aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ipq40xx: 5:15: copy config and patch from 5.10Ansuel Smith2022-05-0126-0/+4445
| | | | | | Copy config and patch from 5.10 to 5.15 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
* ramips: zbt-wg2626: Fix the LAN ports namesAlban Bedel2022-05-011-4/+4
| | | | | | | The current names don't match with the labels on the case, reverse the LAN ports order so they match. Signed-off-by: Alban Bedel <albeu@free.fr>
* ramips: zbt-wg2626: Add the reset gpio for PCIe port 1Alban Bedel2022-05-011-0/+3
| | | | | | | | | | | | | The 2.4GHz interface doesn't come up properly with the log showing: mt7621-pci 1e140000.pcie: pcie1 no card, disable it (RST & CLK) As seen on other MT7621 boards this is caused by a missing reset GPIO. The MT7621 dtsi set GPIO 19 as PCIe reset GPIO, which on this board reset the 5GHz interface on port 0. Add GPIO 8 to the PCIe reset GPIO list to also reset the 2.4GHz interface on port 1. Signed-off-by: Alban Bedel <albeu@free.fr>
* mdadm: update to 4.2Nick Hainke2022-05-015-83/+21
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refreshed patches: - 100-cross_compile.patch Manually refreshed patches: - 200-reduce_size.patch Removed patches: - 101-mdadm.h-Undefine-dprintf-before-redefining.patch - 102-Add-missing-include-file-sys-sysmacros.h.patch Changes: e30ca260 Release mdadm-4.2 8c80d305 Monitor: print message before quit for no array to monitor ced5fa8b mdadm: block creation with long names b71de056 Correct checking if file descriptors are valid b2e4f084 Incremental: Close unclosed mdfd in IncrementalScan() 195d1d76 imsm: assert if there is migration but prev_map doesn't exist 75f3ba25 imsm: free allocated memory in imsm_fix_size_mismatch bce0eab3 Release mdadm-4.2-rc3 4389ce73 imsm: introduce helpers to manage file descriptors 8e1a258e mdadm/Detail: Can't show container name correctly when unpluging disks a35aa68f mdadm/lib: Define a new helper function is_dev_alived 1c66260d Fix 2 dc stream buffer d64a37b9 Assemble: apply sysfs rules 5f6dedfb Fix potential overlap dest buffer a0422106 disallow create or grow clustered bitmap with writemostly set cf16a350 Fix buffer size warning for strcpy 60815698 Refactor parse_num and use it to parse optarg. f7889e51 Fix error message when creating raid 4, 5 and 10 54604768 mdadm: fix coredump of mdadm --monitor -r feeb2785 Utils: Change sprintf to snprintf b8bbf264 Release mdadm-4.2-rc2 e6878148 Assemble: skip devices that don't match uuid instead of aborting the assembly. 0663137c Add monitor delay parameter to mdadm.conf 2b2c5668 tests: Avoid passing chunk size when creating RAID 1 7d374a18 Fix memory leak after "mdadm --detail" 92a647c8 Assemble: start dirty and degraded array. 1c275381 imsm: fix num_data_stripes after raid0 takeover 5b30a34a Add error handling for chunk size in RAID1 3a85bf0e imsm: Fix possible memory leaks and refactor freeing struct dl ccd61ebf mdadm: Fix building errors 601ffa78 Don't associate spares with other arrays during RAID Examine 8d69bf14 Remove Spare drives line from details for external metadata 7d8935cb imsm: correct offset for 4k disks in --examine output dca80fcd Use dev_open in validate geometry container f421731c mdadm/super1: It needs to specify int32 for bitmap_offset 1f5d54a0 Manage: Call validate_geometry when adding drive to external container 8662f92d imsm: Limit support to the lowest namespace fcebeb77 imsm: add devpath_to_char method 7c798f87 imsm: add generic method to resolve "device" links 0530e2e0 Prevent user from using --stop with ambiguous args 83b3de77 Fix some building errors ff904202 imsm: change wrong size verification c11b1c3c Release mdadm-4.2-rc1 aec01630 super-intel.c: Handle errors from calls to get_dev_sector_size() 78c93b00 mdadm: fix growing containers af3396da Monitor: make libudev dependency optional f94df5cf imsm: support for third Sata controller d835518b imsm: nvme multipath support 4036e7ee imsm: extend curr_migr_unit to u64 bdbe7f81 Grow: Block reshape when external metadata and write-intent bitmap 848d71c9 Create: Block automatic enabling bitmap for external metadata 19ad203e imsm: Update-subarray for write-intent bitmap dc95f821 Add "bitmap" to allowed command-line