aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* uboot-mxs: build with mxs generic subtargetKuan-Yi Li2022-12-251-0/+1
| | | | | | | | | | Fix image build fail by using the generic subtarget. Fixes: 64ef920b ("mxs: add generic subtarget") Ref: 40e3f660 ("uboot-fritz4040: build with ipq40xx generic subtarget") Signed-off-by: Kuan-Yi Li <kyli@abysm.org> [ add commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* uboot-kirkwood: build with kirkwood generic subtargetKuan-Yi Li2022-12-251-0/+1
| | | | | | | | | | Fix image build fail by using the generic subtarget. Fixes: cada395a ("kirkwood: add generic subtarget") Ref: 40e3f660 ("uboot-fritz4040: build with ipq40xx generic subtarget") Signed-off-by: Kuan-Yi Li <kyli@abysm.org> [ add commit description ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* sunxi: ensure NanoPi R1 has unique MAC addressJan-Niklas Burfeind2022-12-251-0/+8
| | | | | | | | | | | | | | | | | | | | Ensure the MAC address for all NanoPi R1 boards is assigned uniquely for each board. The vendor ships the device in two variants; one with and one without eMMC; but both without static mac-addresses. In order to assign both board types unique MAC addresses, fall back on the same method used for the NanoPi R2S and R4S in case the EEPROM chip is not present by generating the board MAC from the SD card CID. [0] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R1#Hardware_Spec Similar too and based on: commit b5675f500daf ("rockchip: ensure NanoPi R4S has unique MAC address") Co-authored-by: David Bauer <mail@david-bauer.net> Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* mac80211: Do not build brcmsmac on bcm47xx_legacyHauke Mehrtens2022-12-241-1/+1
| | | | | | | | | brcmsmac needs bcma. bcma is build into the kernel for the other bcm47xx subtargets, but not for the legacy target because it only uses ssb. We could build bcma as a module for bcm47xx_legacy, but none of these old devices uses a wifi card supported by brcsmac. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mt76: update to the latest versionFelix Fietkau2022-12-221-3/+3
| | | | | | | a03ef0aab93e wifi: mt76: mt7921: fix deadlock in mt7921_abort_roc 5b509e80384a wifi: mt76: dma: fix a regression in adding rx buffers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-sunxi: use UUID of bootdev and bootpartJan-Niklas Burfeind2022-12-221-3/+5
| | | | | | | | | | | | | | | | | | | | | | | Several sunxi devices come with multiple mmc devices. On such devices, the mmc device order is unpredictable, so using /dev/mmcblk0p2 as root device doesn't always work, which results in unbootable devices. For the Banana Pi BPI-R3 in the mediatek target, this has been solved by defining aliases for the mmc devices in the DTS. Ideally we would do the same here, but for sunxi-a64 we already use UUID probing, so let's start with that (5f2ff607e286 ("uboot-sunxi: a64: allow booting directly from eMMC")). Since we're building and including u-boot in each supported device image, and this method has been proven to work fine for a64, let's just change the default u-boot env file to do the same. Fixes: #10080 Fixes: e6d9f6fdff ("sunxi: add support for FriendlyARM NanoPi R1") Co-authored-by: Karl Palsson <karlp@etactica.com> Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me> [use UUID in default u-boot env, rewrite commit message] Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* sunxi: remove frequency for NanoPi R1Jan-Niklas Burfeind2022-12-221-2/+1
| | | | | | | The frequency appears as unlisted initial frequency. Removed it as Hauke suggested. Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* arm-trusted-firmware-sunxi: drop CPE IDStijn Tintel2022-12-201-1/+0
| | | | | | The CPE ID is already set in trusted-firmware-a.mk. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* xdp-tools: update to version 1.2.9Daniel Golle2022-12-202-5/+5
