aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* kernel: netfilter: fix nf-nathelper(-extra) descriptionUwe Arnold2017-07-251-2/+2
| | | | | | | | | The tftp and irc netfilter modules are provided by nf-nathelper-extra and not by nf-nathelper. Signed-off-by: Uwe Arnold <donvipre@gmail.com> [move the irc module as well] Signed-off-by: Mathias Kresin <dev@kresin.me>
* ath9k: fix regression in multicast buffering fixFelix Fietkau2017-07-251-1/+3
| | | | | | | Update the more data flag on the last frame, but tx from the first frame on. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath9k: fix typo in US tx power reduction fixFelix Fietkau2017-07-251-1/+1
| | | | | | Use max_t instead of min_t to prevent the value from going below zero Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath9k: fix more-data flag for buffered multicast packetsFelix Fietkau2017-07-241-0/+38
| | | | | | | | The flag needs to be cleared for the last packet in the list, not the first one. Fixes some issues with multicast packet loss for powersave clients connected to an ath9k AP. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath9k: adjust tx power reduction for US regulatory domainFelix Fietkau2017-07-241-0/+23
| | | | | | | FCC regulatory rules allow for up to 3 dBi antenna gain. Account for this in the EEPROM based tx power reduction code. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mwlwifi: update to version 10.3.4.0 / 2017-07-13Jo-Philipp Wich2017-07-221-3/+3
| | | | | | Ref: https://github.com/lede-project/source/pull/1217 Reported-by: Kabuli Chana <newtownBuild@gmail.com> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mt76: update to the latest version, fixes stability issuesFelix Fietkau2017-07-211-3/+3
| | | | | | | | 8a649c3 mt7603: mac: code optimization 8dee788 mt7603: mac: stop netdev queues during watchdog reset 3c4c9a6 tx: move state check in mt76_txq_send_burst() Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: use the generic board_name functionMathias Kresin2017-07-151-6/+2
| | | | | | Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me>
* kmod-sched-cake: drop maintainerKevin Darbyshire-Bryant2017-07-151-1/+0
| | | | | | Drop myself from maintainership of 'cake'. Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
* netfilter: add iptables-mod-rpfilter packageAlin Nastac2017-07-111-0/+18
| | | | | | | | | Unlike /proc/sys/net/ipv4/conf/INTF/rp_filter flag, rule iptables -t raw -I PREROUTING -m rpfilter --invert -j DROP prevents conntrack table to become full when a packet flood with randomly selected source IP addresses is received from the lan side. Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
* acx-mac80211: remove cobalt referenceMathias Kresin2017-07-071-1/+1
| | | | | | The cobalt target was removed with 22b38f145da7. Signed-off-by: Mathias Kresin <dev@kresin.me>
* acx-mac80211: disable for kernel 4.9+Mathias Kresin2017-07-071-1/+1
| | | | | | | Due to changes in the PCI subsystem this driver doesn't compile with kernel 4.9. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mt76: update to the latest versionFelix Fietkau2017-07-051-3/+3
| | | | | | | | | | | | | Fixes mt7603 stablity and performance issues af32615 mt7603: change auto rate control register initialization 01fb9ba mt7603: fix control/status retries count estimation cf4ba12 mt7603: avoid tx rate sampling using no retransmissions 32eab50 mt7603: set wtbl entry vif index c4e3dea mt7603: use the real vif index in txwi header for normal tx. e90a81a mt7603: fix channel width fall back in TXWI Signed-off-by: Felix Fietkau <nbd@nbd.name>
* treewide: add license tagsFlorian Eckert2017-06-248-0/+14
| | | | | | Add licence tags where missing. Signed-off-by: Florian Eckert <fe@dev.tdt.de>
* mt76: update to the latest version, fixes rate control issuesFelix Fietkau2017-06-171-3/+3
| | | | | | Should improve performance considerably in many cases Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: refresh patchesFelix Fietkau2017-06-1744-323/+144
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k: increase bmi timeout to fix OTP on qca99xx boards and add bmi ↵Pavel Kubelun2017-06-177-11/+196
| | | | | | | | | identification through pre-cal file Backporting upstream patches. Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [refresh, rename patches]
* mwlwifi: update to version 10.3.4.0 / 2017-06-06Jo-Philipp Wich2017-06-081-3/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211: use KERNEL_MAKEOPTSFelix Fietkau2017-06-072-6/+12
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add KERNEL_MAKE and KERNEL_MAKE_FLAGS variables and move to kernel.mkFelix Fietkau2017-06-072-2/+2
