aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* linux-firmware: add support for Marvell SDIO 8997Josef Schlehofer2020-08-242-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | For example, Turris MOX SDIO card is using Marvell (NXP) 88W8997 chip. Technical specs of 88W8997: - 28nm - 802.11 ac wave-2 It should support simultaneous dual-band 2.4 GHz and 5 GHz, but it requires to support multiSSID for one Wi-Fi card [1], which is not supported in OpenWrt, yet and if we tried to run two instances of hostapd, it didn't work well, so it's 2.4 GHz or 5 GHz. - 2x2 MU-MIMO - Bluetooth 5.1 with LE support - Unfortunately, there can be connected only 8 clients at the same time (limited by FW, however, there exists "enterprise" chip, its equal chip, it is just different that it uses different FW) Symlink is necessary as mwifiex_sdio tries to load sd8997_uapsta.bin [ 13.651182] mwifiex_sdio mmc0:0001:1: Direct firmware load for mrvl/sd8997_uapsta.bin failed with error -2 [ 13.661065] mwifiex_sdio mmc0:0001:1: Falling back to user helper [ 13.684880] firmware mrvl!sd8997_uapsta.bin: firmware_loading_store: map pages failed [ 13.695910] mwifiex_sdio mmc0:0001:1: Failed to get firmware mrvl/sd8997_uapsta.bin [ 13.703774] mwifiex_sdio mmc0:0001:1: info: _mwifiex_fw_dpc: unregister device Pali Rohár sent two patches [2] [3] into kernel to fix default firmware name for SD8997, so the symlink will not be required in the future versions of kernel, which was accepted and right now, according to my details it was backported to 5.8, 5.7 and 5.4 [1] https://bugs.openwrt.org/index.php?do=details&task_id=3243 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=00eb0cb36fad5 [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=2e1fcac52a9ea Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* linux-firmware: update to version 20200817Josef Schlehofer2020-08-241-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git log --pretty=oneline --abbrev-commit 20200619..20200817 7a30af1 (HEAD -> master, tag: 20200817, origin/master, origin/main, origin/HEAD) Merge branch 'i915-firmware-updates-08-2020' of git://anongit.freedesktop.org/drm/drm-firmware into main 923bfa6 brcm: Add brcmfmac43455-sdio.raspberrypi,3-model-a-plus.txt symlink 33e11ab rtl_bt: Update RTL8822C BT UART firmware to 0x0599_8A4F 1b81373 i915: Add DMC firmware 2.02 for RKL bdf8d7a i915: Add DMC firmware 2.08 for TGL 1bcdc9a i915: Add HuC firwmare v7.5.0 for TGL c331aa9 amdgpu: update vega20 firmware for 20.30 a434387 amdgpu: update vega12 firmware for 20.30 49e9ea8 amdgpu: update vega10 firmware for 20.30 d89e9b1 amdgpu: update renoir firmware for 20.30 373c08a amdgpu: update raven2 firmware for 20.30 69ca06e amdgpu: update raven firmware for 20.30 12042c2 amdgpu: update picasso firmware for 20.30 2c9d97a amdgpu: update navi14 firmware for 20.30 eaa3e55 amdgpu: update navi10 firmware for 20.30 9bc3789 linux-firmware: update NXP SDSD-8997 firmware image 6c79b68 Mellanox: Add new mlxsw_spectrum firmware xx.2008.1036 2b823fc (tag: 20200721) linux-firmware: Update AMD SEV firmware e33306f Merge branch 'qca_0714' of https://github.com/bgodavar/qca_bt_fw into main 1d1c80b Update to 20200629111339 version to aligh SDK. Mainly fix DFS false alarm. 69c7f0b rtl_nic: update firmware for RTL8125B f39b687 Update binary firmware for MT7663 based devices to include firmware offload feature and low power feature. 3882702 QCA: Add correct bin file for WCN3991 3d3a06f linux-firmware: Update firmware file for Intel Bluetooth AX201 b7849f7 linux-firmware: Update firmware file for Intel Bluetooth AX200 07b0375 linux-firmware: Update firmware file for Intel Bluetooth 9560 44bf1b1 linux-firmware: Update firmware file for Intel Bluetooth 9260 7169ab3 linux-firmware: wilc1000: add wilc1000 v15.4 FW b1497fc Merge https://github.com/rjliao-qca/qca-btfw into main c4e04b4 QCA: Update Bluetooth firmware for QCA6390 74ac3b5 Merge https://github.com/bgodavar/qca_wcn3991 into main 1a0c0c2 amdgpu: add UVD firmware for SI asics 24cc617 QCA: Update WCN3991 FW files Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: set WATCHDOG_CORE dependency in kmod-hwmon-sch5627Adrian Schmutzler2020-08-241-1/+3
