aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* kernel: bump 5.10 to 5.10.50Rui Salvaterra2021-07-1714-21/+21
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.49Rui Salvaterra2021-07-172-3/+3
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.48Rui Salvaterra2021-07-172-3/+3
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.10 to 5.10.47Rui Salvaterra2021-07-173-7/+7
| | | | | | No deleted or manually refreshed patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: bump 5.4 to 5.4.132John Audia2021-07-1734-118/+118
| | | | | | | | | | | | | | | Manually rebased: layerscape/patches-5.4/805-display-0002-drm-rockchip-prepare-common-code-for-cdns-and-rk-dpi.patch All other patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.131John Audia2021-07-171-2/+2
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.130John Audia2021-07-172-3/+3
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* kernel: bump 5.4 to 5.4.129John Audia2021-07-178-14/+14
| | | | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: ipq806x/R7800 Run-tested: ipq806x/R7800 No dmesg regressions, everything functional Signed-off-by: John Audia <graysky@archlinux.us>
* mt76: update to the latest versionFelix Fietkau2021-07-151-3/+3
| | | | | | bbebea7d6dc6 Revert "mt76: fix mt76_rates for the multiple devices" Signed-off-by: Felix Fietkau <nbd@nbd.name>
* procd: update to git HEADDaniel Golle2021-07-152-4/+8
| | | | | | | | | | | 0ee73b2 uxc: implement support for rootfs overlay in containers b0a8ea1 jail: do not hack /etc/resolv.conf on container rootfs 92aba53 jail: increase max additional env records to 64 15997e6 jail: allow rootfs to be a symbolic link 0114c6f jail: open() extroot folder before mounting ed96eda uxc: check for required blockd mounts Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* fstools: update to git HEADDaniel Golle2021-07-151-3/+3
| | | | | | | 3386b6b blockd: fix trigger name cdc9939 blockd: move to its own POSIX process group Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* hostapd: add "force" parameter for channel switchFelix Fietkau2021-07-151-1/+21
| | | | | | | This will restart the interface in case the CSA fails and can be used to force the device on a DFS channel (including full CAC) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mt76: update to the latest versionFelix Fietkau2021-07-141-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 624c681ef0c6 mt76: mt7921: enable VHT BFee capability a27dfcb63ccf mt76: connac: fix UC entry is being overwritten 6b691e62470e mt76: connac: add mt76_connac_power_save_sched in mt76_connac_pm_unref b14365bea586 mt76: mt7921: wake the device before dumping power table 82af16bddfc0 mt76: mt7921: make mt7921_set_channel static b24598b1c1a9 mt76: connac: add mt76_connac_mcu_get_nic_capability utility routine 5954e3381ff9 mt76: testmode: move chip-specific stats dump before common stats fd5b612f9aa4 mt76: mt7915: fix rx fcs error count in testmode d9d26a294f7b mt76: connac: fix the maximum interval schedule scan can support ed39c882f388 mt76: reduce rx buffer size to 2048 60f3d3adbba6 mt76: move mt76_get_next_pkt_id in mt76.h 67ed4d902c84 mt76: connac: check band caps in mt76_connac_mcu_set_rate_txpower 23c6ec49c000 mt76: make mt76_update_survey() per phy 5ca602fb9455 mt76: mt7915: introduce mt7915_mcu_set_txbf() c13df42282e9 mt76: mt7915: improve MU stability dee7dcddcaa0 mt76: use SPDX header file comment style 6fbd47153b3d mt76: mt7915: fix IEEE80211_HE_PHY_CAP7_MAX_NC for station mode 1b97dd1762ca mt76: mt7921: fix sta_state incorrect implementation 1b89053b5a6f mt76: mt7921: improve code readability for mt7921_update_txs 126649816785 mt76: mt7921: limit txpower according to userlevel power a5163ac09be2 mt76: mt7921: introduce dedicated control for deep_sleep e47c04db4d7e mt76: mt7921: fix kernel warning when reset on vif is not sta 063d3611662c mt76: mt7921: fix the coredump is being truncated 12bf28feba7c mt76: fix iv and CCMP header insertion 949327e76ee4 mt76: disable TWT