| | | | | | | | This allows packages to use kernel make options without the forced -C $(LINUX_DIR). It also makes it more clear that it to be called from kernel module packages directly. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* lantiq: fix lantiq_mei.c and amazonse.dsti for adsl modem firmwareTino Reichardt2017-06-031-31/+29
| | | | | | | | | | | The ltq-adsl-mei package is used for 3 lantiq device types: danube, amazon-se and ar9. These different SoC's need also different definitions. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de> [fix LTQ_USB_OC_INT for AR9 to match documentation] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* lantiq: fix ifxmips_atm_amazon_se.cTino Reichardt2017-06-031-8/+0
| | | | | | Remove 6 defines, which were defined already some lines above. Signed-off-by: Tino Reichardt <milky-lede@mcmilk.de>
* kernel: properly package 8250 serial PCI moduleDaniel Golle2017-06-031-4/+7
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mt76: update mirror hash after tar portablity fixFelix Fietkau2017-05-301-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mwlwifi: update to the latest versionAnsuel Smith2017-05-301-3/+3
| | | | Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* mt76: update to the latest version, fixes a mt7603 beacon issueFelix Fietkau2017-05-301-3/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest version, improves mt7603/7628 stabilityFelix Fietkau2017-05-291-4/+4
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: fix autoloading arch-specific modulesYousong Zhou2017-05-253-9/+9
| | | | | | Fixes FS#745 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* backlight-pwm: fix module descriptionYousong Zhou2017-05-251-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: add kmod-usb-net-pl packageRoman Spychała2017-05-251-0/+13
| | | | | | Kernel support for Prolific PL-2301/2302/25A1 based cables Signed-off-by: Roman Spychała <roed@onet.eu>
* mac80211: add support for rtl8821ae pcie adapterHans Ulli Kroll2017-05-211-2/+22
| | | | | | | | | Add support for Realtek RTL8821AE/RTL8812AE PCIe adapter. This device supports 802.11ac and bluetooth testet on PC Engines APU with AP and STA mode Signed-off-by: Hans Ulli Kroll <ulli.kroll@googlemail.com>
* mac80211: rt2x00: remove unneccessary codeDaniel Golle2017-05-181-0/+134
| | | | | | | | Use chanreg and dccal helpers to reduce the size of ePA code. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: fixed white-space so patch applies]
* ath10k-ct: Update to latest ath10k-ct driver.Ben Greear2017-05-181-3/+3
| | | | | | | | | | | | | Supports disabling firmware hex logging that many found too verbose. Increase BMI timer so system works more often with 9888 Compex NIC (and maybe others). Allow configuring a specific board-file per NIC using fwcfg file. Maybe fix a scan-busy problem when using CT firmware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* kernel: add hwmon for W83627EHF and familyPhilip Prindeville2017-05-171-0/+17
| | | | | | | | Remove support for NCT6775/6 from W83627EHF driver so the NCT6775 driver will still be used for those chips. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
* kernel: add Digi Edgeport USB serial driver packageBjørn Mork2017-05-161-0/+39
| | | | Signed-off-by: Bjørn Mork <bjorn@mork.no>
* om-watchdog: add support for Teltonika RUT5xx (ramips)Steffen Weinreich2017-05-152-1/+10
| | | | | | | | | | | Add rut5xx GPIO PIN selection to om-package startup script. Testet on a RUT500 device, the timeout value of the hardware watchdog is about 280 sec. Signed-off-by: Steffen Weinreich <steve@weinreich.org> [split into two commits, bump PKG_RELEASE] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* om-watchdog: cosmetic code style fixesPiotr Dymacz2017-05-151-31/+31
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* om-watchdog: cleanup MakefilePiotr Dymacz2017-05-151-8/+0
| | | | | | Drop redundant Build/Prepare, empty lines and duplicated Build/Compile. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* mac80211: gracefully handle preexisting VIFJo-Philipp Wich2017-05-141-0/+6
