aboutsummaryrefslogtreecommitdiffstats
path: root/package/network
Commit message (Collapse)AuthorAgeFilesLines
* iwinfo: update to version 2018-07-24Nick Hainke2018-07-301-4/+4
| | | | | | | | | | Update to new iwinfo version. Adds support for channel survey. Adds ubus support. Etc. Signed-off-by: Nick Hainke <vincent@systemli.org> (cherry picked from commit 296ae7ab89c179ff39feff973000fcb864754df7)
* iwinfo: bump to latest git HEADJohn Crispin2018-07-301-3/+3
| | | | | | | | | e59f925 hardware: add device ids for QCA9984, 88W8887 and 88W8964 radios 2a82f87 nl80211: back out early when receiving FAIL-BUSY reply 77c32f0 nl80211: fix code calculating average signal and rate Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit 20b76c0a5bb7a13dcc739bd644f0f968e3b3c68a)
* dnsmasq: bump to dnsmasq v2.80test3Kevin Darbyshire-Bryant2018-07-2820-1565/+6
| | | | | | | | | | | | | | | | | | Refresh patches Upstream commits since last bump: 3b6eb19 Log DNSSEC trust anchors at startup. f3e5787 Trivial comment change. c851c69 Log failure to confirm an address in DHCPv6. a3bd7e7 Fix missing fatal errors when parsing some command-line/config options. ab5ceaf Document the --help option in the french manual 1f2f69d Fix recurrent minor spelling mistake in french manual f361b39 Fix some mistakes in french translation of the manual eb1fe15 When replacing cache entries, preserve CNAMES which target them. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 1e93ef84981f2722138824413a1b197fdab7fb6c)
* dnsmasq: don't use network functions at boottime (FS#1542)Hans Dedecker2018-07-282-6/+15
| | | | | | | | | | | | | As dnsmasq is started earlier than netifd usage of network.sh functions at boottime will fail; therefore don't call at boottime the functions which construct the dhcp pool/relay info. As interface triggers are installed the dhcp pool/relay info will be constructed when the interface gets reported as up by netifd. At the same time also register interface triggers based on DHCP relay config. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (cherry picked from commit 2336b942b37f265c59547d738ca558b61102833d)
* dnsmasq: bump to latest patches on 2.80rc2Kevin Darbyshire-Bryant2018-07-2819-11/+406
| | | | | | | | | | | | | | | | Refresh patches and backport upstream to current HEAD: a997ca0 Fix sometimes missing DNSSEC RRs when DNSSEC validation not enabled. 51e4eee Fix address-dependent domains for IPv6. 05ff659 Fix stupid infinite loop introduced by preceding commit. db0f488 Handle some corner cases in RA contructed interfaces with addresses changing interface. 7dcca6c Warn about the impact of cache-size on performance. 090856c Allow zone transfer in authoritative mode whenever auth-peer is specified. cc5cc8f Sane error message when pcap file header is wrong. c488b68 Handle standard and contructed dhcp-ranges on the same interface. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit fbf475403b911f46e91b57fb7a6cf3c65276464c)
* odhcpd: update to latest git HEADJo-Philipp Wich2018-07-261-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Changes: 81a281e dhcpv6-ia: fix border assignment size setting a2ffc59 dhcpv6-ia: fix status code for not on link IAs 5b087a6 dhcpv6-ia: improve error checking in assign_pd() c9114a1 config: fix wrong assignment bb8470f dhcpv4: delay forced renew transaction start 62a1b09 dhcpv4: fix DHCP address space logic d5726ff dhcpv4: improve logging when sending DHCP messages 9484351 odhcpd: call handle_error when socket error can be retrieved c45e2eb dhcpv6: fix out of bounds write in handle_nested_message() c2ff5af dhcpv6-ia: log renew messages as well 676eb38 router: fix possible segfault in send_router_advert() 392701f odhcpd: fix passing possible negative parameter 029123b treewide: switch to C-code style comments 6b79748 router: improve error checking 12e21bc netlink: fix incorrect sizeof argument d7aa414 dhcpv6: improve error checking in dhcpv6_setup_interface() 373495a ubus: fix invalid ipv6-prefix json 79d5e6f ndp: improve error checking d834ae3 dhcpv4: fix error checking in dhcpv4_setup_interface() f2aa383 dhcpv4: fix out of bound access in dhcpv4_put 4591b36 dhcpv4: improve error checking in dhcpv4_setup_interface() 4983ee5 odhcpd: fix strncpy bounds c0f6390 odhcpd: Check if open the ioctl socket failed 345bba0 dhcpv4: improve error checking in handle_dhcpv4() 44cce31 ubus: avoid dumping interface state with NULL message Cherry picked and squashed from commits: b7ef10cbf0 odhcpd: update to latest git HEAD 98a6bee09a odhcpd: update to latest git HEAD 88c88823d5 odhcpd: update to latest git HEAD Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* firewall: update to latest git HEAD and build with LTOHans Dedecker2018-07-261-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | Reduces .ipk size on MIPS from 41.6k to 41.1k Changes: 30463d0 zones: add interface/subnet bound LOG rules 0e77bf2 options: treat time strings as UTC times d2bbeb7 firewall3: make reject types selectable by user aa8846b ubus: avoid dumping interface state with NULL message Cherry picked and squashed from commits: a3f2451fba firewall: update to latest git HEAD 433d71e73e fw3: update to latest git HEAD ef96d1e34a firewall: compile with LTO enabled 1e83f775a3 firewall3: update to latest git HEAD 3ee2c76ae0 firewall: update to latest git HEAD Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* wireguard-tools: add wireguard_watchdog scriptAleksandr V. Piskunov2018-07-252-2/+63
| | | | | | | | | | | | | This watchdog script tries to re-resolve hostnames for inactive WireGuard peers. Use it for peers with a frequently changing dynamic IP. persistent_keepalive must be set, recommended value is 25 seconds. Run this script from cron every minute: echo '* * * * * /usr/bin/wireguard_watchdog' >> /etc/crontabs/root Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com> [bump the package release] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 20c4819c7baf6f9b91420849caf30e5137bd75d6)
* wireguard: bump to 0.0.20180718Jason A. Donenfeld2018-07-251-2/+2
| | | | | | | | | | | | | | | 80b41cd version: bump snapshot fe5f0f6 recieve: disable NAPI busy polling e863f40 device: destroy workqueue before freeing queue 81a2e7e wg-quick: allow link local default gateway 95951af receive: use gro call instead of plain call d9501f1 receive: account for zero or negative budget e80799b tools: only error on wg show if all interfaces failk Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> [Added commit log to commit description] Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 57b808ec88315db6743b3159a04dbb16097597ea)
* wireguard: bump to 0.0.20180708Jason A. Donenfeld2018-07-251-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | * device: print daddr not saddr in missing peer error * receive: style Debug messages now make sense again. * wg-quick: android: support excluding applications Android now supports excluding certain apps (uids) from the tunnel. * selftest: ratelimiter: improve chance of success via retry * qemu: bump default kernel version * qemu: decide debug kernel based on KERNEL_VERSION Some improvements to our testing infrastructure. * receive: use NAPI on the receive path This is a big change that should both improve preemption latency (by not disabling it unconditionally) and vastly improve rx performance on most systems by using NAPI. The main purpose of this snapshot is to test out this technique. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> (cherry picked from commit 4630159294024c0718077e49dbb440919440de87)
* iproute2: tc: backport canonical cake supportKevin Darbyshire-Bryant2018-07-212-150/+154
| | | | | | | | | | | | | | | | | | | iproute2's tc was updated to support the recently upstreamed cake qdisc. Backport this canonical support from upstream into iproute2 v4.16 There is no kernel kmod/userspace tc ABI change in this release from the previous package bump, so everyone can breath a sigh of relief. This is largely a code style change, the exception to prove the rule: option 'autorate_ingress' has been changed to 'autorate-ingress' to fit in with upstream option naming expectations. No openwrt package (e.g. sqm-scripts) has knowledge of 'autorate_ingress' thus only users who made their own scripts or used it within the 'dangerous configuration' options of sqm-scripts will be affected. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* igmpproxy: run in foreground for procdKevin Darbyshire-Bryant2018-07-182-2/+2