capabilities for the moment 3530254c1bc9 mt76: mt7921: enable HE BFee capability 599e35f5d9b8 mt76: sdio: do not run mt76_txq_schedule directly 3b6d30c28946 mt76: mt7663s: rely on pm reference counting 529d55a79088 mt76: mt7663s: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx path ef44ff116ee2 mt76: mt7663s: enable runtime-pm 3a71e71a555e mt76: mt7615: set macwork timeout according to runtime-pm 925d96e443a4 mt76: mt7921: allow chip reset during device restart 63b114d84361 mt76: mt76x0e: fix device hang during suspend/resume 7f5ea5e2fd10 mt7915: check return code of sysfs_create_link ca64a36908b7 mt76: fix mt76_rates for the multiple devices f517116bf14c mt76: add mt76_default_basic_rate more devices can rely on 6c70b0100513 mt76: mt7921: fix mgmt frame using unexpected bitrate c00a9a6b52af mt76: mt7915: fix mgmt frame using unexpected bitrate 0e4089949565 mt76: mt7921: fix endianness in mt7921_mcu_tx_done_event 55f314120ef2 mt76: mt7921: avoid unnecessary spin_lock/spin_unlock in mt7921_mcu_tx_done_event 541cd3276488 mt76: mt7915: fix endianness warning in mt7915_mac_add_txs_skb 817761e87c4f mt76: mt7921: fix endianness warning in mt7921_update_txs b8eca74bbd7b mt76: mt7615: fix endianness warning in mt7615_mac_write_txwi 5e5e07f0def3 mt76: mt7915: fix potential overflow of eeprom page index abda4cded420 mt76: mt7915: fix info leak in mt7915_mcu_set_pre_cal() 535899f81a46 mt76: mt7915: fix calling mt76_wcid_alloc with incorrect parameter adfa1b9a3ca0 mt76: connac: fix mt76_connac_gtk_rekey_tlv usage 2a65b105ea4a mt76: mt7921: enable aspm by default c57158c82804 mt76: fix build error implicit enumeration conversion 41f607cab83c mt76: mt7921: fix survey-dump reporting 25b4f885a937 mt76: mt76x02: fix endianness warnings in mt76x02_mac.c e63fadb87fe1 mt76: mt7915: report HE MU radiotap 135ef3e9827a mt76: mt7915: adapt new firmware to update BA winsize for Rx session 7118eacb7ce4 mt76: mt7921: add .set_sar_specs support f1f6569da408 mt76: mt7915: fix an off-by-one bound check f7da39467965 mt76 mt7915: take RCU read lock when calling ieee80211_bss_get_elem() 87af8e5c72b1 mt76: mt7915: cleanup -Wunused-but-set-variable 8e2d383fbd92 mt76: mt7915: report tx rate directly from tx status ddce30977591 mt76: mt7915: remove mt7915_sta_stats 4ccd42029519 mt76: mt7921: introduce testmode support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: backport SAR power limit supportFelix Fietkau2021-07-143-7/+456
| | | | | | Needed for an upcoming mt76 update Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: merge a 4-addr client mode fixFelix Fietkau2021-07-141-0/+72
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* mac80211: merge the virtual time based airtime schedulerFelix Fietkau2021-07-144-3/+1430
| | | | | | Improves airtime fairness, especially for devices with larger firmware buffers Signed-off-by: Felix Fietkau <nbd@nbd.name>
* netifd: update to the latest versionFelix Fietkau2021-07-141-3/+3
| | | | | | 7f24a063475e vlan: fix device vlan alias handling Signed-off-by: Felix Fietkau <nbd@nbd.name>
* fstools: update to git HEADDaniel Golle2021-07-142-3/+4
| | | | | | | | 4d4dcfb blockd: detect mountpoint of /dev/mapper/* 2f42515 block: resolve /dev/mapper/* name for /dev/dm-0 when hotplugging 39558a1 blockd: also send ubus notification on mount hotplug Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* glibc: update to latest 2.33 HEAD (bug 28011)Hans Dedecker2021-07-131-2/+2
| | | | | | | b5711025bc x86_64: Remove unneeded static PIE check for undefined weak diagnostic edfd11197e wordexp: handle overflow in positional parameter number (bug 28011) Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* rpcd: update to latest Git HEADJo-Philipp Wich2021-07-131-3/+3
| | | | | | 1fa3576 session: unload rpcd configuration before checking login Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* netifd: update to the latest versionFelix Fietkau2021-07-131-3/+3
