aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
...
* ath79: port cybertan_part from ar71xxChristian Lamparter2018-09-103-0/+183
| | | | | | | | | | | | | This patch ports the cybertan_part code from ar71xx and converts the driver to a DT-supported mtd parser. As a result, it will no longer add the u-boot, nvram and art partitions, which were never part of the special Cybertan header. Instead these partitions have to be specified in the DT, which has the upside of making it possible to add properties (i.e.: read-only), labels and references to these important partitions. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* mac80211: add iw command wrapper with error loggingRafał Miłecki2018-09-101-0/+4
| | | | | | | | | | | | | | | | | | | | | Currently it's close to impossible to tell what part of mac80211 setup went wrong. Errors logged into system log look like this: radio0 (6155): command failed: No error information (-524) radio0 (6155): command failed: Not supported (-95) radio0 (6155): command failed: I/O error (-5) radio0 (6155): command failed: Too many open files in system (-23) With this commit change it's getting clear: command failed: No error information (-524) Failed command: iw dev wlan0 del command failed: Not supported (-95) Failed command: iw phy phy0 set antenna_gain 0 command failed: I/O error (-5) Failed command: iw phy phy0 set distance 0 command failed: Too many open files in system (-23) Failed command: iw phy phy0 interface add wlan0 type __ap Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* hostapd: Fix compile with OpenSSL 1.1.0 + no deprecated APIsRosen Penev2018-09-101-0/+40
| | | | | | | | Patch was accepted upsteam: https://w1.fi/cgit/hostap/commit/?id=373c796948599a509bad71695b5b72eef003f661 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* zynq: rename zedboard with correct manufacturerLuis Araneda2018-09-103-9/+51
| | | | | | | | | The board is made by Avnet, so rename it accordingly as upstream has done it Also move the device to maintain alphabetic order Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: add sdcard image supportLuis Araneda2018-09-103-2/+48
| | | | | | | | | | | | | | | Implement the generation of sdcard images with ext4 or squashfs + f2fs overlay, but only enable the latter automatically Additionally, add mkf2fs and e2fsprogs to default packages to manipulate ext4 and f2fs filesystems Finally, disable the automatic generation of initramfs and rootfs.tar.gz images, as they are no longer required (they can still be selected in menuconfig) Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: enable kernel overlay and f2fs supportLuis Araneda2018-09-101-1/+6
| | | | | | | Select configs to enable build-in F2FS support and use the overlayfs provided by generic config Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* zynq: remove bootargs from kernel configLuis Araneda2018-09-101-2/+0
| | | | | | | | Use options from generic instead of target-specific, as the bootargs are now passed by the bootloader and can be device-specific Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-zynq: use a file to modify the default environmentLuis Araneda2018-09-102-0/+3
| | | | | | | | | Follow the strategy of other targets and create a default environment file, uEnv.txt, to configure the behavior of U-Boot. For now, use it to pass bootargs to the kernel Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-zynq: copy U-Boot images to STAGING_DIRLuis Araneda2018-09-101-0/+9
| | | | | | | | | | | Create a directory inside STAGING_DIR and copy U-Boot output images, so they can be used later when creating the sdcard image Additionally, like others targets, override the default install method to avoid copying the images to bin directory Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-zynq: automatically select the appropriate variantLuis Araneda2018-09-101-0/+5
| | | | | | | | Select the U-Boot variant automatically based on the current selected device, and hide the package from menuconfig Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* uboot-zynq: remove ZC706 boardLuis Araneda2018-09-101-4/+0
| | | | | | | The board was added when creating the target, but the corresponding device was never defined inside the target Signed-off-by: Luis Araneda <luaraneda@gmail.com>
* dnsmasq: bump to dnsmasq 2.80test6Hans Dedecker2018-09-092-4/+4
| | | | | | | | | | | | | | | | Refresh patches Changes since latest bump: af3bd07 Man page typo. d682099 Picky changes to 47b45b2967c931fed3c89a2e6a8df9f9183a5789 47b45b2 Fix lengths of interface names 2b38e38 Minor improvements in lease-tools 282eab7 Mark die function as never returning c346f61 Handle ANY queries in context of da8b6517decdac593e7ce24bde2824dd841725c8 03212e5 Manpage typo. Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* tools/cmake: Update to 3.12.2Daniel Engberg2018-09-091-2/+2