| | | | | | | | | | | | | | | | | | For many target we have added CONFIG_WATCHDOG_CORE=y to the target config due to the following error: Package kmod-hwmon-sch5627 is missing dependencies for the following libraries: watchdog.ko However, actually the proper way appears to be setting the dependency for the kmod-hwmon-sch5627 package, as the error message demands. Do this in this patch and remove the target config entries added due to this issue. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* busybox: fix typo in MakefileDaniel Golle2020-08-231-1/+1
| | | | | | | | 'conffiiles' -> 'conffiles' Fixes: 2e06f8ae24 ("busybox: add selinux variant") Reported-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* f2fs-tools: add selinux variantPaul Spooren2020-08-231-1/+54
| | | | | | | This variant is build with `libselinux` and required to set labels during runtime. Signed-off-by: Paul Spooren <mail@aparcar.org>
* busybox: add selinux variantPaul Spooren2020-08-233-5/+45
| | | | | | | This commit adds a `selinux` variant which comes with with a number of SELinux applets and also SELinux label support. Signed-off-by: Paul Spooren <mail@aparcar.org>
* nat46: update to latest git HEADHans Dedecker2020-08-231-2/+2
| | | | | | 362640b nat46-module: fix compilation with kernel 5.6 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* curl: disable zstd supportHans Dedecker2020-08-231-1/+2
| | | | | | | | | | Fixes package libcurl build issue : Package libcurl is missing dependencies for the following libraries: libzstd.so.1 Suggested-by: Syrone Wong <wong.syrone@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* mt76: update to the latest versionFelix Fietkau2020-08-221-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | 8027c7d95274 mt76: mt7615: fix reading airtime statistics 3743e7c904de mt76: mt7915: optimize mt7915_mac_sta_poll d2fe5e8330c6 mt76: mt7915: fix variable initialization in sta poll 692065b4c9db mt76: mt7915: only enable hw amsdu for AP and station b54157df7c27 mt7615: update firmware to version 20200814 888990e159d2 mt76: use threaded NAPI 3a3306e408f2 mt76: mt7915: add 802.11 encap offload support 795b772cd392 mt76: mt7915: add encap offload for 4-address mode stations 55d79ab7fa23 mt76: dma: update q->queued immediately on cleanup 23dbd64d6324 mt76: mt7915: schedule tx tasklet in mt7915_mac_tx_free 5cf34cda70af mt76: mt7915: significantly reduce interrupt load 87a69429069f mt76: add utility functions for deferring work to a kernel thread 2f1318a06d0a mt76: convert from tx tasklet to tx worker thread 72f0979566be mt76: mt7915: add support for accessing mapped registers via bus ops f9ce5c776c9a mt76: use ieee80211_rx_list to pass frames to the network stack as a batch 25dd8bdae3bf mt76: mt7615: significantly reduce interrupt load 7c5445dec812 mt76: mt7615: release mutex in mt7615_reset_test_set e68c3e254822 mt76: mt7663s: use NULL instead of 0 in sdio code 4368380e20e7 mt76: mt7663s: fix resume failure bea386f27914 mt76: mt7663s: fix unable to handle kernel paging request b8780c44c716 mt76: mt7615: fix possible memory leak in mt7615_tm_set_tx_power 37a1c7ed6796 mt76: mt7615: fix a possible NULL pointer dereference in mt7615_pm_wake_work 8c7c1a207d25 mt76: fix a possible NULL pointer dereference in mt76_testmode_dump Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: rework encapsulation offload supportFelix Fietkau2020-08-2214-3/+1921
| | | | | | Fix a number of deficiencies in the existing API Signed-off-by: Felix Fietkau <nbd@nbd.name>