| | | | | | | | | | | | | | | f12b073c0cc3 wireless: add some comments to functions b0d090688302 bridge: fix setting pvid for updated vlans ff3764ce28e0 device: move hotplug handling logic from system-linux.c to device.c 16bff892f415 ubus: add a dummy mode ubus call to simulate hotplug events 7f30b02013f2 examples: make dummy wireless vif names shorter 013a1171e9b0 device: do not treat devices with non-digit characters after . as vlan devices f037b082923a wireless: handle WDS per-sta devices db0fa24e1c17 bridge: fix enabling hotplug-added VLANs on the bridge port 4e92ea74273f bridge: bring up pre-existing vlans on hotplug as well 1f283c654aeb bridge: fix hotplug vlan overwrite on big-endian systems Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: fix uninitialized stack variable on CSAFelix Fietkau2021-07-121-0/+25
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: initialize ht/vht/he mode on channel switch by defaultFelix Fietkau2021-07-121-2/+24
| | | | | | Use the current mode, but allow overwriting via ubus command parameters Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: add support for enabling HE on channel switchFelix Fietkau2021-07-121-0/+3
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* hostapd: make it possible to update station airtime weights via ubusFelix Fietkau2021-07-122-0/+99
| | | | | | This allows dynamic tuning based on other runtime information Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-mediatek: several fixes for MT7622Daniel Golle2021-07-114-94/+123
| | | | | | | | | | | | | | | | | | | | | | | | | | | * ! Behavior change ! Old behavior: If the Reset button is held down during power-on do factory reset and try booting recovery from TFTP forever. If valid recovery is received via TFTP, write it to flash and boot. New behavior: If the Reset button is held down during power-on do factory reset, then try TFTP *once*, then try booting on-flash recovery, then keep trying via TFTP forever until a valid image is received. Only if there is no bootable recovery stored on flash, store the downloaded recovery. Then boot it. * Set loadaddr to 0x48000000 in order to allow booting images larger than ~47MB (reported by Oskari Lemmelä). Setting loadaddr to 0x48000000 gives us 384MB on devices with 512MB RAM, which should be more than enough as a maximum size for uImage.FIT to be loaded. * Widely unify device-specific default environment in preparation to auto-generate it from parameters. * backport upstream commit fixing MBR/DOS partitioning Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: fix Wifi MAC address setup for D-Link DIR-853 R1Adrian Schmutzler2021-07-121-3/+3
| | | | | | | | Commands in 10_fix_wifi_mac were not properly concatenated, so this was also triggered for the second phy without giving a MAC address as argument. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for D-Link DIR-853 A3Karim Dehouche2021-07-125-3/+223
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: * SoC: MT7621AT * RAM: 256MB * Flash: 128MB NAND flash * WiFi: MT7615DN (2.4GHz+5Ghz) with DBDC * LAN: 5x1000M * Firmware layout is Uboot with extra 96 bytes in header * Base PCB is DIR-1360 REV1.0 * LEDs Power Blue+Orange,Wan Blue+Orange,WPS Blue,"2.4G"Blue, "5G" Blue, USB Blue * Buttons Reset,WPS, Wifi MAC addresses on OEM firmware: lan factory 0xe000 f4:*:*:a8:*:65 (label) wan factory 0xe006 f4:*:*:a8:*:68 2.4 GHz [not on flash] f6:*:*:c8:*:66 5.0 GHz factory 0x4 f4:*:*:a8:*:66 The increment of the 4th byte for the 2.4g address appears to vary. Reported cases: 5g 2.4g increment f4:XX:XX:a8:XX:66 f6:XX:XX:c8:XX:66 +0x20 x0:xx:xx:68:xx:xx x2:xx:xx:48:xx:xx -0x20 x4:xx:xx:6a:xx:xx x6:xx:xx:4a:xx:xx -0x20 Since increment is inconsistent and there is no obvious pattern in swapping bytes, and the 2.4g address has local bit set anyway, it seems safer to use the LAN address with flipped byte here in order to prevent collisions between OpenWrt devices and OEM devices for this interface. This way we at least use an address as base that is definitely owned by the device at hand. Flashing instruction: The Dlink "Emergency Room" cannot be accessed through the reset button on this device. You can either use console or use the encrypted factory image availble in the openwrt forum. Once the encrypted image is flashed throuh the stock Dlink web interface, the sysupgrade images can be used. Header pins needs to be soldered near the WPS and Wifi buttons. The layout for the pins is (VCC,RX,TX,GND). No need to connect the VCC. the settings are: Bps/Par/Bits : 57600 8N1 Hardware Flow Control : No Software Flow Control : No Connect your client computer to LAN1 of the device Set your client IP address manually to 192.168.0.101 / 255.255.255.0. Call the recovery page or tftp for the device at http://192.168.0.1 Use the provided emergency web GUI to upload and flash a new firmware to the device At the time of adding support the wireless config needs to be set up by editing the wireless config file: * Setting the country code is mandatory, otherwise the router loses connectivity at the next reboot. This is mandatory and can be done from luci. After setting the country code the router boots correctly. A reset with the reset button will fix the issue and the user has to reconfigure. * This is minor since the 5g interface does not come up online although it is not set as disabled. 2 options here: 1- Either run the "wifi" command. Can be added from LUCI in system - startup - local startup and just add wifi above "exit 0". 2- Or add the serialize option in the wireless config file as shown below. This one would work and bring both interfaces automatically at every boot: config wifi-device 'radio0' option serialize '1' config wifi-device 'radio1' option serialize '1' Signed-off-by: Karim Dehouche <karimdplay@gmail.com> [rebase, improve MAC table, update wireless config comment, fix 2.4g macaddr setup] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ath79: add support for TP-Link RE455 v1Roberto Valentini2021-07-116-2/+109
| | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link RE455 v1 is a dual band router/range-extender based on Qualcomm/Atheros QCA9563 + QCA9880. This device is nearly identical to RE450 v3 Specification: - 775 MHz CPU - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 3T3R 5 GHz - 1x 10/100/1000 Mbps Ethernet (AR8033 PHY) - 7x LED, 4x button - UART header on PCB[1] Flash instruction: Apply factory image in OEM firmware web-gui. [1] Didn't work, probably need to short unpopulated resistor R64 and R69 as RE450v3 Signed-off-by: Roberto Valentini <valantin89@gmail.com>
* ramips: add support for Linksys EA8100 v2Tee Hao Wei2021-07-118-4/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Specifications: - SoC: MT7621AT - RAM: 256MB - Flash: 128MB NAND - Ethernet: 5 Gigabit ports - WiFi: 2.4G/5G MT7615N - USB: 1 USB 3.0, 1 USB 2.0 This device is very similar to the EA7300 v1/v2, EA7500 v2, and EA8100 v1. Installation: Upload the generated factory image through the factory web interface. (following part taken from EA7300 v2 commit message:) This might fail due to the A/B nature of this device. When flashing, OEM firmware writes over the non-booted partition. If booted from 'A', flashing over 'B' won't work. To get around this, you should flash the OEM image over itself. This will then boot the router from 'B' and allow you to flash OpenWRT without problems. Reverting to factory firmware: Hard-reset the router three times to force it to boot from 'B.' This is where the stock firmware resides. To remove any traces of OpenWRT from your router simply flash the OEM image at this point. With thanks to Tom Wizetek (@wizetek) for testing. Signed-off-by: Tee Hao Wei <angelsl@in04.sg>
* iwinfo: update to latest Git HEAD and move device info into -data packageJo-Philipp Wich2021-07-111-7/+17
| | | | | | | | | | a0a0e02 iwinfo: rename hardware.txt to devices.txt Also split common devices.txt (former hardware.txt) into a common libiwinfo-data package to allow different libiwinfo versions to coexist without file clashes. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ipq40xx: increase SPI frequency for Zyxel NBG6617Dmitry Tunin2021-07-111-3/+3