values 69d40de4 imsm: Adding a spare to an existing array with bitmap fbc42556 imsm: Write-intent bitmap support b554ab5c Enable bitmap support for external metadata b090e910 Modify mdstat parsing for volumes with the bitmap db537788 It should be FAILED when raid has not enough active disks c7b8547c imsm: add verbose flag to compare_super 49b69533 mdmonitor: check if udev has finished events processing 0d583954 Document PPL in man md 2f86fda3 imsm: use saved fds during migration f7a6246b super1.c: avoid useless sync when bitmap switches from clustered to none e6561c4d super1: fix Floating point exception 8818d4e7 Grow: be careful of corrupt dev_roles list 4ae96c80 mdadm: fix reshape from RAID5 to RAID6 with backup file 1fe2e100 mdadm/bitmap: locate bitmap calcuate bitmap position wrongly 75562b57 Dump: get stat from a wrong metadata file when restoring metadata 69068584 Incremental: Remove redundant spare movement logic a64f1263 udev: start grow service automatically b4a5ad49 Make target to install binaries only 9c030dad mdadm/Detail: show correct state for clustered array ff6bb131 mdadm: Unify forks behaviour a8f3cfd5 imsm: limit support to first NVMe namespace ca4b156b Monitor: don't use default modes when creating a file b65c1f4a imsm: remove redundant calls to imsm_get_map 895ffd99 imsm: update num_data_stripes according to dev_size ce559078 Create.c: close mdfd and generate uevent c3129b39 Detail: fix segfault during IMSM raid creation 97b51a2c Super1: allow RAID0 layout setting to be removed. 7f3b2d1d Check if other Monitor instance running before fork. cab9c67d mdmonitor: set small delay once 007087d0 Monitor: stop notifing about containers. e2308733 Monitor: refresh mdstat fd after select 2ce09172 Don't create bitmap for raid5 with journal disk 64bf4dff Detail: show correct raid level when the array is inactive 5f418455 manual: update --examine-badblocks 5e592e1e mdadm/md.4: update path to in-kernel-tree documentation 138a9e9b Specify nodes number when updating cluster nodes 77b72fa8 mdadm/Grow: prevent md's fd from being occupied during delayed time bcf40dbb Update link to Intel page for IMSM 8e41153c Use more secure HTTPS URLs 2cf04330 Detect too-small device: error rather than underflow/crash 7758ada9 Block overwriting existing links while manual assembly d92cee7b restripe: fix ignoring return value of ‘read’ and lseek 7d90f760 Include count for \0 character when using strncpy to implement strdup. f4c8a605 uuid.c: split uuid stuffs from util.c 03ab9763 Makefile: add EXTRAVERSION support 3b7aae92 mdcheck: Log when done 7b99edab Assemble.c: respect force flag. ec7d7cee clean up meaning of small typo 5cfb79de Assemble: print error message if mdadm fails assembling with --uuid option 12724c01 Manage, imsm: Write metadata before add 1c294b5d Detail: adding sync status for cluster device 185ec439 Monitor: improve check_one_sharer() for checking duplicated process e1b92ee0 udev: Ignore change event for imsm ba1b3bc8 imsm: show Subarray and Volume ID in --examine output e48aed3c imsm: support the Array Creation Time field in metadata 9e449405 Detail: show correct bitmap info for cluster raid device 06a6101c imsm: Correct minimal device size. 45c43276 imsm: Remove --dump/--restore implementation 3364781b imsm: pass subarray id to kill_subarray function fd38b8ea Remove the legacy whitespace 2551061c mdadm.8: add note information for raid0 growing operation 1e93d0d1 imsm: fill working_disks according to metadata. 42e641ab Add support for Tebibytes 4431efeb imsm: Update grow manual. e1512e7b mdcheck service can't start succesfully because of syntax error 1a874930 Change warning message aced6fc9 Respect $(CROSS_COMPILE) when $(CC) is the default 027c099f Assemble: add support for RAID0 layouts. 329dfc28 Create: add support for RAID0 layouts. 