aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: backport kernel fix for CVE-2017-13080Stijn Tintel2017-10-171-0/+81
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> (cherry picked from commit 2f701194c29da50bfda968a83c6609843f74a7f4)
* mac80211: Update wireless-regdb to master-2017-03-07Ryan Mounce2017-10-161-12/+19
| | | | | | | | | | | | | | | | | The short log of changes since the 2016-06-10 release is below. Jouni Malinen (1): wireless-regdb: Remove DFS requirement for India (IN) Ryan Mounce (1): wireless-regdb: Update rules for Australia (AU) and add 60GHz rules Seth Forshee (2): wireless-regdb: Update 5 GHz rules for Canada wireless-regdb: update regulatory.bin based on preceding changes Signed-off-by: Ryan Mounce <ryan@mounce.com.au> (cherry picked from commit 8b12e62e9cd6ba2e3bb2e7f2555180df0173c7c6)
* brcmfmac: backport length check in brcmf_cfg80211_escan_handler()Felix Fietkau2017-10-161-0/+63
| | | | | | Fixes CVE-2017-0786 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: sync with version 878456caf60d from masterFelix Fietkau2017-10-131-4/+4
| | | | | | | Backport required DT changes from commit dabdd123c90c. Significantly improves stability and performance for MT76x2 and MT7603 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ltq-vdsl-mei: revert disable optimized firmware downloadMathias Kresin2017-09-301-2/+2
| | | | | | | | | | | | This reverts commit b428f45c062dc8ca8c2f35f491fa467dc5b85519. If the optimized firmware download is disabled, the xdsl subsystem hangs in the "idle request" state after physically disconnecting and reconnecting the xdsl modem from the line. It might fix the failing line init on boot as well. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-vdsl-mei: disable optimized firmware downloadMathias Kresin2017-09-281-2/+2
| | | | | | | | | With ltq-vdsl-mei 1.5.17.6 an optimized firmware download was added and enabled by default. As soon as the optimized firmware download is enabled, a watchdog based reboot is trigger between 24h to 48h of uptime if the board isn't connected to a xdsl line. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ltq-vdsl: fix PM thread suspend and resume handlingMartin Schiller2017-09-282-1/+108
| | | | | | | | This is a backport form drv_dsl_cpe_api-4.18.10 and fixes some PM thread handling issues which lead to high system load and watchdog trigger within 1h of uptime for boards not connected to a xdsl line. Signed-off-by: Martin Schiller <ms@dev.tdt.de>
* treewide: fix shellscript syntax errors/typosLorenzo Santina2017-09-132-2/+2
| | | | | | | | | Fix multiple syntax errors in shelscripts (of packages only) These errors were causing many conditions to not working properly Signed-off-by: Lorenzo Santina <lorenzo.santina@edu.unito.it> [increase PKG_RELEASE, drop command substitution from directip.sh] Signed-off-by: Mathias Kresin <dev@kresin.em>
* kernel: netfilter: fix nf-nathelper(-extra) descriptionUwe Arnold2017-07-251-2/+2
| | | | | | | | | The tftp and irc netfilter modules are provided by nf-nathelper-extra and not by nf-nathelper. Signed-off-by: Uwe Arnold <donvipre@gmail.com> [move the irc module as well] Signed-off-by: Mathias Kresin <dev@kresin.me>
* mwlwifi: update to version 10.3.4.0 / 2017-06-06Jo-Philipp Wich2017-06-081-3/+3
| | | | Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* mac80211, hostapd: always explicitly set beacon intervalMatthias Schiffer2017-05-272-5/+7
| | | | | | | | | | | | | | | | One of the latest mac80211 updates added sanity checks, requiring the beacon intervals of all VIFs of the same radio to match. This often broke AP+11s setups, as these modes use different default intervals, at least in some configurations (observed on ath9k). Instead of relying on driver or hostapd defaults, change the scripts to always explicitly set the beacon interval, defaulting to 100. This also applies the beacon interval to 11s interfaces, which had been forgotten before. VIF-specific beacon_int setting is removed from hostapd.sh. Fixes FS#619. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* kernel: fix autoloading arch-specific modulesYousong Zhou2017-05-253-9/+9
| | | | | | Fixes FS#745 Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* backlight-pwm: fix module descriptionYousong Zhou2017-05-251-1/+1
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* om-watchdog: add support for Teltonika RUT5xx (ramips)Steffen Weinreich2017-05-152-1/+10