| | | | | | | | | | | | | | | | | | | Changes since v1.2.8: 32aaf32 libxdp: Fix incorrect rx_ring_setup_done 6049671 headers: add bpf_endian.h for parsing_helpers.h 2682c1c export-man: Ignore errors when executing git shell command 8afda7a xdp-loader/README: Mention lack of support for HW mode in most cards dc69919 libxdp: fix prog_fd checks for fd >= 0 3d7c22a libxdp: Allow falling back to single-program attachment for loaded programs af00429 libxdp: Fix check in xdp_program__attach_single() 41703d2 libxdp: Make sure to set the the program autoload when loading a program b1fd2e5 test-xdpdump: Only run tshark attribute test on newer versions of tshark 5dfe342 libxdp: Convert xdp-dispatcher to use strict section names 929a22e configure: Try to auto-detect versioned clang binaries 074fcfb libxdp: Check program name when determining if a program is a dispatcher e13a191 Bump TOOLS_VERSION to 1.2.9 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: add mbedtls variantRosen Penev2022-12-1911-12/+10188
| | | | | | | This adds the current WIP mbedtls patches for hostapd. The motivation here is to reduce size. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* mac80211: add ath11k PCI supportRobert Marko2022-12-1920-4/+1718
| | | | | | | | | | | | | | | | | | | | | | ath11k is the upstream driver for Qualcomm 802.11ax radios, both for the internal AHB and PCI based cards. This commit does however only provide PCI support while AHB will follow but its SoC specific so it will require an OpenWrt target first. It differs a bit from ath10k as it requires stuff like QRTR, MHI and QMI helpers. PCI variant requires qrtr-mhi and mhi-bus which backports do provide, however we are dropping those in a patch as they will conflict with support for the AHB variant as that one requires qrtr-smd which in turn requires RPMSG and GLINK and its not feasable to provide those in backports as they are really SoC specific. QRTR and MHI in kernel 5.10 are not usable and backporting the changes is not easy as they have changed drastically from 5.10 to 5.15 ath11k will only be available on targets that use kernel 5.15. Signed-off-by: Robert Marko <robimarko@gmail.com>
* linux-firmware: package ath11k consumer cards firmwareRobert Marko2022-12-192-1/+24
| | | | | | Package firmware for ath11k supported QCA consumer cards from linux-firmware. Signed-off-by: Robert Marko <robimarko@gmail.com>
* kernel: package QRTR supportRobert Marko2022-12-191-0/+64
| | | | | | | | | | | | | | | | | QRTR is Qualcomm IPC router protocol and ath11k requires it for both AHB and PCI support, so package it as a kernel module so it can be added as a dependency to the ath11k module. Only kernel 5.15 is currently supported due to various things missing in 5.10 whose backporting is out of scope for this patch. SMD, TUN and MHI variants are packaged. SMD variant depends on the ipq807x target as it has dependency on the RPMSG drivers which are Qualcomm and SoC specific anyway. Signed-off-by: Robert Marko <robimarko@gmail.com>
* iproute2: update to 6.1.0Nick Hainke2022-12-182-4/+4
| | | | | | | | | | Announcement: https://lore.kernel.org/netdev/20221214094130.7b11ec2e@hermes.local/T/#t Refresh patch: - 170-ip_tiny.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* ramips: add support for SNR-CPE-W4N-MT routerAlexey Bartenev2022-12-171-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | General specification: - SoC Type: MediaTek MT7620N (580MHz) - ROM: 8 MB SPI-NOR (W25Q64FV) - RAM: 64 MB DDR (M13S5121632A) - Switch: MediaTek MT7530 - Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4) - Wireless 2.4 GHz: b/g/n - Buttons: 1 button (RESET) - Bootloader: U-Boot 1.1.3, MediaTek U-Boot: 5.0.0.5 - Power: 12 VDC, 1.0 A Flash by the native uploader in 2 stages: 1. Use the native uploader to flash an initramfs image. Choose openwrt-ramips-mt7620-snr_cpe-w4n-mt-initramfs-kernel.bin file by "Administration/Management/Firmware update/Choose File" in vendor's web interface (ip: 192.168.1.10, login: Admin, password: Admin). Wait ~160 seconds. 