| | | | | | | | | | procd needs processes to stay in foreground to remain under its gaze and control. Failure to do so means service stop commands fail to actually stop the process (procd doesn't think it's running 'cos the process has exited already as part of its forking routing) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 9d5a2469304eb23b6d09432a6d9b6a57d0019d2a)
* qos-scripts: fix uci callback handlingTony Ambardar2018-07-163-29/+29
| | | | | | | | | | | | | | | | | The previous callback code was fragile, dependent on some UCI callback bugs and side-effects now fixed in master commit 73d8a6ab. Update scripts to use callbacks where appropriate and necessary, while using normal UCI config parsing for all else. This results in smaller, simpler, more robust code. Use callbacks in generate.sh to only process 'interface' defaults and the varying entries for 'reclassify', 'default' and 'classify' sections. Also switch qos-stat to use non-callback UCI handling. The current changes work independently of 73d8a6ab (i.e. both before and after), and are consistent with UCI config parsing documentation. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* odhcp6c: add noserverunicast config option for broken DHCPv6 serversHans Dedecker2018-07-152-6/+9
| | | | | | | | | | | Fix broken DHCPv6 servers which provide the server unicast option but do not reply on DHCPv6 renew messages directed to the IPv6 address contained in the server unicast option which results in broken IPv6 connectivity. 67ae6a7 odhcp6c: add option to ignore Server Unicast option Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: update to latest git HEADHans Dedecker2018-07-151-4/+4
| | | | | | b99c1f6 odhcp6c: remove len check in option parsing handle Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: user string option supportHans Dedecker2018-07-151-3/+3
| | | | | | ca8822b odhcp6c: add support for user string options Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uhttpd: update to latest Git headJo-Philipp Wich2018-07-151-3/+3
| | | | | | | | | | | db86175 lua: honour size argument in recv() function d3b9560 utils: add uh_htmlescape() helper 8109b95 file: escape strings in HTML output 393b59e proc: expose HTTP Origin header in process environment 796d42b client: flush buffered SSL output when tearing down client ustream Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit b54bef205846e2b30da23c1316c4a9b941c5078d)
* wireguard: bump to 0.0.20180625Kevin Darbyshire-Bryant2018-07-071-2/+2
| | | | | | | | | | | | | | | | | | | | | dfd9827 version: bump snapshot 88729f0 wg-quick: android: prevent outgoing handshake packets from being dropped 1bb9daf compat: more robust ktime backport 68441fb global: use fast boottime instead of normal boottime d0bd6dc global: use ktime boottime instead of jiffies 18822b8 tools: fix misspelling of strchrnul in comment 0f8718b manpages: eliminate whitespace at the end of the line 590c410 global: fix a few typos bb76804 simd: add missing header 7e88174 poly1305: give linker the correct constant data section size fd8dfd3 main: test poly1305 before chacha20poly1305 c754c59 receive: don't toggle bh Compile-tested-for: ath79 Archer C7 v2 Run-tested-on: ath79 Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 3ce11588f6346ebedde68ef30a06e01999e292bb)
* iproute2: tc: update support for cakeKevin Darbyshire-Bryant2018-07-071-28/+83
| | | | | | | | | | Bump iproute2/tc support of cake. Add support for cake's change to u64 attribute passing for certain attributes (rate & byte counts) Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit a2165f936e94ed71dff5fdbf0fbc58c88fb17158)
* iptables: set nonshared flagJohn Crispin2018-06-221-0/+1
| | | | | | | this makes sure that offloading support is properly included for v4.14 targets. Signed-off-by: John Crispin <john@phrozen.org> (cherry picked from commit ebe1216c7cd10357c3277fb25bae4e508d4b165a)
* wwan: Add support for Gemalto Cinterion cellular modulesDavid Thornley2018-06-224-1/+17