| | | | | | | | | | | Add rut5xx GPIO PIN selection to om-package startup script. Testet on a RUT500 device, the timeout value of the hardware watchdog is about 280 sec. Signed-off-by: Steffen Weinreich <steve@weinreich.org> [split into two commits, bump PKG_RELEASE] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* om-watchdog: cosmetic code style fixesPiotr Dymacz2017-05-151-31/+31
| | | | Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* om-watchdog: cleanup MakefilePiotr Dymacz2017-05-151-8/+0
| | | | | | Drop redundant Build/Prepare, empty lines and duplicated Build/Compile. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
* mac80211: rt2800: fix mt7620 E2 channel registersTomislav Požega2017-05-021-0/+41
| | | | | | | | update RF register 47 and 54 values according to vendor driver Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: moved changes into a separate patch]
* mac80211: rt2800: fix mt7620 vco calibration registersTomislav Požega2017-05-021-0/+50
| | | | | | | | | | Use register values from init LNA function instead of the ones from restore LNA function. Apply register values based on rx path configuration. Signed-off-by: Tomislav Požega <pozega.tomislav@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [daniel@makrotopia.org: moved changes into a separate patch]
* mac80211: rt2x00: fix MT7620 LNA gain and VCO-after-ALCDaniel Golle2017-05-022-0/+88
| | | | | | | This should fix issues with bad RX as well as AP not coming up and/or scanning failing. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: import upstream changes and rebase our patchesDaniel Golle2017-05-0249-189/+1676
| | | | | | | | Some of our local patches have been accepted upstream. And there are some more relevant changes (mostly for rt2800usb). Import them and rebase our remaining local patches on top. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rt2x00: mt7620: make fixes requested upstreamDaniel Golle2017-05-021-170/+674
| | | | | | | | Introduce RT6352 instead of matching against RF7620. Clean up channel setting rfvals. Port bandwidth filter calibration. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rt2x00: mt7620: yet another beauty sessionDaniel Golle2017-05-021-171/+524
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | So here is another round of improvements for MT7620 WiFi. This commit fixes a few significant issues related to TX_PWR_CFG_x and TX_ALC and also makes the code more readable by adding register descriptions for things added for MT7620 and use the usual bit-field access macros and the now defined macros instead of plain bit-ops and magic numbers. Properly describe EEPROM_TARGET_POWER at word 0x68 (== byte 0xD0) and thereby fix internal TXALC which would otherwise just read out-of-bounds of the EEPROM map. Split-out tx-power/ALC related stuff into an additional function. Fix VCO calibration, it was carried out properly in the channel switching but incomplete in the actual VCO calibration function. Also there is no need to trigger VCO calibration in channel switching, the VCO calibration function is already being called at this point. Remove it from channel switching function to avoid redundant code. The TX power calibration differs significantly from all other Mediatek/Ralink chips: They finally allow 0.5dB steps stored as 8-bit values for (almost) each bitrate -- and promptly ran out of space and for some reason didn't want to change the EEPROM layout. The hence opted for a scheme of sharing values for some adjecent bitrates and a highly over-complicated (or obfuscated?) way to populate the TX_PWR_CFG_x registers with the values stored in the EEPROM. The code here now looks much less complicated than what you see in the vendor's driver, however, it does the exact same thing: bGpwrdeltaMinus is a constant and always TRUE, hence half of the code was dead. Gpwrdelta is always 0 (rather than using the value read from the EEPROM). What remains is some very grotesque effort to avoid 0x20, probably some hardware bug related to some misunderstanding of what a singed 8-bit value is (imagine: if it was a signed 6-bit value then someone could believe that 0x20 == 0x0). And then they didn't clean it up once they later on anandonned that whole story of having a constant offset for 40 MHz channels and just set the offset to be constant 0 -- there is no effort for avoiding 0x20 for the 20 MHz values stored in the EEPROM, hence that's probably just a forbidden value in the EEPROM specs and won't appear anyway... Anyway, the whole thing felt like solving some college math test where in the end everything cancels out and the result equals 0 ;) To make sure that channel bandwidth power compensation really doesn't need to be taken care of, output a warning when the corresponding value stored in the EEPROM is non-zero. Also there is no apparent reason to refrain from initializing RFCSR register 13, it doesn't fail what-so-ever. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: add rt2x00 debug symbols to PKG_CONFIG_DEPENDSJonas Gorski2017-05-021-0/+2
| | | | | | | Chaning these symbols require a recompilation of the modules, so make the system aware of it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
* ath9k: fix power limits on initFelix Fietkau2017-05-021-0/+47
| | | | | | | | | | | | | | | The tx power applied by set_txpower is limited by the CTL (conformance test limit) entries in the EEPROM. These can change based on the user configured regulatory domain. Depending on the EEPROM data this can cause the tx power to become too limited, if the original regdomain CTLs impose lowr limits than the CTLs of the user configured regdomain. To fix this issue, set the initial channel limits without any CTL restrictions and only apply the CTL at run time when setting the channel and the real tx power. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath: do not apply broken power limits with ATH_USER_REGDFelix Fietkau2017-05-023-12/+44
| | | | | | | | | If a device uses the default EEPROM code, typically only the main CTLs are valid, and they do not apply properly when switching to a different regulatory domain. If the regdomain deviates from the EEPROM one, force the world roaming regdomain to ensure that power limits are sane Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: ensure that the metapackage gets built as .ipkFelix Fietkau2017-04-051-0/+4
| | | | | | Fixes errors during the image builder run Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport an upstream fix for queue start/stop handlingFelix Fietkau2017-04-031-0/+29
| | | | | | Fixes issues with 802.11s Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: mwifiex-sdio: select DRIVER_11AC_SUPPORTÁlvaro Fernández Rojas2017-03-111-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: mwifiex-pcie: select DRIVER_11AC_SUPPORTÁlvaro Fernández Rojas2017-03-111-1/+1
| | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: add support for Marvell 802.11n/802.11ac SDIO Wireless cardsHenryk Heisig2017-03-111-1/+18
| | | | | | | | This adds option to build kernel module and firmware packages for a Marvell 8887 SDIO Wireless device Signed-off-by: Henryk Heisig <hyniu@o2.pl> Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* brcm2708-gpu-fw: update to latest versionÁlvaro Fernández Rojas2017-03-081-8/+8
| | | | | | This is needed in order to add support for the new RPi Zero W Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* kernel: add Chinese codepagesHsing-Wang Liao2017-03-011-0/+32
| | | | Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
* leds-apu2: Add PC Engines APU2 LED driverChris Blake2017-03-014-0/+435
| | | | | | | This adds support for the PCB LEDs and Reset Button found on the PC Engines APU2/APU3 embedded boards. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* netfilter: re-enable TEE support for kernel 4.4Koen Vandeputte2017-03-011-1/+1
| | | | | | | | | It got disabled in commit 4454a3fb6375cf1adf17f63a54cd7660bc40caa7 but works nicely these days. Tested on cns3xxx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* gpio-nct5104d: Add nct5104d driver packageChris Blake2017-03-014-0/+519
| | | | | | | | | | | | | | This adds support for the SuperIO chip nct5104d found on the PC Engines APU boards, which allows for a handful of additional ports, such as 2x additional UART pinouts, enabling an external watchdog (no driver for this functionality yet), and 16 GPIO pins. More info can be found at https://pcengines.ch/ht_gpio.htm Thanks to @feckert for helping package this. Cc: Florian Eckert <Eckert.Florian@googlemail.com> Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* x86: drop ep80579-driversMathias Kresin2017-03-0129-13884/+0
