aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* realtek: 5.10: refresh kernel patchesChristian Marangi2022-10-251-1/+1
| | | | | | | | | Refresh kernel patches for realtek 5.10 kernel Refreshed patch: - 300-mips-add-rtl838x-platform.patch Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq40xx: convert to DSA and enable Netgear Orbi devicesDavide Fioravanti2022-10-253-8/+51
| | | | | | | | | | Convert to DSA and enable again Netgear Orbi devices: - RBR50 - RBS50 - SRR60 - SRS60 Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* generic: 5.15: add missing CMDLINE_OVERRIDE patchChristian Marangi2022-10-251-0/+37
| | | | | | | | | | | This patch was wrongly dropped with the assumption that it was moved to generic. This wasn't the case and caused the malfunction of the Asrock G10 router. Reintroduce it to fix Asrock G10 functionality. Fixes: 8cc2caed58e7 ("ipq806x: 5:15: add testing kernel version") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: drop mmc-ddr-1_8v from sdcc1 nodeChristian Marangi2022-10-251-0/+26
| | | | | | | | | | | | | | | Zyxel NGB6817 is the only router that use mmc for rootfs. Upstream kernel dtsi have mmc-ddr-1_8v enabled for sddc1. This is wrong as mmc on ipq806x is supplied by a fixed 3.3v regulator and can't operate at 1.8v. This cause the sddc1 to malfunction and cause kernel panic. In old 5.15 version this was disabled but it was put in addition to many other changes so it was dropped silently. Restore this patch to fix working condition of such router. Fixes: 88bf652 ("ipq806x: 5.15: replace dtsi patches with upstream version") Fixes: #11000 Tested-by: Hendrik Koerner <koerhen@web.de> Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: revert unwanted DSA conversion for ASRock G10Christian Marangi2022-10-251-65/+11
| | | | | | | | | | In refreshing DTS to the upstream version an unwanted change slipped in the commit. The ASRock G10 dts got converted to DSA without any support. Revert this to swconfig driver to restore normal functionality. Fixes: 88bf6525251f ("ipq806x: 5.15: replace dtsi patches with upstream version") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* ipq806x: 5.15: backport qcom_nandc patch for unprotected spare data fixChristian Marangi2022-10-251-0/+54
| | | | | | | | | | | We currently ignore ret of the nandc partition parser if unprotected spare data is true. This is the case for ipq806x nand. Backport patch that fix this error and correctly handle error from partition parser. Fixes: ae6a63bc97cf ("ipq806x: 5.15: replace nandc patch with upstream version") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: backport smempart parser fixup patch with EPROBE_DEFER errorChristian Marangi2022-10-251-0/+32
| | | | | | | | | | | Backport patch from kernel 5.15 that mute error on EPROBE_DEFER with smempart parser. This parser require the smem device to be probed first and currently it may happen that mtd gets probed before the smem device causing an error on the smempart parser. This error may be confusing and should be muted. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: backport qcom smem patch for reserved-space supportChristian Marangi2022-10-251-0/+166
| | | | | | | | | | In new kernel version from 5.16, smem node can be declared directly in the reserved-space node. Upstream ipq806x (and to-be-merged) ipq807x allign to this new implementation. Backport this patch to kernel 5.15 to fix support for smem parser for ipq806x target. Fixes: 88bf6525251f ("ipq806x: 5.15: replace dtsi patches with upstream version") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: move not backport patch to pending dirChristian Marangi2022-10-242-0/+0
| | | | | | | Move patch wrongly placed in backport dir to pending dir as they still didn't got merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: move MGLRU patches from pending to backportChristian Marangi2022-10-2411-0/+32
| | | | | | | | Move MGLRU patches from pending to backport as they got merged upstream. These are direct porting from one of the dev so it's better to just move than trying to backport them again from upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: move mvebu aardvark patch from pending to backportChristian Marangi2022-10-247-96/+290
| | | | | | | | Move mvebu aardvark patch from pending to backport as they got merged upstream. One additional patch is needed as a later fixup for it. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: move ZTE MF286D modem patch from pending to backportChristian Marangi2022-10-241-1/+1
| | | | | | | Move ZTE MF286D modem patch from pending to backport as it was merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: move bluetooth mt79 usb id patch from pending to backportChristian Marangi2022-10-241-9/+4
