aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* mediatek: add Xiaomi Redmi Router AX6000 supportChukun Pan2022-10-301-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Hardware specification: SoC: MediaTek MT7986A 4x A53 Flash: ESMT F50L1G41LB 128 MB RAM: K4A4G165WF-BCWE 512 MB Ethernet: 4x 10/100/1000 Mbps WiFi1: MT7976GN 2.4GHz ax 4x4 WiFi2: MT7976AN 5GHz ax 4x4 Button: Mesh, Reset Flash instructions: 1. Gain ssh and serial port access, see the link below: https://openwrt.org/toh/xiaomi/redmi_ax6000#installation 2. Use ssh or serial port to log in to the router, and execute the following command: nvram set boot_wait=on nvram set flag_boot_rootfs=0 nvram set flag_boot_success=1 nvram set flag_last_success=1 nvram set flag_try_sys1_failed=8 nvram set flag_try_sys2_failed=8 nvram commit 3. Set a static ip on the ethernet interface of your computer (e.g. default: ip 192.168.31.100, gateway 192.168.31.1) 4. Download the initramfs image, rename it to initramfs.bin, and host it with the tftp server. 5. Interrupt U-Boot and run these commands: setenv mtdparts nmbm0:1024k(bl2),256k(Nvram),256k(Bdata),2048k(factory),2048k(fip),256k(crash),256k(crash_log),112640k(ubi) saveenv tftpboot initramfs.bin bootm 6. After openwrt boots up, use scp or luci web to upload sysupgrade.bin to upgrade. Revert to stock firmware: Restore mtdparts back to default, then use the vendor's recovery tool (Windows only). Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* base-files: verify nand sysupgrade imagesRodrigo Balerdi2022-10-302-20/+58
| | | | | | | For nand sysupgrade image files having tar/gzip/tgz envelopes, verify envelope integrity before starting sysupgrade. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: accept gzipped nand sysupgrade imagesRodrigo Balerdi2022-10-301-31/+55
| | | | | | | | | | | | | | | | When firmware images only contained compressed kernels and squashfs roots, uncompressed tar files were a good option. We are now using UBIFS images, both raw and tarred, as well as ubinized (full UBI partition) images, all of which benefit greatly from compression. For example, a raw ubinized backup taken from a running Askey RT4230W REV6 (such full backups can be restored via the LUCI's sysupgrade UI) is over 400 MB, but compresses to less than 10 MB. This commit adds support for gzipped versions of all file types already accepted by the nand sysupgrade mechanism, be them raw or tarred. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: fix ubinized nand sysupgradeRodrigo Balerdi2022-10-302-14/+33
| | | | | | | | | | | | It has been reported that ubinized nand sysupgrade fails under certain circumstances, being unable to detach the existing ubi partition due to volumes within the partition being mounted. This is an attempt to solve such issues by unmounting and removing ubiblock devices and unmounting ubi volumes within the target partition prior to detaching and formatting it. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: fix and clean up nand sysupgrade codeRodrigo Balerdi2022-10-301-38/+42
| | | | | | | | | | - Never return from 'nand_do_upgrade', not even in case of errors, as that would cause execution of sysupgrade code not intended for NAND devices. - Unify handling of sysupgrade success and failure. - Detect and report more error conditions. - Fix outdated/incorrect/unclear comments. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: wifi: for wifi reconf, scan_wifi after network reloadBob Cantor2022-10-251-1/+1
| | | | | | | | | | | Commit e8b542960921 included an unintended change and we now call scan_wifi before a network reload. Restore the original behaviour and call scan_wifi only after a network reload. Fixes: e8b542960921 ("base-files: wifi: tidy up the reconf code") Signed-off-by: Bob Cantor <bobc@confidesk.com>