| | | | | | | | | | | | | | Includes specific support for PH8(1e2d-0053) / ELS61(1e2d-005b) modules. Note for ELS61, the serial driver changes from serial option(ttyUSB) to usb-cdc (ttyACM). Two additional fixes in this commit resolve issues with ttyACM devices: - * wwan.sh - sys-fs has a subdirectory indirection (*/tty/ttyACMx) which was not handled properly * wwan.usb - dependent scripts were not included, so this never actually called proto_set_available for example (and relied on inadvertent call for ttyUSB case) Signed-off-by: David Thornley <david.thornley@touchstargroup.com> (cherry picked from commit cb262b09396edd171eb3903e50ce5ddeb593f963)
* wireguard: bump to 0.0.20180620Kevin Darbyshire-Bryant2018-06-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | 0bc4230 version: bump snapshot ed04799 poly1305: add missing string.h header cbd4e34 compat: use stabler lkml links caa718c ratelimiter: do not allow concurrent init and uninit 894ddae ratelimiter: mitigate reference underflow 0a8a62c receive: drop handshake packets if rng is not initialized cad9e52 noise: wait for crng before taking locks 83c0690 netlink: maintain static_identity lock over entire private key update 0913f1c noise: take locks for ss precomputation 073f31a qemu: bump default kernel bec4c48 wg-quick: android: don't forget to free compiled regexes 7ce2ef3 wg-quick: android: disable roaming to v6 networks when v4 is specified 9132be4 dns-hatchet: apply resolv.conf's selinux context to new resolv.conf 41a5747 simd: no need to restore fpu state when no preemption 6d7f0b0 simd: encapsulate fpu amortization into nice functions f8b57d5 queueing: re-enable preemption periodically to lower latency b7b193f queueing: remove useless spinlocks on sc 5bb62fe tools: getentropy requires 10.12 4e9f120 chacha20poly1305: use slow crypto on -rt kernels on arm too Compiled-for: ar71xx, lantiq Run-tested-on: ar71xx Archer C7 v2 & lantiq HH5a Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: fix dnsmasq startup issueHans Dedecker2018-06-202-9/+1
| | | | | | | | | | | Commit ecd954d530 installs specific interface triggers which rewrites the dnsmasq config file and restarts dnsmasq if the network interface becomes active for which a trigger has been installed. In case no dhcp sections are specified or ignore is set to 1 dnsmasq will not be started at startup which breaks DNS resolving. Fix this by ditching the BOOT check in start_service and always start dnsmasq at startup. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* ds-lite: make tunnel encapsulation limit support configurable (FS#1501)Hans Dedecker2018-06-192-3/+7
| | | | | | | | | | | | Be compatible with ISPs which don't support the destination option header containing the tunnel encapsulation limit as reported in FS#1501. Setting the uci parameter encaplimit to ignore; allows to disable the insertion of the destination option header in the ds-lite packets. Otherwise the tunnel encapsulation limit value can be set to a value from 0 till 255 by setting the encaplimit uci parameter accordingly. If no encaplimit value is specified the default value is 4 as before. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* odhcp6c: make ds-lite/map tunnel encapsulation limit support configurable ↵Hans Dedecker2018-06-193-3/+9
| | | | | | | | | | | | | | (FS#1501) Be compatible with ISPs which don't support the destination option header containing the tunnel encapsulation limit as reported in FS#1501 for dynamic created ds-lite/map interfaces. Setting the uci parameter encaplimit_dslite/map to ignore; allows to disable the insertion of the destination option header for the dynamic created ds-lite/map interface. Otherwise the tunnel encapsulation limit value can be set to a value from 0 till 255 by setting the encaplimit_dslite/map uci parameter accordingly. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* netifd: update to latest git HEAD (FS#1501)Hans Dedecker2018-06-191-3/+3
| | | | | | a580028 system-linux: make encaplimit configurable for ip6 tunnels (FS#1501) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* map: make tunnel encapsulation limit support configurable (FS#1501)Hans Dedecker2018-06-192-8/+10
| | | | | | | | | | | | Be compatible with ISPs which don't support the destination option header containing the tunnel encapsulation limit as reported in FS#1501. Setting the uci parameter encaplimit to ignore; allows to disable the insertion of the destination option header in the map-e packets. Otherwise the tunnel encapsulation limit value can be set to a value from 0 till 255 by setting the encaplimit uci parameter accordingly. If no encaplimit value is specified the default value is 4 as before. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: fix confdir option processing (FS#1572)Hans Dedecker2018-06-112-2/+3