| | | | | | | Move bluetooth mt79 usb id patch from pending to backport as it got merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: move mtk eth soc patch from pending to backportChristian Marangi2022-10-242-38/+11
| | | | | | | Move mtk eth soc patch from pending to backport as it got merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: move sfp HALNy patch from pending to backportChristian Marangi2022-10-249-191/+178
| | | | | | | | Move sfp HALNy patch from pending to backport as they got merged upstream. The patch was reordered and one was squashed in the upstream variant. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: move pending xtx nand patch from pending to backportChristian Marangi2022-10-241-14/+22
| | | | | | | Move pending xtx nand patch from pending to backport as it got merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: move dtc drop interrupt check from pending to backportChristian Marangi2022-10-242-28/+997
| | | | | | | Move dtc drop interrupto check from pending to backport as it got merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* generic: 5.15: move MIPS cpuinfo patch from pending to backportChristian Marangi2022-10-243-136/+224
| | | | | | | Move MIPS cpuinfo patch from pending to backport as it got merged upstream. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
* mac80211: fix masking nested A-MSDU support for meshAndre Heider2022-10-251-1/+1
| | | | | | | | | CONFIG_MAC80211_MESH isn't defined for this package, rendering the patch useless. Match protecting the access of sta_info.mesh with the very same define declaring it. Fixes 45109f69a6 "mac80211: fix compile error when mesh is disabled" Signed-off-by: Andre Heider <a.heider@gmail.com>
* mac80211: use KERNEL_MAKEOPTS instead of KERNEL_MAKE_FLAGSFelix Fietkau2022-10-241-2/+2
| | | | | | Fixes issues with disabling stack validation on non-linux systems Signed-off-by: Felix Fietkau <nbd@nbd.name>
* button-hotplug: simplify buildFelix Fietkau2022-10-243-19/+2
| | | | | | Remove unnecessary kconfig junk Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: add missing WAN LED for Xiaomi Mi Router 4A / 4CShiji Yang2022-10-232-1/+13
| | | | | | The blue WAN LED connected to GPIO37 is missing, so re-add it. Signed-off-by: Shiji Yang <yangshiji66@qq.com>
* toolchain: gcc: Remove gcc 10.x supportHauke Mehrtens2022-10-2321-851/+0
| | | | | | This compiler is old and was never used by default in OpenWrt. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* toolchain: gcc: Remove gcc 8.x supportHauke Mehrtens2022-10-2322-862/+0
| | | | | | This compiler is old and not used by OpenWrt for some time now. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* mac80211: Update to version 5.15.74-1Hauke Mehrtens2022-10-2329-2258/+36
| | | | | | | | This updates mac80211 to version 5.15.74-1 which is based on kernel 5.15.74. The removed patches were applied upstream. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* realtek: consistently flood RMA framesSander Vanheule2022-10-231-30/+40
| | | | | | | | | | | | | | | | The switches support different actions for incoming ethernet multicast frames with Reserved Multicast Addresses (01-80-C2-00-00-{01-2F}). The current code will set the 2-bit action field to FLOOD (0x3) for most classes, but the highest bit is always unset for the relevant control registers. This means the DROP (0x1) action being used for these classes; whatever class the MSB happens to be in. For RTL838x, this results in {20,23-2F} frames being dropped, instead of flooding all ports. On other switch generations, {0F,1F,2F} frames are dropped. This is inconsistent, and appears to be a mistake. Remove this inconsistency by flooding all multicast frames with RMA addresses. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: remove RTL839x path in RTL838x multicastSander Vanheule2022-10-231-19/+14
| | | | | | | | | | | | | | The multicast setup function rtl838x_eth_set_multicast_list() checks if the current SoC is a RTL839x family device. However, the function is only included in the RTL838x ops table, so this path should never be taken, making this dead code. rtl839x_eth_set_multicast_list() is already present in the RTL839x ops table, so it should be safe to remove this branch. While touching the code, also re-sort the functions to match sorting elsewhere, with rtl838x coming before rtl839x. Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: reduce excessive logging for FDB operationsJan Hoffmann2022-10-232-68/+3
