aboutsummaryrefslogtreecommitdiffstats
path: root/package/base-files
Commit message (Collapse)AuthorAgeFilesLines
* OpenWrt v23.05.2: adjust config defaultsv23.05.2Hauke Mehrtens2023-11-151-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.1: revert to branch defaultsHauke Mehrtens2023-11-121-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.1: adjust config defaultsv23.05.1Hauke Mehrtens2023-11-121-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* base-files: fix wrong ucidef_set_network_device_mac network-device entryMichael 'ASAP' Weinrich2023-10-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | The ucidef_set_network_device_* functions in uci-defaults.sh disagree on whether to use "network-device" or "network_device" in board.json. With the additional caveat that jshn will translate hyphens (-) into underscores (_). This casues problems in netifd which expected "network_device" causing boards which depend on assigning MACs in board.json via uci-defaults.sh (or jshn in general) to fail. This commit addresses the issue by using network_device in uci-defaults.sh. The bug was uncovered in the forums here: https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/2596 This was exposed by commit 4ebba8a05d09 ("realtek: add support for HPE 1920-8g-poe+") where the board_config_load call from 03_gpio introduced the key normalization by jshn. Fixes: 9290539ca9c7 ("base-files: allow setting device and bridge macs") Tested-by: Stijn Segers <foss@volatilesystems.org> Signed-off-by: Michael 'ASAP' Weinrich <michael@a5ap.net> [ improve commit title, description and fix wrong Tested-by tag ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> (cherry picked from commit 12bc79d6d521581e37a8b067ce8a562429aeefbd)
* OpenWrt v23.05.0: revert to branch defaultsHauke Mehrtens2023-10-111-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.0: adjust config defaultsv23.05.0Hauke Mehrtens2023-10-111-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.0-rc4: revert to branch defaultsHauke Mehrtens2023-09-291-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.0-rc4: adjust config defaultsv23.05.0-rc4Hauke Mehrtens2023-09-291-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* package: base-files: turn error into warningLeon M. Busch-George2023-09-191-2/+1
| | | | | | | | | | | | | | Some users have their routers configured to supply a DHCP range that includes the local interface address. That worked with dnsmasq because it automatically skips the local address. Re-enable those existing configurations for the release and hint at possible future problems. Signed-off-by: Leon M. Busch-George <leon@georgemail.eu> [ wrap commit description and remove unecessary text ] Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* base-files: sysupgrade: Add 2 sec sleep into process KILL loopHannu Nyman2023-09-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add 2 seconds sleep after each forcibly killed/tried-to-kill process in the final process termination loop in sysupgrade stage2. This is needed especially for qualcommax/ipq807x, where ath11k wireless driver may have a long 10-20 seconds delay after termination before actually getting killed. This often breaks sysupgrade. The current KILL loop in kill_remaining does all 10 kill attempts consecutively without any delay, as evidenced here in a failing sysupgrade. It does not allow any time for the process to finalize its internal termination. Sat Sep 2 19:05:56 EEST 2023 upgrade: Sending TERM to remaining processes ... Sat Sep 2 19:05:56 EEST 2023 upgrade: Sending signal TERM to hostapd (2122) Sat Sep 2 19:05:56 EEST 2023 upgrade: Sending signal TERM to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending KILL to remaining processes ... Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2122) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Sending signal KILL to hostapd (2138) Sat Sep 2 19:06:00 EEST 2023 upgrade: Failed to kill all processes. sysupgrade aborted with return code: 256 The change in this commit adds a 2 seconds delay after each kill attempt in order to allow some processes to more gracefully handle their internal termination. The result is like this: Sun Sep 3 11:15:10 EEST 2023 upgrade: Sending TERM to remaining processes ... Sun Sep 3 11:15:10 EEST 2023 upgrade: Sending signal TERM to hostapd (2309) Sun Sep 3 11:15:10 EEST 2023 upgrade: Sending signal TERM to hostapd (2324) Sun Sep 3 11:15:14 EEST 2023 upgrade: Sending KILL to remaining processes ... Sun Sep 3 11:15:14 EEST 2023 upgrade: Sending signal KILL to hostapd (2309) [ 699.827521] br-lan: port 7(hn5wpa2r) entered disabled state [ 699.908673] device hn5wpa2r left promiscuous mode [ 699.908721] br-lan: port 7(hn5wpa2r) entered disabled state [ 701.038029] br-lan: port 6(hn5wpa3) entered disabled state Sun Sep 3 11:15:16 EEST 2023 upgrade: Sending signal KILL to hostapd (2324) [ 702.058256] br-lan: port 5(hn2wlan) entered disabled state [ 709.250063] stage2 (8237): drop_caches: 3 Sun Sep 3 11:15:25 EEST 2023 upgrade: Switching to ramdisk... The delay introduced here only kicks in if there is some process that does not get terminated by the first TERM call. Then there is at least one 2 sec wait after the first KILL loop round. This commit is related to discussion in PRs #12235 and #12632 Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi> Reviewed-by: Robert Marko <robimarko@gmail.com> (cherry picked from commit 47d56ae5463f1965750d3f75390c96d69f969145)
* OpenWrt v23.05.0-rc3: revert to branch defaultsHauke Mehrtens2023-08-201-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.0-rc3: adjust config defaultsv23.05.0-rc3Hauke Mehrtens2023-08-201-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.0-rc2: revert to branch defaultsHauke Mehrtens2023-06-281-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.0-rc2: adjust config defaultsv23.05.0-rc2Hauke Mehrtens2023-06-281-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* base-files: upgrade: nand: add JFFS2 cleanmarkers supportÁlvaro Fernández Rojas2023-06-151-2/+10
| | | | | | | | | Some Broadcom MIPS devices require JFFS2 cleanmarkers to be present on the kernel partition or the bootloader will identify the partition as corrupt and won't boot the kernel. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com> (cherry picked from commit 434df8df549a4d709be9eb19c0d2bd8abb4d4881)
* base-files: enable BPF JIT kallsyms by defaultTony Ambardar2023-06-091-0/+1
| | | | | | | | | | | Set net.core.bpf_jit_kallsyms=1 in /etc/sysctl.d/10-default.conf. For privileged users, this exports addresses of JIT-compiled programs to appear in /proc/kallsyms when present, allowing their use for debugging and in traces. Signed-off-by: Tony Ambardar <itugrok@yahoo.com> (cherry picked from commit b3aaede2a7b14f2be850db8ae0c826e2782a60e8)
* OpenWrt v23.05.0-rc1: revert to branch defaultsHauke Mehrtens2023-06-071-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05.0-rc1: adjust config defaultsv23.05.0-rc1Hauke Mehrtens2023-06-071-2/+2
| | | | Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* OpenWrt v23.05: set branch defaultsChristian Marangi2023-05-211-1/+1
| | | | Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* base-files: add protocol ncm support for ucidef_set_interface()Arınç ÜNAL2023-05-181-0/+1
| | | | | | | Make it possible to set up a default network (interface) for devices with cellular modems using NCM. Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
* base-files: Do not break on non-eth portsOlliver Schinagl2023-05-091-2/+0
| | | | | | | | | | | | | | When using OpenWRT with DSA and 'lan' ports, we could get an empty `next_eth`. This is of course not desirable, as this causes `sh: out of range` errors when trying to determine which one would be greater. It turns out, that we don't even need this check at all because, when looking for all existin eth*s on a system, and take the highest index and then iterate a set of devices and rename to eth${highest_index+n}, it is guaranteed that there will be no conflict. Fixes: b688bf83f9d6 ("base-files: rename ethernet devs on known boards") Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
* base-files: add 'isup' to the wifi scriptAndre Heider2023-04-121-1/+18
| | | | | | | | | | | | | | This is a silent command that allows easy wifi up/down automation for scripts. It takes one or multiple devices as arguments (or all if none are passed), and the exit code indicates if any of those is not up. E.g.: wifi isup && echo "all wifi devices are up" wifi isup radio0 || echo "this wifi is down" Signed-off-by: Andre Heider <a.heider@gmail.com>