6da53c0e imsm: Change the way of printing nvme drives in detail-platform. b771faef imsm: return correct uuid for volume in detail 4b31846f Remove unused code 9cf361f8 Fix up a few formatting issues 02af3793 Remove last traces of HOT_ADD_DISK 1cc3965d Manage: Remove the legacy code for md driver prior to 0.90.03 761e3bd9 super-intel: don't mark structs 'packed' unnecessarily 85b83a79 SUSE-mdadm_env.sh: handle MDADM_CHECK_DURATION 4ca799c5 mdcheck: use ${} to pass variable to mdcheck 6636788a mdcheck: when mdcheck_start is enabled, enable mdcheck_continue too. 1a1ced1e imsm: allow to specify second volume size b6180160 imsm: save current_vol number 7bd59e79 udev: allow for udev attribute reading bug. 61109314 Don't need to check recovery after re-add when no I/O writes to raid 8063fd0f Init devlist as an array e53cb968 mdadm/md.4: add the descriptions for bitmap sysfs nodes 2c2d9c48 mdadm: force a uuid swap on big endian 43ebc910 mdadm: Introduce new array state 'broken' for raid0/linear fd5b09c9 mdadm: check value returned by snprintf against errors 91c97c54 imsm: close removed drive fd. 1a52f1fc udev: add --no-devices option for calling 'mdadm --detail' d11abe4b mdadm: add --no-devices to avoid component devices detail information 452dc4d1 mdadm.h: include sysmacros.h unconditionally b0681598 mdadm: load default sysfs attributes after assemblation 486720e0 super-intel: Use put_unaligned in split_ull 7039d1f8 mdadm.h: Introduced unaligned {get,put}_unaligned{16,32}() a4f7290c super-intel: Fix issue with abs() being irrelevant 4ec389e3 Enable probe_roms to scan more than 6 roms. ae7d61e3 mdmon: fix wrong array state when disk fails during mdmon startup 3c9b46cf udev: Add udev rules to create by-partuuid for md device 22dc741f Create: Block rounding size to max 05501181 imsm: fix spare activation for old matrix arrays 227aeaa8 add missing units to --examine 2b57e4fe Assemble: Fix starting array with initial reshape checkpoint d2e11da4 mdmon: wait for previous mdmon to exit during takeover 69d08478 mdmon: don't attempt to manage new arrays when terminating 76b906d2 mdadm/tests: add one test case for failfast of raid1 cab114c5 Fix reshape for decreasing data offset e3615ecb Detail.c: do not skip first character when calling xstrdup in Detail() ebf3be99 Fix spelling typos. 9f421827 imsm: fix reshape for >2TB drives a4e96fd8 imsm: finish recovery when drive with rebuild fails 757e5543 policy.c: Fix for compiler error 467e6a1b policy.c: prevent NULL pointer referencing 76d505de Grow: report correct new chunk size. 085df422 Grow: avoid overflow in compute_backup_blocks() 563ac108 Assemble: mask FAILFAST and WRITEMOSTLY flags when finding the most recent device d7a1fda2 imsm: update metadata correctly while raid10 double degradation 7cd7e91a Monitor: add system timer to run --oneshot periodically 4199d3c6 mdcheck: add systemd unit files to run mdcheck. cd72f9d1 policy: support devices with multiple paths. 6b611284 Document PART-POLICY lines 0833f9c3 Assemble: keep MD_DISK_FAILFAST and MD_DISK_WRITEMOSTLY flag Signed-off-by: Nick Hainke <vincent@systemli.org>
* f2fs-tools: fix resize.f2fs (#9800)Kerma Gérald2022-05-012-1/+47
| | | | | | | | | resolve issue - https://github.com/openwrt/openwrt/issues/9800 add the upstream patch: - f2fs-tools.git/patch/?id=f056fbeff08d30a6d9acdb9e06704461ceee3500 Signed-off-by: Kerma Gérald <gandalf@gk2.net>
* uboot-mvebu: update to version v2022.04Josef Schlehofer2022-05-018-524/+2
| | | | | | | | | | | | | | Release announcement: https://lore.kernel.org/u-boot/20220404143253.GQ14476@bill-the-cat/ Release notes between tags: https://source.denx.de/u-boot/u-boot/-/compare/v2022.01...v2022.04?from_project_id=531 All patches were removed, since they are included in this release. Run tested: Turris Omnia, mvebu/cortex-a9, OpenWrt daily snapshots Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* uboot-mvebu: remove enabled CONFIG_CMD_SETEXPRJosef Schlehofer2022-05-011-7/+0
| | | | | | | | | | | | | | | | | | | | | | We don't need to make sure that we want to have enabled CONFIG_CMD_SETEXPR by default, since this is already done in U-boot [1]. This was actually needed only for clearfog board [2], which was added in commit: da0005a6d08ae33d958a6d8a6c0c12dc07b5b2b8 ("uboot-mvebu: add patch to enable setexpr for clearfog boards) and send to U-boot to fix it properly. After a while, there was added support for Turris Omnia, which uses setexpr as well [3], but for this board, there are no fixes needed in U-boot and that's why we can remove this option here. It is helpful with shell scripting. If some downstream distributions are using it, they should correct it in defconfig for related boards. [1] https://source.denx.de/u-boot/u-boot/-/blob/e95afa56753cebcd20a5114b6d121f281b789006/cmd/Kconfig#L1504 [2] https://github.com/openwrt/openwrt/blob/852126680e21edc71c0c66561ae5a6d7479dcc67/target/linux/mvebu/image/clearfog.bootscript#L7 [3] https://github.com/openwrt/openwrt/blob/852126680e21edc71c0c66561ae5a6d7479dcc67/target/linux/mvebu/image/turris-omnia.bootscript#L2 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* uboot-mvebu: add patch to enable setexpr for clearfog boardsJosef Schlehofer2022-05-011-0/+31
