aboutsummaryrefslogtreecommitdiffstats
path: root/package
Commit message (Collapse)AuthorAgeFilesLines
* libubox: update to the latest versionFelix Fietkau2018-07-071-3/+3
| | | | | | 3c1b33b utils: add const_* byteswapping functions Signed-off-by: Felix Fietkau <nbd@nbd.name>
* firmware: amd64-microcode: update to 20180524Zoltan HERPAI2018-07-071-2/+2
| | | | | | | | | | | | | * New microcode update packages from AMD upstream: + New Microcodes: sig 0x00800f12, patch id 0x08001227, 2018-02-09 + Updated Microcodes: sig 0x00600f12, patch id 0x0600063e, 2018-02-07 sig 0x00600f20, patch id 0x06000852, 2018-02-06 * Adds Spectre v2 (CVE-2017-5715) microcode-based mitigation support, plus other unspecified fixes/updates. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
* kmod-sched-cake: bump to latest 20180706Kevin Darbyshire-Bryant2018-07-071-3/+3
| | | | | | | Fixes a potential infinite loop bug when in unlimited (ie not using built in shaper) mode. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* elfutils: bump to 0.173Luiz Angelo Daros de Luca2018-07-047-351/+149
| | | | | | | | | - Removed hacks to use standalone argp as upstream now detects it nicely. - As we are already installing files, use files from PKG_INSTALL_DIR and not PKG_BUILD_DIR - Only changes Makefile.am as PKG_FIXUP:=autoreconf is in use Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
* dnsmasq: bump to latest patches on 2.80rc2Kevin Darbyshire-Bryant2018-07-0319-11/+406
| | | | | | | | | | | | | | | Refresh patches and backport upstream to current HEAD: a997ca0 Fix sometimes missing DNSSEC RRs when DNSSEC validation not enabled. 51e4eee Fix address-dependent domains for IPv6. 05ff659 Fix stupid infinite loop introduced by preceding commit. db0f488 Handle some corner cases in RA contructed interfaces with addresses changing interface. 7dcca6c Warn about the impact of cache-size on performance. 090856c Allow zone transfer in authoritative mode whenever auth-peer is specified. cc5cc8f Sane error message when pcap file header is wrong. c488b68 Handle standard and contructed dhcp-ranges on the same interface. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kmod-sched-cake: bump to latest cakeKevin Darbyshire-Bryant2018-07-031-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This bumps to the latest & possibly greatest cake, sadly it's still inedible but from an SQM point of view quite tasty :-) Main tweaks since previous bump, improved ack_filter, some extra stats, support for 64bit netlink parameters (higher rates/byte counters) 0520a6c Fix NAT option handling 8da93e1 Make sure we always call qdisc_watchdog_init() in cake_init() f65daf6 Fix mismatched parenthesis 51d4ab3 Change flag handling to be safe even when mixing with non-eligible ACKs f2ea091 ack_filter: protect DCTCP with stricter filtering of ECE marks 28b4560 ACK filter: Handle wrapping sequence numbers and DSACKs 73f62d9 Use the right PAD attribute for options 5969c14 Use 32 for tin backlog e289f31 Move all the u64 netlink attributes together 36180a0 Check ACK seqno before parsing SACKs 91bbc01 Merge branch 'mine' into cobalt 58c55ec Rework SACK check to compare the ranges of two SACKs 9a5d593 ack_filter: Add proper handling of SACKs eca95d4 ack_filter: short-circuit TCP flag check d50a246 compat: backport some ktime functions 7b7ad11 compat: define tcpopt_fastopen for pre-4.1 kernels ca54cdb Fix ktime compare 9d7dcc0 ack filter: Parse TCP options and only drop safe ones b119882 Return EOPNOTSUPP on NAT option if conntrack is not available 842d7f0 Don't try to pad stats with tin_stats padding bd46dc2 Use 64-bit divide helper 8e41bf0 Make sure we never drop SACKs when filtering ACKs 66e5d60 Avoid comparing ktime_t to scalar values 7fab017 Actually commit the ktime_t changes fca6d13 Switch to ktime_t and get rid of cobalt.h 6f7e5af Can't use do_div with 64-bit divisors Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iproute2: tc: update support for cakeKevin Darbyshire-Bryant2018-07-031-28/+83