* base-files: use named variables in the wifi scriptAndre Heider2023-04-121-2/+2
| | | | | | | Use the already present but unused $cmd and $dev variables instead of positional parameters in ubus_wifi_cmd() to improve readability. Signed-off-by: Andre Heider <a.heider@gmail.com>
* base-files: fix nand_upgrade_ubinized()Rafał Miłecki2023-04-111-1/+3
| | | | | | | | | | | | | | | | | | When using "ubiformat" with stdin it requires passing image size using the -S argument. Provide it just like we do for "ubiupdatevol". This fixes: ubiformat: error!: must use '-S' with non-zero value when reading from stdin This change fixes sysupgrade for bcm53xx and bcm4908 NAND devices possibly some other targets too. Cc: Rodrigo Balerdi <lanchon@gmail.com> Cc: Daniel Golle <daniel@makrotopia.org> Fixes: 971071212052 ("base-files: accept gzipped nand sysupgrade images") Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Daniel Golle <daniel@makrotopia.org> Tested-by: Koen Vandeputte <koen.vandeputte@citymesh.com>
* base-files: add support for retrieving IPv6 assignmentsMark Baker2023-02-241-0/+14
| | | | | | | In DHCPv6-PD enabled environments, addresses are assigned to interfaces. These new functions retrieve the IPv6 assigned prefix(es). Signed-off-by: Mark Baker <mark@vpost.net>
* base-files: sysfixtime: Fix time on the fake RTCYuan Tao2023-02-191-6/+16
| | | | | | | | | | | | | | | On some devices the chip has RTC but no battery save time. This leads back to getting the wrong time and skipping the check of the last file modification date. This commit ensures that the file time is checked even if the RTC exists. which would ordinarily return an approbiate system time used for e.g. certificate generation. Tested-on: NanoPi R2S Signed-off-by: Yuan Tao <ty@wevs.org>
* build: add option to use preinit IP as LAN IPStijn Tintel2023-02-172-0/+20
| | | | | | | | | | | We currently have build options to customize the IP address used in the preinit phase of the boot process, but not to set the default LAN IP. Introduce a boolean build option that, when enabled, results in the IP address configured for the preinit phase, to be also used as the default LAN IP address. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* treewide: replace /sys/devices/virtual/ubi by /sys/class/ubiDaniel Golle2023-02-151-5/+4
| | | | | | | | | | Starting from Linux Kernel version 6.3 UBI devices will no longer be considered virtual, but rather have an MTD device parent. Hence they will no longer be listed under /sys/devices/virtual/ubi which is used in multiple places in OpenWrt. Prepare for future kernels by using /sys/class/ubi instead of /sys/devuces/virtual/ubi. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: ipcalc.sh: fix awk regex syntaxLeon M. George2023-02-071-1/+1
| | | | | | It worked fine before but gawk warns about it. Signed-off-by: Leon M. George <leon@georgemail.eu>
* base-files: ipcalc.sh: trim for statementLeon M. George2023-02-071-2/+8
| | | | | | For gawk compatibility. Signed-off-by: Leon M. George <leon@georgemail.eu>
* base-files: ipcalc.sh: use shebang to invoke awkLeon M. George2023-02-071-3/+1
| | | | | | | | | | | There's hardly an shell logic in ipcalc.sh and a $* that would garble parameter positions. Move the awk invokation to the shebang. A rename from "ipcalc.sh" to "ipcalc" is desirable but could prove tricky with packages in other repositories depending on the filename. Signed-off-by: Leon M. George <leon@georgemail.eu>
* base-files: ipcalc.sh: fail when network is too smallLeon M. George2023-02-071-1/+7
| | | | | | | | It's possible to move range boundaries in a way that the start address lies behind the end address. Detect this condition and exit with an error message. Signed-off-by: Leon M. George <leon@georgemail.eu>
* base-files: ipcalc.sh: don't include own address in rangeLeon M. George2023-02-071-0/+7
| | | | | | Make sure our own address doesn't lie in the calculated range. Signed-off-by: Leon M. George <leon@georgemail.eu>
* base-files: ipcalc.sh: check for params before calculating start/endLeon M. George2023-02-071-12/+13
| | | | | | | With this patch, ipcalc only calculates range boundaries if the corresponding parameters are supplied. Signed-off-by: Leon M. George <leon@georgemail.eu>
