aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* uboot-mediatek: unifi6lr: mtd erase before write to flashChen Minqiang2021-04-281-2/+2
| | | | | | | | Erase firmware ereas before writing to recovery or production partition when updating them via the bootloader menu. Signed-off-by: Chen Minqiang <ptpt52@gmail.com> Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* arm-trusted-firmware-mediatek: fix boot hang on unifi-6-lrDaniel Golle2021-04-281-3/+3
| | | | | | | | | | | | The Ubiquiti Networks UniFi 6 LR access point comes with a total of 512 MB RAM provided by 2x 8-bit DDR3 SDRAM. This combination lead to problems with the DDR calibration on boot resulting in occasional hang on boot. Use updated calibration binary provided by MediaTek to make boot on that device more reliable. The binary has also been tested on the BananaPi BPi-R64 board and that also works just fine with the new binary. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mac80211: minstrel_ht: fix issue in calculating success probabilityFelix Fietkau2021-04-281-0/+21
| | | | | | | Missing braces in a macro were leading to badly working rates sometimes getting a success probabilty of 1.0 Signed-off-by: Felix Fietkau <nbd@nbd.name>
* iwinfo: update to latest Git HEADDavid Bauer2021-04-281-4/+4
| | | | | | | | 50b64a6 iwinfo: add basic IEEE 802.11ax support 70d2136 iwinfo: nl80211: perform split wiphy dump cd23727 iwinfo: cli: fix hwmode formatting Signed-off-by: David Bauer <mail@david-bauer.net>
* ath79: add missing kernel config symbolStijn Tintel2021-04-251-0/+1
| | | | | | | | | | Commit f724a583dcf7 updated the nand-rb4xx driver to the 5.10 testing kernel, but forgot to add the new kernel config symbol it introduces to the 5.10 config. Fixes: f724a583dcf7 ("ath79: mikrotik: update nand-rb4xx driver") Reported-by: Russell Senior <russell@personaltelco.net> Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* dnsmasq: add ignore hosts dir to dnsmasq init scriptJoão Henriques2021-04-241-1/+6
| | | | | | | | When running multiple instances of dnsmasq, for example one being for the lan and another for a guest network, it might not be desirable to have the same dns names configured in both networks Signed-off-by: João Henriques <joaoh88@gmail.com>
* nat46: update to git HEADHans Dedecker2021-04-241-3/+3
| | | | | | | | | 9df230a Zero checksum handling (#25) 7688102 skip generating a UDP4 csum if the UDP6 csum is 0 and zero_csum_pass is set 4a9e4b1 zero csum: avoid calling the checksum adjustment function if udp csum is zero 2de14c5 add a module argument to skip checksum adjust for UDP if checksum is zero Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
* bpftools: update to v5.11.16, simplify makeTony Ambardar2021-04-242-16/+7
| | | | | | | | | | | | | | | | Update to the latest stable upstream version. Drop unneeded make variables to remove redundant assignments seen during invocation of package Makefile. Also remove the following patch now included upstream: * 200-fix-install-param-order-on-macos.patch Compile and run-tested on malta/mips32be, using bpftool directly and also libbpf (linked with tc) to inspect and load simple eBPF programs. Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* bpftools: fix feature override for masking clangTony Ambardar2021-04-241-1/+1
| | | | | | | | | Rename feature variable clang-bpf-global-var following upstream changes. This restores the HAVE_CLANG feature override and should avoid rare build errors where a recent host clang and BTF-enabled host kernel are present. Fixes: 23be333401f0 ("bpftools: update to 5.10.10") Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* image: use portable filename in 'append-image-stage'Daniel Golle2021-04-241-2/+2
| | | | | | | | | | | The 'append-image-stage' command doesn't work when setting the EXTRA_IMAGE_NAME option of the ImageBuilder as in that case DEVICE_IMG_PREFIX is modified and no longer matches the value it had in buildroot. Choose a filename independent of DEVICE_IMG_PREFIX for images staged using 'append-image-stage' to fix that. Fixes: de4b29dab9 ("image: introduce 'append-image-stage' build command") Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: bpi-r64: fix sdcard.img.gz in ImageBuilderDaniel Golle2021-04-231-1/+1
