aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot
Commit message (Collapse)AuthorAgeFilesLines
* package/uboot-envtools: add OpenMesh MR1750v2 supportSven Eckelmann2016-05-231-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* package/uboot-envtools: add OpenMesh OM2P-HSv3 supportSven Eckelmann2016-05-231-0/+1
| | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
* uboot-lantiq: ARV752DPW - use correct switch driverMathias Kresin2016-05-231-1/+1
| | | | | | There is no RTL8206 switch driver. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: VGV7510KW22 - use ddr ram params from brnbootMathias Kresin2016-05-231-5/+5
| | | | Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: VGV7510KW22 - use leds to indicate boot statusMathias Kresin2016-05-231-1/+23
| | | | | | | Switch on the red power led if kernel image can't be loaded. Otherwise switch the green led on. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: VGV7510KW22 - cleanup board configMathias Kresin2016-05-231-60/+3
| | | | | | | | | | | | | | According to the author, all SPI related configs are copy & paste leftovers. Which makes sense since nothing is connected to the SPI bus on this device. The NOR SPL isn't required for this board, since the NOR is directly memory mapped. Allow to overwrite the env in ram while using brn variant. Do not set the power GPIO pin twice. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: reorder and rework patchesMathias Kresin2016-05-2326-814/+706
| | | | | | | | | | | use: - 00nn for u-boot patches - 01nn for new boards While doing the rework, the board definitions for the easy50712 and easy80920 were moved to distinct board definitions patches. Signed-off-by: Mathias Kresin <dev@kresin.me>
* uboot-lantiq: drop unused board patchesMathias Kresin2016-05-237-1387/+6
| | | | | | | None of the boards is supported by lede. No need to keep the patches in the lede tree. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add initial support for SamKnows SK-WB8Andrew Yong2016-05-121-1/+2
| | | | Signed-off-by: Andrew Yong <me@ndoo.sg>
* zynq: Add Zybo device supportJohn Crispin2016-04-261-0/+5
| | | | | | Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> SVN-Revision: 49257
* Zynq: Add Zedboard device supportJohn Crispin2016-04-261-0/+5
| | | | | | | Tested-by: Joe Zhang <jz21082@gmail.com> Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> SVN-Revision: 49256
* lantiq: uboot-envtools on BTHOMEHUBV3AJohn Crispin2016-04-261-0/+3
| | | | | | | | Generate fw_env.config for BTHOMEHUBV3A. Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com> SVN-Revision: 49236
* oxnas: add support for Akitio MyCloud miniHauke Mehrtens2016-04-191-0/+1
| | | | | | Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 49197
* uboot-envtools: add OpenMesh OM5P-ACv2 supportJohn Crispin2016-04-091-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49153
* uboot-envtools: add OpenMesh OM5P-AC supportJohn Crispin2016-04-091-0/+1
| | | | | | Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com> SVN-Revision: 49146
* package: uboot-sunxi: various changes - bump to 2016.03 - add bugfixes ↵Zoltan Herpai2016-03-2925-210/+9835
| | | | | | | | related to 2016.03 update - sync DTS files with mainline - add support for non-standard uEnv.txt - add initial support for Theobroma A31-yQ7 devboard Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 49089
* uboot-mvebu: add packageLuka Perkov2016-03-252-0/+102
| | | | | | | Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr> Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr> SVN-Revision: 49088
* uboot-envtools: add support for ap120cLuka Perkov2016-03-231-0/+1
| | | | | | Signed-off-by: Luka Perkov <luka@openwrt.org> SVN-Revision: 49083
* uboot-zynq: Update to U-Boot 2016.03 releaseJohn Crispin2016-03-231-2/+2
| | | | | | Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> SVN-Revision: 49078
* ramips: Add support for Xiaomi MiWiFi NanoJohn Crispin2016-03-161-1/+2
| | | | | | | | | | | | | | | Xiaomi MiWiFi Nano is based on Mediatek MT7628 with 64MB ram 16MB flash Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com> v3 includes changes suggested by L. D. Pinney & Karl Palsson- Eliminate en25q64 (4MB) flash chip Alphabetization Remove hyphen in model Rename profile from miwifinano.mk to xiaomi.mk Add gpios that are attached to leds SVN-Revision: 49024