2. Flash a sysupgrade image via the initramfs image. Choose openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin file by "System/Backup/Flash Firmware/Flash image..." in LuCI web interface (ip: 192.168.1.1, login: root, no password). Wait ~240 seconds. Flash by U-Boot TFTP method: 1. Configure your PC with IP 192.168.1.131 2. Set up TFTP server and put the openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin image on your PC 3. Connect serial port (57600 8N1) and turn on the router. Then interrupt "U-Boot Boot Menu" by hitting 2 key (select "2: Load system code then write to Flash via TFTP."). Press Y key when show "Warning!! Erase Linux in Flash then burn new one. Are you sure? (Y/N)" Input device IP (192.168.1.1) ==:192.168.1.1 Input server IP (192.168.1.131) ==:192.168.1.131 Input Linux Kernel filename () ==: openwrt-ramips-mt7620-snr_cpe-w4n-mt-squashfs-sysupgrade.bin 3. Wait ~120 seconds to complete flashing Signed-off-by: Alexey Bartenev <41exey@proton.me>
* gdb: Do not link against xxhashHauke Mehrtens2022-12-171-0/+1
| | | | | | | | | | libxxhash is now available in the OpenWrt package feed and gdb will link against it if gdb finds this library. Explicitly deactivate the usage of xxhash. This should fix the build of gdb in build bots. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* sunxi: fix board_name for MarsBoard A10Chukun Pan2022-12-171-2/+2
| | | | | | | The compatible in the device tree is "haoyu,a10-marsboard", modify the board_name to keep it consistent. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* strace: update to 6.1Nick Hainke2022-12-171-2/+2
| | | | | | | Release Notes: https://github.com/strace/strace/releases/tag/v6.1 Signed-off-by: Nick Hainke <vincent@systemli.org>
* trace-cmd: update to v3.1.5Nick Hainke2022-12-171-2/+2
| | | | | | Update to latest release. Signed-off-by: Nick Hainke <vincent@systemli.org>
* libtracefs: update to 1.6.3Nick Hainke2022-12-171-2/+2
| | | | | | Update to latest release. Signed-off-by: Nick Hainke <vincent@systemli.org>
* libtraceevent: update to 1.7.0Nick Hainke2022-12-171-2/+2
| | | | | | Update to latest release. Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: Make use of KERNEL_MAKEHauke Mehrtens2022-12-1710-31/+13
| | | | | | | | | | | | Make use of KERNEL_MAKE in kernel packages were easily possible. This moves some more code to common places and reduces the number of lines. It is defined like this: KERNEL_MAKE = $(MAKE) $(KERNEL_MAKEOPTS) KERNEL_MAKEOPTS = -C $(LINUX_DIR) $(KERNEL_MAKE_FLAGS) Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mediatek: add alternative stock layout for Xiaomi Redmi Router AX6000Chen Minqiang2022-12-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In this implementation, the flash partition layout is adjusted to avoid modifying the uboot environment of mtdparts. This ensures that the 30M ubi_kernel partition remains aligned with the stock ubi partition, and the kernel volume is placed in it. This allows the stock uboot to boot from it without changing the mtdparts, which is useful for reverting back to the stock firmware using Xiaomi Firmware Tools. In actual testing, modifying mtdparts has been found to break Xiaomi Firmware Tools. 1. use ARTIFACTS to generate initramfs-factory.ubi for easy installation. 2. The NAND flash layout is changed to allow for reverting back to the stock firmware. 3. Before performing sysupgrade, do some cleanup in platform_pre_upgrade to ensure a clean installation of OpenWRT. 4. Setup the uboot env to ensure that the system always boot, which can be helpful for users who may forget to do this before sysupgrade in the initramfs. New flash instructions: 1. Gain ssh access. Please refer to: https://openwrt.org/toh/xiaomi/redmi_ax6000#installation) 2. Check which system current u-boot is loading from: COMMAND: `cat /proc/cmdline` sample OUTPUT: `console=ttyS0,115200n1 loglevel=8 firmware=1 uart_en=1` if firmware=1, current system is ubi1 if firmware=0, current system is ubi0 3. Setup nvram and write the firmware: If the current system is ubi1, please set it up so that the next time it will boot from ubi, and write the firmware to ubi: ``` nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=0 nvram set flag_last_success=0 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit ubiformat /dev/mtd8 -y -f /tmp/initramfs-factory.ubi ``` If the current system is ubi, please set it up so that the next time it will boot from ubi1, and write the firmware to ubi1: ``` nvram set boot_wait=on nvram set uart_en=1 nvram set flag_boot_rootfs=1 nvram set flag_last_success=1 nvram set flag_boot_success=1 nvram set flag_try_sys1_failed=0 nvram set flag_try_sys2_failed=0 nvram commit ubiformat /dev/mtd9 -y -f /tmp/initramfs-factory.ubi ``` 4. After rebooting, the system should now boot into the openwrt initramfs. Flash the squashfs-sysupgrade.bin via using ssh or luci. ``` sysupgrade -n /tmp/squashfs-sysupgrade.bin ``` Done. For existing users of the Redmi AX6000 running OpenWrt, here are the steps to switch to this new layout: 1. Flash initramfs-factory.ubi ``` mtd -r -e ubi write /tmp/initramfs-factory.ubi ubi ``` 2. After rebooting, the system will boot into the new openwrt-initramfs. Log in and perform a sysupgrade to complete the process. ``` sysupgrade -n /tmp/squashfs-sysupgrade.bin ``` Signed-off-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* base-files: sysupgrade-tar: allow separated kernel/rootfs ubiChuanhong Guo2022-12-171-14/+27
| | | | | | | | | | There are some devices putting kernel and rootfs on separated ubi volumes. To make OpenWrt compatible with their bootloader, we need to put kernel and rootfs into separated ubi volumes. Add support for CI_KERN_UBIPART and CI_ROOT_UBIPART for this situation. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* base-files: split ubi attaching out of nand_upgrade_prepare_ubiChuanhong Guo2022-12-171-27/+38
| | | | | | | split ubi reformat/attach into nand_attach_ubi in preparation for reusing this code in other functions. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* kernel: add driver package for WS2812B LEDsChuanhong Guo2022-12-163-0/+268
| | | | | | | Two WS2812B (NeoPixel) clones are used in Xiaomi Redmi AX6000 as indicator lights. Add a driver for controlling it using SPI MOSI. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mac80211: fix a regression in processing management frames for AP VLAN ↵Felix Fietkau2022-12-161-21/+22
| | | | | | | | interfaces Fixes re-assoc of WDS stations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: enable coredumpsFelix Fietkau2022-12-161-0/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: always set a default for the nas identifierFelix Fietkau2022-12-161-2/+3
| | | | | | | It is used for both 802.11r and WPA enterprise. Setting it when not needed is harmless Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: work around a race condition on detecting a phy while bringing it upFelix Fietkau2022-12-161-0/+4
| | | | | | | | When reloading modules and running wifi, a phy can sometimes be renamed while in the middle of a hotplug call that tries to detect new phys This can lead to bogus wifi-device sections being created Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: fix uninitialized variable in rx->link/link_sta initialization fixFelix Fietkau2022-12-161-23/+15
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for automatically setting RADIUS own-ip dynamicallyFelix Fietkau2022-12-162-2/+118
| | | | | | Some servers use the NAS-IP-Address attribute as a destination address Signed-off-by: Felix Fietkau <nbd@nbd.name>
* rpcd: update to latest Git HEADJo-Philipp Wich2022-12-161-5/+7
| | | | | | | | | 7de4820 iwinfo: add "hwmodes_text" to the info output b3f530b iwinfo: clean up rpc_iwinfo_call_hw_ht_mode() c46ad61 iwinfo: reuse infos provided by libiwinfo 6c5e900 iwinfo: constify string map arg for rpc_iwinfo_call_int() Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* iwinfo: update to latest Git HEADJo-Philipp Wich2022-12-161-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8d15809 cli: print current HT mode 8f86dd6 cli: use IWINFO_HTMODE_COUNT f36b72b cli: use IWINFO_KMGMT_NAMES 91be7e0 cli: use IWINFO_CIPHER_NAMES 49b6ec9 cli: fix printing the scan channel width b1c8873 cli: fix marking the active channel 9e14e64 utils: add iwinfo_band2ghz() and iwinfo_ghz2band() helpers e084781 utils: add helper functions to