* base-files: wifi: for wifi up, scan_wifi after network reloadBob Cantor2022-10-251-1/+1
| | | | | | | | | | | Commit b82cc8071366 included an unintended change and we now call scan_wifi before a network reload. Restore the original behaviour and call scan_wifi only after a network reload. Fixes: b82cc8071366 ("base-files: wifi: swap the order of some ubus calls") Signed-off-by: Bob Cantor <bobc@confidesk.com>
* mac80211: fix masking nested A-MSDU support for meshAndre Heider2022-10-251-1/+1
| | | | | | | | | CONFIG_MAC80211_MESH isn't defined for this package, rendering the patch useless. Match protecting the access of sta_info.mesh with the very same define declaring it. Fixes 45109f69a6 "mac80211: fix compile error when mesh is disabled" Signed-off-by: Andre Heider <a.heider@gmail.com>
* mac80211: use KERNEL_MAKEOPTS instead of KERNEL_MAKE_FLAGSFelix Fietkau2022-10-241-2/+2
| | | | | | Fixes issues with disabling stack validation on non-linux systems Signed-off-by: Felix Fietkau <nbd@nbd.name>
* button-hotplug: simplify buildFelix Fietkau2022-10-243-19/+2
| | | | | | Remove unnecessary kconfig junk Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Update to version 5.15.74-1Hauke Mehrtens2022-10-2329-2258/+36
| | | | | | | | This updates mac80211 to version 5.15.74-1 which is based on kernel 5.15.74. The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* readline: update to 8.2Nick Hainke2022-10-231-2/+2
| | | | | | | Release Announcement: https://lists.gnu.org/archive/html/info-gnu/2022-09/msg00013.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* gdb: add patch adding support for readline 8.2Nick Hainke2022-10-231-0/+31
| | | | | | | Add "001-Add-support-for-readline-8.2.patch" adding support for readline 8.2. Signed-off-by: Nick Hainke <vincent@systemli.org>
* ksmbd: update to 3.4.6Nick Hainke2022-10-232-71/+2
| | | | | | | | | | Release Announcement: https://github.com/cifsd-team/ksmbd/releases/tag/3.4.6 Remove upstreamed: - 10-fix-build-on-kernel-5.15.52-or-higher.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* iproute2: update to 6.0.0Nick Hainke2022-10-2210-34/+11
| | | | | | | | | | | | | | | | | | | | Release Notes: https://lore.kernel.org/netdev/20221004082610.56b04719@hermes.local/t/ Remove upstreamed patch: - 010-ipstats-Add-param.h-for-musl.patch Refreshed: - 140-keep_libmnl_optional.patch - 145-keep_libelf_optional.patch - 150-keep_libcap_optional.patch - 155-keep_tirpc_optional.patch - 170-ip_tiny.patch - 190-fix-nls-rpath-link.patch - 200-drop_libbsd_dependency.patch - 300-selinux-configurable.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* thc-ipv6: update to 3.8Nick Hainke2022-10-223-14/+14
| | | | | | | | | | | | | | | | | | Remove upstreamed patches: - 000-cflags_override.patch Manually refresh patches: - 100-no-ssl.patch Add patches: - 101-remove-march-native.patch Add THC_APPLETS: - toobigsniff6 - flood_unreach6 - connect6 Signed-off-by: Nick Hainke <vincent@systemli.org>
* gettext-full: update to 0.21.1Nick Hainke2022-10-223-88/+48
| | | | | | | | | Release Announcement: https://lists.gnu.org/archive/html/info-gnu/2020-07/msg00009.html Further, refresh 001-autotools.patch and manually refresh 010-m4.patch. Signed-off-by: Nick Hainke <vincent@systemli.org>