* base-files: upgrade: Fix export_partdevice() quotingBrian Norris2023-02-031-1/+1
| | | | | | | | | | $BOOTDEV_MAJOR may be empty for many of the uevents parsed in this function. This condition thus tends to fail benignly (we just skip to the next device), but it can really clutter the stage2 sysupgrade stderr, since it looks like the "=" operand doesn't have an appropriate left-hand argument. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* base-files: fix nand_do_platform_check failChen Minqiang2023-01-291-1/+5
| | | | | | | | | | | | This change ensures compatibility with both types of sysupgrade-tar files. 1. For some boards like xiaomi,redmi-router-ax6s, sysupgrade-tar is pack in directory `vendor,name/` 2. For some boards like xiaomi,mi-router-3g, sysupgrade-tar is pack in directory `vendor_name/` Signed-off-by: Chen Minqiang <ptpt52@gmail.com>
* base-files: Remove nand.sh dependency from emmc upgradeBrian Norris2023-01-213-31/+30
| | | | | | | | | | | | emmc_do_upgrade() relies on identify() from the nand.sh upgrade helper. This only works because FEATURES=emmc targets also tend to include FEATURES=nand. Rename identify_magic() to identify_magic_long() to match the common.sh style and make it clear it pairs with other *_long() variants (and not, say *_word()). Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* base-files: rework mtd_get_mac_text()Michael Pratt2023-01-061-11/+5
| | | | | | | | | | | | | | It's necessary to be able to specify the length for MAC addresses that are stored in flash, for example, in a case where it is stored without any delimiter. Let both offset and length have default values. Add a sanity check related to partition size. Also, clean up syntax and unnecessary lines. Signed-off-by: Michael Pratt <mcpratt@pm.me>
* ramips: add basic support for tp-link er605-v2Nikolay Martynov2023-01-041-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a MT7621-based device with 128MB NAND flash, 256MB RAM, and a USB port. The board has headers to attach console. In order for them to work two solder bridges near those pads need to be made. The defice has the following partition table: ``` 0x000000000000-0x000000080000 : "u-boot" 0x000000080000-0x000000100000 : "u-boot-env" 0x000000100000-0x000000140000 : "factory" 0x000000140000-0x000007e00000 : "firmware" 0x000007e00000-0x000008000000 : "panic-ops" ``` `firmware` partition contains UBI volumes. Unfortunately I accidentally wiped partition and I no longer have access to it. `firmware` partition contains 'secondary' U-Boot which is run by 'first' u-boot. It also contains various configuration partitions that include device info and MAC address. There also seems to be 'primary' and 'backup' set of 'main' volumes. U-boot has `mtkupgrade` command that just overrides data on firmware partitions. Firmware file provided by TP-Link cannot be used with that command. U-boot also has 'recovery' http server. Unfortunately I was not able to make it work with manufacturer's firmware. Manufacturer's firmware essentially contains multiple UBI volumes along with 'partition table'. Unfortunately I no longer can properly run manufacturer's firmware so I cannot at the moment try to a support for building 'factory' images. This patch adds support for initramfs image as well as sysupgrade image. This seems to be pretty standard MT7621 board otherwise. Things that work: * network * leds * usb * factory MAC detection Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
* base-files: stage2: add 'tail' to sysupgrade environmentTony Ambardar2022-12-311-1/+1
| | | | | | | This is used to access footer data in firmare files, and is simpler and less error-prone than using 'dd' with calculated offsets. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* sunxi: ensure NanoPi R1 has unique MAC addressJan-Niklas Burfeind2022-12-251-0/+8
| | | | | | | | | | | | | | | | | | | | Ensure the MAC address for all NanoPi R1 boards is assigned uniquely for each board. The vendor ships the device in two variants; one with and one without eMMC; but both without static mac-addresses. In order to assign both board types unique MAC addresses, fall back on the same method used for the NanoPi R2S and R4S in case the EEPROM chip is not present by generating the board MAC from the SD card CID. [0] https://wiki.friendlyelec.com/wiki/index.php/NanoPi_R1#Hardware_Spec Similar too and based on: commit b5675f500daf ("rockchip: ensure NanoPi R4S has unique MAC address") Co-authored-by: David Bauer <mail@david-bauer.net> Signed-off-by: Jan-Niklas Burfeind <git@aiyionpri.me>