| | | | | | | | Fix condir option processing allowing to use the format "<directory>[,<file-extension>......]," as documented on the dnsmasq man page which previously resulted into bogus dir being created. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* wireguard: bump to 0.0.20180531 to fix flow offloadingJason A. Donenfeld2018-05-311-6/+5
| | | | | | | | | | This version bump was made upstream mostly for OpenWRT, and should fix an issue with a null dst when on the flow offloading path. While we're at it, Kevin and I are the only people actually taking care of this package, so trim the maintainer list a bit. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* hostapd: fix IEEE 802.11r (fast roaming) defaultsGospod Nassa2018-05-241-21/+27
| | | | | | | | | | | | | | | | | | | | | | | | | Use ft_psk_generate_local=1 by default, as it makes everything else fairly trivial. All of the r0kh/r1kh and key management stuff goes away and hostapd fairly much does it all for us. We do need to provide nas_identifier, which can be derived from the BSSID, and we need to generate a mobility_domain, for which we default to the first four chars of the md5sum of the SSID. The complex manual setup should also still work, but the defaults also now work easily out of the box. Verified by manually running hostapd (with the autogenerated config) and watching the debug output: wlan2: STA ac:37:43:a0:a6:ae WPA: FT authentication already completed - do not start 4-way handshake This was previous submitted to LEDE in https://github.com/lede-project/source/pull/1382 [dwmw2: Rewrote commit message] Signed-off-by: Gospod Nassa <devianca@gmail.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org> (cherry picked from commit 3cc56a5534b8b49a7e9ba57edf9878ec32bdd27a)
* wireguard: no longer need portability patchKevin Darbyshire-Bryant2018-05-242-19/+1
| | | | | | | | | | Drop package/network/services/wireguard/patches/100-portability.patch Instead pass 'PLATFORM=linux' to make since we are always building FOR linux. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit f06def4221c25f4ee43d31c2b90a1371ba4d6d33)
* ltq-xdsl-app: start after led scriptMathias Kresin2018-05-242-3/+2
| | | | | | | | | | | | | During handshake we are highjack and reset a LED to the configured trigger afterwards. ltq-xdsl-app need to start after the LED init script, to ensure that the LED init script doesn't re-highjack the LED we are currently using for handshake indication. Drop the comment about the atm dependency. The dependency was fixed quite some time ago by using hotplug scripts for br2684ctl. Signed-off-by: Mathias Kresin <dev@kresin.me> (cherry picked from commit 0678cc850ccc068ba33eb87f5f1bf8294a87e611)
* Revert "dnsmasq: use "hostsdir" instead of "addn-hosts""Hans Dedecker2018-05-241-1/+1
| | | | | | | | | This reverts commit c97189e26dfb9b0eaf5b9cd7e33a99e2f780cb58 as it has different issues: -Host file is not written in a directory unique per dnsmasq instance -odhcpd writes host info into the same directory but still sends a SIGHUP to dnsmasq Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* dnsmasq: use "hostsdir" instead of "addn-hosts"Christian Schoenebeck2018-05-231-1/+1
| | | | | | | 1.) "addn-hosts" per default point to a file (but it supports directory) 2.) "hostsdir" only support directory with the additional benefit: New or changed files are read automatically. Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
* wireguard: bump to 20180519Jason A. Donenfeld2018-05-221-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | * chacha20poly1305: add mips32 implementation "The OpenWRT Commit" - this significantly speeds up performance on cheap plastic MIPS routers, and presumably the remaining MIPS32r2 super computers out there. * timers: reinitialize state on init * timers: round up instead of down in slack_time * timers: remove slack_time * timers: clear send_keepalive timer on sending handshake response * timers: no need to clear keepalive in persistent keepalive Andrew He and I have helped simplify the timers and remove some old warts, making the whole system a bit easier to analyze. * tools: fix errno propagation and messages Error messages are now more coherent. * device: remove allowedips before individual peers This avoids an O(n^2) traversal in favor of an O(n) one. Before systems with many peers would grind when deleting the interface. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* curl: bump to 7.60.0Hans Dedecker2018-05-173-15/+4