* libbsd: update to 0.11.7Nick Hainke2022-10-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | Changes: 084911c Release libbsd 0.11.7 3538d38 man: Discourage using the library in non-overlay mode 03fccd1 include: Adjust reallocarray() per glibc adoption 6b6e686 include: Adjust arc4random() per glibc adoption da1f45a include: explicit_bzero() requires _DEFAULT_SOURCE 2f9eddc include: Simplify glibc version dependent macro handling 28298ac doc: Switch references from pkg-config to pkgconf ef981f9 doc: Add missing empty line to separate README sections 6928d78 doc: Refer to the main git repository as primary d586575 test: Fix explicit_bzero() test on the Hurd be327c6 fgetwln: Add comment about lack of getwline(3) for recommendation a14612d setmode: Dot not use saveset after free f4baceb man: Rewrite gerprogname(3bsd) from scratch f35c545 man: Lowercase man page title b466b14 man: Document that some arc4random(3) functions are now in glibc 2.36 1f6a48b Sync arc4random(3) implementation from OpenBSD 873639e Fix ELF support for big endian SH c9c78fd man: Use -compact also for alternative functions in libbsd(7) 5f21307 getentropy: Fix function cast for getauxval() Signed-off-by: Nick Hainke <vincent@systemli.org>
* trace-cmd: update to v3.1.4Nick Hainke2022-10-221-3/+3
| | | | | | ae6db8e trace-cmd record: Use result of fcntl(GETPIPE_SZ) Signed-off-by: Nick Hainke <vincent@systemli.org>
* uboot-envtools: update to 2022.10Nick Hainke2022-10-221-2/+2
| | | | | | Update to latest version. Signed-off-by: Nick Hainke <vincent@systemli.org>
* linux-firmware: update to 20221012Nick Hainke2022-10-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: cfbd668 rtl_bt: Update RTL8852C BT USB firmware to 0xD5B8_A40A f49effc amdgpu: update GC 10.3.6 RLC firmware f9a1c7f amdgpu: update GC 10.3.7 RLC firmware eb1e45c amdgpu: update Yellow Carp RLC firmware 88557e1 amdgpu: update Beige Goby RLC firmware 2d3c1f8 amdgpu: update Dimgrey Cavefish RLC firmware d513825 amdgpu: update Navy Flounder RLC firmware c132bef amdgpu: update Sienna Cichlid RLC firmware 675bd6a mediatek: Update mt8195 SOF firmware to v0.4.1 44fa25d qcom: add squashed version of a530 zap shader d2aac63 rtw89: 8852c: update fw to v0.27.56.1 c9a1ddf rtw89: 8852c: update fw to v0.27.56.0 b7d6c9f mediatek: Update mt8186 SCP firmware fdf1a65 linux-firmware: Update AMD cpu microcode 375d450 mediatek: mt8195: Update scp.img to v2.0.11956 daee413 mediatek: Add new mt8195 SOF firmware 213255f mediatek: Update mt8186 SOF firmware to v0.2.1 9f88ec4 linux-firmware: update firmware for mediatek bluetooth chip (MT7922) bb3f948 rtl_bt: Update RTL8852A BT USB firmware to 0xD9B8_8207 6be4c4c linux-firmware: update firmware for mediatek bluetooth chip (MT7921) ea94bda linux-firmware: update firmware for MT7922 WiFi device 9490e8a linux-firmware: update firmware for MT7921 WiFi device e6e48db cxgb4: Update firmware to revision 1.27.0.0 51fff4e i915: Add versionless HuC files for current platforms 067440c i915: Add GuC v70.5.1 for DG1, DG2, TGL and ADL-P 0e8f546 qca: Update firmware files for BT chip WCN3991. 3593bb7 Removing crnv32 Signed-off-by: Nick Hainke <vincent@systemli.org>
* mtd-utils: update to 2.1.5Nick Hainke2022-10-222-3/+3
| | | | | | | | | | Release Notes: https://lore.kernel.org/buildroot/c0992bbb-9487-9a51-ea9f-39cf074b61ec@sigma-star.at/ Refresh patches: - 130-lzma_jffs2.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* kernel: ltq-adsl-mei: Fix compilation with Linux 5.15Martin Blumenstingl2022-10-221-0/+1
| | | | | | | struct of_device_id is not implicitly included anymore. Include <linux/mod_devicetable.h> to fix compilation on Linux 5.15. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: ltq-vmmc: Fix compilation with Linux 5.15Martin Blumenstingl2022-10-221-0/+10
| | | | | | | MODULE_SUPPORTED_DEVICE is gone after Linux 5.15. Drop it's usage on newer kernels to fix compilation with Linux 5.15. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: ltq-vdsl-vr9-mei: Fix compilation with Linux 5.15Martin Blumenstingl2022-10-222-10/+71
| | | | | | | The result of copy_to_user() now has to be checked explicitly. Also MODULE_SUPPORTED_DEVICE is gone after Linux 5.10. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: ltq-tapi: Fix compilation with Linux 5.15Martin Blumenstingl2022-10-221-0/+10
