aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel/mac80211/patches/rt2x00
Commit message (Collapse)AuthorAgeFilesLines
* mac80211: rt2x00: experimental improvements for MT7620 wifiDaniel Golle2022-09-1924-483/+1411
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Serge Vasilugin reports: To improve mt7620 built-in wifi performance some changes: 1. Correct BW20/BW40 switching (see comments with mark (1)) 2. Correct TX_SW_CFG1 MAC reg from v3 of vendor driver see https://gitlab.com/dm38/padavan-ng/-/blob/master/trunk/proprietary/rt_wifi/rtpci/3.0.X.X/mt76x2/chips/rt6352.c#L531 3. Set bbp66 for all chains. 4. US_CYC_CNT init based on Programming guide, default value was 33 (pci), set chipset bus clock with fallback to cpu clock/3. 5. Don't overwrite default values for mt7620. 6. Correct some typos. 7. Add support for external LNA: a) RF and BBP regs never be corrected for this mode b) eLNA is driven the same way as ePA with mt7620's pin PA but vendor driver explicitly pin PA to gpio mode (for forrect calibration?) so I'm not sure that request for pa_pin in dts-file will be enough First 5 changes (really 2) improve performance for boards w/o eLNA/ePA. Changes 7 add support for eLNA Configuration w/o eLAN/ePA and with eLNA show results tx/rx (from router point of view) for each stream: 35-40/30-35 Mbps for HT20 65-70/60-65 Mbps for HT40 Yes. Max results for 2T2R client is 140-145/135-140 with peaks 160/150, It correspond to mediatek driver results. Boards with ePA untested. Reported-by: Serge Vasilugin <vasilugin@yandex.ru> Signed-off-by: Daniel Golle <daniel@makrotopia.org> [directly include v3 of the patchset submitted upstream] (cherry picked from commit 31a6605de04218e1c04bd5c2436c24d7d1c07506) (cherry picked from commit e785ca05e9f0502894772f5df92192b816ba5d7c) (cherry picked from commit 412fcf3d4400f84551f3ead0514834c62d94a251)
* mac80211: rt2x00: fix typoSungbo Eo2022-09-192-5/+3
| | | | | | | Add missing semicolon and refresh patches. Signed-off-by: Sungbo Eo <mans0n@gorani.run> (cherry picked from commit d826c91704d2baa5e389c225791740e4c61d62c4)
* mac80211: add patch descriptions to rt2x00 patchesDaniel Golle2022-09-186-1/+76
| | | | | | | | Prepare patches for sending upstream by adding patch descriptions generated from the original OpenWrt commits adding each patch. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit d4feb66048f6a8f387eedfb162a1184cdae9d756)
* mac80211: Update to version 5.15.58-1Hauke Mehrtens2022-07-311-1/+1
| | | | | | | | | This updates mac80211 to version 5.15.58-1 which is based on kernel 5.15.58. The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 3aa18f71f9c8a5447bdd2deda4e681175338164f)
* mac80211: Update to version 5.15.33-1Hauke Mehrtens2022-04-111-1/+1
| | | | | | | | | | | | | | | This updates mac80211 to version 5.15.33-1 which is based on kernel 5.15.33. The removed patches were applied upstream. This new release contains many fixes which were merged into the upstream Linux kernel. This also contains the following new drivers which are needed for ath11k: * net/qrtr/ * drivers/bus/mhi/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 3aa96efa24c13c6e0aafa5ad826f3f95a3bd74f9)
* mac80211: Update to version 5.15-rc6-1Hauke Mehrtens2021-10-241-1/+1
| | | | | | | | The removed patches were applied upstream. The Cisco Aironet 802.11b driver was removed from backports, remove it also from OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.12.19-1Hauke Mehrtens2021-10-231-1/+1
| | | | | | The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.11.22-1Hauke Mehrtens2021-10-2316-218/+35
| | | | | | | | The removed patches were applied upstream. This backports version 5.11.22 and later does not support kernel versions < 4.4, this allows us to remove some patches too. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to backports-5.10.68Hauke Mehrtens2021-09-226-10/+10
| | | | | | | | | | | | | | | | | | Refresh all patches. The removed patches were integrated upstream. This contains fixes for CVE-2020-3702 1. These patches (ath, ath9k, mac80211) were included in kernel versions since 4.14.245 and 4.19.205. They fix security vulnerability CVE-2020-3702 [1] similar to KrØØk, which was found by ESET [2]. Thank you Josef Schlehofer for reporting this problem. [1] https://nvd.nist.gov/vuln/detail/CVE-2020-3702 [2] https://www.welivesecurity.com/2020/08/06/beyond-kr00k-even-more-wifi-chips-vulnerable-eavesdropping/ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* treewide: backport support for nvmem on non platform devicesAnsuel Smith2021-08-051-6/+5