get names by values d09a77a utils: add iwinfo_htmode_is_{ht|vht|he} helpers 8752977 utils: add and use iwinfo_format_hwmodes() 02f433e lib: add IWINFO_80211_COUNT and IWINFO_80211_NAMES 1d30df1 lib: add IWINFO_BAND_COUNT and IWINFO_BAND_NAMES aefd0ef lib: use common IWINFO_CIPHER_NAMES strings a5b30de lib: add IWINFO_OPMODE_COUNT and use it for IWINFO_OPMODE_NAMES 9f29e79 lib: constify and fixup the string array definitions fddc015 nl80211: mark frequencies where HE operation in not allowed 6d50a7c nl80211: add support for HE htmodes 4ba5713 nl80211: properly get available bands for the hwmode 91b2ada nl80211: update the kernel header nl80211.h 3f619a5 nl80211: fix frequency/channel conversion for the 6G band a77d915 nl80211: don't guess if a name is an ifname c27ce71 devices: add usb device MediaTek MT7921AU 14f864e nl80211: add ability to describe USB devices a5a75fd nl80211: remove ancient wpa_supplicant ctrl socket path dd4e1ff nl80211: fix wpa supplicant ctrl socket permissions d638163 fix -Wdangling-else warnings 4aa6c5a fix -Wreturn-type warning 3112726 fix -Wpointer-sign warning ebd5f84 fix -Wmaybe-uninitialized warning 5469898 fix -Wunused-variable warnings 462b679 fix -Wduplicate-decl-specifier warnings ccaabb4 fix -Wformat-truncation warnings 50380db enable useful compiler warnings via -Wall Fixes: https://github.com/openwrt/openwrt/issues/10158 Fixes: https://github.com/openwrt/openwrt/issues/10687 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211: fix connecting multiple wds stations to an APFelix Fietkau2022-12-142-1/+26
| | | | | | A faulty check prevented the AP_VLAN interfaces from being brought up Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libpcap: add support for B.A.T.M.A.N. AdvancedLinus Lüssing2022-12-141-0/+642
| | | | | | | | | | | | | | | | | | | | | | This adds support for the layer 2 mesh routing protocol B.A.T.M.A.N. Advanced. "batadv" can be used to filter on batman-adv packets. It also allows later filters to look at frames inside the tunnel when both "version" and "type" are specified. Documentation for the batman-adv protocol can be found at the following locations: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/networking/batman-adv.rst https://www.open-mesh.org/ -- This is a backport of the following upstream pull request: https://github.com/the-tcpdump-group/libpcap/pull/980 -> "Add support for B.A.T.M.A.N. Advanced #980" Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
* ramips: add support for Etisalat S3Mikhail Zhilkin2022-12-131-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Etisalat S3 is a wireless WiFi 5 router manufactured by Sercomm company. Device specification -------------------- SoC Type: MediaTek MT7621AT RAM: 256 MiB Flash: 128 MiB Wireless 2.4 GHz (MT7603EN): b/g/n, 2x2 Wireless 5 GHz (MT7615E): a/n/ac, 4x4 Ethernet: 5x GbE (WAN, LAN1, LAN2, LAN3, LAN4) USB ports: 1x USB3.0 Button: 2 buttons (Reset & WPS) LEDs: - 1x Status (RGB) - 1x 2.4G (blue, hardware, mt76-phy0) - 1x 5G (blue, hardware, mt76-phy1) Power: 12 VDC, 1.5 A Connector type: barrel Bootloader: U-Boot Installation ----------------- 1. Login to the router web interface under admin account 2. Navigate to Settings -> Configuration -> Save to Computer 3. Decode the configuration. For example, using cfgtool.py tool (see related section): cfgtool.py -u configurationBackup.cfg 4. Open configurationBackup.xml and find the following line: <PARAMETER name="Password" type="string" value="<your router serial \ is here>" writable="1" encryption="1" password="1"/> 5. Insert the following line after and save: <PARAMETER name="Enable" type="boolean" value="1" writable="1" encryption="0"/> 6. Encode the configuration. For example, using cfgtool.py tool: cfgtool.py -p configurationBackup.xml 7. Upload the changed configuration (configurationBackup_changed.cfg) to the router 8. Login to the router web interface (SuperUser:ETxxxxxxxxxx, where ETxxxxxxxxxx is the serial number from the backplate label) 9. Navigate to Settings -> WAN -> Add static IP interface (e.g. 10.0.0.1/255.255.255.0) 10. Navigate to