aboutsummaryrefslogtreecommitdiffstats
path: root/package/kernel/linux
Commit message (Collapse)AuthorAgeFilesLines
* kernel: modules: package kmod-crypto-essivDaniel Golle2022-09-181-0/+12
| | | | | | | Package kernel module providing ESSIV support for block encryption. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 4133102898502c9bb453e8603b6c891aa103bce4)
* kernel: build crypto md5/sha1/sha256 modules for powerpcJosef Schlehofer2022-09-171-1/+19
| | | | | | | | | | | | | | | | | This builds and enables kernel optimized modules for mpc85xx target: - CONFIG_CRYPTO_MD5_PPC [1] - CONFIG_CRYPTO_SHA1_PPC_SPE [2] - CONFIG_CRYPTO_SHA256_PPC_SPE [3] Where it was possible, then use Signal Processing Engine, because CONFIG_SPE is already enabled in mpc85xx config. [1] https://cateee.net/lkddb/web-lkddb/CRYPTO_MD5_PPC.html [2] https://cateee.net/lkddb/web-lkddb/CRYPTO_SHA1_PPC.html [3] https://cateee.net/lkddb/web-lkddb/CRYPTO_SHA256_PPC_SPE.html Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (cherry picked from commit 3a702f8733ff371f30e9e3ba1e1aed5f4686b6b4)
* kernel: kmod-phy-smsc: Add new PHYHauke Mehrtens2022-08-142-1/+17
| | | | | | | | This adds the SMSC PHY which is needed by the kmod-usb-net-smsc95xx driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 5b016a88f92f25dd7d32438bce3a469f343f4009)
* kernel: kmod-phy-ax88796b: Add new PHYHauke Mehrtens2022-08-142-1/+18
| | | | | | | | This adds the AX88796B PHY which is needed by the kmod-usb-net-asix driver. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 712ff388bcd0811256c07e8e1f4b92a007adaa7f)
* kernel: kmod-ipt-ulog: Remove packageHauke Mehrtens2022-08-141-17/+0
| | | | | | | | The ulog iptables target was removed with kernel 3.17, remove the kernel and also the iptables package in OpenWrt too. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit 2a0284fb0325f07e79b9b4c58a7d280ba9999a39)
* kernel: kmod-nft-nat6: Remove packageHauke Mehrtens2022-08-141-11/+0
| | | | | | | | | | | | The nft NAT packages for IPv4 and IPv6 were merged into the common packages with kernel 5.1. The kmod-nft-nat6 package was empty in our build, remove it. Multiple kernel configuration options were also removed, remove them from our generic kernel configuration too. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> (cherry picked from commit b75425370d8de747457c137463bc4d15f6f44d00)
* kernel: ipt-ipset: Add ipset/ip_set_hash_ipmac.koHauke Mehrtens2022-08-141-0/+1
| | | | | | | | Add the ipset/ip_set_hash_ipmac.ko file. The CONFIG_IP_SET_HASH_IPMAC KConfig option is already set by the package. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit 6a2e9f3da6d0f0f3ae382db1e77a65c2f0e67d24)
* kernel: netsupport: kmod-sched: explicitly define included modulesThomas Langer2022-08-141-6/+5
| | | | | | | | | | | Change SCHED_MODULES_EXTRA to an explicit list of modules instead of taking everything that is not filtered out. This removes the need of updating the filter each time an extra sch_*, act_* or similar is added with an own kmod definition. Signed-off-by: Thomas Langer <tlanger@maxlinear.com> Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit 1b956e66ccafc962033260567c2f1e845f71683f)
* kernel: netsupport: kmod-sched: Add kmod-lib-textsearch dependencyHauke Mehrtens2022-08-141-1/+1
| | | | | | | | The CONFIG_NET_EMATCH_TEXT configuration option depends on the kmod-lib-textsearch package. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit 3cc878a8d3e4d2d445bf2ee34883e9326bfa0bb2)
* kernel: netsupport: kmod-sched: Remove sch_fq_codel and sch_fifoHauke Mehrtens2022-08-141-3/+1
| | | | | | | | | | The sch_fq_codel.ko and the sch_fifo.ko are always compiled into the kernel, they are activated in the generic kernel configuration. There is no need to activate the build of these kernel modules in the kmod-sched* packages. Signed-off-by: Hauke Mehrtens <hmehrtens@maxlinear.com> (cherry picked from commit 606e357bf824a314a0c6a147539974e99e8aabe1)
* kernel: scale nf_conntrack_max more reasonablyVincent Pelletier2022-08-111-1/+0