| | | | | | Update CMake to 3.12.2 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* curl: Update to 7.61.1Daniel Engberg2018-09-091-3/+3
| | | | | | Update curl to 7.61.1 Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
* scripts/ipkg-build: quash error messages when conffiles.resolved is emptyYousong Zhou2018-09-091-2/+4
| | | | | | | | | | | | | | | When Package/xx/conffiles only contains directories that are empty at package time, conffiles.resolved will be missing and the following error messages will appear in the build log. /home/yousong/git-repo/openwrt/openwrt/scripts/ipkg-build -c -o 0 -g 0 /home/yousong/git-repo/openwrt/openwrt/build_dir/target-mips_24kc_musl/linux-malta_be/openvswitch-2.10.0/ipkg-mips_24kc/openvswitch-common /home/yousong/git-repo/openwrt/openwrt/bin/packages/mips_24kc/packages mv: cannot stat 'CONTROL/conffiles.resolved': No such file or directory chmod: cannot access 'CONTROL/conffiles': No such file or directory It will not break the ipkg-build process. The change is merely cosmetic to not cause confusion when reading logs Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* scripts/metadata.pm: avoid adding dup names in provides listYousong Zhou2018-09-091-0/+1
| | | | | | | | | | | | The need arises from building Open vSwitch kernel datapath modules, e.g. - kmod-openvswitch from Linux upstream - kmod-openvswitch-intree from openvswitch source code where both provides virtual package "kmod-openvswitch" for userspace packages to select and depend on Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
* odhcp6c: add client fqdn and reconfigure optionspacien2018-09-082-3/+9
| | | | | | | | Allowing DHCPV6_CLIENT_FQDN and DHCPV6_ACCEPT_RECONFIGURE to be turned off. Defaulting to false, former behavior remains unchanged. Signed-off-by: pacien <pacien.trangirard@pacien.net> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
* ar71xx: fix switch probing on kernel 4.14Koen Vandeputte2018-09-071-0/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bump to 4.14 changed the way mdio probes behind switches. While the board_info is added to the list, the code that actually inserted the list info into the phydev structure was missing. This resulted in non-working ethernet ports. Re-add it to fix switch probing. This mimics the exact behaviour as it was in kernel 4.9. Before: [ 1.066007] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0 [ 1.073409] Atheros AR8216/AR8236/AR8316: probe of ag71xx-mdio.0:00 failed with error -22 [ 1.102455] libphy: ag71xx_mdio: probed [ 1.737938] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Generic PHY] [ 1.747994] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII [ 2.377642] ag71xx-mdio.1: Found an AR934X built-in switch [ 2.429938] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII After: [ 11.163357] libphy: Fixed MDIO Bus: probed [ 11.319898] libphy: ag71xx_mdio: probed [ 11.360844] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0 [ 12.447398] libphy: ag71xx_mdio: probed [ 13.077402] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316] [ 13.088989] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII [ 13.717716] ag71xx-mdio.1: Found an AR934X built-in switch [ 13.769990] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* gdb: bump to 8.2Koen Vandeputte2018-09-073-11/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | *** Changes in GDB 8.2 Support for the following target has been added: RiscV ELF (riscv*-*-elf) Support for following targets and native configurations has been removed: m88k running OpenBSD (m88*-*-openbsd*) SH-5/SH64 ELF (sh64-*-elf*) SH-5/SH64 (sh*) SH-5/SH64 running GNU/Linux (sh*-*-linux*) SH-5/SH64 running OpenBSD (sh*-*-openbsd*) Various Python API enhancements Aarch64/Linux enhancements: SVE support. Hardware watchpoints improvements for entities stored at unaligned addresses. New "c" response to disable the pager for the rest of the current command. C expressions can now use _Alignof, and C++ expressions can now use alignof. Improved flexibility for loading symbol files. The 'info proc' command nows works on running processes on FreeBSD systems as well as core files created on FreeBSD systems. A new --enable-codesign=CERT configure option to automatically codesign GDB after build (useful on MacOS X). Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* toolchain/gdb: bump to 8.2Koen Vandeputte2018-09-073-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | *** Changes in GDB 8.2 Support for the following target has been added: RiscV ELF (riscv*-*-elf) Support for following targets and native configurations has been removed: m88k running OpenBSD (m88*-*-openbsd*) SH-5/SH64 ELF (sh64-*-elf*) SH-5/SH64 (sh*) SH-5/SH64 running GNU/Linux (sh*-*-linux*) SH-5/SH64 running OpenBSD (sh*-*-openbsd*) Various Python API enhancements Aarch64/Linux enhancements: SVE support. Hardware watchpoints improvements for entities stored at unaligned addresses. New "c" response to disable the pager for the rest of the current command. C expressions can now use _Alignof, and C++ expressions can now use alignof. Improved flexibility for loading symbol files. The 'info proc' command nows works on running processes on FreeBSD systems as well as core files created on FreeBSD systems. A new --enable-codesign=CERT configure option to automatically codesign GDB after build (useful on MacOS X). Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* mac80211: backport upstream fixesKoen Vandeputte2018-09-0714-8/+679