| | | | | | | | Generating the sdcard.img.gz file requires the initramfs/recovery image to be present. Use the newly introduced 'append-image-stage' build command to fix the ImageBuilder for the BPi-R64. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* image: introduce 'append-image-stage' build commandDaniel Golle2021-04-231-0/+12
| | | | | | | | | | | Similar to 'append-image' this new command appends an existing binary. 'append-image-stage' also makes a copy of that binary and keeps it in $(STAGING_DIR_IMAGE). When called from within the ImageBuilder, this copy is used instead of expecting the binary to be present. This is useful for artifacts which include the initramfs/recovery image which is usually not included in the ImageBuilder. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* mediatek: mt7622: build AHCI driver as moduleDaniel Golle2021-04-231-1/+0
| | | | | | | | | Build the driver for the in-SoC AHCI SATA host as module, just like for the other subtargets. No board requires booting off SATA, so we don't need to have it built-in. All boards with SATA support already select kmod-ata-ahci-mtk which provides the module. Signed-off-by: Daniel Golle <daniel@makrotopia.org>
* ccache: update to 4.2.1DENG Qingfang2021-04-232-3/+3
| | | | | | | Update ccache to 4.2.1 Signed-off-by: DENG Qingfang <dqfext@gmail.com> Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [refresh patch]
* kernel: bump 5.10 to 5.10.32Rui Salvaterra2021-04-2213-68/+32
| | | | | | | | | | | | | | | | | | | | Deleted (reverse-appliable): mediatek/patches-5.10/360-mtd-rawnand-mtk-Fix-WAITRDY-break-condition-and-time.patch Automatically refreshed: ath79/patches-5.10/0036-GPIO-add-named-gpio-exports.patch generic/backport-5.10/600-v5.12-net-extract-napi-poll-functionality-to-__napi_poll.patch generic/backport-5.10/601-v5.12-net-implement-threaded-able-napi-poll-loop-support.patch generic/backport-5.10/602-v5.12-net-add-sysfs-attribute-to-control-napi-threaded-mod.patch generic/backport-5.10/603-v5.12-net-fix-race-between-napi-kthread-mode-and-busy-poll.patch generic/pending-5.10/600-netfilter_conntrack_flush.patch generic/pending-5.10/613-netfilter_optional_tcp_window_check.patch generic/pending-5.10/680-NET-skip-GRO-for-foreign-MAC-addresses.patch generic/pending-5.10/768-net-dsa-mv88e6xxx-Request-assisted-learning-on-CPU-port.patch lantiq/patches-5.10/0030-GPIO-add-named-gpio-exports.patch ramips/patches-5.10/800-GPIO-add-named-gpio-exports.patch Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* iproute2: avoid unneeded compiles to speed buildingTony Ambardar2021-04-224-3/+31
| | | | | | | | | | | | | | | | | | | | | | | Skip building Makefile targets that aren't packaged: tipc, dcb, ifstat, rtacct, lnstat, and man. Also, only compile targets needed for the current build variant i.e. don't compile 'tc' when building an 'ip' variant and vice versa. These changes reduce typical build times by over 30%: $ make package/iproute2/clean && time make -j8 package/iproute2/compile (old) ... real 2m24.985s user 3m12.537s sys 0m26.677s (new) ... real 1m36.945s user 2m8.734s sys 0m20.046s Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
* kernel: drop the conntrack rtcache patchRui Salvaterra2021-04-224-566/+8
| | | | | | | | | | It's in backports-5.4, but it wasn't ever merged. Upstream followed another approach, with flow offloading, which has much better performance. Drop this obsolete patch and refresh the kernel patches. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com> Acked-by: Stijn Tintel <stijn@linux-ipv6.be> Acked-by: Felix Fietkau <nbd@nbd.name>
* treewide: switch the timer frequency to 100 HzRui Salvaterra2021-04-2163-122/+4
| | | | | | | | Some targets select HZ=100, others HZ=250. There's no reason to select a higher timer frequency (and 100 Hz are available in every architecture), so change all targets to 100 Hz. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* treewide: remove redundant ubifs kconfig symbolsRui Salvaterra2021-04-2133-114/+0
| | | | | | | For the targets which enable ubifs, these symbols are already part of the generic kconfigs. Drop them from the target kconfigs. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: enable lzo, zlib and zstd in ubifsRui Salvaterra2021-04-212-4/+8