| | | | | | | | | | | | The mx25l25635f supports clock speed up to 50Mhz. Also remove obsolete "mx25l25635f" hack and rename the matching device-tree flash node. Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com> [mention node rename as well. chip is very very likely always the "f" revision for all NBG6617] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* procd: update to git HEADDaniel Golle2021-07-101-3/+3
| | | | | | 2dcefbd jail: add support for cgroup devices as in OCI run-time spec Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* lua: make it easier to detect host-built LuaDaniel Golle2021-07-101-2/+6
| | | | | | Install pkg-config file also for host-build, clean up Lua symlinks. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ramips: mt7628an: remove redundant console setup for bootargsAdrian Schmutzler2021-07-102-8/+0
| | | | | | This is already set in mt7628an.dtsi Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* ramips: add support for D-Link DIR-853-R1Stas Fiduchi2021-07-104-0/+161
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This PR adds support for router D-Link DIR-853-R1 Specifications: SoC: MT7621AT RAM: 128MB Flash: 16MB SPI WiFi: MT7615DN (2.4GHz+5Ghz) with DBDC (This mode allows this single chip act as an 2x2 11n radio and an 2x2 11ac radio at the same time) LAN: 5x1000M LEDs Power Blue+Orange,Wan Blue+Orange,WPS Blue,"2.4G"Blue, "5G" Blue USB Blue Buttons Reset,WPS, Wifi MAC addresses: |Interface | MAC | Factory |Comment |------------|-----------------|-------------|---------------- |WAN sticker |C4:XX:XX:6E:XX:2A| |Sticker |LAN |C4:XX:XX:6E:XX:2B| | |Wifi (5g) |C4:XX:XX:6E:XX:2C|0x4 | |Wifi (2.4g) |C6:XX:XX:7E:XX:2C| | | | | | | |C4:XX:XX:6E:XX:2E|0x8004 0xe000| | |C4:XX:XX:6E:XX:2F|0xe006 | The increment of the 4th byte for the 2.4g address appears to vary. Reported cases: 5g 2.4g increment C4:XX:XX:6E:XX:2C C6:XX:XX:7E:XX:2C 0x10 f4:XX:XX:16:XX:32 f6:XX:XX:36:XX:32 0x20 F4:XX:XX:A6:XX:E3 F6:XX:XX:B6:XX:E3 0x10 Since increment is inconsistent and there is no obvious pattern in swapping bytes, and the 2.4g address has local bit set anyway, it seems safer to use the LAN address with flipped byte here in order to prevent collisions between OpenWrt devices and OEM devices for this interface. This way we at least use an address as base that is definitely owned by the device at hand. Flashing instruction: The Dlink "Emergency Room" Connect your client computer to LAN1 of the device Set your client IP address manually to 192.168.0.101 / 255.255.255.0. Then, power down the router, press and hold the reset button, then re-plug it. Keep the reset button pressed until the internet LED stops flashing Call the recovery page or tftp for the device at http://192.168.0.1 Use the provided emergency web GUI to upload and flash a new firmware to the device. Signed-off-by: Stas Fiduchi <fiduchi@protonmail.com> [commit title/message improvements, use correct label MAC address, calculate MAC addresses based on 0x4, minor DTS style fixes, add uart2 to state_default, remove factory image, add 2.4g MAC address, use partition DTSI, add macaddr comment in DTS] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
* treewide: call check-size before append-metadataAdrian Schmutzler2021-07-1023-75/+64
| | | | | | | | | | sysupgrade metadata is not flashed to the device, so check-size should be called _before_ adding metadata to the image. While at it, do some obvious wrapping improvements. Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Paul Spooren <mail@aparcar.org>
* ath79: add missing MTD_NAND_RB91X symbolKoen Vandeputte2021-07-091-0/+1
| | | | | | | Looks like the symbol was forgotten for 5.4 Fixes: 820e660cd7 ("ath79: add NAND driver for MikroTik RB91xG series") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mediatek: prevent duplicate hardware flow offload entriesFelix Fietkau2021-07-081-0/+26