| | | | | | | | | | | | | | | | | | | | Use the kernel's built-in formula for computing this value. The value applied by OpenWRT's sysctl configuration file does not scale with the available memory, under-using hardware capabilities. Also, that formula also influences net.netfilter.nf_conntrack_buckets, which should improve conntrack performance in average (fewer connections per hashtable bucket). Backport upstream commit for its effect on the number of connections per hashtable bucket. Apply a hack patch to set the RAM size divisor to a more reasonable value (2048, down from 16384) for our use case, a typical router handling several thousands of connections. Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> (cherry picked from commit 15fbb916669dcdfcc706e9e75263ab63f9f27c00)
* netfilter: kmod-nft-xfrmFlorian Eckert2022-06-251-0/+11
| | | | | | | Add kmod-nft-xfrm package. Signed-off-by: Florian Eckert <fe@dev.tdt.de> (cherry picked from commit 9379bc2fcf905568ef329a121c8c8a11fc98b02c)
* kernel: crypto: add kmod-crypto-chacha20poly1305Xu Wang2022-06-111-0/+12
| | | | | | | | | Needed by strongSwan IPsec VPN for strongswan-mod-chapoly. Not to be confused with kmod-crypto-LIB-chacha20poly1305, which is an 8-byte nonce version used by wireguard. Signed-off-by: Xu Wang <xwang1498@gmx.com> (cherry picked from commit 197b672c40613a53a78a568a1957f2c23c343c1f)
* kernel: bump 5.10 to 5.10.119John Audia2022-06-072-24/+0
| | | | | | | | | | | Delete the crypto-lib-blake2s kmod package, as BLAKE2s is now built-in. Patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800, x86/64 Signed-off-by: John Audia <therealgraysky@proton.me> (cherry picked from commit cd634afe6cb6565eb6865931c8d73d97cab3600a)
* netfilter: move nf-log modules into separate packagesJo-Philipp Wich2022-04-191-3/+26
| | | | | | | | | Both legacy iptables and nftables require nf-log modules for rule logging, so move them into a separate package both firewall implementations can depend on. Signed-off-by: Jo-Philipp Wich <jo@mein.io> (cherry picked from commit bea01fa57f5c9c333138bbbc5c9f83b9d7553fb5)
* kernel: load device-mapper early on bootDaniel Golle2022-04-051-1/+1
| | | | | | | | | | Previously commit openwrt/packages@3abb7cb ("lvm2: Added script and updated Makefile[...]") couldn't actually work and allow rootfs_data to be stored on a LVM2 as the necessary kernel modules had not been loaded at this point. Fix this by loading device-mapper modules early at boot. Signed-off-by: Daniel Golle <daniel@makrotopia.org> (cherry picked from commit 82f9ad6ab21ca4925278429a3e1b31d26c306d9f)
* kernel: modules: drop 'AddDepends/bluetooth' callsPiotr Dymacz2022-04-051-2/+0
| | | | | | | Function 'AddDepends/bluetooth' doesn't exist in our codebase. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com> (cherry picked from commit 173198e35a898ff7ec97749247f75cd82fa3c3ab)
* kmod-lzo: include the lzo-rle kmod in the packageRui Salvaterra2022-03-221-1/+2
| | | | | | | | | | | Albeit a separate crypto module, lzo-rle uses the same kernel library as lzo. Crypto API users (zram, for example) expect both lzo and lzo-rle to be available, so let's include lzo-rle (about 5.5 kiB) in the lib-lzo package. Based on e9hack's original patch: https://patchwork.ozlabs.org/project/openwrt/patch/541cbfbd-76f2-59b3-a867-47b6f0fc7da9@gmail.com/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> (cherry picked from commit aaa0c09785bee4c9e2baf18c026882d1ff3bacd2)
* kernel/modules: add kmod-inet-diag packageTianling Shen2022-03-131-0/+25
| | | | | | | Add option to compile kmod-inet-diag, support for INET (TCP, DCCP, etc) socket monitoring interface used by native Linux tools such as ss. Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
* kernel: kmod-tcp-scalable: add scalable tcp congestion algorithmCatalin Toda2022-03-011-0/+18
| | | | Signed-off-by: Catalin Toda <catalinii@gmail.com>
* netfilter: add kmod-nft-tproxyYousong Zhou2022-02-281-0/+11
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter: add kmod-nft-socketYousong Zhou2022-02-281-0/+11