| | | | | | | | | Bump iproute2/tc support of cake. Add support for cake's change to u64 attribute passing for certain attributes (rate & byte counts) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* uhttpd: update to latest Git headJo-Philipp Wich2018-07-031-3/+3
| | | | | | | | | | db86175 lua: honour size argument in recv() function d3b9560 utils: add uh_htmlescape() helper 8109b95 file: escape strings in HTML output 393b59e proc: expose HTTP Origin header in process environment 796d42b client: flush buffered SSL output when tearing down client ustream Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ebtables: update to latest git 2018-06-27Hans Dedecker2018-07-023-5/+5
| | | | | | | 48cff25 build: drop install -o/-g root 53d7e7a extensions: ebt_string: take action if snprintf discards data Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* fw3: update to latest git HEADJohn Crispin2018-07-021-3/+3
| | | | | | 72684e5 firewall3: Fix GCC8 warnings by replacing sprintf with snprintf Signed-off-by: John Crispin <john@phrozen.org>
* samba36: Disable external libtdb and libteventRosen Penev2018-07-021-1/+3
| | | | | | | This was causing issues recently as samba36 is not API compatible with the libtdb in the packages repo. It shouldn't be using it anyway. Nor tevent. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* usbutils: Switch to Fedora usbutilsRosen Penev2018-07-021-5/+5
| | | | | | | The Gentoo GitHub mirror went down. One benefit of Fedora's usb.ids file is that it's versioned. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* swconfig: swlib_map_settings(): change return type to voidAlexander Couzens2018-06-291-1/+1
| | | | | | | | The return value of the function isn't used anywhere. Fixes missing return value, CID 1329717. Found-by: Coverity Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* swconfig: fix un-initialized return valueAlexander Couzens2018-06-291-2/+3
| | | | | | | Fix CID 1330844 Found-by: Coverity Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* qos-scripts: fix uci callback handlingTony Ambardar2018-06-283-29/+29
| | | | | | | | | | | | | | | | | The previous callback code was fragile, dependent on some UCI callback bugs and side-effects now fixed in master commit 73d8a6ab. Update scripts to use callbacks where appropriate and necessary, while using normal UCI config parsing for all else. This results in smaller, simpler, more robust code. Use callbacks in generate.sh to only process 'interface' defaults and the varying entries for 'reclassify', 'default' and 'classify' sections. Also switch qos-stat to use non-callback UCI handling. The current changes work independently of 73d8a6ab (i.e. both before and after), and are consistent with UCI config parsing documentation. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* uboot-kirkwood: fix malformed boot configurationAlberto Bursi2018-06-278-8/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With current uboot default configuration the bootloader will fail to start the OpenWrt firmware with the following error: ----- unexpected character 'b' at the end of partition Error initializing mtdparts! incorrect device type in ubi Partition ubi not found! Error, no UBI device/partition selected! Wrong Image Format for bootm command Error occured, error code = 112 ----- If the uboot configuration is examined with printenv I can see that mdtparts line (on a nsa310) is wrong: ----- mtdparts=mtdparts=orion_nand:0x0c0000(uboot), 0x80000(uboot_env),0x7ec0000(ubi)bootargs_root= ---- The "bootargs_root=" that was appended to it should not be there. Fix the issue by adding a \0 line terminator at the end of affected lines, mimicking what is also done by uboot upstream. This issue was detected and confirmed on a nsa310, nsa325 and a pogoplug v4, but it's not hardware-specific, so apply the same fix to other devices as well. Note that the issue is with the uboot's integrated boot configuration, which is not used unless the uboot configuration in flash is unavailable (erased or corrupted), which happens only on first time installation, or if the user deletes the uboot configuration when upgrading uboot. People just upgrading from an older uboot without erasing their previous uboot configuration stored in flash would not have noticed this issue. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* uboot-kirkwood: fix whitespacesAlberto Bursi2018-06-278-29/+29