Settings -> Remote cotrol -> Add SSH, port 22, 10.0.0.0/255.255.255.0 and interface created before 11. Change IP of your client to 10.0.0.2/255.255.255.0 and connect the ethernet cable to the WAN port of the router 12. Connect to the router using SSH shell under SuperUser account 13. Run in SSH shell: sh 14. Make a mtd backup (optional, see related section) 15. Change bootflag to Sercomm1 and reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3 reboot 16. Login to the router web interface under admin account 17. Remove dots from the OpenWrt factory image filename 18. Update firmware via web using OpenWrt factory image Revert to stock --------------- Change bootflag to Sercomm1 in OpenWrt CLI and then reboot: printf 1 | dd bs=1 seek=7 count=1 of=/dev/mtdblock3 mtd backup ---------- 1. Set up a tftp server (e.g. tftpd64 for windows) 2. Connect to a router using SSH shell and run the following commands: cd /tmp for i in 0 1 2 3 4 5 6 7 8 9 10; do nanddump -f mtd$i /dev/mtd$i; \ tftp -l mtd$i -p 10.0.0.2; md5sum mtd$i >> mtd.md5; rm mtd$i; done tftp -l mtd.md5 -p 10.0.0.2 Recovery -------- Use sercomm-recovery tool. Link: https://github.com/danitool/sercomm-recovery MAC Addresses ------------- +-----+------------+---------+ | use | address | example | +-----+------------+---------+ | LAN | label | *:50 | | WAN | label + 11 | *:5b | | 2g | label + 2 | *:52 | | 5g | label + 3 | *:53 | +-----+------------+---------+ The label MAC address was found in Factory 0x21000 cfgtool.py ---------- A tool for decoding and encoding Sercomm configs. Link: https://github.com/r3d5ky/sercomm_cfg_unpacker Co-authored-by: Karim Dehouche <karimdplay@gmail.com> Co-authored-by: Maximilian Weinmann <x1@disroot.org> Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
* mac80211: add a fix for a crash in __ieee80211_rx_h_amsduFelix Fietkau2022-12-131-0/+413
| | | | | | Fix initialization of rx->link_sta Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: remove DRIVER_11N_SUPPORTAndre Heider2022-12-1314-36/+21
| | | | | | | | | | | | hostapd's compile time option CONFIG_IEEE80211N was removed almost 3 years ago, 80.211n/HT is always included since then. Noticed because `hostapd -v11n` confusingly returned an error. See hostapd's commit: f3bcd69603 "Remove CONFIG_IEEE80211N build option" Signed-off-by: Andre Heider <a.heider@gmail.com>
* hostapd: fix 350-nl80211_del_beacon_bss.patchAndre Heider2022-12-131-1/+1
| | | | | | | | | | | | | | | | | Pass the expected struct: ../src/drivers/driver_nl80211.c: In function 'wpa_driver_nl80211_del_beacon': ../src/drivers/driver_nl80211.c:2945:31: warning: passing argument 1 of 'nl80211_bss_msg' from incompatible pointer type [-Wincompatible-pointer-types] 2945 | msg = nl80211_bss_msg(drv, 0, NL80211_CMD_DEL_BEACON); | ^~~ | | | struct wpa_driver_nl80211_data * ../src/drivers/driver_nl80211.c:695:50: note: expected 'struct i802_bss *' but argument is of type 'struct wpa_driver_nl80211_data *' 695 | struct nl_msg * nl80211_bss_msg(struct i802_bss *bss, int flags, uint8_t cmd) | ~~~~~~~~~~~~~~~~~^~~ Fixes: 35ff1affe8 "hostapd: update to 2022-05-08" Signed-off-by: Andre Heider <a.heider@gmail.com>
* hostapd: remove an unused function from ubus.cAndre Heider2022-12-131-26/+0
| | | | | | | eee80211_frequency_to_channel() isn't used anymore, which is a leftover from: 2a31e9ca97 "hostapd: add op-class to get_status output" Signed-off-by: Andre Heider <a.heider@gmail.com>
* ath9k: add missing dependency on random coreFelix Fietkau2022-12-131-1/+1
| | | | | Reported-by: Hartmut Birr <e9hack@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name>
* sunxi: fix 253-sunxi-h5-add-support-for-nanopi-r1s-h5 patch offsetChristian Lamparter2022-12-121-1/+1
| | | | | | | This showed up in the log: |Hunk #1 succeeded at 555 (offset -83 lines). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: modules/lib-lz4: add lz4hc_compressTony Butler2022-12-112-1/+7
| | | | | | | | | enable option `CONFIG_CRYPTO_LZ4HC` to match default kernel config this only adds the `lz4hc_compress` module, and has no effect on the `lz4_decompress` module which already supports any flavor Signed-off-by: Tony Butler <spudz76@gmail.com>