| | | | | | | | | | | | | | Option CMD_SETEXPR is already default in U-boot [1], since this was disabled since initial version for this board, there is send this patch to U-boot mailing list to enable it. It is required to use in OpenWrt bootscript for these boards [2]. [1] https://source.denx.de/u-boot/u-boot/-/blob/e95afa56753cebcd20a5114b6d121f281b789006/cmd/Kconfig#L1504 [2] https://github.com/openwrt/openwrt/blob/852126680e21edc71c0c66561ae5a6d7479dcc67/target/linux/mvebu/image/clearfog.bootscript#L7 Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* ath79: add Netgear WNDAP360Nick Hainke2022-04-304-2/+189
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SoC: Atheros AR7161 RAM: DDR 128 MiB (hynix h5dU5162ETR-E3C) Flash: SPI-NOR 8 MiB (mx25l6406em2i-12g) WLAN: 2.4/5 GHz 2.4 GHz: Atheros AR9220 5 GHz: Atheros AR9223 Ethernet: 4x 10/100/1000 Mbps (Atheros AR8021) LEDs/Keys: 2/2 (Internet + System LED, Mesh button + Reset pin) UART: RJ45 9600,8N1 Power: 12 VDC, 1.0 A Installation instruction: 0. Make sure you have latest original firmware (3.7.11.4) 1. Connect to the Serial Port with a Serial Cable RJ45 to DB9/RS232 (9600,8N1) screen /dev/ttyUSB0 9600,cs8,-parenb,-cstopb,-hupcl,-crtscts,clocal 2. Configure your IP-Address to 192.168.1.42 3. When device boots hit spacebar 3. Configure the device for tftpboot setenv ipaddr 192.168.1.1 setenv serverip 192.168.1.42 saveenv 4. Reset the device reset 5. Hit again the spacebar 6. Now load the image via tftp: tftpboot 0x81000000 INITRAMFS.bin 7. Boot the image: bootm 0x81000000 8. Copy the squashfs-image to the device. 9. Do a sysupgrade. https://openwrt.org/toh/netgear/wndap360 The device should be converted from kmod-owl-loader to nvmem-cells in the future. Nvmem cells were not working. Maybe ATH9K_PCI_NO_EEPROM is missing. That is why this commit is still using kmod-owl-loader. In the future the device tree may look like this: &ath9k0 { nvmem-cells = <&macaddr_art_120c>, <&cal_art_1000>; nvmem-cell-names = "mac-address", "calibration"; }; &ath9k1 { nvmem-cells = <&macaddr_art_520c>, <&cal_art_5000>; nvmem-cell-names = "mac-address", "calibration"; }; &art { ... cal_art_1000: cal@1000 { reg = <0x1000 0xeb8>; }; cal_art_5000: cal@5000 { reg = <0x5000 0xeb8>; }; }; Signed-off-by: Nick Hainke <vincent@systemli.org>
* ath79: add USB power control for GL-AR300M seriesPtilopsisLeucotis2022-04-302-0/+17
| | | | | | | | | | Add USB power control in DTS for GL.iNet models: - AR300M; - AR300M-Ext; - AR300M16; - AR300M16-Ext. Signed-off-by: PtilopsisLeucotis <PtilopsisLeucotis@yandex.com>
* ath79: add support for TP-Link Deco M4R v1 and v2Foica David2022-04-304-0/+169
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This commit adds support for the TP-Link Deco M4R (it can also be M4, TP-Link uses both names) v1 and v2. It is similar hardware-wise to the Archer C6 v2. Software-wise it is very different. V2 has a bit different layout from V1 but the chips are the same and the OEM firmware is the same for both versions. Specifications: SoC: QCA9563-AL3A RAM: Zentel A3R1GE40JBF Wireless 2.4GHz: QCA9563-AL3A (main SoC) Wireless 5GHz: QCA9886 Ethernet Switch: QCA8337N-AL3C Flash: 16 MB SPI NOR Flashing: The device's bootloader only accepts images that are signed using TP-Link's RSA key, therefore this way of flashing is not possible. The device has a web GUI that should be accessible after setting up the device using the app (it requires the app to set it up first because the web GUI asks for the TP-Link account password) but for unknown reasons, the web GUI also refuses custom images. There is a debug firmware image that has been shared on the device's OpenWrt