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* kernel: backport a few upstream flow offloading fixesFelix Fietkau2021-07-088-6/+570
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: minew g1-c: add the old device name to the supported devicesAlexander Couzens2021-07-071-0/+1
| | | | | | | Allow to use the sysupgrade image as factory image without additional force. Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ath79: increase SPI frequency for OCEDO boardsDavid Bauer2021-07-073-3/+3
| | | | | | | | | | The MX25L12805D used on all ath79 OCEDO boards supports clock speeds up to 50 MHz. Thus, we can increase the maximum SPI frequency the flash chip is controlled at to 50 MHz, increasing transfer speed. Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: increase WS-AP3610 SPI frequencyDavid Bauer2021-07-071-1/+1
| | | | | | | | The M25P80 used on the Siemens WS-AP3610 supports clock speeds up to 54 MHz. Thus, we can safely increase the maximum SPI frequency the flash chip is controlled at to 50 MHz, increasing transfer speed. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: add HE flag to get_clientsDavid Bauer2021-07-061-0/+1
| | | | | | Expose the hostapd HE flag via ubus to indicate HE capable devices. Signed-off-by: David Bauer <mail@david-bauer.net>
* hostapd: remove unused mac_buff allocationMartin Weinelt2021-07-061-1/+0
| | | | Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
* hostapd: report bssid, ssid and channel over ubusMartin Weinelt2021-07-061-0/+38
| | | | | | | | | Imports a function from iw to convert frequencies to channel numbers. Co-authored-by: David Bauer <mail@david-bauer.net> Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de> [fix potential out of bounds read] Signed-off-by: David Bauer <mail@david-bauer.net>
* scripts: check if dl directory exist in dl_cleanup scriptAnsuel Smith2021-07-051-0/+5
| | | | | | Check if the provided dl directory exist and return on error. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* dnsmasq: use local option for local domain parameterKevin Darbyshire-Bryant2021-07-051-1/+1
| | | | | | | | | '--local' is a synonym for '--server' so let's use '--local' in the resultant config file for uci's 'local' instead of uci's local parameter being turned into '--server'. Slightly less confusion all round. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
* ramips: add support for minew g1-cAlexander Couzens2021-07-053-0/+159
| | | | | | | | | | | | | | | | | | | | | | The minew g1-c is a smart home gateway / BLE gateway. A Nordic nRF52832 is available via USB UART (cp210x) to support BLE. The LED ring is a ring of 24x ws2812b connect to a generic GPIO (unsupported). There is a small LED which is only visible when the device is open which will be used as LED until the ws2812b is supported. The board has also a micro sdcard/tfcard slot (untested). The Nordic nRF52832 exposes SWD over a 5pin header (GND, VCC, SWD, SWC, RST). The vendor uses an older OpenWrt version, sysupgrade can be used via serial or ssh. CPU: MT7628AN / 580MHz RAM: DDR2 128 MiB RAM Flash: SPI NOR 16 MiB W25Q128 Ethernet: 1x 100 mbit (Port 0) (PoE in) USB: USB hub, 2x external, 1x internal to USB UART Power: via micro usb or PoE 802.11af UART: 3.3V, 115200 8n1 Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* ath79: base-files: fix broken network configPetr Štetiar2021-07-051-1/+1
| | | | | | | | | | | | | | Fix bash syntax error introduced in commit cce2e8db564b ("ath79: add support for TP-Link TL-WR941HP v1") which resulted in broken default network configuration. In target/linux/ath79/generic/base-files/etc/board.d/02_network line 402: tplink,tl-wr842n-v2)\ ^-- SC1073: Couldn't parse this case item. Fix to allow more checks. References: https://gitlab.com/ynezz/openwrt-device-runtime-testing/-/jobs/1398837698/artifacts/file/cram-result-archer-c7-v5-initramfs.txt Fixes: cce2e8db564b ("ath79: add support for TP-Link TL-WR941HP v1") Signed-off-by: Petr Štetiar <ynezz@true.cz>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 05:50:59 +0000