| | | | | | | | | | Backport most significant upstream fixes (excl. hwsim fixes) Refreshed all patches. Contains important fixes for CSA (Channel Switch Announcement) and A-MSDU frames. Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.14 to 4.14.68Koen Vandeputte2018-09-0725-241/+164
| | | | | | | | | | | | | | | | Refreshed all patches. Remove upstream accepted: - 330-Revert-MIPS-BCM47XX-Enable-74K-Core-ExternalSync-for.patch Altered: - 303-v4.16-netfilter-nf_tables-remove-multihook-chains-and-fami.patch - 308-mips32r2_tune.patch Compile-tested on: cns3xxx, imx6 Runtime-tested on: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 4.9 to 4.9.125Koen Vandeputte2018-09-074-6/+6
| | | | | | | | | Refreshed all patches. Compile-tested on: ar71xx Runtime-tested on: ar71xx Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* kernel: bump 3.18 to 3.18.121Koen Vandeputte2018-09-072-3/+3
| | | | | | | | | Refreshed all patches. Compile-tested on: adm5120 Runtime-tested on: none Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
* ramips: add support for TP-Link TL-MR3020 v3Carlo Nel2018-09-065-0/+165
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | TP-Link TL-MR3020 v3 is a pocket-size router based on MediaTek MT7628N. This PR is based on the work of @meyergru[1], with his permission. Specification: - MediaTek MT7628N/N (575 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz - 1x 10/100 Mbps Ethernet Flash instruction: The only way to flash the image in TL-MR3020 v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.225/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-tplink_tl-mr3020-v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with the LAN port, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. [1] https://github.com/meyergru/lede-source/commits/TL-MR3020-V3 Signed-off-by: Carlo Nel <carlojnel@gmail.com>
* ath79: fix unaligned access panic in ag71xx_mdio_probeMatt Merhar2018-09-061-2/+2
| | | | | | | | | | | Without "syscon" being present in an ag71xx ethernet DT node's compatible property, a panic occurs at boot during probe citing "Unhandled kernel unaligned access". With this modification, the panic no longer occurs and instead the probe simply fails, allowing the boot process to continue. Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
* ath79: add syscon compatible property to ar7100 ethernet nodesMatt Merhar2018-09-062-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | This adds "syscon" to the compatible properties for the eth0/eth1 nodes in ar7100.dtsi. Without this, a kernel panic is encountered on boot with some ar7100 boards. This for some reason wasn't an issue for the WNDR3800, which uses a Realtek switch chipset, but the panic was encountered on the RouterStation Pro (using an AR8216 switch) and some other boards that haven't yet been merged. The panic message mentions an unaligned access and happens in ag71xx_mdio_probe in drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c. Even if the unaligned access is fixed, the ag71xx_mdio probe still fails without the "syscon" property. This was already being worked around in ar7161_ubnt_routerstation-pro.dts by overriding the compatible property, so this commit removes that as well. All of the other ath79 .dtsi already have this property, so no changes are needed elsewhere. Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
* ramips: drop obsolete sd card driver codeMathias Kresin2018-09-062-20/+4
| | | | | | | | | | | | | | | | | The pinmux for all SoCs using this driver is now set via the pinmux. It makes this code obsolete. Some of the code targeting the mt76x8 SoCs is still required. The sd card pins share the pads with the EPHY. These pads need to be switched to digital mode if the pins are used for sd cards. The eMMC 8-bit mode has to be enabled via pinmux instead of a kernel option. The uart2 group need to be set to function "sdxc d5 d4", pwm1 to "sdxc d6" and pwm0 to "sdxc d7" to do so. It can't be done by as part of a default pinmux, as it would break the normal operation of uart2. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add mt7620/1 sdhci pinmuxMathias Kresin2018-09-068-16/+13
