aboutsummaryrefslogtreecommitdiffstats
path: root/package/system/mtd/src/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* mediatek: add support for Buffalo WSR-2533DHP2INAGAKI Hiroshi2021-03-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the Buffalo WSR-2533DHP2. The device uses the Broadcom TRX image format with a special magic. To be able to boot the images or load them they have to be wrapped with different headers depending how it is loaded. There are multiple ways to install OpenWrt on this device. Boot ramdisk from U-Boot ---------------------------- This will load the image and not write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux to SDRAM via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-initramfs-kernel.bin 4. The system boots the image Write to flash from U-Boot ----------------------------- This will load the image over tftp and directly write it into the flash. 1. Stop boot menu with "space" key 2. Select "System Load Linux Kernel then write to Flash via TFTP." 3. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory-uboot.bin 4. The system writes this image into the flash and boots into it. Write to flash from Web UI ----------------------------- This will load the image over over the Web UI and write it into the flash 1. Open the Web UI 2. Go to "管理" -> "ファームウェア更新" 3. Select "ローカルファイル指定" and click "更新実行" 4. Load this image: openwrt-mediatek-mt7622-buffalo_wsr-2533dhp2-squashfs-factory.bin 5. The system writes this image into the flash and boots into it. Specifications ------------------- * SoC: MT7622 (4x4 2.4 GHz Wifi) * Wifi: MT7615 (4x4 5 GHz Wifi) * Flash: Winbond W29N01HZ 128MB SLC NAND * RAM 256MB * Ethernet: Realtek RTL8367S (5 x 1GBit/s, SoC via 2.5GBit/s) Co-Developed-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mtd: fixtrx: support CFE imagetag on bmips targetÁlvaro Fernández Rojas2021-02-221-0/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* ar71xx: drop targetAdrian Schmutzler2020-08-301-1/+0
| | | | | | | | | | This target has been mostly replaced by ath79 and won't be included in the upcoming release anymore. Finally put it to rest. This also removes all references in packages, tools, etc. as well as the uboot-ar71xx and vsc73x5-ucode packages. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* mtd: enable wrgg support for ath79Stijn Tintel2020-06-111-1/+1
| | | | | | This is required for the D-Link DAP-2695-A1. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* mtd: add linksys_bootcount for ramipsDavide Fioravanti2020-05-171-1/+1
| | | | | | | | | | | | | Reset bc is needed for Linksys EA7500 v2's dual boot. Size impact (tested with Linksys EA7500 v2 @ mt7621): mtd_25_mipsel_24kc.ipk: 13174 -> 13628 (454 bytes) initramfs: 3660350 -> 3660688 (338 bytes) Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com> [add size impact information] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm63xx: rename target to bcm63xxAdrian Schmutzler2020-02-141-1/+1
| | | | | | | | | | This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* brcm47xx: rename target to bcm47xxAdrian Schmutzler2020-02-141-1/+1
| | | | | | | | | | This change makes the names of Broadcom targets consistent by using the common notation based on SoC/CPU ID (which is used internally anyway), bcmXXXX instead of brcmXXXX. This is even used for target TITLE in make menuconfig already, only the short target name used brcm so far. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* package: mtd: add fixseama command for ath79Chuanhong Guo2019-07-161-0/+1
| | | | | | This is needed by Qihoo C301. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* gemini: Fix up firmware checksum on DIR-685Linus Walleij2019-05-181-0/+1
| | | | | | | | | | | | | | | | | | Using the same method as the D-Link DAP-2695 A1 we use the "mtd" tool to augment the firmware checkum in flash on first boot of a new firmware on the D-Link DIR-685. We need to augment the Makefile for "mtd" to build in the special WRGG fixup support for Gemini as well. This works around the problem of the machine not booting after factory install unless the sysupgrade is applied immediately. Based on commit e3875350f3e4185020b64e0588bba521cd1d6e64 "ar71xx: add support for D-Link DAP-2695 rev. A1" Cc: Stijn Tintel <stijn@linux-ipv6.