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* netfilter: separate packages for kmod-ipt-socket and kmod-ipt-tproxyYousong Zhou2022-02-281-1/+38
| | | | Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* kernel: package ramoops pstore-ram crash log storageHannu Nyman2022-02-242-0/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Package the ability to log kernel crashes to 'ramoops' pstore files into RAM in /sys/fs/pstore Reference to the ramoops admin guide in upstream Linux: https://www.kernel.org/doc/html/v5.10/admin-guide/ramoops.html The files in RAM survive a warm reboot, but not a cold reboot. Note: kmod-ramoops selects kmod-pstore and kmod-reed-solomon. The feature can be used by selecting the kmod-ramoops and adding a ramoops reserved-memory definition to the device DTS. Example from R7800: reserved-memory { rsvd@5fe00000 { reg = <0x5fe00000 0x200000>; reusable; }; ramoops@42100000 { compatible = "ramoops"; reg = <0x42100000 0x40000>; record-size = <0x4000>; console-size = <0x4000>; ftrace-size = <0x4000>; pmsg-size = <0x4000>; }; }; If no definition has been made in DTS, no crash log is stored for the device. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (added CONFIG_EFI_VARS_PSTORE disable)
* kernel: add kmod-hwmon-lm70 supportChristian Lamparter2022-02-191-0/+17
| | | | | | | | package hwmon's lm70.ko. This module supports the National Semiconductor/TI LM70,LM71,LM74 and TI TMP121,TMP122,TMP123 and TMP124 chips (all SPI). Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux/modules: split up oid_registryRosen Penev2022-02-192-2/+12
| | | | | | This will be needed by ksmbd in a following commit. Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel: add package kmod-gpio-cascadeMauri Sandberg2022-02-191-0/+20
| | | | | | | Adds kernel module for Generic GPIO cascade. Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]
* kernel: add package kmod-multiplexerMauri Sandberg2022-02-191-0/+34
| | | | | | | Adds new kernel module for GPIO controlled multiplexer support. Signed-off-by: Mauri Sandberg <maukka@ext.kapsi.fi> Signed-off-by: Petr Štetiar <ynezz@true.cz> [missing commit description]
* kernel: usb: remove left-over LINUX_5_10 dependency symbolChristian Lamparter2022-02-041-1/+1
| | | | | | | | this should have been removed together with linux 5.4 APM821XX support. Currently, this didn't hurt or broke something. But it will in the next stable kernel release. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* netfilter: add kmod-nft-compatEtienne Champetier2022-02-021-0/+11
| | | | | | This modules is required by iptables-nft Signed-off-by: Etienne Champetier <champetier.etienne@gmail.com>
* kernel: add kmod-vrfMarek Behún2022-02-011-0/+17
| | | | | | | | | | | Add option to compile kmod-vrf, support for Virtual Routing and Forwarding (Lite). This module depends on NET_L3_MASTER_DEV, which is a boolean kernel option, so we need to create a configuration option also for this, and make kmod-vrf depend on it. Signed-off-by: Marek Behún <kabel@kernel.org>
* kernel: Make kmod-usb-net-lan78xx depend on kmod-of-mdioHauke Mehrtens2022-02-011-1/+1
| | | | | | | kmod-usb-net-lan78xx depends on kmod-of-mdio when this package is activated. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* netfilter: correct some dependenciesTiago Gaspar2022-01-271-2/+2
| | | | | | | | | | | | nf-nathelper-extra and nf-conntrack-netlink had iptables related dependencies, yet, when looking for the respective kernel symbols and checking it's dependencies it was confirmed that iptables wasn't required and that these were either it's own moodule or tool independent (nftables or iptables). Correct these and make sure no unneeded extras are pulled in. Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
* kernel: add missing kmod+regmap-i2c dependency for NCT7802Y moduleChristian Lamparter2022-01-151-1/+1