| | | | | | | | Make sure all compression algorithms are enabled, for the time being, in order not to break sysupgrade. In the future, we'd like to disable all except zstd, as it's the best all-around performer. Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* kernel: default to zstd compression in ubifsRui Salvaterra2021-04-212-0/+50
| | | | | | | | | | Compared to both lzo and zlib, zstd is the best all-around performer. Backport a kernel patch [1] (to both 5.4 and 5.10), in order to set it as default for ubifs, if available. [1] https://lore.kernel.org/linux-mtd/CAFLxGvwhtRY-6kT-sN=AgjvyssHb5qdTS6WQHkhKu3YrPuTkdw@mail.gmail.com/ Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
* bcm53xx: fix Luxul XWR-3150 LAN ports numberingRafał Miłecki2021-04-211-1/+1
| | | | | | | Port numbers were reverted. Fixes: c459a6bf482f ("bcm53xx: add support for Luxul FullMAC WiFi devices") Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
* uboot-rockchip: update to v2021.04David Bauer2021-04-205-671/+31
| | | | | | | | | Update the uboot-rockchip to the latest upstream release. Remove upstreamed patches. Tested-on: FriendlyElec NanoPi R2S Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: move patch to backport after upstreamingIlya Lipnitskiy2021-04-201-4/+9
| | | | | | | | | The patch is now in net-next so keep it in backport-5.10 to keep things more organized. Link: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=6ecaf81d4ac6365f9284f9d68d74f7c209e74f98 Cc: Daniel Golle <daniel@makrotopia.org> Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com>
* kernel/generic: add missing config symbolStijn Tintel2021-04-191-0/+1
| | | | Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* gemini: Bump to kernel v5.10Linus Walleij2021-04-184-1/+600
| | | | | | | | | Only two patches against mainline remains. Switch to v5.10 which works very nicely with all Gemini devices. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [backported don't disable option CONFIG_BPF_SYSCAL] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
* octeon: add 5.10 as testing kernelStijn Tintel2021-04-189-1/+478
| | | | | | | Remove upstreamed parts from 100-ubnt_edgerouter2_support.patch. Compile and runtime tested on Ubiquiti EdgeRouter Lite. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
* ramips: fix at803x patchDavid Bauer2021-04-181-7/+7
| | | | | | | | | | This patch broke while refreshing on a kernel bump. It adds the config_aneg function twice to the AR8035 PHY now. Restore the old behavior to restore the patches original intent. Fixes commit 57e32650efa4 ("kernel: bump 5.10 to 5.10.31") Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: use alternative CID pathDavid Bauer2021-04-181-1/+1
| | | | | | | | | | Use an alternative path to access the CID of the SD card in MMC0, used for the generation of MAC addresses. With Kernel 5.10, the device name of the MMC controller changed, breaking MAC address generation. The new path is compatible with Kernel 5.4 as well as Kernel 5.10. Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: add missing config symbolsDavid Bauer2021-04-181-0/+5
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* rockchip: fix kernel 5.10 built for RockPi 4David Bauer2021-04-181-0/+10
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* generic: add missing config symbolsDavid Bauer2021-04-182-0/+13
| | | | Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: select kmod-backlight as dependency for kmod-drmDavid Bauer2021-04-181-1/+1
| | | | | | | | | | | | | Select kmod-backlight as dependency for kmod-drm in case kmod-backlight is compiled. This fixes kernel 5.10 build issues on x86-geode with all kmods enabled: Package kmod-drm is missing dependencies for the following libraries: backlight.ko Signed-off-by: David Bauer <mail@david-bauer.net>
* kernel: netdev: make kmod-of-mdio conflict with x86David Bauer2021-04-181-1/+1
| | | | | | | | CONFIG_MDIO_OF depends on CONFIG_OF which is not enabled for x86. Fixes builds of x86 with Kernel 5.10 due to unresolved dependencies. Signed-off-by: David Bauer <mail@david-bauer.net>
* x86: amd-xgbe: add missing dependencies on 5.10Chuanhong Guo2021-04-181-1/+1
| | | | | | | | | fix the following build error when building with test kernel: Package kmod-amd-xgbe is missing dependencies for the following libraries: mdio_devres.ko Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