| | | | | | remove whitespaces from the patches Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* base-files: add menuconfig option for HOME_URLMathias Kresin2018-06-272-1/+7
| | | | | | | | | | Add a menuconfig option to set the HOME_URL exposed in /usr/lib/os-release independent from the LEDE_DEVICE_MANUFACTURER_URL. Fixes: FS#1123 Signed-off-by: Mathias Kresin <dev@kresin.me>
* wireguard: bump to 0.0.20180625Kevin Darbyshire-Bryant2018-06-261-2/+2
| | | | | | | | | | | | | | | | | | | | dfd9827 version: bump snapshot 88729f0 wg-quick: android: prevent outgoing handshake packets from being dropped 1bb9daf compat: more robust ktime backport 68441fb global: use fast boottime instead of normal boottime d0bd6dc global: use ktime boottime instead of jiffies 18822b8 tools: fix misspelling of strchrnul in comment 0f8718b manpages: eliminate whitespace at the end of the line 590c410 global: fix a few typos bb76804 simd: add missing header 7e88174 poly1305: give linker the correct constant data section size fd8dfd3 main: test poly1305 before chacha20poly1305 c754c59 receive: don't toggle bh Compile-tested-for: ath79 Archer C7 v2 Run-tested-on: ath79 Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* mac80211: make rtl8xxxu buils againJohn Crispin2018-06-261-0/+38
| | | | | | we only wanted to drop rtl8xxxue support Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: rtl8xxxu: drop support patchesJohn Crispin2018-06-2658-3569/+0
| | | | | | | | | After a very enlightening but unfortunately far too short exchange with Jes we mutually agreed to drop the patches. They are unfortunately not ready yet. Acked-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: John Crispin <john@phrozen.org>
* odhcpd: update to latest git HEADHans Dedecker2018-06-261-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | 81a281e dhcpv6-ia: fix border assignment size setting a2ffc59 dhcpv6-ia: fix status code for not on link IAs 5b087a6 dhcpv6-ia: improve error checking in assign_pd() c9114a1 config: fix wrong assignment bb8470f dhcpv4: delay forced renew transaction start 62a1b09 dhcpv4: fix DHCP address space logic d5726ff dhcpv4: improve logging when sending DHCP messages 9484351 odhcpd: call handle_error when socket error can be retrieved c45e2eb dhcpv6: fix out of bounds write in handle_nested_message() c2ff5af dhcpv6-ia: log renew messages as well 676eb38 router: fix possible segfault in send_router_advert() 392701f odhcpd: fix passing possible negative parameter 029123b treewide: switch to C-code style comments 6b79748 router: improve error checking 12e21bc netlink: fix incorrect sizeof argument d7aa414 dhcpv6: improve error checking in dhcpv6_setup_interface() 373495a ubus: fix invalid ipv6-prefix json 79d5e6f ndp: improve error checking d834ae3 dhcpv4: fix error checking in dhcpv4_setup_interface() f2aa383 dhcpv4: fix out of bound access in dhcpv4_put 4591b36 dhcpv4: improve error checking in dhcpv4_setup_interface() 4983ee5 odhcpd: fix strncpy bounds Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* package/utils/e2fsprogs: Update to 1.44.2Daniel Engberg2018-06-261-2/+2
| | | | | | Update e2fsprogs to 1.44.2 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* ipq40xx: add support for the ZyXEL NBG6617Christian Lamparter2018-06-263-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for ZyXEL NBG6617 Hardware highlights: SOC: IPQ4018 / QCA Dakota CPU: Quad-Core ARMv7 Processor rev 5 (v7l) Cortex-A7 DRAM: 256 MiB DDR3L-1600/1866 Nanya NT5CC128M16IP-DI @ 537 MHz NOR: 32 MiB Macronix MX25L25635F ETH: Qualcomm Atheros QCA8075 Gigabit Switch (4 x LAN, 1 x WAN) USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11bgn 2:2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11a/n/ac 2:2x2 INPUT: RESET Button, WIFI/Rfkill Togglebutton, WPS Button LEDS: Power, WAN, LAN 1-4, WLAN 2.4GHz, WLAN 5GHz, USB, WPS Serial: WARNING: The serial port needs a TTL/RS-232 3.3v level converter! The Serial setting is 115200-8-N-1. The 1x4 .1" header comes pre-soldered. Pinout: 1. 