| | | | | | | | | | | | In the current state, nvmem cells are only detected on platform device. To quickly fix the problem, we register the affected problematic driver with the of_platform but that is more an hack than a real solution. Backport from net-next the required patch so that nvmem can work also with non-platform devices and rework our current patch. Drop the mediatek and dsa workaround and rework the ath10k patches. Rework every driver that use the of_get_mac_address api. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* mac80211: remove patches stripping down crypto supportFelix Fietkau2021-06-181-1/+1
| | | | | | | | Use of WPA3 and things like FILS is getting much more common, and platforms that can't affort the extra kilobytes for this code are fading away. Let's not hold back modern authentication methods any longer Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Update to backports-5.10.42Hauke Mehrtens2021-06-061-1/+1
| | | | | | | | | | | | The removed patches were integrated upstream. The brcmf_driver_work workqueue was removed in brcmfmac with kernel 5.10.42, the asynchronous call was covered to a synchronous call. There is no need to wait any more. This part was removed manually from this patch: brcm/860-brcmfmac-register-wiphy-s-during-module_init.patch Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: backport upstream fixes for FragAttacksFelix Fietkau2021-05-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | From the patch series description: Several security issues in the 802.11 implementations were found by Mathy Vanhoef (New York University Abu Dhabi), who has published all the details at https://papers.mathyvanhoef.com/usenix2021.pdf Specifically, the following CVEs were assigned: * CVE-2020-24586 - Fragmentation cache not cleared on reconnection * CVE-2020-24587 - Reassembling fragments encrypted under different keys * CVE-2020-24588 - Accepting non-SPP A-MSDU frames, which leads to payload being parsed as an L2 frame under an A-MSDU bit toggling attack * CVE-2020-26139 - Forwarding EAPOL from unauthenticated sender * CVE-2020-26140 - Accepting plaintext data frames in protected networks * CVE-2020-26141 - Not verifying TKIP MIC of fragmented frames * CVE-2020-26142 - Processing fragmented frames as full frames * CVE-2020-26143 - Accepting fragmented plaintext frames in protected networks * CVE-2020-26144 - Always accepting unencrypted A-MSDU frames that start with RFC1042 header with EAPOL ethertype * CVE-2020-26145 - Accepting plaintext broadcast fragments as full frames * CVE-2020-26146 - Reassembling encrypted fragments with non-consecutive packet numbers * CVE-2020-26147 - Reassembling mixed encrypted/plaintext fragments In general, the scope of these attacks is that they may allow an attacker to * inject L2 frames that they can more or less control (depending on the vulnerability and attack method) into an otherwise protected network; * exfiltrate (some) network data under certain conditions, this is specific to the fragmentation issues. A subset of these issues is known to apply to the Linux IEEE 802.11 implementation (mac80211). Where it is affected, the attached patches fix the issues, even if not all of them reference the exact CVE IDs. In addition, driver and/or firmware updates may be necessary, as well as potentially more fixes to mac80211, depending on how drivers are using it. Specifically, for Intel devices, firmware needs to be updated to the most recently released versions (which was done without any reference to the security issues) to address some of the vulnerabilities. To have a single set of patches, I'm also including patches for the ath10k and ath11k drivers here. We currently don't have information about how other drivers are, if at all, affected. Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Refresh patches againHauke Mehrtens2021-02-153-42/+49
| | | | | | | A wrong quilt configuration was used last time. Fixes: ed1e234d87fc ("mac80211: refresh patches") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: refresh patchesFelix Fietkau2021-02-143-49/+42
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: Update to version 5.10-rc6-1Hauke Mehrtens2021-02-143-5/+5
