrade program. Image verification is performed simply by the successful ungzip and untar of the supplied file and name check and header verification of the resulting contents. To form a factory.bin that is accepted by OEM Openwrt build, the kernel and rootfs must have specific names and begin with the respective headers (uImage, squashfs). Then the files must be tarballed and gzipped. The resulting binary is actually a tar.gz file in disguise. This can be verified by using binwalk on the OEM firmware images, ungzipping then untaring. The OEM upgrade script is at /etc/fwupgrade.sh. OKLI kernel loader is required because the OEM software expects the kernel size to be no greater than 1536k and otherwise the factory.bin upgrade procedure would overwrite part of the kernel when writing rootfs. Signed-off-by: Michael Pratt <mcpratt@pm.me> [clarify MAC address section, bump PKG_RELEASE for uboot-envtools] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* libusb-compat: removeRosen Penev2020-11-252-239/+0
| | | | | | | No package in base relies on this library. This library will be moved to packages where it is needed. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* linux-firmware: brcm: use RPI 4B NVRAM fileÁlvaro Fernández Rojas2020-11-252-4/+2
| | | | | | Use the dedicated RPI 4B NVRAM file introduced in 20191215. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* cypress-nvram: add proper package conflictsÁlvaro Fernández Rojas2020-11-251-1/+9
| | | | | | There are linux firmware packages for all RPIs NVRAMs. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* cypress-firmware: add proper package conflictsÁlvaro Fernández Rojas2020-11-251-1/+4
| | | | | | | There are linux firmwares packages for 43362, 43430 and 43455 which shouldn't be installed at the same time as Cypress firmwares. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ath10k-ct-firmware: add conflicts and better providesKarel Kočí2020-11-251-11/+71
| | | | | | | | | | | | | This expands packages to define not only provides but also conflicts. These packages provides same files so they should specify conflicts. Second expansion is that *-ct-htt and *-ct-full-htt firmwares can also provide *-ct variant as that allows explicit dependency on CT variant with various firmware modifications. Signed-off-by: Karel Kočí <karel.koci@nic.cz> [Bump PKG_RELEASE and format PROVIDES/CONFLICTS] Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* exfat: update to 5.10.1Rosen Penev2020-11-241-5/+4
| | | | | | | | | | | | | | | | | | | | | Remove tar hacks and use PKG_BUILD_DIR. Added missing URL. Changelog: d5eb2e1 exfat: remove useless check in exfat_move_file() 8cb2bc3 exfat: use i_blocksize() to get blocksize 4cd0435 exfat: fix misspellings using codespell tool 485d677 exfat: fix use of uninitialized spinlock on error path 03b3db6 exfat: remove 'rwoffset' in exfat_inode_info 90797eb exfat: replace memcpy with structure assignment d144149 exfat: remove useless directory scan in exfat_add_entry() fc67230 exfat: eliminate dead code in exfat_find() 7c25c64 exfat: fix pointer error checking bfea1fb exfat: retain 'VolumeFlags' properly Signed-off-by: Rosen Penev <rosenp@gmail.com>
* opkg: purge package from cache on hash mismatchPaul Spooren2020-11-241-4/+4
| | | | | | | | | | 61b3c62 opkg_verify_integrity: better logging and error conditions f73d42f download: purge cached packages that have incorrect checksum 1c1480e download: factor out the logic for building cache filenames 293b1ce libopkg: factor out checksum and size verification a786e25 download: remove compatibility with old cache naming scheme Signed-off-by: Paul Spooren <mail@aparcar.org>
* tcpdump: patch CVE-2020-8037Jan Pavlinec2020-11-252-1/+48
| | | | | | | | | This PR backports upstream fix for CVE-2020-8037. This fix is only relevant for tcpdump package, tcpdump-mini is not affeted by this issue. Signed-off-by: Jan Pavlinec <jan.pavlinec@nic.cz> [added missing commit description] Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ath10k-ct: update to latest versionÁlvaro Fernández Rojas2020-11-245-22/+22
| | | | | | | | 1d28d17 ath10k-ct: Fix RSSI reporting for wave-1 firmware. 0c2949e ath10k-ct: fwcfg allows configuring dma-burst setting. 13319ff ath10k-ct: stable patches, debugfs crashdump, 5.8 driver Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* uqmi: set plmn only if necessaryMartin Schiller2020-11-242-8/+22
| | | | | | | | | | | | | | | | | Setting the plmn to '0' (auto) will implicitly lead to a (delayed) network re-registration, which could further lead to some timing related issues in the qmi proto handler. On the other hand, if you switch back from manual plmn selection to auto mode you have to set it to '0', because this setting is permanently "saved" in the wwan module. Conclusion: If plmn is configured, check if it's already set euqally in the module. If so, do nothing. Otherwise set it. Signed-off-by: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* treewide: update email address of Tomasz Maciej NowakTomasz Maciej Nowak2020-11-241-2/+2