* uboot-kirkwood/goflexhome: explicit define the size of the last partitionLuka Perkov2016-03-141-1/+1
| | | | | | | | | Explicit sets the size of the mtdparts, because the kernel has also an explicit value. If they have diffent sizes the ubi won't be detected. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49018
* uboot-kirkwood/goflexhome: add forgotten include openwrt-kirkwood-common.h"Luka Perkov2016-03-141-0/+9
| | | | | | | | | otherwise the uboot is missing important commands like bootz Signed-off-by: Martin Mueller <mm@sig21.net> Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49017
* uboot-kirkwood/goflexhome: update bootargs to use new ubi styleLuka Perkov2016-03-141-0/+30
| | | | | | | | | | Since switching to new ubi(kernel,squashfs,ubifs) layout, the kernel lies in a ubi volume. Dropping the mtd parts because the mtd layout is saved in the device-tree, which is appended to the zImage. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49016
* uboot/kirkwood: correct mtdparts + cmdline for new ubifs on dockstarLuka Perkov2016-03-141-12/+6
| | | | | | Signed-off-by: Alexander Couzens <lynxis@fe80.eu> SVN-Revision: 49012
* uboot-oxnas: fix typo leading to tool not being builtJohn Crispin2016-02-251-1/+1
| | | | | | | | Fixes #21907 Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 48764
* zynq: add new targetJohn Crispin2016-02-121-0/+115
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add support for Xilinx ZC702 Dev board Zynq target is using 4.4 kernel and mainline 2016.1 u-boot. Patch is tested with Xilinx ZC702 Dev board with SD boot mode. known issues: - no QSPI driver in 4.4 kernel: no QSPI flash support - USB is not working in 4.4 kernel Signed-off-by: Jason Wu <jason.wu.misc@gmail.com> create mode 100644 package/boot/uboot-zynq/Makefile create mode 100644 target/linux/zynq/Makefile create mode 100644 target/linux/zynq/base-files.mk create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network create mode 100644 target/linux/zynq/base-files/etc/config/network create mode 100644 target/linux/zynq/base-files/etc/inittab create mode 100644 target/linux/zynq/config-4.4 create mode 100644 target/linux/zynq/image/Makefile create mode 100755 target/linux/zynq/image/mkits.sh create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch create mode 100644 target/linux/zynq/profiles/zc702.mk SVN-Revision: 48697
* packages: uboot-sunxi: fix SATA powerup on BananaproZoltan Herpai2016-02-021-0/+25
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48619
* grub2: switch back to installing to STAGING_DIR_HOSTFelix Fietkau2016-01-211-0/+2
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 48424
* packages: bump uboot-mxs to 2016.01, refresh patchesZoltan Herpai2016-01-193-18/+7
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48374
* packages: bump uboot-sunxi to 2016.01Zoltan Herpai2016-01-152-31/+3
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48252
* packages: bump uboot-sunxi to 2016.01-rc3, along with H3 PSCI/SMP patchesZoltan Herpai2016-01-086-2/+211
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 48154
* uboot-imx6: add support for i.MX6q SABRE boardLuka Perkov2015-12-281-0/+5
| | | | | | | | | | U-boot ships with the `mx6qsabresd` configuration file to configure a bootloader suitable for booting the Freescale i.MX6q SABRE evaluation board from SD card. Expose this option in the uboot-imx6 Makefile. Signed-off-by: Keno Fischer <keno@juliacomputing.com> SVN-Revision: 48014
* packages: bump uboot-sunxi to enable H3 supportZoltan Herpai2015-12-224-330/+14
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 47959
* ar71xx: PowerCloud CR5000 openwrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | OpenWrt configuration part of support for the PowerCloud Systems CR5000. The CR5000 is a dual-band 802.11n wireless router with 8MB flash, 64MB RAM, (unused on stock firmware) USB 2.0 port and five port gigabit ethernet switch. The CR5000 was sold as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47946
* ar71xx: PowerCloud CR3000 OpenWrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | OpenWRt configuration part of support for the PowerCloud Systems CR3000. The CR3000 is a 802.11n 2.4 GHz wireless router with 8MB flash, 64MB RAM, a four port gigabit ethernet switch, and a fast ethernet wan port that was sold by PowerCloud Systems as hardware for the Skydog cloud-managed router service. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47945