| | | | | | | Set the pins to the required mode via the pinmux driver. It allows to get rid of the pinmux related code in the sd card driver. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: fix mt7620a ND/SD pins pinmuxesMathias Kresin2018-09-064-4/+4
| | | | | | | | | | Drop the nd_sd gpio pinmux in case sdcard is used. They're mutually exclusive and for most of the boards not even used as GPIOs. If the pins are in sdcard mode, the pins ND_WE_N and ND_CS_N are still GPIOs (#45 and #46). Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: reference node by labelMathias Kresin2018-09-061-4/+4
| | | | | | Reference the HC5661A sdhci node by label instead of by the full path. Signed-off-by: Mathias Kresin <dev@kresin.me>
* ramips: add rt3352 SPI_CS1 pinmuxMathias Kresin2018-09-061-0/+45
| | | | | | | | The rt3352 has a pin that can be used as second spi chip select, watchdog reset or GPIO. The pinmux setup was missing the definition of said pin but it is already used in the SoC dtsi. Signed-off-by: Mathias Kresin <dev@kresin.me>
* dnsmasq: allow dnsmasq variants to be included in imageHenrique de Moraes Holschuh2018-09-061-0/+2
| | | | | | | | | | | The dnsmasq variants should provide dnsmasq, otherwise it is impossible to include them in the image. This change allows one to have CONFIG_PACKAGE_dnsmasq=m and CONFIG_PACKAGE_dnsmasq-full=y, e.g. because you want DNSSEC support, or IPSETs suport on your 3000-devices fleet ;-) Signed-off-by: Henrique de Moraes Holschuh <henrique@nic.br>
* dnsmasq: bump to dnsmasq v2.80test5Hans Dedecker2018-09-064-132/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Refresh patches Remove 240-ubus patch as upstream accepted. Add uci option ubus which allows to enable/disable ubus support (enabled by default) Upstream commits since last bump: da8b651 Implement --address=/example.com/# c5db8f9 Tidy 7f876b64c22b2b18412e2e3d8506ee33e42db7c 974a6d0 Add --caa-record b758b67 Improve logging of RRs from --dns-rr. 9bafdc6 Tidy up file parsing code. 97f876b Properly deal with unaligned addresses in DHCPv6 packets. cbfbd17 Fix broken DNSSEC records in previous. b6f926f Don't return NXDOMAIN to empty non-terminals. c822620 Add --dhcp-name-match 397c050 Handle case of --auth-zone but no --auth-server. 1682d15 Add missing EDNS0 section. EDNS0 section missing in replies to EDNS0-containing queries where answer generated from --local=/<domain>/ dd33e98 Fix crash parsing a --synth-domain with no prefix. Problem introduced in 2.79/6b2b564ac34cb3c862f168e6b1457f9f0b9ca69c c16d966 Add copyright to src/metrics.h 1dfed16 Remove C99 only code. 6f835ed Format fixes - ubus.c 9d6fd17 dnsmasq.c fix OPT_UBUS option usage 8c1b6a5 New metrics and ubus files. 8dcdb33 Add --enable-ubus option. aba8bbb Add collection of metrics caf4d57 Add OpenWRT ubus patch Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* strace: fix build on aarch64Stijn Tintel2018-09-051-0/+4
| | | | | | | | | | | | As of version 4.21, strace enforces mpers by default. The current implementation of aarch64 compat in strace assumes it's identical to ARMv7 EABI and therefore tries to enable m32 personality support. As there is no -m32 support on aarch64, this causes the build to fail. Restore previous strace behavior to fix build on aarch64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be> Tested-by: Karl Palsson <karlp@tweak.net.au>
* odhcpd: bump to git HEAD (detect broken hostnames)Hans Dedecker2018-09-051-4/+4
| | | | | | | 881f66b odhcpd: detect broken hostnames 3e17fd9 config: fix odhcpd_attrs array size Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* imx6: use BUILD_DEVICES in uboot-imx6 for mx6cuboxiFelix Fietkau2018-09-052-1/+3
| | | | | | Fixes build with the default profile Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: rename Generic profile to Default, fixes u-boot image build issueFelix Fietkau2018-09-051-4/+4
| | | | | | | u-boot.mk checks for the Default profile to build images for all targets. This brings the target default profile in sync with other targets Signed-off-by: Felix Fietkau <nbd@nbd.name>
* wireguard: bump to 0.0.20180904Jason A. Donenfeld2018-09-051-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | * Kconfig: use new-style help marker * global: run through clang-format * uapi: reformat * global: satisfy check_patch.pl errors * global: prefer sizeof(*pointer) when possible * global: always find OOM unlikely Tons of style cleanups. * crypto: use unaligned helpers We now avoid unaligned accesses for generic users of the crypto API. * crypto: import zinc More style cleanups and a rearrangement of the crypto routines to fit how this is going to work upstream. This required some fairly big changes to our build system, so there may be some build errors we'll have to address in subsequent snapshots. * compat: rng_is_initialized made it into 4.19 We therefore don't need it in the compat layer anymore. * curve25519-hacl64: use formally verified C for comparisons The previous code had been proved in Z3, but this new code from upstream KreMLin is directly generated from the F*, which is preferable. The assembly generated is identical. * curve25519-x86_64: let the compiler decide when/how to load constants Small performance boost. * curve25519-arm: reformat * curve25519-arm: cleanups from lkml * curve25519-arm: add spaces after commas * curve25519-arm: use ordinary prolog and epilogue * curve25519-arm: do not waste 32 bytes of stack * curve25519-arm: prefix immediates with # This incorporates ASM nits from upstream review. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
