aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* base-files: Ensure reset only works if an overlay existsChris Blake2016-10-271-1/+5
| | | | | | | | | | | | | | Currently the reset script will try to run jffs2reset on boards that are running a rw rootfs, such as ext4. This will cause jffs2reset to fail and the board to never reboot while the LED blinks until a manual reboot. This commit does two different things: 1. Disables reset on boards that do not have an overlay mount 2. Disables the Blinking LED after 5 seconds if the board does not support reset Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* netifd: update to latest git HEADJohn Crispin2016-10-271-3/+3
| | | | Signed-off-by: John Crispin <john@phrozen.org>
* uboot-kirkwood: fix default bootcmd for Seagate DockstarPaul Wassi2016-10-271-1/+1
| | | | | | | Fix the default value for the 'bootcmd' environment variable. Therefore make the default bootcmd work for buildbot's images. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* uboot-kirkwood: bump to upstream 2016.09.01Paul Wassi2016-10-2717-385/+52
| | | | | | | Bump U-Boot for Kirkwood to upstream 2016.09.01. Local patches cleaned up and reworked. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* imx6: Add ds1672 RTC to kernel for working hctosys (Gateworks)Koen Vandeputte2016-10-271-0/+1
| | | | | | | | | | Fixes the same hctosys init issue as described in commit 5481ce9a1157a43d8b2c963e03fb243e70974361 The Gateworks Ventana family uses an emulated Dallas 1672 RTC device. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ar71xx: add support for D-Link DAP-2695 rev. A1Stijn Tintel2016-10-2713-0/+270
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* ar71xx: build relocate stub for generic and legacy imagesStijn Tintel2016-10-272-7/+4
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* ar71xx/base-files: rename 09_fix-trx-header 09_fix-checksumStijn Tintel2016-10-271-0/+0
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* mtd: add fixwrgg commandStijn Tintel2016-10-275-3/+239
| | | | | | | Based on fixseama. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* mtd: fix endianness detection on muslStijn Tintel2016-10-272-0/+2
| | | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* kernel: mtdsplit: add support for WRGG imagesStijn Tintel2016-10-277-0/+119
| | | | | | | | Support splitting WRGG images, found in some D-Link devices (e.g. DAP-2695). Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* firmware-utils: mkwrggimg: new tool for D-Link DAP-2695Stijn Tintel2016-10-272-0/+283
| | | | | | | Based on mkwrgimg.c. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: John Crispin <john@phrozen.org>
* dnsmasq: Multiple dnsmasq instances supportHans Dedecker2016-10-261-185/+270
| | | | | | | | | | | | | | | | | | | Adds support in uci for configuring multiple dnsmasq instances via multiple dnsmasq sections. The uci sections host, boot, mac, tag, vendorclass, userclass, circuitid, ... will refer to a dnsmasq instance via the instance parameter defined in the section; if the instance parameter is not specified backwards compatibility is preserved. Start/Stopping a dnsmasq instance can be achieved by passing the dnsmasq instance name as argument to start/stop via the init script. Multiple dnsmasq instances is usefull in scenarios where you want to bind a dnsmasq instance to an interface in order to isolate networks. This patch is a rework of a multiple dnsmasq instance patch by Daniel Dickinson Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* grub2: add missing SECTION variable and remove non breaking spaceJo-Philipp Wich2016-10-261-1/+2
| | | | | | | | Fix metadata scan failure in the grub2 package by removing an unexpected invisible space character and by adding back the missing SECTION variable which was removed with d140648. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipip: Support fqdn as remote tunnel endpointHans Dedecker2016-10-262-3/+16
| | | | Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uhttpd: create self-signed certificates with unique subjectsHannu Nyman2016-10-261-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | Add a partially random O= item to the certificate subject in order to make the automatically generated certificates' subjects unique. Firefox has problems when several self-signed certificates with CA:true attribute and identical subjects have been seen (and stored) by the browser. Reference to upstream bugs: https://bugzilla.mozilla.org/show_bug.cgi?id=1147544 https://bugzilla.mozilla.org/show_bug.cgi?id=1056341 https://bugzilla.redhat.com/show_bug.cgi?id=1204670#c34 Certificates created by the OpenSSL one-liner fall into that category. Avoid identical certificate subjects by including a new 'O=' item with CommonName + a random part (8 chars). Example: /CN=LEDE/O=LEDEb986be0b/L=Unknown/ST=Somewhere/C=ZZ That ensures that the browser properly sees the accumulating certificates as separate items and does not spend time trying to form a trust chain from them. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* uhttpd: prefer px5g for certificate creationHannu Nyman2016-10-261-2/+2
| | | | | | | Prefer the old default 'px5g' for certificate creation as Firefox seems to dislike OpenSSL-created certs. Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
* netifd: Request DHCP option 121 (classless route) by defaultBaptiste Jonglez2016-10-261-2/+5
| | | | | | | | | | | | | | | | | | | This option, defined by RFC3442, allows a DHCP server to send static routes to a client. But the client has to request this option explicitely. Static routes are useful when the gateway configured by DHCP cannot be in the same subnet as the client. This happens, for instance, when using DHCP to hand out addresses in /32 subnets. A new configuration option "classlessroute" is available, allowing users to disable this feature (the option defaults to true). Other DHCP clients already request this option by default (dhcpcd, for instance, and possibly Windows). If a DHCP server does not support this option, it will simply ignore it. Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
* wwan: rename data filesSimon Hailes2016-10-26348-0/+10
| | | | | | This is to ensure that git can be cloned onto a windows drive without failing. Signed-off-by: Simon Hailes <btsimonh@googlemail.com>
* usbmode: rename data filesSimon Hailes2016-10-262-0/+11
| | | | | | This is to ensure that git can be cloned onto a windows drive without failing. Signed-off-by: Simon Hailes <btsimonh@googlemail.com>
* ar71xx: Ignore firmware building errors of UBNT and CyberTAN devicesChuanhong Guo2016-10-262-13/+14
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* px5g-standalone: move to Encryption submenu and fix TitleAlberto Bursi2016-10-261-1/+2
| | | | | | | | moved px5g-standalone to Encryption submenu of Utilities. Fixed title by removing the first "standalone" word from title. The name is now consistent with other px5g packages, it is also shorter and will be shown in make menuconfig. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* px5g: move to Encryption submenuAlberto Bursi2016-10-261-0/+1
| | | | | | moved px5g to Encryption submenu of Utilities, in an effort to tidy up a bit the Utilities section of make menuconfig. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* package/uboot-envtools: Add support for ZyXEL NBG6817André Valentin2016-10-261-0/+3
| | | | Signed-off-by: André Valentin <avalentin@marcant.net>
* package/basefiles: add mkfs.ext4 and losetup binaries to ramfs listAndré Valentin2016-10-261-0/+2
| | | | | | | mkfs.ext4 und losetup are needed for sysupgrade support on mmc devices with automatic rootfs split (loopback device usage). Signed-off-by: André Valentin <avalentin@marcant.net>
* ipq806x/nbg6817: add sysupgrade supportAndré Valentin2016-10-262-0/+99
| | | | | | Add new way of flashing to mmc devices based on rootfs split with loop devices. Signed-off-by: André Valentin <avalentin@marcant.net>
* linux/mtd: add id for mx25u3235f needed by ZyXEL NBG6817André Valentin2016-10-261-0/+10