| | | | | | | | | Refresh patches; remove 320-mbedtls_dont_use_deprecated_sha256_function patch as upstream fixed For changes in version 2.60 see https://curl.haxx.se/changes.html#7_60_0 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* wireguard: bump to 20180514Kevin Darbyshire-Bryant2018-05-172-9/+10
| | | | | | | | | | | | | | | 52be69b version: bump snapshot 4884b45 ncat-client-server: add wg-quick variant a333551 wg-quick: add darwin implementation f5bf84d compat: backport for OpenSUSE 15 fe1ae1b wg-quick: add wg symlink ecc1c5f wg-quick: add android implementation 3e6bb79 tools: reorganize for multiplatform wg-quick b289d12 allowedips: Fix graphviz output after endianness patch Refresh cross compile compatibility patch Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* wireguard: Add support for ip6prefix config optionToke Høiland-Jørgensen2018-05-151-0/+6
| | | | | | | | | | | | This makes it easier to distribute prefixes over a wireguard tunnel interface, by simply setting the ip6prefix option in uci (just like with other protocols). Obviously, routing etc needs to be setup properly for things to work; this just adds the config option so the prefix can be assigned to other interfaces. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
* hostapd: fix VHT80 for encrypted mesh channel settingsSven Eckelmann2018-05-142-1/+46
| | | | | | | | | | | | | | | | | | | The max_oper_chwidth settings was parsed incorrectly for big endian system. This prevented the system to switch to VHT80 (or VHT160). Instead they were mapped to: * HT20: 20MHz * VHT20: 20MHz * HT40: 40MHz * VHT40: 40MHz * VHT80: 40MHz * VHT160: 40MHz This happened because each max_oper_chwidth setting in the config file was parsed as "0" instead of the actual value. Fixes: a4322eba2b12 ("hostapd: fix encrypted mesh channel settings") Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
* firewall3: update to latest git HEADJohn Crispin2018-05-141-4/+4
| | | | | | | | b45e162 helpers: fix the set_helper in the rule structure f742ba7 helpers.conf: support also tcp in the CT sip helper 08b2c61 helpers: make the proto field as a list rather than one option Signed-off-by: John Crispin <john@phrozen.org>
* hostapd: fix mesh+APDaniel Golle2018-05-1415-220/+171
| | | | | | | | Fix encrypted (or DFS) AP+MESH interface combination in a way similar to how it's done for AP+STA and fix netifd shell script. Refresh patches while at it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* wireguard: bump to 0.0.20180513Kevin Darbyshire-Bryant2018-05-141-2/+2
| | | | | | | | | | | | | | | | | | | 6b4a340 version: bump snapshot faa2103 compat: don't clear header bits on RHEL 4014532 compat: handle RHEL 7.5's recent backports 66589bc queueing: preserve pfmemalloc header bit 37f114a chacha20poly1305: make gcc 8.1 happy 926caae socket: use skb_put_data 724d979 wg-quick: preliminary support for go implementation c454c26 allowedips: simplify arithmetic 71d44be allowedips: produce better assembly with unsigned arithmetic 5e3532e allowedips: use native endian on lookup 856f105 allowedips: add selftest for allowedips_walk_by_peer 41df6d2 embeddable-wg-library: zero attribute padding 9a1bea6 keygen-html: add zip file example f182b1a qemu: retry on 404 in wget for kernel.org race Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: bump to 2.80test2Kevin Darbyshire-Bryant2018-05-1212-8/+1172