| | | | | | | | | The removed patches were applied upstream. This adapts ath10k-ct and mt76 to changed APIs. nl80211.h in iw is updated to match the version from backports. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.9.12-1Hauke Mehrtens2021-02-141-1/+1
| | | | | | | | | | | The removed patches were applied upstream. Remove the 300-mac80211-optimize-skb-resizing.patch. This patch was not applied upstream, but it conflicts with upstream changes and needs bigger changes. It was applied with Felix to remove this patch for now. It should be reworked and then send upstream later. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: rt2x00: save survey for every channel visitedMarkov Mikhail2020-10-211-0/+183
| | | | | | | | | | | | | | | rt2800 olny gives you survey for current channel. Survey-based ACS algorithms are failing to perform their job when working with rt2800. Make rt2800 save survey for every channel visited and be able to give away that information. There is a bug registred https://dev.archive.openwrt.org/ticket/19081 and this patch solves the issue. Signed-off-by: Markov Mikhail <markov.mikhail@itmh.ru>
* rt2x00: mt7620: differentiate based on SoC's CHIP_VERDaniel Golle2020-10-092-0/+547
| | | | | | | | | | | | | | | | | | | | | | | The vendor driver does things differently based on what it finds in the SoC's CHIP_VER register, which should tell whether this is MT7620N or MT7620A (PKG) and probably also the revision (VER) and most likely also something about the silicon implementer (ECO). Introduce codepaths just like the ones in the vendor driver to handle the different chips properly. Some of those paths are most likely dead code and left-overs from FPGA versions or early prototypes of the chip. It'd thus be great if people can post their kernel logs, at least the line telling the chip version and eco, so we know what's actually out there in the wild -- all I could find is [ 0.000000] SoC Type: Ralink MT7620A ver:2 eco:6 and [ 0.000000] SoC Type: Ralink MT7620N ver:2 eco:6 which would make things easier, as then we really just need to know whether it's MT7620N or MT7620A and not care about FPGA or prototypes with ver <= 1 and eco <= 2. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: Update to version 5.8-rc2-1Hauke Mehrtens2020-07-233-47/+3
| | | | | | | | | | | | | | | | | | | | | | | | The following patches: * 972-ath10k_fix-crash-due-to-wrong-handling-of-peer_bw_rxnss_override-parameter.patch * 973-ath10k_fix-band_center_freq-handling-for-VHT160-in-recent-firmwares.patch are replaced by this commit in the upstream kernel: * 3db24065c2c8 ("ath10k: enable VHT160 and VHT80+80 modes") The following patches were applied upstream: * 001-rt2800-enable-MFP-support-unconditionally.patch * 090-wireless-Use-linux-stddef.h-instead-of-stddef.h.patch The rtw88 driver is now split into multiple kernel modules, just put it all into one OpenWrt kernel package. rtl8812au-ct was patched to compile against the mac80211 from kernel 5.8, but not runtime tested. Add a patch which fixes ath10k on IPQ40XX, this patch was send upstream and fixes a crash when loading ath10k on this SoC. Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq40xx/ map-ac2200] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: rt2x00: define RF5592 in init_eeprom routineDaniel Golle2020-07-103-3/+54
| | | | | | | | | | | Make sure RF5592 is set for RT5592 chip which apparently sometimes doesn't have RF defined (but always comes with RF5592). This patch was originally submitted on linux-wireless by Tom Psyborg <pozega.tomislav@gmail.com> but got rejected. Turns out the patch is actually needed. Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: backport patch enabling MFPDaniel Golle2020-05-301-0/+44
| | | | | | | | | | | | From: Rui Salvaterra <rsalvaterra@gmail.com> Date: Mon, 25 May 2020 14:49:07 +0100 Subject: [PATCH] rt2800: enable MFP support unconditionally This gives us WPA3 support out of the box without having to manually disable hardware crypto. The driver will fall back to software crypto if the connection requires management frame protection. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: Update to version 5.7-rc3-1Hauke Mehrtens2020-05-211-1/+1
| | | | | | | | | | | This updates the mac80211 backport. The removed patches are already integrated in the upstream version. The 131-Revert-mac80211-aes-cmac-switch-to-shash-CMAC-driver.patch patch was manually adapted to the changes in kernel 5.7. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.6.8-1Hauke Mehrtens2020-05-2110-20/+20