* base-files: sysupgrade-tar: allow separated kernel/rootfs ubiChuanhong Guo2022-12-171-14/+27
| | | | | | | | | | There are some devices putting kernel and rootfs on separated ubi volumes. To make OpenWrt compatible with their bootloader, we need to put kernel and rootfs into separated ubi volumes. Add support for CI_KERN_UBIPART and CI_ROOT_UBIPART for this situation. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* base-files: split ubi attaching out of nand_upgrade_prepare_ubiChuanhong Guo2022-12-171-27/+38
| | | | | | | split ubi reformat/attach into nand_attach_ubi in preparation for reusing this code in other functions. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* base-files: bring back nand_do_upgrade_successDaniel Golle2022-10-301-1/+9
| | | | | | | | | | | | Several Broadcom targets were using the nand_do_upgrade_success shell function which has been removed by commit e25e6d8e54 ("base-files: fix and clean up nand sysupgrade code"). Refactor the new nand_do_upgrade to bring back nand_do_upgrade_success with the behavior expected by those users. Fixes: e25e6d8e54 ("base-files: fix and clean up nand sysupgrade code") Reported-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* base-files: verify nand sysupgrade imagesRodrigo Balerdi2022-10-302-20/+58
| | | | | | | For nand sysupgrade image files having tar/gzip/tgz envelopes, verify envelope integrity before starting sysupgrade. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: accept gzipped nand sysupgrade imagesRodrigo Balerdi2022-10-301-31/+55
| | | | | | | | | | | | | | | | When firmware images only contained compressed kernels and squashfs roots, uncompressed tar files were a good option. We are now using UBIFS images, both raw and tarred, as well as ubinized (full UBI partition) images, all of which benefit greatly from compression. For example, a raw ubinized backup taken from a running Askey RT4230W REV6 (such full backups can be restored via the LUCI's sysupgrade UI) is over 400 MB, but compresses to less than 10 MB. This commit adds support for gzipped versions of all file types already accepted by the nand sysupgrade mechanism, be them raw or tarred. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: fix ubinized nand sysupgradeRodrigo Balerdi2022-10-302-14/+33
| | | | | | | | | | | | It has been reported that ubinized nand sysupgrade fails under certain circumstances, being unable to detach the existing ubi partition due to volumes within the partition being mounted. This is an attempt to solve such issues by unmounting and removing ubiblock devices and unmounting ubi volumes within the target partition prior to detaching and formatting it. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: fix and clean up nand sysupgrade codeRodrigo Balerdi2022-10-301-38/+42
| | | | | | | | | | - Never return from 'nand_do_upgrade', not even in case of errors, as that would cause execution of sysupgrade code not intended for NAND devices. - Unify handling of sysupgrade success and failure. - Detect and report more error conditions. - Fix outdated/incorrect/unclear comments. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
* base-files: wifi: for wifi reconf, scan_wifi after network reloadBob Cantor2022-10-251-1/+1
| | | | | | | | | | | Commit e8b542960921 included an unintended change and we now call scan_wifi before a network reload. Restore the original behaviour and call scan_wifi only after a network reload. Fixes: e8b542960921 ("base-files: wifi: tidy up the reconf code") Signed-off-by: Bob Cantor <bobc@confidesk.com>
* base-files: wifi: for wifi up, scan_wifi after network reloadBob Cantor2022-10-251-1/+1
| | | | | | | | | | | Commit b82cc8071366 included an unintended change and we now call scan_wifi before a network reload. Restore the original behaviour and call scan_wifi only after a network reload. Fixes: b82cc8071366 ("base-files: wifi: swap the order of some ubus calls") Signed-off-by: Bob Cantor <bobc@confidesk.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 13:30:27 +0000