* uboot-envtools: mvebu: add Buffalo LS421DEDaniel González Cabanelas2021-04-171-0/+3
| | | | | | | | The Buffalo Linkstation LS421DE NAS lacks an uboot env config file. Create it via scripts. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* x86/64: Add support for AMD SOC Ethernet controllerZheng Bao2021-04-172-1/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This feature is already supported in kernel. Add definition and configuration in Makefile of OpenWRT. It is tested on board Dibbler with processor V1605B. Dmesg is as below. -------------------------------------------- [ 0.317122] smpboot: CPU0: AMD Ryzen Embedded V1605B with Radeon Vega Gfx (family: 0x17, model: 0x11, stepping: 0x0) [ 8.227270] libphy: amd-xgbe-mii: probed [ 8.228189] amd-xgbe 0000:02:00.1 eth0: net device enabled [ 8.228999] libphy: amd-xgbe-mii: probed [ 8.229921] amd-xgbe 0000:02:00.2 eth1: net device enabled ..... [ 11.760869] br-lan: port 1(eth0) entered blocking state [ 11.761365] br-lan: port 1(eth0) entered disabled state [ 11.762019] device eth0 entered promiscuous mode [ 11.785285] 8021q: adding VLAN 0 to HW filter on device eth1 [ 16.881431] amd-xgbe 0000:02:00.1 eth0: Link is Up - 1Gbps/Full - flow control off [ 16.882108] br-lan: port 1(eth0) entered blocking state [ 16.882583] br-lan: port 1(eth0) entered forwarding state [ 16.883249] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready ----------------------------------------------- Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
* ath79: mikrotik: update nand-rb4xx driverRoger Pueyo Centelles2021-04-174-12/+98
| | | | | | | | | | | | | | | This updates the NAND driver for MikroTik RB4XX series to work with kernel 5.10, similarly to the ar934x-nand driver (fb64e2c3). Support for kernel 5.10 was added to all ath79 subtargets except for the mikrotik one by commit d6b785d, since patch 920-mikrotik-rb4xx.patch needed to be reworked. Later, commit f8512661 enabled kernel 5.10 for the mikrotik subtarget with the nand-rb4xx driver still pending, which is updated and added back by this patch. Compile-tested only. Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>
* mvebu: Fix sysupgrade for GL.iNet GL-MV1000Sven Eckelmann2021-04-171-0/+3
| | | | | | | | | | | The GL.iNet GL-MV1000 is booting from eMMC and the images for it are in theory sysupgrade compatible. But the platform upgrade scripts were not adjusted to select the mmcblock device as upgrade target. This resulted in a failed sysupgrade because the mtd device (NOR flash) was instead tried to be modified by the sysupgrade script. Fixes: 050c24f05c85 ("mvebu: add support for GL.iNet GL-MV1000") Signed-off-by: Sven Eckelmann <sven@narfation.org>
* mvebu: armada 370: dts: fix the crypto engineDaniel González Cabanelas2021-04-172-0/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The crypto engine in Armada 370 SoCs is currently broken. It can be checked installing the required packages for testing openssl with hw acceleration: opkg install openssl-util opkg install kmod-cryptodev opkg install libopenssl-devcrypto After configuring /etc/ssl/openssl.cnf to let openssl use the crypto engine for digest operations, and performing some checksums.. md5sum 10M-file.bin openssl md5 10M-file.bin ...we can see they don't match. There might be an alignment or size constraint issue caused by the idle-sram area. Use the whole crypto sram and disable the idle-sram area to fix it. Also disable the idle support by adding the broken-idle property to prevent accessing the disabled idle-sram. We don't care about disabling the idle support since it is already broken in Armada 370 causing a huge performance loss because it disables permanently the L2 cache. This was reported in the Openwrt forum and elsewhere by Debian users with different board models. Signed-off-by: Daniel González Cabanelas <dgcbueu@gmail.com>
* ramips: replace mt7621s hack with upstream patchIlya Lipnitskiy2021-04-174-68/+80
| | | | | | | | | | | | | | Refresh patches. Tested on a dual-core MT7621 device (Ubiquiti ER-X) and a single-core MT7621 device (Netgear R6220). This change will make future kernel upgrades easier (avoids conflicts with upstream). Link: https://lore.kernel.org/lkml/20210407200738.149207-1-ilya.lipnitskiy@gmail.com/ Signed-off-by: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Chuanhong Guo <gch981213@gmail.com>