| | | | | | | | | | | | | | | | | | | | Gracefully handle cases where the to-be-created wireless interface already exists on the system which might commonly happen with non-multi-SSID capable wireless drivers. This fixes commit 8301e613655c2d95fa5430a1a57d92d966fdc70b which caused previously ignored "Too many open files in system (-23)" errors to fail the wireless setup procedure. With the updated approach we'll still try recreating the vif after one second if the first attempt to do so failed with ENFILE but we will now consider the operation successfull if a second attempt still yields ENFILE with the requested ifname already existing on the system. Fixes FS#664, FS#704. Suggested-by: Vittorio Gambaletta <openwrt@vittgam.net> Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211, hostapd: always explicitly set beacon intervalMatthias Schiffer2017-05-132-5/+7
| | | | | | | | | | | | | | | | One of the latest mac80211 updates added sanity checks, requiring the beacon intervals of all VIFs of the same radio to match. This often broke AP+11s setups, as these modes use different default intervals, at least in some configurations (observed on ath9k). Instead of relying on driver or hostapd defaults, change the scripts to always explicitly set the beacon interval, defaulting to 100. This also applies the beacon interval to 11s interfaces, which had been forgotten before. VIF-specific beacon_int setting is removed from hostapd.sh. Fixes FS#619. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: allow selecting RTC drivers on targets without explicit RTC supportFelix Fietkau2017-05-021-8/+15
| | | | | | Keep them disabled by default to avoid pulling in extra kernel bloat Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Backport AR934x OTP PatchChris Blake2017-04-261-0/+42
| | | | | | | | | Merged upstream in https://patchwork.kernel.org/patch/9572541/, this patch fixes the OTP offset used by the AR934x and AR955X to properly enable reading from the OTP. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* mac80211: rt2x00: add incomplete support for external PA on MT7620Daniel Golle2017-04-241-0/+125
| | | | | | | | | | | | | | Do as the vendor driver does -- however, some devices apparently patched support for external PA into the driver similar to how it was done on Rt3352, using EEPROM_NIC_CONF1 rather than EEPROM_NIC_CONF2, hence we check for both fields. Somehow the vendor driver also no longer offers the option of only one of the TX paths having an external PA (which was probably to weird to ever be implemented in practise, though it doesn't seem like a particularly bad idea to me). Do the same in rt2x00 and enable support for external PA on both TX paths whenever it is set for TX0 in EEPROM. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: reorder patches and prepare for MT7620 external PADaniel Golle2017-04-245-0/+128
| | | | | | | | | Import change to make external PA capability consistent with the vendor driver instead of having the logic inverted. While at it, apply patches in the same order as they got merged upstream. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2800: fix mt7620 E2 channel registersTomislav Požega2017-04-181-0/+41
| | | | | | | | update RF register 47 and 54 values according to vendor driver Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: moved changes into a separate patch]
* mac80211: rt2800: fix mt7620 vco calibration registersTomislav Požega2017-04-181-0/+50
| | | | | | | | | | Use register values from init LNA function instead of the ones from restore LNA function. Apply register values based on rx path configuration. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: moved changes into a separate patch]
* mac80211: fix kconfig recursive dependency warningFelix Fietkau2017-04-181-2/+1
| | | | | | | | | | | | | Make brcmfmac depend on !TARGET_uml. Technically, brcmfmac could be built for uml because only SDIO support won't work on that target. However, selectively avoiding the dependency propagation of !TARGET_uml from kmod-mmc to avoid including a reference to BRCMFMAC_SDIO doesn't work. In practice, brcmfmac is completely useless on uml, so let's just disable it there. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: rt2x00: fix MT7620 LNA gain and VCO-after-ALCDaniel Golle2017-04-172-0/+88
| | | | | | | This should fix issues with bad RX as well as AP not coming up and/or scanning failing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: add rt2x00 debug symbols to PKG_CONFIG_DEPENDSJonas Gorski2017-04-121-0/+2
| | | | | | | Chaning these symbols require a recompilation of the modules, so make the system aware of it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* mac80211: manually apply dependencies to prevent a recoursive oneJonas Gorski2017-04-121-1/+2
| | | | | | | Apply the !UML dependency to both the symbol and the DEPENDS so there is no recursive dependency anymore. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-17 03:50:18 +0000