forum thread that has telnet unlocked, which the bootloader will accept because it is signed. It can be used to transfer an OpenWrt image file over to the device and then be used with mtd to flash the device. Pre-requisites: - Debug firmware. - A way of transferring the file to the router, you can use an FTP server as an example. - Set a static IP of 192.168.0.2/255.255.255.0 on your computer. - OpenWrt image. Installation: - Unplug your router and turn it upside down. Using a long and thin object like a SIM unlock tool, press and hold the reset button on the router and replug it. Keep holding it until the LED flashes yellow. - Open 192.168.0.1. You should see the bootloader recovery's webpage. Choose the debug firmware that you downloaded and flash it. Wait until the router reboots (at this stage you can remove the static IP). - Open a terminal window and connect to the router via telnet (the primary router should have a 192.168.0.1 IP address, secondary routers are different). - Transfer the file over to the router, you can use curl to download it from the internet (use the insecure flag and make sure your source accepts insecure downloads) or from an FTP server. - The router's default mtd partition scheme has kernel and rootfs separated. We can use dd to split the OpenWrt image file and flash it with mtd: dd if=openwrt.bin of=kernel.bin skip=0 count=8192 bs=256 dd if=openwrt.bin of=rootfs.bin skip=8192 bs=256 - Once the images are ready, you have to flash the device using mtd (make sure to flash the correct partitions or you may be left with a hard bricked router): mtd write kernel.bin kernel mtd write rootfs.bin rootfs - Flashing is done, reboot the device now. Signed-off-by: Foica David <superh552@gmail.com>
* ramips: add support for Wavlink WL-WN533A8Davide Fioravanti2022-04-303-0/+43
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Wavlink WL-WN533A8 is an AC3000 router with 5 gigabit ethernet ports and one USB 3.0 port. It's also known as Wavlink QUANTUM T8. Hardware -------- SoC: Mediatek MT7621A RAM: 128MB (Nanya NT5CB64M16GP-EK) FLASH: 16MB NOR (GigaDevice GD25Q127CSIG3) ETH: - 5x 10/100/1000 Mbps Ethernet (4x LAN + 1x WAN) WIFI: - 1x MT7615DN (2x 2x2:2) 2.4GHz and 5GHz DBDC - 1x MT7615NE (4x4:4) 5GHz - 8 external antennas BTN: - 1x Reset button - 1x WPS button - 1x Turbo button - 1x Touchlink button - 1x ON/OFF switch LEDS: - 1x Red led (system status) - 1x Blue led (system status) - 7x Blue leds (wifi led + 5 ethernet ports + power) USB: - 1x USB 3.0 port UART: - 57600-8-N-1 J4 Everything works correctly. Installation ------------ Flash the initramfs image in the OEM firmware interface (http://192.168.10.1/update.shtml). When Openwrt boots, flash the sysupgrade image otherwise you won't be able to keep configuration between reboots. (Procedure tested on fw M33A8.V5030.190716 and M33A8.V5030.201204) Restore OEM Firmware -------------------- Flash the firmware update available online directly from LUCI. You can download it from: https://www.wavlink.com/en_us/firmware/details/f2d247ecba.html Warning: Remember to not keep settings! Warning2: Remember to force the flash. Notes ----- 1) Router mac addresses: LAN XX:XX:XX:XX:XX:63 (factory @ 0xe006) WAN XX:XX:XX:XX:XX:64 (factory @ 0xe000) WIFI 2G/5G XX:XX:XX:XX:XX:65 (factory @ 0x04) WIFI 5G XX:XX:XX:XX:XX:66 (factory @ 0x8004) LABEL XX:XX:XX:XX:XX:65 In OEM firmware the DBDC wifi interfaces have these mac addresses: 2G) 82:XX:XX:XX:XX:65 5G) 80:XX:XX:XX:XX:65 While in OpenWrt the addresses are: 2G) 80:XX:XX:XX:XX:65 5G) 02:XX:XX:XX:XX:65 2) radio0 will show as 2G/5G interface but only 2G is really usable. 3) There is just one wifi led for all wifi interfaces. It currently shows only the radio0 GHz wifi activity. 4) My unit was shipped with M33A8.V5030.190716 firmware which contains the http://192.168.10.1/webcmd.shtml page. Entering "telnetd" in the input box it will start the telnet daemon. Now you can access the telnet console on port 2323 with these credentials: username: admin2860 password: admin 5) The M33A8.V5030.201204 firmware version, doesn't contain anymore the webcmd.shtml page. If your router is shipped with a previous firmware version and you want to back it up, you can follow the back up procedure of the WS-WN583A6. Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* ramips: create shared DTSI for Wavlink WN53XAX devicesDavide Fioravanti2022-04-302-184/+207