* ramips: reduce spi-max-frequency for Xiaomi MI Router 4AGDavid Bentham2021-04-171-1/+1
| | | | | | | | | | | | | | | | | | | | | | | Reduce spi-max-frequency for Xiaomi MI Router 4AG model Xiaomi MI Router 4AG MTD uses two flash chips (no specific on router versions when produced from factory) - GD25Q128C and W25Q128BV. These flash chips are capable of high frequency, but due to poor board design or manufacture process. We are seeing the following errors in the linux kernel bootup: `spi-nor spi0.0: unrecognized JEDEC id bytes: cc 60 1c cc 60 1c spi-nor: probe of spi0.0 failed with error -2` This causes the partitions not to be detected `VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6` Then creates a bootloop and a bricked router. The solution to limit this race condition is to reduce the frequency from 80 mhz to 50 mhz. Signed-off-by: David Bentham <db260179@gmail.com>
* archs38: set device vendor and model variablesMoritz Warning2021-04-171-0/+2
| | | | | | This fixes the profiles.json output. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* arc770: set device vendor and model variablesMoritz Warning2021-04-171-0/+2
| | | | | | This fixes the profiles.json output. Signed-off-by: Moritz Warning <moritzwarning@web.de>
* toolchain/gdb: fix compilation with ccacheRosen Penev2021-04-171-0/+1
| | | | | | | | | | For some reason, one of the configure checks results in some infinite loop and ends up spawning endless gcc processes, causing OOM. Just pass a configure var to avoid it. Same fix as 6e23813c1ed7494a9da3b5e59cfcafd71097c420 Signed-off-by: Rosen Penev <rosenp@gmail.com>
* kernel/modules: move act_gact into kmod-sched-coreDENG Qingfang2021-04-171-2/+2
| | | | | | | As the name suggests, act_gact has the generic actions such as dropping and accepting packets, so move it into kmod-sched-core. Signed-off-by: DENG Qingfang <dqfext@gmail.com>
* linux-firmware: ath10k: add support for Qualcomm Atheros QCA9377Josef Schlehofer2021-04-171-0/+17
| | | | | | | | | Add firmware and board file for Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter (rev 31) recognized as [168c:0042]. This card supports standard 1x1 802.11ac Wave2, BT5, and MU-MIMO. Signed-off-by: Josef Schlehofer <pepe.schlehofer@gmail.com>
* ltq-vdsl-app: extent dsl metrics with state_num and power_state_numFlorian Eckert2021-04-171-14/+58
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With the old ubus dsl API, the numbers for the individual line_states and power_states were also returned. These were not ported to the new DSL C-API. This commit adds the missing information. For this the internal values are mapped to numbers. * additional JSON output for state_num: "state_num": <map_state_number> Since not all values are meaningful only the following values are implemented, this can be extended if the future. * LSTATE_MAP_NOT_INITIALIZED * LSTATE_MAP_EXCEPTION * LSTATE_MAP_IDLE * LSTATE_MAP_SILENT * LSTATE_MAP_HANDSHAKE * LSTATE_MAP_FULL_INIT * LSTATE_MAP_SHOWTIME_NO_SYNC * LSTATE_MAP_SHOWTIME_TC_SYNC * LSTATE_MAP_RESYNC * additinal JSON output for power_level: "power_state_num": <map_power_satte_number>, Since there are not so many here, all are mapped. * PSTATE_MAP_NA, * PSTATE_MAP_L0, * PSTATE_MAP_L1, * PSTATE_MAP_L2, * PSTATE_MAP_L3, Signed-off-by: Florian Eckert <fe@dev.tdt.de> v6: Add state LSTATE_MAP_NOT_INITILIZED at the beginning of the list Start the list LSTATE_MAP with -1 Reviewed-by: Andre Heider <a.heider@gmail.com>
* kernel: Disable IXP4xx physmap by defaultLinus Walleij2021-04-171-0/+1
| | | | | | | | This makes no sense on anything but the IXP4xx platform that we do not even support anymore. If we bring it back, it can be selectively enabled for that platform only. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* kernel: Disable CPU_THERMAL by defaultLinus Walleij2021-04-172-1/+1
| | | | | | | | | | | This config is for platforms that have: A) CONFIG_THERMAL set (we disable it by default) B) Has thermal zones that need to control cpufreq This is not suitable for default config, it needs to be enabled on a per-target basis in individual configs. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-20 05:42:55 +0000