| | | | | | | MODULE_SUPPORTED_DEVICE was removed after Linux 5.10. Drop it from the driver as well. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: ltq-deu: Fix compilation with Linux 5.15Martin Blumenstingl2022-10-223-0/+11
| | | | | | | | | | struct of_device_id is not implicitly included anymore. Include <linux/mod_devicetable.h> to fix compilation on Linux 5.15. Also upstream commit a24d22b225ce15 ("crypto: sha - split sha.h into sha1.h and sha2.h") from Linux 5.11 moves functionality from sha.h to sha1.h. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* ltq-ifxos: add compatibility with kernel 5.15Jan Hoffmann2022-10-221-0/+68
| | | | | | | set_fs is no longer supported since kernel 5.13 for mips. Signed-off-by: Jan Hoffmann <jan@3e8.eu> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: x86: Add glue_helper.ko only on kernel < 5.12Hauke Mehrtens2022-10-221-2/+2
| | | | | | | This module was removed with kernel 5.12. This fixes the build of the x86 target. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* uboot-fritz4040: build FritzBox 7520 variantAndre Heider2022-10-201-1/+6
| | | | | | | | | | | | Support was added as variant of 7530 (DEVICE_ALT0_*) in: cb6f4be1 "ipq40xx: add support for FRITZ!Box 7520" u-boot has a distinct config for it [0], built it. [0] https://github.com/chunkeey/FritzBox-4040-UBOOT/pull/6 Signed-off-by: Andre Heider <a.heider@gmail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
* kernel: modules: iio: create and use AddDependsDaniel Golle2022-10-191-52/+55
| | | | | | Just like for other subsystems, create a reusable AddDepends call. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* wireless-tools: add package CPE IDPetr Štetiar2022-10-191-0/+1
| | | | | | | | Common Platform Enumeration (CPE) is a structured naming scheme for information technology systems, software, and packages. Suggested-by: Steffen Pfendtner <s.pfendtner@ads-tec.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* ncurses: add package CPE IDPetr Štetiar2022-10-191-0/+1
| | | | | | | | Common Platform Enumeration (CPE) is a structured naming scheme for information technology systems, software, and packages. Suggested-by: Steffen Pfendtner <s.pfendtner@ads-tec.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* arm-trusted-firmware-sunxi: add package CPE IDPetr Štetiar2022-10-191-0/+1
| | | | | | | | Common Platform Enumeration (CPE) is a structured naming scheme for information technology systems, software, and packages. Suggested-by: Steffen Pfendtner <s.pfendtner@ads-tec.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* libnftnl: add package CPE IDPetr Štetiar2022-10-191-0/+1
| | | | | | | | Common Platform Enumeration (CPE) is a structured naming scheme for information technology systems, software, and packages. Suggested-by: Steffen Pfendtner <s.pfendtner@ads-tec.de> Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kernel: test for kernel version greater 5.13 to fix mmc-spiNick Hainke2022-10-191-2/+3
| | | | | | | | | | The of_mmc_spi.o resource is provider agnostic in kernels greater 5.13 and does not depend anymore on CONFIG_OF [0]. [0] - https://github.com/torvalds/linux/commit/edd602146507532c1714d8428f654b87205f492e Suggested-by: John Thomson <git@johnthomson.fastmail.com.au> Signed-off-by: Nick Hainke <vincent@systemli.org>
* uboot-envtools: mediatek/mt7622: don't rely on mapped rootfsDaniel Golle2022-10-191-6/+3
| | | | | | | | Similar to the implementation for the BPi-R3 use the same logic also for determining the device to look for the U-Boot environment of the BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: disable kmod-fs-ntfs3 for Linux 5.10Rafał Miłecki2022-10-191-0/+1