| | | | Signed-off-by: André Valentin <avalentin@marcant.net>
* ipq806x/nbg6817: add support for ZyXEL NBG6817André Valentin2016-10-268-8/+400
| | | | | | | | | | | | | | | | | CPU: 2x1.8GHz ARM, RAM: 512MiB Storage: 4MiB serial Flash, 3.9GiB MMC NIC: 2x1GBit/s, Switch with 5 external and 2 internal ports WiFi: Dualband, ath10k 2.4GHz, 5GHz MU-MIMO For installation copy xx-mmcblk0p4-kernel.bin and xx-mmcblk0p5-rootfs-full.bin to device. Then run: cat xx-mmcblk0p4-kernel.bin > /dev/mmc0blk0p4 cat xx-mmcblk0p5-rootfs-full.bin > /dev/mmc0blk0p5 reboot -f For debugging serial console is easily visible on board, no soldering needed. Signed-off-by: André Valentin <avalentin@marcant.net>
* strace: Update to 4.14Daniel Engberg2016-10-261-2/+2
| | | | | | Update to version 4.14 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* lantiq: danube fxs bugfix: changed compatible attribute of vmmcStefan Koch2016-10-261-1/+1
| | | | | | | | This bugfix enables FXS support on dabube based devices. Changed "compatible" attribute from "vmmc" to "vmmc-xway". The vmmc driver uses "vmmc-xway". Signed-off-by: Stefan Koch <stefan.koch10@gmail.com>
* qmi: add metric, defaultroute and peerdns options for qmi protocolMarcin Jurkowski2016-10-261-8/+10
| | | | | | | | | | | | | Adds generic network options for qmi protocol dynamic interfaces as suggested by Felix in https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. IPv6-related code taken from Bruno's patch https://patchwork.ozlabs.org/patch/584816. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com> Signed-off-by: Bruno Randolf <br1@einfach.org>
* mbim: add metric, defaultroute and peerdns options for mbim protocolMarcin Jurkowski2016-10-261-2/+5
| | | | | | | | | | Adds generic network options for mbim protocol dynamic interfaces as suggested by Felix in https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* comgt: add metric, defaultroute and peerdns options for directip protocolMarcin Jurkowski2016-10-261-2/+5
| | | | | | | | | | Adds generic network options for directip protocol dynamic interfaces as suggested by Felix in https://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* comgt: add metric, defaultroute and peerdns options for ncm protocolMarcin Jurkowski2016-10-261-2/+5
| | | | | | | | | | Adds generic network options for ncm protocol dynamic interfaces as suggested by Felix in http://lists.openwrt.org/pipermail/openwrt-devel/2016-February/039794.html. This depends on netifd patch https://patchwork.ozlabs.org/patch/686820/. Signed-off-by: Marcin Jurkowski <marcin1j@gmail.com>
* kirkwood: fix pogo_e02 LED namePaul Wassi2016-10-261-2/+4
| | | | | | | The pogo_e02's dts file has its LEDs named "pogo_e02:(...)" Fix the status-LED's name for this device. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* uboot-zynq: fix compile error for be short of dtcYutang Jiang2016-10-261-1/+2
| | | | | | | | | | | | | | | | | While enable zynq uboot: CONFIG_PACKAGE_uboot-zynq-zc702 CONFIG_PACKAGE_uboot-zynq-zed CONFIG_PACKAGE_uboot-zynq-zybo make will arise dtc error: ./scripts/dtc-version.sh: line 17: dtc: command not found ./scripts/dtc-version.sh: line 18: dtc: command not found *** Your dtc is too old, please upgrade to dtc 1.4 or newer make[4]: *** [checkdtc] Error 1 Pass the kernel dtc to uboot for compile. Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
* grub2: move to Boot Loaders categoryAlberto Bursi2016-10-261-3/+2
| | | | | | | | | | because boot loaders are in Boot Loaders, not in Utilities -> Boot Loaders Also moved brub2-editenv in Utilities -> Boot Loaders Part of a wider housekeeping effort on the packages repository. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* fconfig: move to Boot Loaders submenu of UtilitiesAlberto Bursi2016-10-261-0/+1
| | | | | | Boot Loaders submenu of Utilities is the most logical place to find fconfig and other bootloader tools. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* rbcfg: move to Boot Loaders submenu of UtilitiesAlberto Bursi2016-10-261-0/+1