| | | | | | | | This updates the mac80211 backport. The removed patches are already integrated in the upstream version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: rt2x00: prune more unnecessary exportsDaniel Golle2020-04-015-137/+27
| | | | | | | | | | | | The calibration patches for MT7620 unnecessarily export symbols and populate never accessed function pointers. Remove all that and make functions static as the only place where each of those functions is called is within rt2800lib.c. Also make code more readable by fixing indentation, removing unnecessary parantheses and simplifying some instructions using shorthands here and there. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: Update to version 5.4.27Hauke Mehrtens2020-03-292-89/+1
| | | | | | The removed patches are all integrated in the upstream version now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Fix rt2x00 exportsHauke Mehrtens2020-03-292-17/+6
| | | | | | | | | | | | | | | | | | | Do not export static functions, they are anyway not referenced by any code in a different module. This fixes the following compile warning: WARNING: "rt2800_rf_aux_tx0_loopback" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL WARNING: "rt2800_write_dc" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL WARNING: "rt2800_rf_configstore" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL WARNING: "rt2800_do_sqrt_accumulation" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL WARNING: "rt2800_rf_configrecover" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL WARNING: "rt2800_loft_search" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL WARNING: "rt2800_iq_search" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL WARNING: "rt2800_setbbptonegenerator" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL WARNING: "rt2800_rf_aux_tx1_loopback" [/drivers/net/wireless/ralink/rt2x00/rt2800lib] is a static EXPORT_SYMBOL_GPL Acked-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: fix symbol dependency of rt2x00lib kernel moduleSven Over2020-03-071-2/+8
| | | | | | | | | | | | On platforms that do not have CONFIG_MTD enabled, loading the rt2x00lib kernel module fails because it depends on symbols from the mtd module ("Unknown symbol get_mtd_device_nm"). This commit disables the code that can read the eeprom from mtd if mtd is not enabled. Signed-off-by: Sven Over <sp@cedenti.st> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* rt2x00: add throughput LED triggerDavid Bauer2019-12-301-0/+44
| | | | | | | | | This adds a (currently missing) throughput LED trigger for the rt2x00 driver. Previously, LED triggers had to be assigned to the netdev, which was limited to a single VAP. Signed-off-by: David Bauer <mail@david-bauer.net> Tested-by: Christoph Krapp <achterin@googlemail.com>
* mac80211: update to version 5.4-rc8Hauke Mehrtens2019-11-229-44/+9
| | | | | | | | This updates mac80211 to backports based on kernel 5.4-rc8. The deleted patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: rt2x00: remove errornous duplicate conditionDaniel Golle2019-11-038-13/+101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://patchwork.kernel.org/patch/11224189/ -- On 2019-10-28 06:07, wbob wrote: > Hello Roman, > > while reading around drivers/net/wireless/ralink/rt2x00/rt2800lib.c > I stumbled on what I think is an edit of yours made in error in march > 2017: > > https://github.com/torvalds/linux/commit/41977e86#diff-dae5dc10da180f3b055809a48118e18aR5281 > > RT6352 in line 5281 should not have been introduced as the "else if" > below line 5291 can then not take effect for a RT6352 device. Another > possibility is for line 5291 to be not for RT6352, but this seems > very unlikely. Are you able to clarify still after this substantial time? > > 5277: static int rt2800_init_registers(struct rt2x00_dev *rt2x00dev) > ... > 5279: } else if (rt2x00_rt(rt2x00dev, RT5390) || > 5280: rt2x00_rt(rt2x00dev, RT5392) || > 5281: rt2x00_rt(rt2x00dev, RT6352)) { > ... > 5291: } else if (rt2x00_rt(rt2x00dev, RT6352)) { > ... Hence remove errornous line 5281 to make the driver actually execute the correct initialization routine for MT7620 chips. As it was requested by Stanislaw Gruszka remove setting values of MIMO_PS_CFG and TX_PIN_CFG. MIMO_PS_CFG is responsible for MIMO power-safe mode (which is disabled), hence we can drop setting it. TX_PIN_CFG is set correctly in other functions, and as setting this value breaks some devices, rather don't set it here during init, but only modify it later on. Fixes: 41977e86c984 ("rt2x00: add support for MT7620") Reported-by: wbob <wbob@jify.de> Reported-by: Roman Yeryomin <roman@advem.lv> Signed-off-by: Daniel Golle <daniel@makrotopia.org> Acked-by: Stanislaw Gruszka <sgruszka@redhat.com> -- Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: Update to version 5.4-rc2Hauke Mehrtens2019-10-192-51/+1