* curl: update to version 7.72.0Josef Schlehofer2020-08-211-2/+2
| | | | | | | Changes in this version can be found here: https://curl.haxx.se/changes.html#7_72_0 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* mac80211: add missing return code checks in AQL improvementsFelix Fietkau2020-08-212-6/+8
| | | | | | Fixes throughput issues with some drivers (e.g. ath10k) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: wpan: Add kmod-ca8210Hauke Mehrtens2020-08-211-0/+16
| | | | | | This device is found on the pistachio marduk board. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* kernel: wpan: Add missing AUTOLOAD to load kernel moduleHauke Mehrtens2020-08-211-0/+3
| | | | | | | These kernel modules were not loaded automatically, fix this by adding the AUTOLOAD definition. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* dnsmasq: abort dhcp_check on interface stateDavid Bauer2020-08-201-2/+2
| | | | | | | | | Abort the dhcp-check based on the interface instead of the carrier state. In cases where the interface is up but the carrier is down, netifd won't cause a dnsmasq reload, thus dhcp won't become active on this interface. Signed-off-by: David Bauer <mail@david-bauer.net>
* map: rename type to maptype (FS#3287)Remi NGUYEN VAN2020-08-192-14/+19
| | | | | | | | | | | | | | | | "type" is already used as a common option for all protocols types, so using the same option name for the map type makes the configuration ambiguous. Luci in particular adds controls for both options and sees errors when reading the resulting configuration. Use "maptype" instead, but still fallback to "type" if "maptype" is not set. This allows configurations to migrate without breaking old configurations. This addresses FS#3287. Signed-off-by: Remi NGUYEN VAN <remi.nguyenvan+openwrt@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* ltq-dsl-base: remove useless echos in lantiq_dsl.shAdrian Schmutzler2020-08-172-3/+3
| | | | | | | | The is no reason to catch the output by $() and then echo it again. Remove the useless echos. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* map: add a legacymap optionRemi NGUYEN VAN2020-08-152-8/+6
| | | | | | | | | | | | | | The legacy map version based on the IPv6 Interface Identifier in draft-ietf-softwire-map-03 was typically used by uncommenting the LEGACY variable in the map.sh file, which is not ideal. A proper configuration option is needed instead. The IPv6 Interface Identifier format described in the draft was eventually changed in RFC7597, but is still used by some major ISPs, including in Japan. Signed-off-by: Remi NGUYEN VAN <remi.nguyenvan+openwrt@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* dropbear: allow disabling support for scpRui Salvaterra2020-08-152-4/+10
| | | | | | | | | | | | | If not needed, disabling scp allows for a nice size reduction. Dropbear executable size comparison: 153621 bytes (baseline) 133077 bytes (without scp) In other words, we trim a total of 20544 bytes. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* ath79: add support for ALLNET ALL-WAP02860ACTomasz Maciej Nowak2020-08-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ALLNET ALL-WAP02860AC is a dual-band wireless access point. Specification SoC: Qualcomm Atheros QCA9558 RAM: 128 MB DDR2 Flash: 16 MB SPI NOR WIFI: 2.4 GHz 3T3R integrated 5 GHz 3T3R QCA9880 Mini PCIe card Ethernet: 1x 10/100/1000 Mbps AR8035-A, PoE capable (802.3at) LEDS: 5x, which four are GPIO controlled Buttons: 1x GPIO controlled UART: 4 pin header near Mini PCIe card, starting count from white triangle on PCB 1. VCC 3.3V, 2. GND, 3. TX, 4. RX baud: 115200, parity: none, flow control: none MAC addresses Calibration data does not contain valid MAC addresses. The calculated MAC addresses are chosen in accordance with OEM firmware. Because of: a) constrained environment (SNMP) when connecting