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* mtd: base-files: Unify dual-firmware devices (Linksys)Jeff Kletsky2019-05-181-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Consistently handle boot-count reset and upgrade across ipq40xx, ipq806x, kirkwood, mvebu Dual-firmware devices often utilize a specific MTD partition to record the number of times the boot loader has initiated boot. Most of these devices are NAND, typically with a 2k erase size. When this code was ported to the ipq40xx platform, the device in hand used NOR for this partition, with a 16-byte "record" size. As the implementation of `mtd resetbc` is by-platform, the hard-coded nature of this change prevented proper operation of a NAND-based device. * Unified the "NOR" variant with the rest of the Linksys variants * Added logging to indicate success and failure * Provided a meaningful return value for scripting * "Protected" the use of `mtd resetbc` in start-up scripts so that failure does not end the boot sequence * Moved Linksys-specific actions into common `/etc/init.d/bootcount` For upgrade, these devices need to determine which partition to flash, as well as set certain U-Boot envirnment variables to change the next boot to the newly flashed version. * Moved upgrade-related environment changes out of bootcount * Combined multiple flashes of environment into single one * Current-partition detection now handles absence of `boot_part` Runtime-tested: Linksys EA8300 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [checkpatch.pl fixes, traded split strings for 80+ chars per line]
* mtd: add logic for TP-Link ramips recovery magicDavid Bauer2019-01-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds an option to set the recovery flag of newer TP-Link MediaTek boards and remove it after a successful write. To make use of this feature, add the '-t' option to mtd-write. The '-t' option takes the mtd partition containing the recovery flag (usually 'romfile') as an argument. Make sure this partition is not flagged as read-only! Example: > mtd -t romfile write owrt.bin firmware This command writes the recovery-flag before it begins writing the image to the firmware partition. After the image-write has been successful, the recovery flag is removed. This way, the TP-Link web-recovery is automatically enabled on an unsucessful flash (e.g. power loss). This option is only available if the mtd package is compiled for the ramips target. Signed-off-by: David Bauer <mail@david-bauer.net>
* mtd: add linksys_bootcount to the ipq40xx targetOever González2019-01-261-0/+1
| | | | | | | | | | | | This commit adds the object 'linksys_bootcount_fix.o' to the ipq40xx target. This is needed for the Linksys EA6350v3 device. Without this patch, the device will switch-back between the current and the last flashed firmware every 3 (three) reboots. With this patch, the device works as expected. Signed-off-by: Ryan Pannell <ryan@osukl.com> Signed-off-by: Oever González <notengobattery@gmail.com>
* ramips: add support for D-Link DAP-1522 A1George Hopkins2018-02-131-1/+1
| | | | | | | | | | | | | | | | | | D-Link DAP-1522 is a wireless bridge/access point with 4 LAN ports and a dual-band wireless chipset. Specifications: - Ralink RT2880 - 32 MB of RAM - 4 MB of Flash - 4x 10/100/1000 Mbps Ethernet (RTL8366SR) - 802.11abgn (RT2850) Flash Instructions: 1. Download lede-ramips-rt288x-dap-1522-a1-squashfs-factory.bin 2. Open the web interface and upload the image Signed-off-by: George Hopkins <george-hopkins@null.net>
* mtd: add fixwrg commandGeorge Hopkins2018-02-131-0/+1
| | | | | | Add a command to fix WRG headers, based on wrgg.c. Signed-off-by: George Hopkins <george-hopkins@null.net>
* mtd: add fixwrgg commandStijn Tintel2016-10-271-1/+2
| | | | | | | Based on fixseama. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* mtd: add linksys_bootcount for ipq806xAdrian Panella2016-06-131-0/+1
| | | | | | Reset bc is needed for Linksys EA8500's dual boot. Signed-off-by: Adrian Panella <ianchi74@outlook.com>
* mtd: enable "fixseama" on bcm53xxRafał Miłecki2016-01-281-1/+1
| | | | | | | | There are D-Link bcm53xx devices using Seama format. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> SVN-Revision: 48521
* kirkwood: support Linksys boot counter on EA[34]500Luka Perkov2015-11-101-0/+1
| | | | | | | | | | | | | This is done with existing code from the WRT1900AC port. It makes sure the "auto_recovery" bootloader option is set, and resets the s_env boot counter after a successful boot. This gives users without a serial console connection some measure of safety. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47433
* mvebu: add support for the Linksys boot counterImre Kaloz2015-08-191-0/+1
| | | | | | | | | | | | | The u-boot boot counter was never reset after a successful boot, which sometimes could make some variables become out of sync. This patch adds support for the boot counter and enables auto_recovery unconditionally. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 46690
* bcm53xx: add fixtrxHauke Mehrtens2014-09-211-0/+1
| | | | | | | | | Without running fixtrx the image will not boot at the second time, because the CRC the boot loader check is invalid at that time. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 42639
* mtd: add a "mtd verify" callJohn Crispin2013-11-191-1/+2
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 38871
* package/mtd: enable seama fixup code for ar71xxGabor Juhos2013-09-191-1/+1
| | | | | | | | It will be used for the WD My Net N600. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38073
* packages: clean up the package folderJohn Crispin2013-06-211-0/+18
Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 37007
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-13 00:06:31 +0000