| | | | | | Boot Loaders submenu of Utilities is the most logical place to find rbcfg and other bootloader tools. Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
* ramips: fix PSG1218 LEDsXuefu Lin2016-10-263-5/+6
| | | | Signed-off-by: Xuefu Lin <xuefulin@gmail.com>
* ar71xx: add support for TP-Link WR802N v1Julius Schulz-Zander2016-10-2612-0/+132
| | | | | | | This patch adds support solely for version 1 of the TP-Link WR802N. It is based on Rick Pannen's patch posted on the OpenWrt devel list. Signed-off-by: Julius Schulz-Zander <julius@inet.tu-berlin.de>
* package/system/mtd: fix usage messagePaul Wassi2016-10-261-1/+1
| | | | | | Minor fix in the usage message on the explanation of the -p option. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* kirkwood: remove redundant code in etc/board.d/02_networkPaul Wassi2016-10-261-10/+5
| | | | | | | | Remove redundant code: merge boards/cases that share the same network configuration. Also fix the alphabetical ordering of the cases. Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: Remove switch config for the MR12/MR16Chris Blake2016-10-261-2/+0
| | | | | | | These boards do not have a switch, so they should have never been added to this file in the first place. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ar71xx: add mac partition to the MR12/MR16Chris Blake2016-10-263-23/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | On the stock Meraki Firmare for the MR12/MR16, a chunk of SPI space after u-boot-env is used to store the boards Mac address. Sadly as this was removed on any device already on OpenWRT/LEDE, moving forward a new, 64k partition named "mac" will be used to store the mac address for the device (which is the minimum size). This allows users to properly set the correct MAC, without editing the ART partition (which holds the same MAC for all devices). The reason the space is taken from kernel instead of rootfs is currently kernels are only 1.3MB, so that way we can leave the current rootfs space alone for users who fully utilize the available storage space. Once this partition is added to a device, you can set your MAC doing the following: mtd erase mac echo -n -e '\x00\x18\x0a\x33\x44\x55' > /dev/mtd5 sync && reboot Where 00:18:0a:33:44:55 is your MAC address. This was tested, and confirmed working on both the MR12 and MR16. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ar71xx: Move MR12 & MR16 from legacy to genericChris Blake2016-10-263-16/+26
| | | | | | | | | | | This moves the Meraki MR12 and Meraki MR16 to the new generic target. Tested and verified working on both devices. Note that kernel/rootfs images are still generated. This is because they are used for the inital flashing process due to the fun pace at which UBoot erases/writes to SPI. Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
* ugps: update to latest git HEADJohn Crispin2016-10-263-2/+5
| | | | | | | * fixes a few error that uClibc users were seeing * add switch to disable time adjustment Signed-off-by: John Crispin <john@phrozen.org>
* imx6: Add ds1307 RTC to kernel for working hctosysPetr Štetiar2016-10-261-0/+2
| | | | | | | | | | | Otherwise if we use ds1307 as kernel module, hctosys fails as ds1307 is being initialized later then hctosys: [ 2.427349] hctosys: unable to open rtc device (rtc0) [ 3.714263] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1 [ 8.990061] rtc-ds1307 3-006f: rtc core: registered mcp7941x as rtc0 Signed-off-by: Petr Štetiar <ynezz@true.cz>
* kirkwood: Add RTC driver to kernel for working hctosysPaul Wassi2016-10-263-6/+6
| | | | | | | Build the RTC driver into the kernel, (and remove the optional module), in order to make hctosys working. (Currently the module is loaded after hctosys has failed previously) Signed-off-by: Paul Wassi <p.wassi@gmx.at>
* ar71xx: Add support to DomyWifi DW33DJing Lin2016-10-2512-0/+235
| | | | Signed-off-by: Jing Lin <mumuqz@163.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-29 19:38:10 +0000