| | | | | | | Most of the definitions for WN531A6 will be shared with WN533A8 in a future commit, so put them in a shared DTSI. Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
* mpc85xx: Fix output location of padded dtbMartin Kennedy2022-04-302-3/+3
| | | | | | | | | | | | | | | | | | | | | In commit 7e614820a892 ("mpc85xx: add support for Extreme Networks WS-AP3825i"), we borrowed a recipe convention from apm821xx for device tree blob padding. Unfortunately, in the apm821xx target, the image recipes name the device tree blob differently, meaning that in mpc85xx, the padded dtb is never consumed. Change the definition of `Build/dtb` so that it outputs the padded dtb to the correct location for it to be consumed. Also, rename the recipe to `Build/pad-dtb`, so it is clear we are building and padding the device tree blob. This change fixes Github issue #9779 [1]. [1]: https://github.com/openwrt/openwrt/issues/9779 Fixes: 7e614820a892 ("mpc85xx: add support for Extreme Networks WS-AP3825i") Signed-off-by: Martin Kennedy <hurricos@gmail.com>
* build: don't remove BUILD_LOG_DIR in _cleanHuangbin Zhan2022-04-301-1/+1
| | | | | | | targetclean should not remove BUILD_LOG Fixes: db34b93331e9 (add a version that can be bumped to force toolchain/target rebuild) Signed-off-by: Huangbin Zhan <zhanhb88@gmail.com>
* kernel: 5.15: add missing symbolRobert Marko2022-04-301-0/+1
| | | | | | CONFIG_QCOM_SPMI_ADC_TM5 gets uncovered while building IPQ40xx with 5.15. Signed-off-by: Robert Marko <robert.marko@sartura.hr>
* kernel: bump 5.10 to 5.10.113John Audia2022-04-3015-51/+51
| | | | | | | | | | All patches automatically rebased. Build system: x86_64 Build-tested: bcm2711/RPi4B, mt7622/RT3200 Run-tested: bcm2711/RPi4B, mt7622/RT3200 Signed-off-by: John Audia <graysky@archlinux.us>
* mediatek: build ubnt-ledbar as a moduleChuanhong Guo2022-04-304-4/+18
| | | | | | | | The config for LEDS_UBNT_LEDBAR doesn't stay in mt7629 kconfig because of its I2C dependency. Build it as a module and let buildroot handle this config option instead. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: mt7629: disable auxadc in kconfigChuanhong Guo2022-04-301-0/+1
| | | | | | manually edit kconfig to disable MT6577_AUXADC Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: mt7623: disable various input devicesChuanhong Guo2022-04-301-45/+1
| | | | | | | | Disable support for joysticks, micee and tablets. There's no actual driver selected in kconfig, and including kernel support is just a waste of space. Besides that, I believe nobody wants these on a router. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: mt7622: add irq for spi-nor controllerChuanhong Guo2022-04-301-0/+10
| | | | | | | Save some CPU from unnecessary polling and make SPI flash reading a tiny bit faster. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: remove left-overs from Linux 5.10Daniel Golle2022-04-3049-4508/+0
| | | | | | | | Remove patches and configuration for Linux 5.10 which have been left in the tree despite the target having been switched to Linux 5.15. Fixes: c283defa88 ("mediatek: switch to 5.15") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: enable multi-core schedulingDaniel Golle2022-04-301-0/+1
| | | | | | | | Set CONFIG_SCHED_MC in config-5.15 to have make the scheduler aware of shared caches. Reported-by: Rui Salvaterra <rsalvaterra@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: refresh patches for Linux 5.15Daniel Golle2022-04-3022-147/+53
| | | | | | Run `make target/linux/refresh` to align patches with OpenWrt style. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: backport recent DTS improvements for MT7622 SoCDaniel Golle2022-04-303-0/+360
| | | | | | | | | | | Daniel Golle: 190-arm64-dts-mediatek-mt7622-fix-GICv2-range.patch Rui Salvaterra: 191-arm64-dts-mt7622-specify-the-L2-cache-topology.patch 192-arm64-dts-mt7622-specify-the-number-of-DMA-requests.patch Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: don't parse FIT partition on NAND-backed mtdblockDaniel Golle2022-04-301-4/+3