through Telnet or SSH, b) hard-coded kernel and rootfs sizes, c) checksum verification of kerenel and rootfs images in bootloder, creating factory image accepted by OEM web interface is difficult, therefore, to install OpenWrt on this device UART connection is needed. The teardown is simple, unscrew four screws to disassemble the casing, plus two screws to separate mainboard from the casing. Before flashing, be sure to have a copy of factory firmware, in case You wish to revert to original firmware. Installation 1. Prepare TFTP server with OpenWrt initramfs-kernel image. 2. Connect to LAN port. 3. Connect to UART port. 4. Power on the device and when prompted to stop autoboot, hit any key. 5. Alter U-Boot environment with following commands: setenv failsafe_boot bootm 0x9f0a0000 saveenv 6. Adjust "ipaddr" and "serverip" addresses in U-Boot environment, use 'setenv' to do that, then run following commands: tftpboot 0x81000000 <openwrt_initramfs-kernel_image_name> bootm 0x81000000 7. Wait about 1 minute for OpenWrt to boot. 8. Transfer OpenWrt sysupgrade image to /tmp directory and flash it with: sysupgrade -n /tmp/<openwrt_sysupgrade_image_name> 9. After flashing, the access point will reboot to OpenWrt. Wait few minutes, until the Power LED stops blinking, then it's ready for configuration. Signed-off-by: Tomasz Maciej Nowak <tomek_n@o2.pl> [add MAC address comment to commit message] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mac80211: add missing backports for building with 4.14 kernelsFelix Fietkau2020-08-142-0/+54
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libselinux: fix Makefile styleDaniel Golle2020-08-141-1/+1
| | | | | | Also fix line order in libselinux Makefile. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libsepol: fix Makefile styleDaniel Golle2020-08-141-3/+2
| | | | | | Fix line ordering (cosmetic). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* pcre: clean up Makefile line orderDaniel Golle2020-08-141-4/+2
| | | | | | | | The most recent patch added add lines in one block instead of in the appropriate places to keep Makefiles in consistent style. Fix that. Fixes: ff02e1561f ("pcre: add host variant of libpcre") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* pcre: add host variant of libpcreThomas Petazzoni2020-08-141-0/+12
| | | | | | This is needed to build the host variant of libselinux. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* libselinux: fix build on non-Linux systemsFelix Fietkau2020-08-131-0/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libsepol: fix build on non-Linux systemsFelix Fietkau2020-08-131-1/+2
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: add AQL improvementsFelix Fietkau2020-08-133-0/+403
| | | | | | | Add AQL support for HE drivers. Improve assumed aggregation length based on tx rate Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2020-08-131-3/+3
| | | | | | | 34aed01ca865 mt76: mt7915: use ieee80211_free_txskb to free tx skbs efc8669db5f9 mt76: mt7915: fix max_mpdu_size field for A-MSDU Signed-off-by: Felix Fietkau <nbd@nbd.name>
* libselinux: don't depend on kernel config symbolsDaniel Golle2020-08-131-1/+1
| | | | | | | | Dependencies are meant to express actual run-time dependencies and strictly speaking, libselinux can be build and used on kernels without SELinux (not in a very meaningful way, but never mind). Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: remove duplicate confguration menuDaniel Golle2020-08-131-2/+0
| | | | | Fixes: 962e73c1a4 ("procd: add selinux variant") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iproute2: disable SELinux for nowDaniel Golle2020-08-131-0/+11
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* musl-fts: import from packages feedDaniel Golle2020-08-131-0/+60