| | | | | | | | | | x86, mt7623 and others buildbot failed due to: |Package kmod-hwmon-nct7802 is missing dependencies for the following libraries: |regmap-core.ko |regmap-i2c.ko Fixes: 1ed50b92d157 ("package: kernel: add driver module for NCT7802Y") Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mvebu: cortexa9: Add support for Ctera C200-V2Pawel Dembicki2022-01-151-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 2-Bay NAS - maximum two 3.5" Harddisks Hardware: - SoC: Marvell 88F6707-A1 ARMv7 Processor 1,2GHz (ARMADA 370 SoC) - Ram: 1GB (2x Nanya NT5CC512M8DN-D1) - NAND Flash: 256MB (ESMT F59L2G81A-25T) - Lan: 1x GBE (Marvell 88E1318-NNB2) - Storage: 2x SATA HDD 3.5" Slot - USB: 2x USB 3.0 port (Renesas uPD720202) - Console: Internal J3 connector (1: Vcc, 2: Rx, 3: Tx, 4: GND) - LEDs: 13x GPIO controlled - Buttons: 2x GPIO controlled Known issues: - Buzzer is unused due lack of proper driver - USB1/2 usbport ledtrigger won't work (through DT) - Renesas uPD720202 requires firmware file. It's possible to find non-free binary. Please look for 'UPDATE.mem' file and put in into '/lib/firmware/renesas_usb_fw.mem' file. Installation: - Apply factory initramfs image via stock web-gui. - Do sysupgrade to make installation complete. Back to stock: - OpenWrt rootfs partition use unused space after stock firmware. - Full revert is possible. - Login via ssh and run: ## ctera_c200-v2_back_to_factory start ## . /lib/functions.sh part=$(find_mtd_part "active_bank") active_bank=$(strings "$part" | grep bank) if [ "$active_bank" = "bank1" ]; then echo "bank2" > /tmp/change_bank else echo "bank1" > /tmp/change_bank fi mtd write /tmp/change_bank active_bank reboot ## ctera_c200-v2_back_to_factory end ## Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (put back-to-stock script into commit message, removed dup. SUBPAGESIZE var, added 01_leds for non-working dt-usb-port trigger) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* package: kernel: add driver module for NCT7802YPawel Dembicki2022-01-151-0/+15
| | | | | | | | | | | | This commit add package with hwmon-nct7802 module. This driver implements support for the Nuvoton NCT7802Y hardware monitoring chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan speed sensors. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> (fixed c&p'ed module description) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add kmod-usb-net-lan78xxJosef Schlehofer2022-01-081-0/+17
| | | | | | | | | | | | | | | | | Add kernel module for Microchip LAN78XX based USB 2 & USB 3 10/100/1000 Ethernet adapters. [1] This kernel module is required for the Seeed Studio's Mini Router based on RPI CM4 [2]. [1] <https://cateee.net/lkddb/web-lkddb/USB_LAN78XX.html> [2] <https://www.seeedstudio.com/Dual-GbE-Carrier-Board-with-4GB-RAM-32GB-eMMC-RPi-CM4-Case-p-5029.html> Link: <https://github.com/openwrt/openwrt/pull/4893> Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com> (added kmod-phy-microchip and kmod-fixed-phy dependencies, rpi3 needs lan78xx but has it built-in) Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: provide kmod-fixed-phy as separate kmodChristian Lamparter2022-01-081-2/+17
| | | | | | | | | | Almost all targets have the fixed-phy feature built into the kernel. One big exception is x86. This caused a problem with the upcoming LAN78xx usb driver. Hence this patch breaks out the fixed-phy from of_mdio (which didn't include the .ko) and puts into a separate module. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* kernel: add kmod-phy-microchipChristian Lamparter2022-01-081-0/+15
| | | | | | | | phy drivers for Microchip's LAN88xx PHYs. This is needed for the "LAN7801" variant of the upstream lan78xx usb ethernet driver. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* linux-firmware: add new package r8152-firmwareMarty Jones2022-01-081-0/+1