| | | | | | | | | | | | Currently several messages at KERN_INFO level are printed for every FDB del/dump operation. This can cause a significant slowdown for example while using "bridge fdb", and may even trigger a watchdog. Remove most of these log messages, as the new L2 table debugfs node should be a good replacement. Change the remaining messages to KERN_DEBUG level. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: add debugfs node for L2 tableJan Hoffmann2022-10-231-0/+107
| | | | | | | This allows to view all unicast and multicast entries that are currently in the L2 hash table and the CAM. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: avoid busy waiting for RTL839x PHY read/writeJan Hoffmann2022-10-231-12/+33
| | | | | | | Switch to a polling implementation similar to the one for RTL838x, to allow other kernel tasks to run while waiting. Signed-off-by: Jan Hoffmann <jan@3e8.eu>
* realtek: disable otto timer for RTL93xx targetsMarkus Stockhausen2022-10-232-0/+2
| | | | | | | | | The new timer is not yet ready for all targets. Avoid interactive questions during build Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [rename symbol to CONFIG_REALTEK_OTTO_TIMER] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: timer driver: activate for RTL839X devicesMarkus Stockhausen2022-10-233-7/+12
| | | | | | | | | Use the new timer driver for the RTL839X devices and remove the no longer needed modules. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [correct timer compatible order, update selected symbols] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: timer driver: activate for RTL838X devicesMarkus Stockhausen2022-10-233-6/+14
| | | | | | | | | Use the new timer driver for the RTL838X devices. Remove the no longer needed modules. Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [correct timer compatible order, update selected symbols] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: timer driver: documentationMarkus Stockhausen2022-10-231-0/+85
| | | | | | | | | Provide some helpful information about the devicetree configuration of our new driver Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [correct compatible order in examples] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* realtek: resurrect timer driverMarkus Stockhausen2022-10-232-0/+338
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Now that we provide a clock driver for the Reltek SOCs the CPU frequency might change on demand. This has direct visible effects during operation - the CEVT 4K timer is no longer a stable clocksource - after CPU frequencies changes time calculation works wrong - sched_clock falls back to kernel default interval (100 Hz) - timestamps in dmesg have only 2 digits left [ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps ... [ 0.060000] pid_max: default: 32768 minimum: 301 [ 0.070000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.080000] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build [ 0.090000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ... Looking around where we can start the CEVT timer for RTL930X is a good basis. Initially it was developed as a clocksource driver for the broken timer in that specific SOC series. Afterwards it was shifted around to the CEVT location, got SMP enablement and lost its clocksource feature. So we at least have something to copy from. As the timers on these devices are well understood the implementation follows this way: - leave the RTL930X implementation as is - provide a new driver for RTL83XX devices only - swap RTL930X driver at a later time Like the clock driver this patch contains a self contained module that is SOC independet and already provides full support for the RTL838X, RTL839X and RTL930X devices. Some of the new (or reestablished) features are: - simplified initialization routines - SMP setup with CPU hotplug framework - derived from LXB clock speed - supplied clocksource - dedicated register functions for better readability - documentation about some caveats Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de> [remove unused header includes, remove old CONFIG_MIPS dependency, add REALTEK_ prefix to driver symbol] Signed-off-by: Sander Vanheule <sander@svanheule.net>
* readline: update to 8.2Nick Hainke2022-10-231-2/+2
| | | | | | | Release Announcement: https://lists.gnu.org/archive/html/info-gnu/2022-09/msg00013.html Signed-off-by: Nick Hainke <vincent@systemli.org>
* gdb: add patch adding support for readline 8.2Nick Hainke2022-10-231-0/+31
| | | | | | | Add "001-Add-support-for-readline-8.2.patch" adding support for readline 8.2. Signed-off-by: Nick Hainke <vincent@systemli.org>
* tools/mkimage: bring back removed patchesDaniel Golle2022-10-233-0/+1612