| | | | | | | | | | | ubiblock devices should be used on NAND flash to store the uImage.FIT in case the bootloader supports that -- otherwise only rootfs is stored in UBI while the uImage.FIT contains only the kernel and dtb. Hence there is no need to enable parsing partitions on NAND mtdblock devices, it is even responsible for the ugly warning on-opening of the mtdblock device now. Just don't do it. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* kernel: backport patch to relax mtdblock NAND warningDaniel Golle2022-04-301-0/+82
| | | | | | | Instead of warning loudly about mtdblock devices being created, rather just warn if they are actually used. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7629: disable mtk thermalChuanhong Guo2022-04-291-0/+1
| | | | | | Manually edit kconfig to disable CONFIG_MTK_THERMAL Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: mt7623: disable ecc engine supportChuanhong Guo2022-04-291-1/+1
| | | | | | There's no board using nand on this target atm. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: mt7623 enable arch-timer with a patchChuanhong Guo2022-04-292-5/+27
| | | | | | | | | Last attempt on this has a typo and doen't work. It seems that this is a common problem occurring on every kernel bump, so let's enforce arch timer support for mt7623 with a patch instead. Fixes: 9a22943eb2 ("mediatek: 5.15: re-enable arch timer on MT7623 as well") Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ipq40xx: 5.10: fix ar40xx driverNick Hainke2022-04-291-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | This commit is completely based on the work of adron-s: https://github.com/openwrt/openwrt/pull/4721#issuecomment-1101108651 The commit fixes the data corruption on TX packets. Packets are transmitted, but their contents are replaced with zeros. This error is caused by the lack of guard (50 ms) intervals between calibration phases. This error is treated by adding mdelay(50) to the calibration function code. In the original qca-ssda code [0], these mdelays were existing, but in the ar41xx.c they are gone. Tested on: - Fritz!Box 4040 - Fritz!Box 7530 - Mikrotik SXTsq 5AC - ZyXEL NBG6617 - [0] https://git.codelinaro.org/clo/qsdk/oss/lklm/qca-ssdk/-/blob/NHSS.QSDK.11.4/src/init/ssdk_init.c#L2072 Suggested-by: Serhii Serhieiev <adron@mstnt.com> Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: Nick Hainke <vincent@systemli.org>
* mediatek: switch to 5.15Chuanhong Guo2022-04-281-2/+1
| | | | | | | | the SPI-NAND driver switch breaks dts compatibility. It's too much work to backport all ECC framework support to 5.10 so let's switch the target to 5.15 instead. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: enable snfi for mt7629Chuanhong Guo2022-04-281-9/+15
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: restore support for Fidelix FM35X1GAChuanhong Guo2022-04-281-0/+122
| | | | | | This patch was dropped when the spi-nand driver got replaced last time. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: add an upstreamed spi-nand driverChuanhong Guo2022-04-2816-351/+3446
| | | | | | | This patch implements the spi-nand controller driver as an ECC-capable spi-mem controller to use the upstream SPI-NAND driver. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: spi-nand: check for 1 byte BBM onlyChuanhong Guo2022-04-281-0/+20
| | | | | | | | the OOB layout in MTK SNFI uses the 2nd byte, and anything using OOB will make the block a bad-block in spi-nand driver. Hack it for now. We need a proper solution upstream. Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: v5.15: backport spi-mem ecc supportChuanhong Guo2022-04-2810-0/+928
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* mediatek: drop spi-nand driver from mtkChuanhong Guo2022-04-2812-4036/+0
| | | | Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* ucode: reorder BuildPackage callsJo-Philipp Wich2022-04-281-1/+1
| | | | | | | | | Ensure that the libucode recipe is processed before the ucode one in order to reliably encode the ABI version into ucode's libucode dependency. Fixes: #9788 Ref: https://forum.openwrt.org/t/fw4-wont-start-after-upgrade/126308 Signed-off-by: Jo-Philipp Wich <jo@mein.io>