| | | | | | | | | | | | | | Linux upstream commit https://github.com/torvalds/linux/commit/9370f2d05a2a150b0aa719a3070b26d478180df3 add load firmware file through request_firmware,this affect the nanopi r2s and some USB adapters in kernel 5.10 with this error: 'r8152 4-1:1.0: unable to load firmware patch rtl_nic/rtl8153b-2.fw' This patch split the USB NIC firmware files from r8169 firmware, and adds r8152-firmware to r8152 driver. Add kmod-usb-net-cdc-ncm to support RTL8156A and RTL8156B 2.5G ethernet adapters supported since v5.13-rc1. https://github.com/torvalds/linux/commit/195aae321c829dd1945900d75561e6aa79cce208 Signed-off-by: Marty Jones <mj8263788@gmail.com>
* packages: kernel: add i2c hwmon g762 kmod packagePawel Dembicki2021-12-291-0/+15
| | | | | | | This patch adds kernel module for Global Mixed-mode Technology Inc G762 and G763 fan speed PWM controller chips. Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
* qoriq: new targetStijn Tintel2021-12-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Add a new target named "qoriq", that will support boards using PowerPC processors from NXP's QorIQ brand. This doesn't actually add support for any board yet, so that installation instructions can go in the commit message of the commit that adds actual support for a board. Using CONFIG_E6500_CPU here due to the kernel using -mcpu=powerpc64 rather than -mcpu=e5500 when selecting CONFIG_E5500_CPU. The only difference between e5500 and e6500 is AltiVec support, and the kernel checks for it at runtime. Musl will only check at runtime if AltiVec support is disabled at compile-time, so we need to use e5500 in CPU_TYPE to avoid SIGILL. Math emulation (CONFIG_MATH_EMULATION_HW_UNIMPLEMENTED) is required, as neither e5500 nor e6500 implement fsqrt nor fsqrts, and musl hardcodes sqrt and sqrtf to use these ASM instructions on PowerPC64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Reviewed-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: drop obsolete kmod-video-core dependenciesStijn Tintel2021-12-201-1/+1
| | | | | | These dependencies do not exist in any of the supported kernel versions. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: drop obsolete symbols from kmod-video-coreStijn Tintel2021-12-201-7/+1
| | | | | | These symbols don't exist in any of the supported kernel versions. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* kernel: add kmod-video-gspca-sq930xJosef Schlehofer2021-12-051-0/+15
| | | | | | | | This module adds support for USB WebCams, which uses SQ930X chip [1]. [1] https://cateee.net/lkddb/web-lkddb/USB_GSPCA_SQ930X.html Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* kernel: btrfs: enable ACLJosef Schlehofer2021-12-051-1/+0
| | | | | | | | | | | | | | | | | By default CONFIG_BTRFS_FS_POSIX_ACL is disabled, it should be enabled only when you enable CONFIG_FS_POSIX_ACL. Right now, when you enable CONFIG_FS_POSIX_ACL it will enable CONFIG_BTRFS_FS_POSIX_ACL, but it will be disabled once you install kmod-btrfs. This should prevent it. Btrfs has enabled by default ACL for mount option. More details: https://cateee.net/lkddb/web-lkddb/BTRFS_FS_POSIX_ACL.html https://btrfs.wiki.kernel.org/index.php/Manpage/btrfs(5) Signed-off-by: Josef Schlehofer <josef.schlehofer@nic.cz>
* kernel: add back kmod-leds-tlc591xxMatthew Hagan2021-11-281-0/+18
| | | | | | | | | | | Add back support for the TLC591xx series LEDs which are used in the ipq806x-based Meraki Cryptid series devices. This module previously existed for the mvebu platform but was removed at commit f849c2c83247340d623fdb549e2b75f4c1feea62 due to being enabled in that platform's kernel config. Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
* kernel: add kmod-usb-net-smsc75xxMarius Durbaca2021-11-201-0/+16
| | | | | | add kernel module for smsc75xx based USB 2.0 Gigabit Ethernet devices Signed-off-by: Marius Durbaca <mariusd84@gmail.com>
* kernel: add kmod-ledtrig-patternKarel Kočí2021-11-201-0/+16
| | | | | | | This allows LEDs to be triggered by custom pattern and not just predefined ones. Signed-off-by: Karel Kočí <karel.koci@nic.cz>
* kernel: Add regmap-i2c dependency to sound-soc-imx-sgtl5000Hauke Mehrtens2021-11-071-1/+1
| | | | | | This dependency is needed on the imx/cortexa7 subtarget. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-29 13:55:58 +0000