* rtl8812au-ct: fix build with newer backports cfg80211 apiFelix Fietkau2022-12-111-0/+56
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wolfssl: fix build with /dev/cryptoChukun Pan2022-12-111-0/+33
| | | | | | | | | | Backport upstream patch to fix build error when /dev/crypto enabled. https://github.com/wolfSSL/wolfssl/commit/dc9f46a3be00b5e82684a158605189d1278e324c Fixes: #10944 Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* umbim: Allow roaming and partner connectionsJulio Gonzalez Gil2022-12-111-6/+25
| | | | | | | | | | Allow registration if the SIM is roaming or partner mode, by adding two new options to the protocol. Until now, such registration failed because umbim returns exit codes 4 and 5 for such situations. Signed-off-by: Julio Gonzalez Gil <git@juliogonzalez.es>
* libtracefs: update to 1.6.2Nick Hainke2022-12-111-2/+2
| | | | | | | | 378a9dd libtracefs: version 1.6.2 e6daa60 libtracefs: Add unit test to test mounting of tracefs_{tracing,debug}_dir() 32acbbf libtracefs: Have tracefs_{tracing,debug}_dir() mount {tracefs,debugfs} if not mounted Signed-off-by: Nick Hainke <vincent@systemli.org>
* mt76: update to the latest versionFelix Fietkau2022-12-102-1611/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ec46d7486ab9 sync with upstream 2575de3aea33 wifi: mt76: mt7921: introduce chanctx support 473cebb3c3e1 wifi: mt76: fix bandwidth 80MHz link fail in 6GHz band de3e77227f62 wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices f0c191a9f6cd wifi: mt76: mt7996: add missing argument in mt7996_queue_rx_skb() d3838a52df62 wifi: mt76: mt7996: enable use_cts_prot support 98492dff3bec wifi: mt76: mt7996: enable ack signal support 2a41e7a82f86 wifi: mt76: mt7996: add support to configure spatial reuse parameter set 194cb3392829 mt76: mt7915: add missing of_node_put() f91d6f3b73ac wifi: mt76: mt7921s: fix slab-out-of-bounds access in sdio host 1ce4970d799f wifi: mt76: mt7915: fix mt7915_rate_txpower_get() resource leaks 379f3fc0fc43 wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_ie_countdown() 233c272f0f86 wifi: mt76: mt7996: fix insecure data handling of mt7996_mcu_rx_radar_detected() 5616c4cc1d5d wifi: mt76: mt7996: fix integer handling issue of mt7996_rf_regval_set() f9598e6d4c2c wifi: mt76: mt7915: split mcu chan_mib array up b252d94bd763 wifi: mt76: mt7915: check return value before accessing free_block_num f1cc3696d725 wifi: mt76: mt7996: check return value before accessing free_block_num b94ba58fa698 wifi: mt76: mt7915: check the correctness of event data 35843a1670c0 wifi: mt76: mt7915: drop always true condition of __mt7915_reg_addr() 01a256c1dc41 wifi: mt76: mt7996: drop always true condition of __mt7996_reg_addr() 5185bbab8953 wifi: mt76: mt7996: fix endianness warning in mt7996_mcu_sta_he_tlv eeb6949c4d06 wifi: mt76: mt76x0: fix oob access in mt76x0_phy_get_target_power 063823aba978 wifi: mt76: mt7921: add support to update fw capability with MTFG table a44109267e4e wifi: mt76: mt7996: fix unintended sign extension of mt7996_hw_queue_read() be5dbb781068 wifi: mt76: mt7915: fix unintended sign extension of mt7915_hw_queue_read() adf9042b6f63 wifi: mt76: fix coverity uninit_use_in_call in mt76_connac2_reverse_frag0_hdr_trans() 551201379efe wifi: mt76: move leds field in leds struct 14fbb6d6e85e wifi: mt76: move leds struct in mt76_phy 81edc468fc62 wifi: mt76: mt7915: enable per-phy led support bbad827e447f wifi: mt76: mt7615: enable per-phy led support 8e7e7e52fc09 wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails 95c66d651133 wifi: mt76: handle possible mt76_rx_token_consume failures 52d04463a66e wifi: mt76: dma: rely on queue page_frag_cache for wed rx queues 7fae1de12ae7 wifi: mt76: mt7921: resource leaks at mt7921_check_offload_capability() Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: update to linux 6.1-rc8Felix Fietkau2022-12-10127-10176/+4391
| | | | | | This should help stay in sync with upstream development Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-19 23:14:59 +0000