* ar71xx: PowerCloud CAP324 OpenWrt configurationFelix Fietkau2015-12-191-0/+1
| | | | | | | | | | | | | | | Openwrt configuration part of support for PowerCloud CAP324 Cloud AP. The CAP324 Cloud AP is a device sold by PowerCloud Systems who's stock firmware (CloudCommand) provides 'cloud' based managment of large numbers access points. The CAP324 is a dual-band 802.11n wireless access point with 16MB flash and 128MB RAM and single gigabit ethernet port. It can be powered via PoE or a wall wart. Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com> SVN-Revision: 47944
* uboot-omap: update to 2015.10John Crispin2015-12-1712-332/+56
| | | | | | | | | | | | | | | | | | | | | | | | | | - tested on Beagleboard C4 - remove upstream patches - disable THUMB mode on OMAP3 this increases binary size (remove CONFIG_SYS_THUMB_BUILD) - reduce SPL size by disabling EXT feature (remove CONFIG_SPL_EXT_SUPPORT) this fixes 2015.07 and 2015.10-rc3 Beagleboard C4 booting which were broken by upstream commit with id: bd2c4522c26d535515aebca52d27c004a7e0c05c Arm THUMB mode is broken because of an yet unknown errata see: http://lists.denx.de/pipermail/u-boot/2015-August/225793.html - backport upstream fix that was introduced in 2015.10-rc5 and was not fixed in 2015.10 final Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de> SVN-Revision: 47924
* uboot-lantiq: fix build with gcc5John Crispin2015-12-113-0/+222
| | | | | | Signed-off-by: Mathias Kresin <openwrt@kresin.me> SVN-Revision: 47863
* uboot-imx6: fix build with gcc-5John Crispin2015-11-244-0/+266
| | | | | | Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> SVN-Revision: 47611
* uboot-omap: fix build with gcc-5Hauke Mehrtens2015-11-207-6/+280
| | | | | | | | This fixes some problems with gcc-5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47539
* uboot-kirkwood: fix build with gcc-5Hauke Mehrtens2015-11-202-1/+88
| | | | | | | | This backports a patch from upstream u-boot to make it compile with gcc-5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47537
* uboot-oxnas: fix build with gcc-5Hauke Mehrtens2015-11-202-6/+88
| | | | | | | | This backports a patch from upstream u-boot to make it compile with gcc-5. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47535
* uboot-mxs: fix build with gcc-5Hauke Mehrtens2015-11-202-29/+12
| | | | | | | | | | gcc-5 handles inline without static differently and that makes uboot-mxs fail to build. Remove the inline so it gets exported and can be used in other functions. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 47533
* packages: uboot-sunxi: update Lamobo R1 patchZoltan Herpai2015-11-191-177/+185
| | | | | | Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 47516
* uboot-envtools: add support for linkits7688dJohn Crispin2015-11-181-0/+1
| | | | | | Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 47500
* uboot-envtools: kirkwood: fix EA35/4500 board namesLuka Perkov2015-11-111-4/+4
| | | | | | Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47457
* kirkwood: rework Linksys EA[34]500 DTSLuka Perkov2015-11-101-1/+1
| | | | | | | | | | | | | | | - Use board engineering names rather than marketing names - Linksys uses a dual firmware layout, where the bootloader will switch to the other stored image when one fails to boot three consecutive times. In order to make this firmware compatible with the factory images and the stock bootloader we must match this layout. Signed-off-by: Claudio Leite <leitec@staticky.com> SVN-Revision: 47429
* uboot-envtools: fix various compile breakage issuesFelix Fietkau2015-11-041-1/+3
| | | | | | Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 47383
* uboot: create the uboot config file for the shelby as wellImre Kaloz2015-11-031-1/+1
| | | | | | | | fixes #20827 Signed-off-by: Imre Kaloz <kaloz@openwrt.org> SVN-Revision: 47365
* uboot-lantiq: Add SoC version 1.2 support for Arcadyan VGV7510KW22John Crispin2015-11-021-2/+5
| | | | | | | | This fixes #20409 Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> SVN-Revision: 47352
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 22:41:30 +0000