* mpc85xx: add migration script for TP-Link TL-WDR4900 v1 WLAN PCI pathsMatthias Schiffer2018-09-041-0/+63
| | | | | | | | | | PCI paths of the WLAN devices have changed between kernel 4.4 and 4.9; migrate config so existing wifi-iface definitions don't break. This is implemented as a hotplug handler rather than a uci-defaults script as the migration script must run before the 10-wifi-detect hotplug handler. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
* hostapd: fix build of wpa-supplicant-p2pAlexander Couzens2018-09-031-0/+1
| | | | | | | VARIANT:= got removed by accident. Fixes: 3838b16943c6 ("hostapd: fix conflicts hell") Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
* imx6: extend cubox support to hummingboard, add support for building full imagesFelix Fietkau2018-09-033-12/+54
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* imx6: enable f2fs and loopback support in preparation for squashfs with ↵Felix Fietkau2018-09-032-1/+8
| | | | | | overlay support Signed-off-by: Felix Fietkau <nbd@nbd.name>
* build: add support for enabling the rootfs/boot partition size option via ↵Felix Fietkau2018-09-033-2/+10
| | | | | | target feature Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx6: fall back to MMC for SPL if boot mode is invalidFelix Fietkau2018-09-031-0/+26
| | | | | | Fixes boot on Hummingboard Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx6: remove obsolete patchFelix Fietkau2018-09-031-87/+0
| | | | Signed-off-by: Felix Fietkau <nbd@nbd.name>
* uboot-imx6: install images into STAGING_DIR_IMAGEFelix Fietkau2018-09-031-0/+7
| | | | | | Will be used by a new combined image for cubox Signed-off-by: Felix Fietkau <nbd@nbd.name>
* ramips: ethernet: unify tx descriptor buffer splittingFelix Fietkau2018-09-031-75/+83
| | | | | | | | A buffer is split into multiple descriptors if it exceeds 16 KB. Apply the same split for the skb head as well (to deal with corner cases on fraglist support) Signed-off-by: Felix Fietkau <nbd@nbd.name>
* nghttp2: bump to 1.33.0Hans Dedecker2018-09-031-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 9d843334 Update bash_completion 23cb3f38 Update manual pages 1d682dcd Bump up version number to 1.33.0, LT revision to 31:0:17 601fbbb4 Update doc f44aa246 Update AUTHORS dd74a6dd Update manual pages e959e733 src: Refactor utos fb9a204d nghttpx: Fix compile error without mruby cd096802 Update doc 7417fd71 nghttpx: Per-pattern not per-backend 2d1a981c Merge branch 'akonskarm-master' 45acc922 clang-format 214d0899 Merge branch 'master' of https://github.com/akonskarm/nghttp2 into akonskarm-master 31fd707d nghttpx: Fix broken healthmon frontend 9a2e38e0 fix code for reuse addr on asio client d24527e7 Bump up LT revision due to v1.32.1 release 6195d747 nghttpx: Share mruby context if it is compiled from same file fb97f596 nghttpx: Allocate mruby file because fopen requires NULL terminated string 0ccc7a77 nghttpx: Move blocked request data to request buffer for API request 32826466 nghttpx: Fix crash with API request 0422f8a8 nghttpx: Fix worker process crash with neverbleed write error e329479a Merge pull request #1215 from nghttp2/mruby-per-backend f80a7873 Merge branch 'akonskarm-reuse_addr' 866ac6ab add option reuse addr in local endpoint configuration of asio client b574ae6a nghttpx: Support per-backend mruby script de4fd7cd doc: Update doc 32d7883c nghttpx: Downstream::request_buf_full: take into account blocked_request_buf_ 9b24e197 nghttpx: Choose h1 protocol if headers have been sent to backend on retry 13ffece1 Merge pull request #1214 from nghttp2/fix-rst-without-dconn 9d5b781d Fix stream reset if data from client is arrived before dconn is attached Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* iproute2: update cake man pageKevin Darbyshire-Bryant2018-08-312-3/+81
| | | | | | | | | | | CAKE supports overriding of its internal classification of packets through the tc filter mechanism. Update the man page in our package, even though we don't build them. Someone may find the documentation useful. Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk> (cherry picked from commit 30598a05385b0ac2380dd4f30037a9f9d0318cf2)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 22:27:08 +0000