3v3 (Label printed on the PCB), 2. RX, 3. GND, 4. TX first install / debricking / restore stock: 0. Have a PC running a tftp-server @ 192.168.1.99/24 1. connect the PC to any LAN-Ports 2. put the openwrt...-factory.bin (or V1.00(ABCT.X).bin for stock) file into the tftp-server root directory and rename it to just "ras.bin". 3. power-cycle the router and hold down the the WPS button (for 30sek) 4. Wait (for a long time - the serial console provides some progress reports. The u-boot says it best: "Please be patient". 5. Once the power LED starts to flashes slowly and the USB + WPS LEDs flashes fast at the same time. You have to reboot the device and it should then come right up. Installation via Web-UI: 0. Connect a PC to the powered-on router. It will assign your PC a IP-address via DHCP 1. Access the Web-UI at 192.168.1.1 (Default Passwort: 1234) 2. Go to the "Expert Mode" 3. Under "Maintenance", select "Firmware-Upgrade" 4. Upload the OpenWRT factory image 5. Wait for the Device to finish. It will reboot into OpenWRT without any additional actions needed. To open the ZyXEL NBG6617: 0. remove the four rubber feet glued on the backside 1. remove the four philips screws and pry open the top cover (by applying force between the plastic top housing from the backside/lan-port side) Access the real u-boot shell: ZyXEL uses a proprietary loader/shell on top of u-boot: "ZyXEL zloader v2.02" When the device is starting up, the user can enter the the loader shell by simply pressing a key within the 3 seconds once the following string appears on the serial console: | Hit any key to stop autoboot: 3 The user is then dropped to a locked shell. |NBG6617> HELP |ATEN x[,y] set BootExtension Debug Flag (y=password) |ATSE x show the seed of password generator |ATSH dump manufacturer related data in ROM |ATRT [x,y,z,u] RAM read/write test (x=level, y=start addr, z=end addr, u=iterations) |ATGO boot up whole system |ATUR x upgrade RAS image (filename) |NBG6617> In order to escape/unlock a password challenge has to be passed. Note: the value is dynamic! you have to calculate your own! First use ATSE $MODELNAME (MODELNAME is the hostname in u-boot env) to get the challange value/seed. |NBG6617> ATSE NBG6617 |012345678901 This seed/value can be converted to the password with the help of this bash script (Thanks to http://www.adslayuda.com/Zyxel650-9.html authors): - tool.sh - ror32() { echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) )) } v="0x$1" a="0x${v:2:6}" b=$(( $a + 0x10F0A563)) c=$(( 0x${v:12:14} & 7 )) p=$(( $(ror32 $b $c) ^ $a )) printf "ATEN 1,%X\n" $p - end of tool.sh - |# bash ./tool.sh 012345678901 | |ATEN 1,879C711 copy and paste the result into the shell to unlock zloader. |NBG6617> ATEN 1,0046B0017430 If the entered code was correct the shell will change to use the ATGU command to enter the real u-boot shell. |NBG6617> ATGU |NBG6617# Co-authored-by: David Bauer <mail@david-bauer.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: David Bauer <mail@david-bauer.net>
* iperf3: update to 3.6Philip Prindeville2018-06-261-3/+3
| | | | Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* netfilter: add bpf match supportAlin Nastac2018-06-262-0/+2