| | | | | | | | | | | | | | | | | | | Refresh patches and backport upstream to current HEAD: 1f1873a Log warning on very large cachesize config, instead of truncating it. 0a496f0 Do unsolicited RAs for interfaces which appear after dnsmasq startup. e27825b Fix logging in previous. 1f60a18 Retry SERVFAIL DNSSEC queries to a different server, if possible. a0088e8 Handle query retry on REFUSED or SERVFAIL for DNSSEC-generated queries. 34e26e1 Retry query to other servers on receipt of SERVFAIL rcode. 6b17335 Add packet-dump debugging facility. 07ed585 Add logging for DNS error returns from upstream and local configuration. 0669ee7 Fix DHCP broken-ness when --no-ping AND --dhcp-sequential-ip are set. f84e674 Be persistent with broken-upstream-DNSSEC warnings. Compile & run tested: ar71xx Archer C7 v2 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* dnsmasq: add specific interface procd triggershux2018-05-112-2/+14
| | | | | | | | | | | | | | | | | | Right now interface.update events are sent out by netifd upon interface state, route, address (lifetime), prefix lifetime changes. Dnsmasq is only interested in interface state changes and currently adds an interface trigger for all the "interface.*" events. In combination with commit 23bba9cb330, which triggers a SIGHUP signal to dnsmasq, IPv6 address/prefix lifetime changes on the wan will trigger dnsmasq reloads which can become frequent in case of shorter lifetimes. To avoid frequent dnsmasq reload, this patch adds specific interface triggers. During dnsmasq init it loops dhcp uci section; if the value of the ignore option is set to 0, then the corresponding interface trigger is not installed. Otherwise, if the ignore option value is 1, then procd_add_interface_trigger is called which adds the interface trigger. Signed-off-by: hux <xinxing.huchn@gmail.com>
* igmpproxy: bump to 0.2.1Kevin Darbyshire-Bryant2018-05-0710-679/+4
| | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Point at github which is new, maintained location for igmpproxy. Remove all patches as all have been upstreamed. Closes FS#1456 Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* igmpproxy: fix creation of firewall rulesJaap Buurman2018-05-073-9/+14
| | | | | | | | The init sccript for igmpproxy uses the option 'network' both as an interface name for fetching the l3_device name and for creating the firewall rules. This only works if the name of the network and firewall zone are identical. This commit introduces a new option 'zone' for configuring the upstream and downstream firewall zones in order for the init script to create the required firewall rules automatically. When no such options are given, the init script falls back to not creating the firewall rules and the user can opt to create these manually. Signed-off-by: Jaap Buurman <jaapbuurman@gmail.com>
* hostapd: add channel utilization as config optionNick Hainke2018-05-071-2/+7
| | | | | | Add the channel utilization as hostapd configuration option. Signed-off-by: Nick Hainke <vincent@systemli.org>
* iproute2: import latest cakeKevin Darbyshire-Bryant2018-05-072-446/+425
| | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. Bearing fruits of the latest upstreaming efforts on cake. Changes: diffserv-llt dropped. The paper describing this DSCP allocation has gone stale and doesn't appear used. The userspace to kernel netlink messages for cake have been reworked in a backwards incompatible way, so tc & cake must be bumped together this once. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* iproute2: backport json_print-fix-hidden-64-bit-type-promotionKevin Darbyshire-Bryant2018-05-072-1/+289
| | | | | | | | | | | | | | | | | | | | | | | The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. print_uint() will silently promote its variable type to uint64_t, but there is nothing that ensures that the format string specifier passed along with it fits (and the function name suggest to pass "%u"). Fix this by changing print_uint() to use a native 'unsigned int' type, and introduce a separate print_u64() function for printing 64-bit values. All call sites that were actually printing 64-bit values using print_uint() are converted to use print_u64() instead. Since print_int() was already using native int types, just add a print_s64() to match, but don't convert any call sites. Fixes wonkyness in some stats from some qdiscs under tc Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* hostapd: fix a mesh mode crash with CONFIG_TAXONOMY enabledFelix Fietkau2018-05-031-0/+23
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 17:01:26 +0000