| | | | | | | | The subtarget on which the driver still depends was removed with dee8986b95dcc200550faebe49c143e5d2357c60 because it was unmaintained for a long time. Signed-off-by: Mathias Kresin <dev@kresin.me>
* mac80211: hwsim: select DRIVER_11AC_SUPPORT and DRIVER_11W_SUPPORTYousong Zhou2017-02-261-1/+1
| | | | | | | | This is required for default wireless configuration of malta target to work out of the box again. Fixes "77ece30e: hostapd: Add ability to specify that that wireless driver supports 802.11ac" Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* acx-mac80211: fix scan API error that could lead to a crashFelix Fietkau2017-02-241-0/+29
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: sync with master branch as of 9edff13abd97Felix Fietkau2017-02-24214-12942/+1799
| | | | | | | | | | | | | | | | Includes the following changes: 9edff13abd mac80211: disable potentially harmful PS software retry for A-MPDU sessions 75216a76b0 mac80211: backport upstream fix for CSA in IBSS mode 368cc8ef47 mac80211: update brcmfmac backporting brcmf_err cleanups 66a63d25c4 mac80211: fix build on linux 3.18 9eacb9d7fc rt2x00: mt7620: lots of improvements fd94fa61a7 mac80211: brcmfmac: update Raspberry Pi patches for linux 4.9 649e766a64 mac80211: update to wireless-testing 2017-01-31 47540afa5d ath9k: add a warning to the tx99 config option b367eef21d mac80211: rt2x00: add support for external LNA on MT7620 9200e168f2 mac80211: move (& update) upstream accepted brcmfmac patches Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: depend on kmod-hwmon-core, it gets used when CONFIG_THERMAL is setFelix Fietkau2017-02-241-1/+1
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: fix kernel api compatibility issuesFelix Fietkau2017-02-242-0/+108
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ath10k-ct: Fix performance of 2x2 hardware running 3x3 firmware.Ben Greear2017-02-241-3/+3
| | | | | | | The driver had a bug when calculating the rateset. This resolves that and allows full VHT mcs rates on 2x2 hardware. Signed-off-by: Ben Greear <greearb@candelatech.com>
* mt76: split kmod packageJoseph C. Lehner2017-02-231-13/+49
| | | | | | | | | | | | | | | | This patch splits `kmod-mt76` into three separate packages: `kmod-mt76-core`, `kmod-mt76x2` and `kmod-mt7603`. By making `kmod-mt76` a metapackage containing these new packages, the previous behaviour of including all drivers and firmware is left unchanged, unless explicitly unselected in `DEVICE_PACKAGES`. This splitting is especially beneficial for devices with small flash chips, since the `kmod-mt76` package currently requires ~160K on squashfs (after compression). Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com> Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup]
* package/om-watchdog: add OpenMesh A40 supportSven Eckelmann2017-02-151-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/om-watchdog: add OpenMesh A60 supportSven Eckelmann2017-02-151-1/+2
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/om-watchdog: add OpenMesh OM2Pv4/-HSv4 supportSven Eckelmann2017-02-151-0/+2
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* ath9k: fix various issues in the airtime-fairness implementationFelix Fietkau2017-02-122-1/+108
| | | | | | | Effects of the bugs could include memory corruption, tx hangs, kernel crahes, possibly other things as well Signed-off-by: Felix Fietkau <nbd@nbd.name>
* brcmfmac: improve Raspberry Pi 3 stabilityÁlvaro Fernández Rojas2017-02-072-2/+25
| | | | | | | - Really disable power management (wrong config flags). - Disable internal roaming engine. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
* mac80211: brcmfmac: backport wowlan netdetect fixesRafał Miłecki2017-02-064-2/+149
| | | | | | | | | | | | | | I needed a moment to figure out relation between this patchset and the nl80211: fix validation of scheduled scan info for wowlan netdetect It appears nl80211 commit will go on top of brcmfmac changes so it's safe to backport these patches. One patch that was excluded is commit 2a2a5d1835b6 ("brcmfmac: add .update_connect_params() callback") as it depends on missing commit 088e8df82f91 ("cfg80211: Add support to update connection parameters"). Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* mac80211: brcmfmac: backport PSM watchdog improvementsRafał Miłecki2017-02-062-0/+96
| | | | Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 16:08:13 +0000