| | | | | | | | | This updates mac80211 to backports based on kernel 5.4-rc2 ath10k-ct was updated to match the API changes and iw now uses the new nl80211.h header file. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.3.6Hauke Mehrtens2019-10-193-238/+0
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: rt2x00: backport 'rt2x00: initialize last_reset'Daniel Golle2019-10-011-0/+35
| | | | | | | | | | | | | | | | | https://patchwork.kernel.org/patch/11161981/ -- From: Stanislaw Gruszka <sgruszka@redhat.com> Subject: [PATCH] rt2x00: initialize last_reset Initialize last_reset variable to INITIAL_JIFFIES, otherwise it is not possible to test H/W reset for first 5 minutes of system run. Fixes: e403fa31ed71 ("rt2x00: add restart hw") Reported-and-tested-by: Jonathan Liu <net147@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> -- Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: revert commit causing regression in 5GHz bandDaniel Golle2019-08-298-14/+84
| | | | | | | | | | | | | | | | | | | From: Stanislaw Gruszka <sgruszka@redhat.com> This reverts commit 9ad3b55654455258a9463384edb40077439d879f. As reported by Sergey: "I got some problem after upgrade kernel to 5.2 version (debian testing linux-image-5.2.0-2-amd64). 5Ghz client stopped to see AP. Some tests with 1metre distance between client-AP: 2.4Ghz -22dBm, for 5Ghz - 53dBm !, for longer distance (8m + walls) 2.4 - 61dBm, 5Ghz not visible." It was identified that rx signal level degradation was caused by 9ad3b5565445 ("rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band"). So revert this commit. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: refresh patchesChristian Lamparter2019-08-2414-26/+22
| | | | Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: rt2x00: import pending patchesDaniel Golle2019-08-232-0/+109
| | | | | | | | | https://patchwork.kernel.org/patch/11111605/ https://patchwork.kernel.org/patch/11110703/ Fixes: 91c84e87c249 ("mac80211: rt2x00: clear IV's on start to fix AP mode regression") Fixes: 0b2c42ced21a ("mac80211: Update to version 5.2-rc7") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: clear IV's on start to fix AP mode regressionDaniel Golle2019-08-1910-18/+131
| | | | | | | | | | | | | | | To do not brake HW restart we should keep initialization vectors data. I assumed that on start the data is already initialized to zeros, but that not true on some scenarios and we should clear it. So add additional flag to check if we are under HW restart and clear IV's data if we are not. Patch fixes AP mode regression. Patch pending on linux-wireless and imported from patchwork. Fixes: 0b2c42ced21a ("mac80211: Update to version 5.2-rc7") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: Update to version 5.3-rc4-1Hauke Mehrtens2019-08-1711-34/+34
| | | | | | | | | The removed patches were applied upstream. The type of the RT2X00_LIB_EEPROM config option was changed to bool, because boolean is an invalid value and the new kconfig system complained about this. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.2-rc7Hauke Mehrtens2019-07-1850-3775/+54
| | | | | | | | | | | | | | This updates mac80211 to version 5.2-rc7, this contains all the changes to the wireless subsystem up to Linux 5.2-rc7. * The removed patches are applied upstream * b43 now uses kmod-lib-cordic * Update the nl80211.h file in iw to match backports version. * Remove the two backports from kernel 4.9, they were needed for mt76, but that can use the version from backports now, otherwise they collide and cause compile errors. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: rt2x00: replace patches with upstream versionDaniel Golle2019-04-2922-1203/+959