| | | | | | | | This new NTFS driver was added in kernel 5.15. Avoid building empty package for kernel 5.10. Fixes: bd0db6017b192 ("kernel: 5.15: add new module") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* uboot-envtools: mediatek_filogic: fix BPi-R3 when no OS is installedDaniel Golle2022-10-181-7/+4
| | | | | | | | | | Fix accessing the environment in case no OS is installed on the flash media selected for boot as this is possible when booting initramfs. In case of relying on the device specified to be mounted as rootfs to be present, rather just use the kernel cmdline 'root' variable as a hint to decide where to read/write the U-Boot environment. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: update to git HEADDaniel Golle2022-10-181-3/+3
| | | | | | | | ee54c6b libfstools: skip JFFS2 padding on block devices Fixes config restore on the BPi R3 when using MMC storage. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* uboot-mediatek: update to U-Boot 2022.10Daniel Golle2022-10-1868-8705/+73
| | | | | | | | | Remove patches adding support for MT7621 which have been merged upsteam. Patches for MT7981 and MT7986 have been merged too, but not in time to be included in the 2022.10 release, so we have to keep carrying them until the 2023.01 release. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ethtool: update to 6.0Nick Hainke2022-10-181-2/+2
| | | | | | | Release Notes: https://lwn.net/Articles/910841/ Signed-off-by: Nick Hainke <vincent@systemli.org>
* base-files: add protocol qmi/mbim support for ucidef_set_interface()Andrey Butirsky2022-10-181-0/+8
| | | | | | | | Make it possible to setup default WAN interface for devices with built-in LTE modems, using QMI or MBIM. Signed-off-by: Andrey Butirsky <butirsky@gmail.com> Reviewed-by: Lech Perczak <lech.perczak@gmail.com>
* rtl8812au-ct: Fix compileHauke Mehrtens2022-10-181-0/+24
| | | | | | | | Replace the extern inline with a static inline. With extern inline the compiler will generate the function in all compile units including this file which breaks linking later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* ucode: update to latest Git HEADJo-Philipp Wich2022-10-181-3/+3
| | | | | | | 00af065 fs: expose `getdelim()` functionality through `fd.read()` 21ace5e lexer: fixes for regex literal parsing Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* firewall4: update to latest Git HEADJo-Philipp Wich2022-10-181-3/+3
| | | | | | 7ae5e14 fw4: gracefully handle `null` return values from `fd.read("line")` Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* uhttpd: use acme hotplugGlen Huang2022-10-182-1/+6
| | | | | | | Reload uhttpd after certificates are renewed with acme. Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Glen Huang <i@glenhuang.com>
* arm-trusted-firmware-mvebu: add Methode eDPU supportRobert Marko2022-10-171-1/+12
| | | | | | | Provide ATF support for Methode eDPU as well, this makes it easy for OpenWrt users to update the included U-boot+ATF combo. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* uboot-mvebu: add Methode eDPU supportRobert Marko2022-10-171-1/+7
| | | | | | | Add support for building for Methode eDPU board, no patches are needed as board has been upstreamed and is part of the 2022.10-rc releases. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* uboot-mvebu: update to 2022.10Robert Marko2022-10-174-101/+2
| | | | | | | | | | | | Update mvebu U-boot to 2022.10 to avoid backporting patches in order to support Methode eDPU. It also allows dropping existing patches as they are all backports. Tested-by: Andre Heider <a.heider@gmail.com> # espressobin-v3-v5-1gb-2cs Tested-by: Russell Morris <github@rkmorris.us> # espressobin-v3-v5-1gb-1cs Tested-by: Josef Schlehofer <pepe.schlehofer@gmail.com> [Turris Omnia] Signed-off-by: Robert Marko <robert.marko@sartura.hr>
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-22 09:18:06 +0000