| | | | | | | | | | | | Patches for mtk_image supporting newer SoCs have been dropped in the process of updating mkimage to U-Boot 2022.10. While it is true that the patches have been merged upstream a while ago, they were not merged in time to be part of the U-Boot 2022.10 release. See also commit 537b423d9f ("uboot-mediatek: update to U-Boot 2022.10") which explicitly mentions that. Fixes: 6e245777bd ("tools/mkimage: update to 2022.10") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ipq40xx: Convert Google Wifi to DSA, reenableBrian Norris2022-10-233-2/+48
| | | | | | | | | | | | | | | | Undo parts of these: 116feb4a1cad ipq40xx: remove non-converted network configs db19efee9512 ipq40xx: disable boards not converted to DSA Reintroduce the DT paths /soc/edma@c080000/gmac{0,1}, because the stock bootloader has memorized them (instead of following aliases); then plug the MAC address back in via 05_set_iface_mac_ipq40xx.sh, since the 'local-mac-address' property is no longer in the correct node. Cc: David Bauer <mail@david-bauer.net> Cc: Robert Marko <robert.marko@sartura.hr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
* ksmbd: update to 3.4.6Nick Hainke2022-10-232-71/+2
| | | | | | | | | | Release Announcement: https://github.com/cifsd-team/ksmbd/releases/tag/3.4.6 Remove upstreamed: - 10-fix-build-on-kernel-5.15.52-or-higher.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
* ipq40xx: convert to DSA and enable mobipromo,cm520-79fJack Chen2022-10-234-6/+36
| | | | | | | Convert to DSA and enable the MobiPromo CM520-79F device again. Signed-off-by: Jack Chen <redchenjs@live.com> Reviewed-by: Robert Marko <robimarko@gmail.com>
* ath79: fix reference clock for RouterBoard 912UAGPavel Kamaev2022-10-231-1/+1
| | | | | | | | | | This fixes reference clock frequency of RB912. 25 MHz frequency leads to system clock running too fast, uptime incrementing too fast and delays (like `sleep 10`) returning too early. Board has quartz with NSK 3KHAA Z 40 000 marking. Signed-off-by: Pavel Kamaev <pavel@kamaev.me>
* ramips: fix WAN mac address allocation for Unielec 01 and 06 modelsDavid Bentham2022-10-233-6/+15
| | | | | | | | | | | | | | | | | | | | | | Manufacturer has predetermined mac address values for lan and wan ports. This change keeps inline with other mt7621 devices mac address allocation from factory mtd partition. Example from hexdump output: 0xe000 0x6 (lan) - 0xe006 0x6 (wan) 0000e000 70 b3 d5 10 02 96 70 b3 d5 10 02 95 ff ff ff ff Previous change had created an overlapping mac address situation as it would increment by one based on the lan mac address location found in the factory partition, which would sometimes increment to the same as the mt7603 wifi chip. Tested on Unielec u7621-01 model Signed-off-by: David Bentham <db260179@gmail.com>
* ramips: rt3883: enable lzma-loader for Belkin F9K1109v1Robert Senderek2022-10-231-1/+1
| | | | | | | Fixes boot loader LZMA decompression issues Fixes: #10968 Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
* ramips: mt7621: enable lzma-loader for Asus RT-N56U-B1Alex Khodin2022-10-231-0/+1
| | | | | | | | Fixes boot loader LZMA decompression issues. Without this change the board end up in a boot loop. Signed-off-by: Alex Khodin <mxktz1@gmail.com>
* ramips: add A-040W-Q alternative name for MSG1500 X.00Chukun Pan2022-10-231-0/+2
| | | | | | | The hardware of Nokia A-040W-Q and RAISECOM MSG1500 X.00 are exactly the same, both of which are customized by operators. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* kernel: move mac-address-ascii patches to genericChukun Pan2022-10-232-4/+4
| | | | | | | This enables other targets to use the mac-address-ascii feature. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
* lantiq: add 6.1 tag to upstream patchAleksander Jan Bajkowski2022-10-232-4/+6
| | | | | | | Add 6.1 tag to upstream patch now that 6.1 got tagged. This permits to track patch in a better way and directly drop them on kernel bump. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
* tools/genext2fs: Add dependency to libtoolHauke Mehrtens2022-10-231-0/+1
| | | | | | | | This fixes the following build error: ./autogen.sh: line 13: aclocal: command not found Fixes: b6d29af9475f ("tools/genext2fs: update to 1.5.0") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
* tools/genext2fs: update to 1.5.0Nick Hainke2022-10-225-638/+9
| | | | | | | | | | | | Update to latest version. Remove patches: - 100-c99_scanf.patch - 200-autoconf.patch - 300-blocksize-creator.patch - 400-byteswap_fix.patch Signed-off-by: Nick Hainke <vincent@systemli.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-11 07:24:09 +0000