| | | | | | | | | | Replace my o2.pl email address. I'm still available at the old address. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [rephrase commit title/message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mvebu: add initial support for Globalscale ESPRESSObin-UltraVladimir Vid2020-11-232-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for Globalscale ESPRESSObin-Ultra. Device uses the same Armada-3720 SoC with extended hardware support. - SoC: Armada-3720 - RAM: 1 GB DDR4 - Flash: 4MB SPI NOR (mx25u3235f) + 8 GB eMMC - Ethernet: Topaz 6341 88e6341 (4x GB LAN + 1x WAN with 30W PoE) - WiFI: 2x2 802.11ac Wi-Fi marvell (88w8997 PCIe+USB) - 1x USB 2.0 port - 1x USB 3.0 port - 1x microSD slot - 1x mini-PCIe slot (USB [with nano-sim slot]) - 1x mini-USB debug UART - 1x RTC Clock and battery - 1x reset button - 1x power button - 4x LED (RGBY) - Optional 1x M.2 2280 slot ** Installation ** Copy dtb from build_dir to bin/ and run tftpserver there: $ cp ./build_dir/target-aarch64_cortex-a53_musl/linux-mvebu_cortexa53/ linux-5.4.65/arch/arm64/boot/dts/marvell/armada-3720-espressobin-ultra.dtb bin/targets/mvebu/cortexa53/ $ in.tftpd -L -s bin/targets/mvebu/cortexa53/ Connect to the device UART via microUSB port on the back side and power on the device. Power on the device and hit any key to stop the autoboot. Set serverip (host IP) and ipaddr (any free IP address on the same subnet), e.g: $ setenv serverip 192.168.1.10 # Host $ setenv ipaddr 192.168.1.15 # Device Ping server to confirm network is working: $ ping $serverip Using neta@30000 device host 192.168.1.15 is alive Tftpboot the firmware: $ tftpboot $kernel_addr_r openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-initramfs-kernel.bin $ tftpboot $fdt_addr_r armada-3720-espressobin-ultra.dtb Set the console and boot the image: $ setenv bootargs $console $ booti $kernel_addr_r - $fdt_addr_r Once the initramfs is booted, transfer openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz to /tmp dir on the device. Gunzip and dd the image: $ gunzip /tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img.gz $ dd if=/tmp/openwrt-mvebu-cortexa53-globalscale_espressobin-ultra-squashfs-sdcard.img of=/dev/mmcblk0 && sync Reboot the device. Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
* hostapd: fix patch offsetLeon M. George2020-11-231-1/+1
| | | | | | | Fixes the offset of the patch added in 93bbd998aa696a ("hostapd: enter DFS state if no available channel is found"). Signed-off-by: Leon M. George <leon@georgemail.eu>
* layerscape: enable spi-uart in LS1012A-FRDMPawel Dembicki2020-11-232-1/+14
| | | | | | | | | This patch add missing support of SC16IS740 serial controller, installed on LS1012A-FRDM board. It was required to change RCW bits, because SPI was disabled by default. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* kernel: iio: add fxas21002c driver supportPawel Dembicki2020-11-231-0/+50
| | | | | | This patch adds kernel modules for Freescale FXAS21002C 3-axis gyro driver. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* layerscape: make initramfs kernel fit packedPawel Dembicki2020-11-235-9/+5
| | | | | | | | This will make developing process easier, because dtb will be included into image. Not need to enable initramfs image by default. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* linux-firmware: update to 20201118John Audia2020-11-231-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git log --pretty=oneline --abbrev-commit 20201022..20201118 2ea8667 (tag: 20201118) rtlwifi: v88.2 firmware files for RTL8192CU e850cf3 Merge https://github.com/rjliao-qca/qca-btfw into main 65370db rtw88: RTL8822C: Update firmware to v9.9.4 e371b7c Revert "rtw88: RTL8822C: Update firmware to v9.9.4" 51d2c81 vpdma: Move firmware to ti directory d7a24c9 Merge branch 'master' of https://github.com/shahasit/video-linux-firmware into main 9ee1543 Merge branch 'master' of https://github.com/shahasit/bt-linux-firmware into main 3bcc4c1 amdgpu: update picasso VCN firmware b6b4542 amdgpu: update raven2 VCN firmware 79aa335 amdgpu: update raven VCN firmware c93834e rtw88: RTL8822C: Update firmware to v9.9.4 3ef6c93 rtl_bt: Update RTL8822C BT(USB I/F) FW to 0x099A_281A b503c96 Merge branch 'ath10k-20201023' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/linux-firmware into main 463fdea QCA: Update Bluetooth firmware for QCA6390 8a46c32 qcom : updated venus firmware files for v5.4 d7793e5 QCA : Fixed BT SSR due to command timeout / IO fatal error d842d8c ath11k: QCA6390 hw2.0: add to WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1 8fb1a6e ath11k: QCA6390 hw2.0: add board-2.bin 34cb5fc ath11k: IPQ8074 hw2.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 c0a8efd ath11k: IPQ8074 hw2.0: add board-2.bin ac7f5e9 ath11k: IPQ6018 hw1.0: add to WLAN.HK.2.1.0.1-01238-QCAHKSWPL_SILICONZ-2 2594e51 ath11k: IPQ6018 hw1.0: add board-2.bin d8f10d4 ath10k: QCA6174 hw3.0: add firmware-sdio-6.bin version WLAN.RMH.4.4.1-00077 6652297 ath10k: QCA9984 hw1.0: update firmware-5.bin to 10.4-3.9.0.2-00131 36059aa ath10k: QCA9888 hw2.0: update firmware-5.bin to 10.4-3.9.0.2-00131 1e5629d ath10k: QCA6174 hw3.0: update board-2.bin e315d1a ath10k: QCA6174 hw3.0: update firmware-6.bin to WLAN.RM.4.4.1-00157-QCARMSWPZ-1 Signed-off-by: John Audia <graysky@archlinux.us>
* netifd: update to the latest versionFelix Fietkau2020-11-231-3/+3
| | | | | | | 213748a9bcd9 system-linux: implement full device present state management for force-external devices 3abe1fc87151 system-linux: add retry for adding member devices to a bridge Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: enable the epoll-based event loopRui Salvaterra2020-11-238-8/+8
| | | | | | Hostapd supports epoll() since 2014. Let's enable it for better performance. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 02:32:04 +0000