* ath79: add support for TP-Link EAP265 HDSander Vanheule2022-04-272-1/+4
| | | | | | | | The EAP265 HD is a rebadged EAP245v3, so images are compatible with both devices. Link: https://fccid.io/TE7EAP265HD/Letter/6-Request-for-FCC-Change-ID-4823578.pdf Signed-off-by: Sander Vanheule <sander@svanheule.net>
* firmware-utils: bump to git HEADSander Vanheule2022-04-271-3/+3
| | | | | | | | | Includes image support for new TP-Link devices: ddc3e00e314d tplink-safeloader: add TP-Link EAP265 HD support ceea1a7fe56e tplink-safeloader: add TP-Link Deco M4R v1 and v2 support Signed-off-by: Sander Vanheule <sander@svanheule.net>
* iwinfo: update to latest HEADDavid Bauer2022-04-271-3/+3
| | | | | | dc6847e iwinfo: nl80211: omit A-hwmode on non-5GHz hardware Signed-off-by: David Bauer <mail@david-bauer.net>
* nat46: update to git HEADHans Dedecker2022-04-261-3/+3
| | | | | | | | | 95ca1c3 nat46-core: ignore IPv4 options when translating packets 39778c2 add a module argument to ignore TOS translate for IPv4 9a36ee1 add a module argument to ignore TOS translate for IPv4 79190a8 add a module argument to ignore TOS translate for IPv4 Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* uboot-envtools: add WS-AP3825i configDavid Bauer2022-04-261-0/+4
| | | | | | | Add configuration to use uboot-envtools with the Extreme Networks WS-AP3825i. Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: set WS-AP3825i mac-address in preinitDavid Bauer2022-04-261-0/+12
| | | | | | | | | The bootloader does seem to not correctly patch in the MAC address for eth0 / eth1 in some cases. While the root cause is not known, manually applying the MAC-Address in preinit does not hurt. Reported-by: Tom Herbers <freifunk@tomherbers.de> Signed-off-by: David Bauer <mail@david-bauer.net>
* mpc85xx: define reset-delay for WS-AP3825i eth PHYDavid Bauer2022-04-261-0/+4
| | | | | | | | | | | | The WS-AP3825i uses Atheros PHYs which according to the datasheet require the reset to be asserted for at least 1 ms. This fixes broken eth1 upon soft-reboot. eth0 is no affected, as the ifup / ifdown cycle in preinit prevents this issue from happening when the system is ready. Reported-by: Tom Herbers <freifunk@tomherbers.de> Signed-off-by: David Bauer <mail@david-bauer.net>
* dnsmasq: add logfacility file to jail mountsDaniel Golle2022-04-251-2/+6
| | | | | | | | If logfacility is a path to a file it needs to be r/w mounted in the sandbox as well for dnsmasq to work. Reported-by: @iointerrupt Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* iwinfo: update to latest HEADDavid Bauer2022-04-241-3/+3
| | | | | | | a479b9b devices: remove whitespace 562d015 iwinfo: nl80211: fix hwmode parsing for multi-band NICs Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: ubnt: drop swconfig on ac-{lite,lr,mesh}Martin Weinelt2022-04-231-0/+3
| | | | | | These don't have switches that could be configured using swconfig. Signed-off-by: Martin Weinelt <hexa@darmstadt.ccc.de>
* ramips: add support for TP-Link RE650 v2Marcin Gordziejewski2022-04-234-1/+209
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link RE650 v2 is largely similar to v1 that is already supported by OpenWrt. Notable differences is differnt SPI Flash - 8 MB instead of 16 MB (from cFeon instead of Winbond) and a different configuration of PCIE connections to wifi chips. Otherwise it's largely the same product as v1 Hardware specification: - SoC 880 MHz - MediaTek MT7621AT - 128 MB of DDR3 RAM - 8 MB - cFeon QH64A-104HIP - 4T4R 2.4 GHz - MediaTek MT7615E - 4T4R 5 GHz - MediaTek MT7615E - 1x 1 Gbps Ethernet - MT7621AT integrated - 7x LEDs (Power, 2G, 5G, WPS(x2), Lan(x2)) - 4x buttons (Reset, Power, WPS, LED) - UART pinout - GND, RX, TX, labeled in the middle of the PCB, requires soldering because they're not through holes. Serial console @ 57600,8n1 Flash instructions: Upload openwrt-ramips-mt7621-tplink_re650-v2-squashfs-factory.bin from the RE650 web interface. TFTP recovery to stock firmware: I didn't try recovering back to the stock firmware, however, if there is such process for other RExxx devices, it seems like it could be similar here. Signed-off-by: Marcin Gordziejewski <openwrt@flicksfix.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-16 08:12:37 +0000