| | | | | | | | | Add xt_bpf modules to {kmod-ipt,iptables-mod}-filter. Match using Linux Socket Filter. Expects a BPF program in decimal format. This is the format generated by the nfbpf_compile utility. Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* mac80211: enable ath10k LED support by defaultStijn Tintel2018-06-251-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | Commit 61d57a2f88b90ba951012e66c7c6fae9234c97b4 adds ath10k LED support, but doesn't add an option to actually enable it. After enabling this option, a LED named ath10k-phy0 appears in sysfs, and a trigger can be assigned to it. Since 60deb3cdef4a the default set trigger is the tpt one. Enable it by default, as most devices using ath10k chips shouldn't be severely space-constrained. There are likely many devices that can benefit from having it enabled, like my testing device. Before: text data bss dec hex filename 245311 8899 16 254226 3e112 ath10k_core.ko After: text data bss dec hex filename 245979 8899 16 254894 3e3ae ath10k_core.ko Tested on a D-Link DAP-2695-A1 (ar71xx). Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mac80211: ath10k: use tpt LED trigger by defaultMathias Kresin2018-06-251-0/+53
| | | | | | | | Use the tpt LED trigger for each created phy led. Ths way LEDs attached to the ath10k GPIO pins are indicating the phy status and blink on traffic. Signed-off-by: Mathias Kresin <dev@kresin.me>
* dropbear: let opkg manage symlinks of ssh, scpYousong Zhou2018-06-251-3/+5
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* iptables: set nonshared flagJohn Crispin2018-06-221-0/+1
| | | | | | this makes sure that offloading support is properly included for v4.14 targets. Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: drop 355-ath9k-limit-retries-for-powersave-response-frames.patchJohn Crispin2018-06-2219-243/+157
| | | | | | several people reported this bug to be causing drop out issues Signed-off-by: John Crispin <john@phrozen.org>
* mac80211: ath10k fix vht160 firmware crashAnsuel Smith2018-06-222-0/+182
| | | | | | When the 160mhz width is selected the ath10k firmware crash. This fix this problem. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* mac80211: ath10k add leds supportAnsuel Smith2018-06-221-0/+617
| | | | | | This adds support for leds handled by the wireless chipset. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* wwan: Add support for Gemalto Cinterion cellular modulesDavid Thornley2018-06-224-1/+17
| | | | | | | | | | | | | Includes specific support for PH8(1e2d-0053) / ELS61(1e2d-005b) modules. Note for ELS61, the serial driver changes from serial option(ttyUSB) to usb-cdc (ttyACM). Two additional fixes in this commit resolve issues with ttyACM devices: - * wwan.sh - sys-fs has a subdirectory indirection (*/tty/ttyACMx) which was not handled properly * wwan.usb - dependent scripts were not included, so this never actually called proto_set_available for example (and relied on inadvertent call for ttyUSB case) Signed-off-by: David Thornley <david.thornley@touchstargroup.com>
* busybox: rename udhcpc-remove-code-which-requires-server-ID-to-be-on patchHans Dedecker2018-06-211-0/+0
| | | | | | | Move udhcpc-remove-code-which-requires-server-ID-to-be-on patch from 500 to 400 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* busybox: udhcpc: replace udhcpc_no_msg_dontroute patch by upstream fixHans Dedecker2018-06-213-12/+118
| | | | | | | | Replace 204-udhcpc_no_msg_dontroute patch by the upstream busybox fix which removes the code which requires the server ID to be on local network Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* kernel: define THERMAL_EMERGENCY_POWEROFF_DELAY_MSStijn Tintel2018-06-211-0/+1
| | | | | | | | Enabling CONFIG_ATH10K_THERMAL on targets that don't have CONFIG_THERMAL enabled in their kernel config causes build to fail due to missing symbol THERMAL_EMERGENCY_POWEROFF_DELAY_MS. Add it to kmod-thermal. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ltq-vdsl-fw: fix ltq-vdsl-vr9-vectoring-fw-installer package installDaniel Golle2018-06-211-1/+1
| | | | | | | The package is not being generated otherwise, which is fatal because it is part of the subtargets default package set... Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update to the latest versionFelix Fietkau2018-06-211-3/+3