| | | | | | | | | | Support for RT3883/RT3663 was merged upstream [1]. Use that patch instead of our original series. The resulting source tree is exactly identical, this commit is merely reorganizing the patches. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git/commit/?id=d0e61a0f7cca51ce340a5a73595189972122ff25 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: replace patch with upstream versionDaniel Golle2019-04-123-57/+96
| | | | | | | | Replace the patch introduced by commit d0b969eee8 ("mac80211: rt2x00: do not increment sequence number while re-transmitting") was merged into wireless-drivers.git. Replace our version with the merged version. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: update to version 4.19.32-1Hauke Mehrtens2019-04-061-1/+1
| | | | | | | | The removed patches are now integrated in the upstream kernel. Refresh all patches on top of the new backports release. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Tested-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* mac80211: rt2x00: import and update pending patchesDaniel Golle2019-03-1212-5/+192
| | | | | | | | | | | Imported from patchwork, patches marked with '=' have already been in our tree: [v3,1/4] cfg80211: add ratelimited variants of err and warn [v3,2/4] rt2x00: use ratelimited variants dev_warn/dev_err [v3,3/4] rt2x00: check number of EPROTO errors =[v3,4/4] rt2x00: do not print error when queue is full Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: do not increment sequence number while re-transmittingVijayakumar Durai2019-03-051-0/+55
| | | | | | | | | | | Currently STA+AP re-transmitting the management frames with incremented sequence number if hardware is assigning the sequence. Fix is to assign the sequence number for Beacon by hardware and for other Management frames software will assign the sequence number Signed-off-by: Vijayakumar Durai <vijayakumar.durai1@vivint.com>
* mac80211: rt2x00: cleanup ePA, RXIQ and TX-LOFT codeDaniel Golle2019-03-014-230/+84
| | | | | | | | | | consolidate patch 651-rt2x00-remove-unneccesary-code.patch. fixup the most obvious whitespace problems in RXIQ and TX-LOFT code. always backup registers bbpr1, bbpr4, bbpr241 and bbpr242 to avoid compiler warning about them being potentially uninitialized. no functional changes (intended) Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: patch tracking cosmeticsDaniel Golle2019-03-019-0/+27
| | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: rt2x00: fix crash on release_firmwareStanislaw Gruszka2019-02-262-5/+5
| | | | | | | | | | Fix crash due to passing invalid r2x00dev->eeprom_file pointer to release_firmware(). Since we copy eeprom data with EEPROM_SIZE in rt2800_read_eeprom() we can use eeprom_file->size as marker if the file was crated by request_firmware(). Acked-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
* hostapd: add Multi-AP patches and config optionsArnout Vandecappelle (Essensium/Mind)2019-02-205-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | Cherry-pick Multi-AP commits from uptream: 9c06f0f6a hostapd: Add Multi-AP protocol support 5abc7823b wpa_supplicant: Add Multi-AP backhaul STA support a1debd338 tests: Refactor test_multi_ap bfcdac1c8 Multi-AP: Don't reject backhaul STA on fronthaul BSS cb3c156e7 tests: Update multi_ap_fronthaul_on_ap to match implementation 56a2d788f WPS: Add multi_ap_subelem to wps_build_wfa_ext() 83ebf5586 wpa_supplicant: Support Multi-AP backhaul STA onboarding with WPS 66819b07b hostapd: Support Multi-AP backhaul STA onboarding with WPS 8682f384c hostapd: Add README-MULTI-AP b1daf498a tests: Multi-AP WPS provisioning Add support for Multi-AP to the UCI configuration. Every wifi-iface gets an option 'multi_ap'. For APs, its value can be 0 (multi-AP support disabled), 1 (backhaul AP), 2 (fronthaul AP), or 3 (fronthaul + backhaul AP). For STAs, it can be 0 (not a backhaul STA) or 1 (backhaul STA, can only associate with backhaul AP). Also add new optional parameter to wps_start ubus call of wpa_supplicant to indicate that a Multi-AP backhaul link is required. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* mac80211: rt2x00: replace pending by merged patchesDaniel Golle2019-02-205-5/+10
| | | | | | | | | | | Those have by now been merged into wireless-drivers-next: 17ae2acd1a6f rt2x00: remove unneeded check 5991a2ecd070 rt2x00: remove confusing AGC register 9ad3b5565445 rt2800: enable TX_PIN_CFG_LNA_PE_ bits per band 7aca14885ede rt2800: enable TX_PIN_CFG_RFRX_EN only for MT7620 c7ff1bfeaf1c rt2800: comment and simplify AGC init for RT6352 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 13:22:42 +0000