| | | | | | | libselinux requires musl-fts to build with musl. Import it from packages feed as well. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* pcre: import from packages feedsDaniel Golle2020-08-132-0/+130
| | | | | | | libselinux require pcre, import to to core so it can build without packages feeds. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* procd: add selinux variantPaul Spooren2020-08-131-7/+31
| | | | | | | | This commit adds a `selinux` variant to `procd` allowing to load an SELinux policy at boot. Signed-off-by: Paul Spooren <mail@aparcar.org> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* libselinux: add new packageThomas Petazzoni2020-08-131-0/+79
| | | | | | Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [rebase, update to 3.1] Signed-off-by: W. Michael Petullo <mike@flyn.org>
* libsepol: add new packageThomas Petazzoni2020-08-131-0/+66
| | | | | | Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> [rebase, update to 3.1] Signed-off-by: W. Michael Petullo <mike@flyn.org>
* kernel: usb: move phy-qcom-ipq806x-usb to ipq806x modules.mkAnsuel Smith2020-08-131-18/+0
| | | | | | | | | | This driver is only used by ipq806x SoCs. Move it there and drop dependency from ipq40xx since it's not used anywere. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [rebase on changes to previous patches] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
* ipq806x: replace phy dwc3 patch with upstream versionAnsuel Smith2020-08-131-7/+7
| | | | | | | | | | | | - Replace dwc3 phy patch with upstream version - Rework the dts to use the upstream bindings - Update changed config flags - Rename module to reflect config name Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> [fix qcom,tx-deamp_3_5db typo, refresh patches, rename kmod] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Tested-by: Paul Blazejowski <paulb@blazebox.homeip.net> [R7800]
* dropbear: fix ssh alternative when dbclient isn't builtRui Salvaterra2020-08-121-3/+3
| | | | | | | The ssh symlink was still being created even when dbclient was disabled in the build configuration. Fix this annoyance. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* mt76: update to the latest versionFelix Fietkau2020-08-121-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 8d9a62e4def7 mt76: mt7915: fix crash on tx rate report for invalid stations 825343467df4 mt76: fix double DMA unmap of the first buffer on 7615/7915 99804560372b mt76: mt7615: register ext_phy if DBDC is detected 93407be934b2 mt76: mt7615: move drv_own/fw_own in mt7615_mcu_ops e7774de844e8 mt76: mt7663s: move drv_own/fw_own in mt7615_mcu_ops a5602514ab03 mt76: mt7615: hold mt76 lock queueing wd in mt7615_queue_key_update 5c42061ce181 mt76: do not inject packets if MT76_STATE_PM is set ae4757a0ae90 mt76: mt7615: reschedule runtime-pm receiving a tx interrupt c4544d1e8a1a mt76: mt76s: fix oom in mt76s_tx_queue_skb_raw dc73103874cc mt76: mt76s: move tx processing in a dedicated wq c828c84cb134 mt76: mt7663s: move rx processing in txrx wq 2b34f2f6b0ef mt76: mt76s: move status processing in txrx wq f957b050d848 mt76: mt76s: move tx/rx processing in 2 separate works 6fe964295bd9 mt76: mt76s: get rid of unused variable 43d6127d8851 mt76: mt7915: enable U-APSD on AP side 58774b605f1c mt76: set interrupt mask register to 0 before requesting irq 06f722d8046c mt76: mt7915: clean up and fix interrupt masking in the irq handler 2fbd6baac103 mt76: mt7615: only clear unmasked interrupts in irq tasklet 5ea8b6187da2 mt76: mt76x02: clean up and fix interrupt masking in the irq handler f2e71f0c1b7e mt76: mt7615: do not do any work in napi poll after calling napi_complete_done() 1eb94624bb12 mt76: mt7915: do not do any work in napi poll after calling napi_complete_done() 5e0c587b9ac1 mt76: mt7915: clean up station stats polling and rate control update 9ab20dfbf7b1 mt76: mt7915: increase tx retry count fa69dd96f9c0 mt76: mt7915: enable offloading of sequence number assignment 9816f9812adb mt76: move mt76_check_agg_ssn to driver tx_prepare calls ad90170b0af9 mt76: mt7615: remove mtxq->agg_ssn assignment 335cd51be4c6 mt76: mt7915: simplify aggregation session check 21f7734cbb49 mt76: mt7915: add missing flags in WMM parameter settings 21182f90d947 mt76: mt7915: add Tx A-MSDU offloading support 27670514328f mt76: mt7615: use v1 MCU API on MT7615 to fix issues with adding/removing stations Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct-firmware: update firmware imagesMichael Yartys2020-08-121-30/+30
| | | | | | | | | | | Not a large change from last time, but should fix at least one rare wave-2 crash. The htt-mgt-community builds are trimmed for supporting lots of stations (typically 150+ stations per radio). Tested on Netgear R7800. Signed-off-by: Michael Yartys <michael.yartys@gmail.com> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* treewide: bump PKG_RELEASE after replacing `which`Adrian Schmutzler2020-08-123-3/+3
| | | | | | | | | Bump PKG_RELEASE for the affected packages as replacing "which" by "command -v" represents a content change. Fixes: 1fdf6b745cc3 ("treewide: replace `which` with `command -v`") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: replace `which` with `command -v`Paul Spooren2020-08-123-5/+5
| | | | | | | | | | | | | | | | | Fix shellcheck SC2230 > which is non-standard. Use builtin 'command -v' instead. Using `command -v` is POSIX compliant while `which` is not. Also to mention, `command -v` is a shell builtin whereas `which` is a separate busybox applet. Once applied to everything concerning OpenWrt we can disable the busybox feature `which` and save 3.8kB. Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Paul Spooren <mail@aparcar.org> [also replace cases in zram-swap] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* busybox: delete redundant patchMagnus Kroken2020-08-122-14/+1
| | | | | | | | | | This problem has been fixed in upstream commit 6b6a3d9339f1c08efaa18a7fb7357e20b48bdc95. This patch now (harmlessly) adds the same definition a second time. Signed-off-by: Magnus Kroken <mkroken@gmail.com> [bump PKG_RELEASE] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* uboot-mediatek: resync patches with upstreamDavid Woodhouse2020-08-124-23/+49
| | | | | | | Now that my patches have been merged into upstream U-Boot, resync the cosmetic changes and the commit IDs from the final commits. Signed-off-by: David Woodhouse <dwmw2@infradead.org>
* libjson-c: fix pkgconfig fileRosen Penev2020-08-111-9/+10
| | | | | | | | | | | | | | The pkgconfig file references the host directories, not the openwrt ones. Used SED to fix as is done elsewhere. Removed CMAKE_INSTALL as a result. Removed now pointless CFLAGS. Added PKG_BUILD_PARALLEL for faster compilation. Various rearrangements for consistency between packages. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* ppp: update to latest git HEADHans Dedecker2020-08-115-9/+9
| | | | | | | | | | | | 677aa53 Fix -W option for pppoe-discovery utility (#157) 115c419 Accept Malformed Windows Success Message (#156) 5bdb148 pppd: Add documentation of stop-bits option to pppd man page (#154) 2a7981f Add ipv6cp-accept-remote option 0678d3b pppd: Fix the default value for ipv6cp-accept-local to false Refresh patches Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* bintuils: Pack libctf-nobfd.so in additionHauke Mehrtens2020-08-101-2/+3
| | | | | | | | | | readelf is linked against this library on MIPS64BE This fixes a build problem on MIPS64BE. In addition also explicitly activate it in the configure command. Fixes: 60f595daab45 ("binutils: update to version 2.34") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.8Hauke Mehrtens2020-08-1010-374/+17
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 08:52:54 +0000