| | | | | | 1d4ca10 mt76x2: track rssi for gain adjustment per station Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wireguard: bump to 0.0.20180620Kevin Darbyshire-Bryant2018-06-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | 0bc4230 version: bump snapshot ed04799 poly1305: add missing string.h header cbd4e34 compat: use stabler lkml links caa718c ratelimiter: do not allow concurrent init and uninit 894ddae ratelimiter: mitigate reference underflow 0a8a62c receive: drop handshake packets if rng is not initialized cad9e52 noise: wait for crng before taking locks 83c0690 netlink: maintain static_identity lock over entire private key update 0913f1c noise: take locks for ss precomputation 073f31a qemu: bump default kernel bec4c48 wg-quick: android: don't forget to free compiled regexes 7ce2ef3 wg-quick: android: disable roaming to v6 networks when v4 is specified 9132be4 dns-hatchet: apply resolv.conf's selinux context to new resolv.conf 41a5747 simd: no need to restore fpu state when no preemption 6d7f0b0 simd: encapsulate fpu amortization into nice functions f8b57d5 queueing: re-enable preemption periodically to lower latency b7b193f queueing: remove useless spinlocks on sc 5bb62fe tools: getentropy requires 10.12 4e9f120 chacha20poly1305: use slow crypto on -rt kernels on arm too Compiled-for: ar71xx, lantiq Run-tested-on: ar71xx Archer C7 v2 & lantiq HH5a Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* odhcp6c: update to latest git HEADHans Dedecker2018-06-201-4/+4
| | | | | | b99c1f6 odhcp6c: remove len check in option parsing handle Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ethtool: Update to 4.17Robert Marko2018-06-201-2/+2
| | | | | | | | | | | | | | | | Tested on 8devices Jalapeno(ipq40xx) Introduces following changes * Fix: In ethtool.8, remove superfluous and incorrect \ * Fix: fix uninitialized return value * Fix: fix RING_VF assignment * Fix: remove unused global variable * Fix: several fixes in do_gregs() * Fix: correctly free hkey when get_stringset() fails * Fix: remove unreachable code * Fix: fix stack clash in do_get_phy_tunable and do_set_phy_tunable * Feature: Add register dump support for MICROCHIP LAN78xx Signed-off-by: Robert Marko <robimarko@gmail.com>
* ltq-vdsl-fw: add meaningful version informationDaniel Golle2018-06-201-1/+1
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* dnsmasq: fix dnsmasq startup issueHans Dedecker2018-06-202-9/+1
| | | | | | | | | | | Commit ecd954d530 installs specific interface triggers which rewrites the dnsmasq config file and restarts dnsmasq if the network interface becomes active for which a trigger has been installed. In case no dhcp sections are specified or ignore is set to 1 dnsmasq will not be started at startup which breaks DNS resolving. Fix this by ditching the BOOT check in start_service and always start dnsmasq at startup. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ltq-vdsl-fw: add nonshared flagDaniel Golle2018-06-191-0/+2
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mwlwifi: update to version 10.3.8.0-20180615Kabuli Chana2018-06-191-4/+13
| | | | | | | | fix mcs rate for HT support 88W8997 protect rxringdone Signed-off-by: Kabuli Chana <newtownBuild@gmail.com>
* kernel/modules: kmod-chaoskey: Add missing dependencyHauke Mehrtens2018-06-181-0/+1
| | | | | | | | This new package was missing the dependency to kmod-random-core which caused some build errors. Fixes: 163ab9135a9 ("kernel/modules: add chaoskey module, hardware TRNG") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* busybox: update to 1.28.4Magnus Kroken2018-06-181-3/+3
| | | | Signed-off-by: Magnus Kroken <mkroken@gmail.com>
* ltq_atm: burn ifx_atm_alloc_tx with fireKevin Darbyshire-Bryant2018-06-181-44/+1
| | | | | | | | Drop code that was never used. Tested on: BT HomeHub 5a Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* kernel/modules: add chaoskey module, hardware TRNGHannu Nyman2018-06-181-0/+15
| | | | | | | | | | | | | | Package the driver for Chaoskey, a USB dongle that provides a True Random Number Generator (TRNG) and feeds entropy to kernel. Chaoskey driver is included the upstream Linux sources, so only packaging it is needed. Run-tested with ipq806x/R7800 and mvebu/WRT3200ACM. (Requires CONFIG_HW_RANDOM kernel option.) Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 09:22:22 +0000